| Age | Commit message (Collapse) | Author |
|---|
|
In the SSB SPROM a field set to all ones means the value
is not defined in the SPROM.
In case of the boardflags, we need to set them to zero
to avoid confusing drivers. Drivers will only check the
flags by ANDing.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Gabor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This adds more workarounds for devices with broken BT bits.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The HostFlags are a bitmask of 48bit. So we must use an u64 datatype
to hold all bits.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This adds a workaround for invalid bluetooth SPROM settings
on ASUS PCI cards.
This will stop the microcode from poking with the BT GPIO line.
This fixes data transmission on this device, as the BT GPIO line
is used for something TX related on this device
(probably the power amplifier or the radio).
This also adds a modparam knob to help debugging this in the future,
as more devices with this bug may show up.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This updates the mac80211 maintainers entry to
1) remove Jiri
2) put me first
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Michael Wu <flamingice@sourmilk.net>
Cc: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
There are two structures named wmm_info and wmm_param, they are used while
parsing the beacon frame. (Check the function ieee802_11_parse_elems).
Certain APs like D-link does not set the fifth bit in WMM IE.
While sending the association request to n-only ap it checks for wmm_ie.
If it is set then only ieee80211_ht_cap is sent during association request.
So n-only association fails.
And this patch fixes this problem by copying the wmm_info to wmm_ie,
which enables the "wmm" flag in iee80211_send_assoc.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Acked-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This is a patch to use the hardware ECC controller of
the AT91SAM9260 and AT91SAM9263 for the AT91 nand.
On AT91 NAND, there's now a choice between ECC soft,
ECC hard or no ECC (for debug).
It has been tested on AT91SAM9263 with 8 bits large
and small page NAND.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
|
Currently, knfsd only clears the setuid bit if the owner of a file is
changed on a SETATTR call, and only clears the setgid bit if the group
is changed. POSIX says this in the spec for chown():
"If the specified file is a regular file, one or more of the
S_IXUSR, S_IXGRP, or S_IXOTH bits of the file mode are set, and the
process does not have appropriate privileges, the set-user-ID
(S_ISUID) and set-group-ID (S_ISGID) bits of the file mode shall
be cleared upon successful return from chown()."
If I'm reading this correctly, then knfsd is doing this wrong. It should
be clearing both the setuid and setgid bit on any SETATTR that changes
the uid or gid. This wasn't really as noticable before, but now that the
ATTR_KILL_S*ID bits are a no-op for the NFS client, it's more evident.
This patch corrects the nfsd_setattr logic so that this occurs. It also
does a bit of cleanup to the function.
There is also one small behavioral change. If a SETATTR call comes in
that changes the uid/gid and the mode, then we now only clear the setgid
bit if the group execute bit isn't set. The setgid bit without a group
execute bit signifies mandatory locking and we likely don't want to
clear the bit in that case. Since there is no call in POSIX that should
generate a SETATTR call like this, then this should rarely happen, but
it's worth noting.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
...it's not really needed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: Suppress a harmless compiler warning.
Index rq_pages[] with an unsigned type. Make "pages" unsigned as well,
as it never represents a value less than zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: Suppress a harmless compiler warning in the RPC server related
to array indices.
ARRAY_SIZE() returns a size_t, so use unsigned type for a loop index when
looping over arrays.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: Update the RPC server's TCP record marker decoder to match the
constructs used by the RPC client's TCP socket transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Use the 2.6 method for disabling TCP Nagle in the kernel's RPC server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
When svc_recv returns an unexpected error, lockd will print a warning
and exit. This problematic for several reasons. In particular, it will
cause the reference counts for the thread to be wrong, and can lead to a
potential BUG() call.
Rather than exiting on error from svc_recv, have the thread do a 1s
sleep and then retry the loop. This is unlikely to cause any harm, and
if the error turns out to be something temporary then it may be able to
recover.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
When svc_recv returns an unexpected error, nfs_callback_svc will print a
warning and exit. This problematic for several reasons. In particular,
it will cause the reference counts for the thread to be wrong, and no
new thread will be started until all nfs4 mounts are unmounted.
Rather than exiting on error from svc_recv, have the thread do a 1s
sleep and then retry the loop. This is unlikely to cause any harm, and
if the error turns out to be something temporary then it may be able to
recover.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
The raw field's size can vary so we use a zero sized array since
gcc will not allow a variable sized array inside a union. This
has been tested with ext3 and gfs2 and relates to the bug
report: http://lkml.org/lkml/2007/10/24/374 and discussion
thread: http://lkml.org/lkml/2008/4/7/65
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
There's no need to dynamically allocate this memory, and doing so may
create the possibility of races on shutdown of the rpc client. (We've
witnessed it only after adding rpcsec_gss support to the server, after
which the rpc code can send destroys calls that expect to still be able
to access the rpc_stats structure after it has been destroyed.)
Such races are in theory possible if the module containing this "static"
memory is removed very quickly after an rpc client is destroyed, but
we haven't seen that happen.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Now that the nfs4 callback thread uses the kthread API, there are no
more users of svc_create_thread(). Remove it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Obvious comment nit.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
As of 5996a298da43a03081e9ba2116983d173001c862 ("NLM: don't unlock on
cancel requests") we no longer unlock in this case, so the comment is no
longer accurate.
Thanks to Stuart Friedberg for pointing out the inconsistency.
Cc: Stuart Friedberg <sfriedberg@hp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Also, sort the Kbuild file.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
g_make_token_header() and g_token_size() add two too many, and
therefore their callers pass in "(logical_value - 2)" rather
than "logical_value" as hard-coded values which causes confusion.
This dates back to the original g_make_token_header which took an
optional token type (token_id) value and added it to the token.
This was removed, but the routine always adds room for the token_id
rather than not.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Consistently use unsigned (u32 vs. s32) for seqnum.
In get_mic function, send the local copy of seq_send,
rather than the context version.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: Because NFSD_V4 "depends on" NFSD_V3, it appears as a child of
the NFSD_V3 menu entry, and is not visible if NFSD_V3 is unselected.
Replace the dependency on NFSD_V3 with a "select NFSD_V3". This makes
NFSD_V4 look and work just like NFS_V3, while ensuring that NFSD_V3 is
enabled if NFSD_V4 is.
Sam Ravnborg adds:
"This use of select is questionable. In general it is bad to select
a symbol with dependencies.
In this case the dependencies of NFSD_V3 are duplicated for NFSD_V4
so we will not se erratic configurations but do you remember to
update NFSD_V4 when you add a depends on NFSD_V3?
But I see no other clean way to do it right now."
Later he said:
"My comment was more to say we have things to address in kconfig.
This is abuse in the acceptable range."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Recently, commit 440bcc59 added a reverse dependency to fs/Kconfig to
ensure that PROC_FS was enabled if SUNRPC_GSS was enabled.
Apparently this isn't necessary because the auth_gss components under
net/sunrpc will build correctly even if PROC_FS is disabled, though
RPCSEC_GSS will not work without /proc.
It also violates the guideline in Documentation/kbuild/kconfig-language.txt
that states "In general use select only for non-visible symbols (no prompts
anywhere) and for symbols with no dependencies."
To address these issues, remove the dependency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Recently, commit 440bcc59 added a reverse dependency to fs/Kconfig to
ensure that PROC_FS was enabled if NFSD_V4 was enabled.
There is a guideline in Documentation/kbuild/kconfig-language.txt that
states "In general use select only for non-visible symbols (no prompts
anywhere) and for symbols with no dependencies."
A quick grep around other Kconfig files reveals that no entry currently
uses "select PROC_FS" -- every one uses "depends on". Thus CONFIG_NFSD_V4
should use "depends on PROC_FS" as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Move the code that actually parses the filehandle and looks up the
dentry and export to a separate function. This simplifies the reference
counting a little and moves fh_verify() a little closer to the kernel
ideal of small, minimally-indentended functions. Clean up a few other
minor style sins along the way.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
|
|
net/sunrpc/svc.c: In function '__svc_create_thread':
net/sunrpc/svc.c:587: warning: 'oldmask.bits[0u]' may be used uninitialized in this function
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Tom Tucker <tom@opengridcomputing.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
cleanup: When adding new encryption types, the checksum length
can be different for each enctype. Face the fact that the
current code only supports DES which has a checksum length of 8.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
cleanup: Fix grammer/typos to use "too" instead of "to"
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
SVCRDMA: Add check for XPT_CLOSE in svc_rdma_send
The svcrdma transport can crash if a send is waiting for an
empty SQ slot and the connection is closed due to an asynchronous error.
The crash is caused when svc_rdma_send attempts to send on a deleted
QP.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
While lease is correctly checked by supplying the type argument to
vfs_setlease(), it's stored with fl_type uninitialized. This breaks the
logic when checking the type of the lease. The fix is to initialize
fl_type.
The old code still happened to function correctly since F_RDLCK is zero,
and we only implement read delegations currently (nor write
delegations). But that's no excuse for not fixing this.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Add some instructions for using the new NFS/RDMA features.
Signed-off-by: James Lentini <jlentini@netapp.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
There's a general push to convert kernel threads to use the (much
cleaner) kthread API. This patch converts the NFSv4 callback kernel
thread to the kthread API. In addition to being generally cleaner this
also removes the dependency on signals when shutting down the thread.
Note that this patch depends on the recent patches to svc_recv() to
make it check kthread_should_stop() periodically. Those patches are
in Bruce's tree at the moment and are slated for 2.6.26 along with
the lockd conversion, so this conversion is probably also appropriate
for 2.6.26.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
fs/nfsd/vfs.c:991:27: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Add extern to nfsd/nfsd.h
fs/nfsd/nfssvc.c:146:5: warning: symbol 'nfsd_nrthreads' was not declared. Should it be static?
fs/nfsd/nfssvc.c:261:5: warning: symbol 'nfsd_nrpools' was not declared. Should it be static?
fs/nfsd/nfssvc.c:269:5: warning: symbol 'nfsd_get_nrthreads' was not declared. Should it be static?
fs/nfsd/nfssvc.c:281:5: warning: symbol 'nfsd_set_nrthreads' was not declared. Should it be static?
fs/nfsd/export.c:1534:23: warning: symbol 'nfs_exports_op' was not declared. Should it be static?
Add include of auth.h
fs/nfsd/auth.c:27:5: warning: symbol 'nfsd_setuser' was not declared. Should it be static?
Make static, move forward declaration closer to where it's needed.
fs/nfsd/nfs4state.c:1877:1: warning: symbol 'laundromat_main' was not declared. Should it be static?
Make static, forward declaration was already marked static.
fs/nfsd/nfs4idmap.c:206:1: warning: symbol 'idtoname_parse' was not declared. Should it be static?
fs/nfsd/vfs.c:1156:1: warning: symbol 'nfsd_create_setattr' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
There's no reason for a mutex here, except to allow an allocation under
the lock, which we can avoid with the usual trick of preallocating
memory for the new object and freeing it if it turns out to be
unnecessary.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Use list_for_each_entry(). Also, in keeping with kernel style, make the
normal case (kzalloc succeeds) unindented and handle the abnormal case
with a goto.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
The sm_count is decremented to zero but left on the nsm_handles list.
So in the space between decrementing sm_count and acquiring nsm_mutex,
it is possible for another task to find this nsm_handle, increment the
use count and then enter nsm_release itself.
Thus there's nothing to prevent the nsm being freed before we acquire
nsm_mutex here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
In function svcauth_gss_accept() (net/sunrpc/auth_gss/svcauth_gss.c) the
code that handles GSS integrity and decryption failures should be
returning GARBAGE_ARGS as specified in RFC 2203, sections 5.3.3.4.2 and
5.3.3.4.3.
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Harshula Jayasuriya <harshula@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
fs/lockd/svcshare.c:74:50: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
This patch makes the needlessly global nfsd_create_setattr() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
svc_recv() calls alloc_page(), and if it fails it does a 500ms
uninterruptible sleep and then reattempts. There doesn't seem to be any
real reason for this to be uninterruptible, so change it to an
interruptible sleep. Also check for kthread_stop() and signalled() after
setting the task state to avoid races that might lead to sleeping after
kthread_stop() wakes up the task.
I've done some very basic smoke testing with this, but obviously it's
hard to test the actual changes since this all depends on an
alloc_page() call failing.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
As far as I can tell, selecting the CRYPTO and CRYPTO_MD5 entries under
CONFIG_NFSD is redundant, since CONFIG_NFSD_V4 already selects
RPCSEC_GSS_KRB5, which selects these entries.
Testing with "make menuconfig" shows that the entries under CRYPTO still
properly reflect "Y" or "M" based on the setting of CONFIG_NFSD after this
change is applied.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: since NFSD_V2_ACL is a boolean, it can be selected safely
under the NFSD_V3_ACL entry (also a boolean).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: since FS_POSIX_ACL is a non-visible boolean entry, it can be
selected safely under the NFSD_V4 entry (also a boolean).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: refresh the help text for Kconfig items related to the NFS
server. Remove obsolete URLs, and make the language consistent among
the options.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Likewise, distros usually leave CONFIG_NFSD_TCP enabled.
TCP support in the Linux NFS server is stable enough that we can leave it
on always. CONFIG_NFSD_TCP adds about 10 lines of code, and defaults to
"Y" anyway.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
The code here is difficult to understand; attempt to clarify somewhat by
pulling out one of the more mystifying conditionals into a separate
function.
While we're here, also add lease_time to the list of attributes that we
don't really need to cross a mountpoint to fetch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
|
|
This field is set once and never used; probably some artifact of an
earlier implementation idea.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
