| Age | Commit message (Collapse) | Author |
|---|
|
The metadata saved in the ADS is read by GuC when it's initialized.
Saving the addresses to the LRCs when they are populated is too late as
GuC will keep using the old ones.
This was causing GuC to use the RCS LRC for any engine class. It's not a
big problem on a Linux-only scenario since the they are used by GuC only
on media engines when the watchdog is triggered. However, in a
virtualization scenario with Windows as the VF, it causes the wrong LRCs
to be loaded as the watchdog is used for all engines.
Fix it by letting guc_golden_lrc_init() initialize the metadata, like
other *_init() functions, and later guc_golden_lrc_populate() to copy
the LRCs to the right places. The former is called before the second GuC
load, while the latter is called after LRCs have been recorded.
Cc: Chee Yin Wong <chee.yin.wong@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Chee Yin Wong <chee.yin.wong@intel.com>
Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c31a0b6402d15b530514eee9925adfcb8cfbb1c9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert a reset patch that broke VFIO passthrough because devices
ended up with no available reset mechanisms (Alex Williamson)
* tag 'pci-v6.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Avoid reset when disabled via sysfs"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417084043.GA365738@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc3:
- Fix DP DSC configurations that require 3 DSC engines per pipe
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87fri7p8tp.fsf@intel.com
|
|
Pull bcachefs fixes from Kent Overstreet:
"Usual set of small fixes/logging improvements.
One bigger user reported fix, for inode <-> dirent inconsistencies
reported in fsck, after moving a subvolume that had been snapshotted"
* tag 'bcachefs-2025-04-17' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix snapshotting a subvolume, then renaming it
bcachefs: Add missing READ_ONCE() for metadata replicas
bcachefs: snapshot_node_missing is now autofix
bcachefs: Log message when incompat version requested but not enabled
bcachefs: Print version_incompat_allowed on startup
bcachefs: Silence extent_poisoned error messages
bcachefs: btree_root_unreadable_and_scan_found_nothing now AUTOFIX
bcachefs: fix bch2_dev_usage_full_read_fast()
bcachefs: Don't print data read retry success on non-errors
bcachefs: Add missing error handling
bcachefs: Prevent granting write refs when filesystem is read-only
|
|
Pull vfio fix from Alex Williamson:
- Include devices where the platform indicates PCI INTx is not routed
by setting pdev->irq to zero in the expanded virtualization of the
PCI pin register. This provides consistency in the INFO and SET_IRQS
ioctls (Alex Williamson)
* tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Virtualize zero INTx PIN if no pdev->irq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more device specific fixes plus one trivial quirk.
There's a couple of patches for Tegra which avoid some fairly
spectacular log spam if the hardware breaks in ways which were
actually seen in production, plus a fix for the i.MX driver to
propagate errors properly when setting up the hardware.
We also have a trivial patch marking the sun4i driver as being
compatible with GPIO chip selects"
* tag 'spi-fix-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: Add check for spi_imx_setupxfer()
spi: tegra210-quad: add rate limiting and simplify timeout error message
spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts
spi: sun4i: add support for GPIO chip select lines
|
|
ftrace_graph_ent.depth is int, but ftrace_graph_ent_entry.depth is
unsigned long. This confuses trace-cmd on 64-bit big-endian systems and
makes it print a huge amount of spaces. Fix this by using unsigned int,
which has a matching size, instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-2-iii@linux.ibm.com
Fixes: ff5c9c576e75 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The subops processing creates new hashes when adding and removing subops.
There were some places that the old hashes that were replaced were not
freed and this caused some memory leaks.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417135939.245b128d@gandalf.local.home
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's several locations that free a ftrace hash pointer but may be
referenced again. Reset them to EMPTY_HASH so that a u-a-f bug doesn't
happen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417110933.20ab718b@gandalf.local.home
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The reworking to fix and simplify the ftrace_startup_subops() and the
ftrace_shutdown_subops() made it possible for the filter_hash and
notrace_hash variables to be used uninitialized in a way that the compiler
did not catch it.
Initialize both filter_hash and notrace_hash to the EMPTY_HASH as that is
what they should be if they never are used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417104017.3aea66c2@gandalf.local.home
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Closes: https://lore.kernel.org/all/1db64a42-626d-4b3a-be08-c65e47333ce2@linux.ibm.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
|
|
Subvolume roots and the dirents that point to them are special; they
don't obey the normal snapshot versioning rules because they cross
snapshot boundaries.
We don't keep around older versions of subvolume dirents on rename - we
don't need to, because subvolume dirents are only visible in the parent
subvolume, and we wouldn't be able to match up the different dirent and
inode versions due to crossing the snapshot ID boundary.
That means that when we rename a subvolume, that's been snapshotted, the
older version of the subvolume root will become dangling - it won't have
a dirent that points to it.
That's expected, we just need to tell fsck that this is ok.
Fixes: https://github.com/koverstreet/bcachefs/issues/856
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
kbuf imports have the front offset adjusted and segments removed, but
the tail segments are still included in the segment count that gets
passed in the iov_iter. As the segments aren't necessarily all the
same size, move importing to a separate helper and iterate the
mapped length to get an exact count.
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Android has mounted the v1 cpuset controller using filesystem type
"cpuset" (not "cgroup") since 2015 [1], and depends on the resulting
behavior where the controller name is not added as a prefix for cgroupfs
files. [2]
Later, a problem was discovered where cpu hotplug onlining did not
affect the cpuset/cpus files, which Android carried an out-of-tree patch
to address for a while. An attempt was made to upstream this patch, but
the recommendation was to use the "cpuset_v2_mode" mount option
instead. [3]
An effort was made to do so, but this fails with "cgroup: Unknown
parameter 'cpuset_v2_mode'" because commit e1cba4b85daa ("cgroup: Add
mount flag to enable cpuset to use v2 behavior in v1 cgroup") did not
update the special cased cpuset_mount(), and only the cgroup (v1)
filesystem type was updated.
Add parameter parsing to the cpuset filesystem type so that
cpuset_v2_mode works like the cgroup filesystem type:
$ mkdir /dev/cpuset
$ mount -t cpuset -ocpuset_v2_mode none /dev/cpuset
$ mount|grep cpuset
none on /dev/cpuset type cgroup (rw,relatime,cpuset,noprefix,cpuset_v2_mode,release_agent=/sbin/cpuset_release_agent)
[1] https://cs.android.com/android/_/android/platform/system/core/+/b769c8d24fd7be96f8968aa4c80b669525b930d3
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libprocessgroup/setup/cgroup_map_write.cpp;drc=2dac5d89a0f024a2d0cc46a80ba4ee13472f1681;l=192
[3] https://lore.kernel.org/lkml/f795f8be-a184-408a-0b5a-553d26061385@redhat.com/T/
Fixes: e1cba4b85daa ("cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just a single fix for the Xen multicall driver avoiding a percpu
variable referencing initdata by its initializer"
* tag 'for-linus-6.15a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix multicall debug feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
|
|
When adding folio_memcg function call in the zram module for
Android16-6.12, the following error occurs during compilation:
ERROR: modpost: "cgroup_mutex" [../soc-repo/zram.ko] undefined!
This error is caused by the indirect call to lockdep_is_held(&cgroup_mutex)
within folio_memcg. The export setting for cgroup_mutex is controlled by
the CONFIG_PROVE_RCU macro. If CONFIG_LOCKDEP is enabled while
CONFIG_PROVE_RCU is not, this compilation error will occur.
To resolve this issue, add a parallel macro CONFIG_LOCKDEP control to
ensure cgroup_mutex is properly exported when needed.
Signed-off-by: gao xu <gaoxu2@honor.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello:
"Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor."
* tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
|
|
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
|
|
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/10666429.nUPlyArG6x@rjwysocki.net
|
|
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
|
|
Commit 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update")
Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
|
|
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
100Mbps
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit <5518f239aff1> ("iommu/vt-d: Move scalable mode ATS enablement to
probe path") changed the PCI ATS enablement logic to run earlier,
specifically before the default domain attachment.
On some client platforms, this change resulted in boot failures, causing
the kernel to panic with the following message and call trace:
Kernel panic - not syncing: DMAR hardware is malfunctioning
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc3+ #175
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
dump_stack+0x10/0x16
panic+0x10a/0x2b7
iommu_enable_translation.cold+0xc/0xc
intel_iommu_init+0xe39/0xec0
? trace_hardirqs_on+0x1e/0xd0
? __pfx_pci_iommu_init+0x10/0x10
pci_iommu_init+0xd/0x40
do_one_initcall+0x5b/0x390
kernel_init_freeable+0x26d/0x2b0
? __pfx_kernel_init+0x10/0x10
kernel_init+0x15/0x120
ret_from_fork+0x35/0x60
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1a/0x30
RIP: 1f0f:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 841f0f2e66 ORIG_RAX:
1f0f2e6600000000
RAX: 0000000000000000 RBX: 1f0f2e6600000000 RCX:
2e66000000000084
RDX: 0000000000841f0f RSI: 000000841f0f2e66 RDI:
00841f0f2e660000
RBP: 00841f0f2e660000 R08: 00841f0f2e660000 R09:
000000841f0f2e66
R10: 0000000000841f0f R11: 2e66000000000084 R12:
000000841f0f2e66
R13: 0000000000841f0f R14: 2e66000000000084 R15:
1f0f2e6600000000
</TASK>
---[ end Kernel panic - not syncing: DMAR hardware is malfunctioning ]---
Fix this by reverting the timing change for ATS enablement introduced by
the offending commit and restoring the previous behavior.
Fixes: 5518f239aff1 ("iommu/vt-d: Move scalable mode ATS enablement to probe path")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Closes: https://lore.kernel.org/linux-iommu/01b9c72f-460d-4f77-b696-54c6825babc9@linux.intel.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250416073608.1799578-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In the review for iommu_copy_struct_to_user() helper, Matt pointed out that
a NULL pointer should be rejected prior to dereferencing it:
https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com
And Alok pointed out a typo at the same time:
https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com
Since both issues were copied from iommu_copy_struct_from_user(), fix them
first in the current header.
Fixes: e9d36c07bb78 ("iommu: Add iommu_copy_struct_from_user helper")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Link: https://lore.kernel.org/r/20250414191635.450472-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
Link: https://lore.kernel.org/r/20250325092259.392844-1-Pavel.Paklov@cyberprotect.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Sending exact nr_segs, avoids bio split check and processing in
block layer, which takes around 5%[1] of overall CPU utilization.
In our setup, we see overall improvement of IOPS from 7.15M to 7.65M [2]
and 5% less CPU utilization.
[1]
3.52% io_uring [kernel.kallsyms] [k] bio_split_rw_at
1.42% io_uring [kernel.kallsyms] [k] bio_split_rw
0.62% io_uring [kernel.kallsyms] [k] bio_submit_split
[2]
sudo taskset -c 0,1 ./t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B1 -n2
-r4 /dev/nvme0n1 /dev/nvme1n1
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
[Pavel: fixed for kbuf, rebased and reworked on top of cleanups]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7a1a49a8d053bd617c244291d63dbfbc07afde36.1744882081.git.asml.silence@gmail.com
[axboe: fold in fix factoring in buf reg offset]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following batch contains one Netfilter fix for net:
1) conntrack offload bit is erroneously unset in a race scenario,
from Florian Westphal.
netfilter pull request 25-04-17
* tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix erronous removal of offload bit
====================
Link: https://patch.msgid.link/20250417102847.16640-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
io_import_fixed is a mess. Even though we know the final len of the
iterator, we still assign offset + len and do some magic after to
correct for that.
Do offset calculation first and finalise it with iov_iter_bvec at the
end.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2d5107fed24f8b23245ef2ede9a5a7f7c426df61.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Kernel registered buffers are special because segments are not uniform
in size, and we have a bunch of optimisations based on that uniformity
for normal buffers. Handle kbuf separately, it'll be cleaner this way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4e9e5990b0ab5aee723c0be5cd9b5bcf810375f9.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't optimise for requests with offset=0. Large registered buffers are
the preference and hence the user is likely to pass an offset, and the
adjustments are not expensive and will be made even cheaper in following
patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1c2beb20470ee3c886a363d4d8340d3790db19f3.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
From PMU's perspective, Panther Lake is similar to the previous
generation Lunar Lake. Both are hybrid platforms, with e-core and
p-core.
The key differences are the ARCH PEBS feature and several new events.
The ARCH PEBS is supported in the following patches.
The new events will be supported later in perf tool.
Share the code path with the Lunar Lake. Only update the name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-2-dapeng1.mi@linux.intel.com
|
|
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f5838c ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
|
|
The below code would always unconditionally clear other status bits like
perf metrics overflow bit once PEBS buffer overflows:
status &= intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
This is incorrect. Perf metrics overflow bit should be cleared only when
fixed counter 3 in PEBS counter group. Otherwise perf metrics overflow
could be missed to handle.
Closes: https://lore.kernel.org/all/20250225110012.GK31462@noisy.programming.kicks-ass.net/
Fixes: 7b2c05a15d29 ("perf/x86/intel: Generic support for hardware TopDown metrics")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-1-dapeng1.mi@linux.intel.com
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.15
- fix scan failure for non-ANA multipath controllers (Hannes Reinecke)
- fix multipath sysfs links creation for some cases (Hannes Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)"
* tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme:
nvmet: pci-epf: cleanup link state management
nvmet: pci-epf: clear CC and CSTS when disabling the controller
nvmet: pci-epf: always fully initialize completion entries
nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free()
nvme-multipath: sysfs links may not be created for devices
nvme: fixup scan failure for non-ANA multipath controllers
|
|
We've never supported StreamID aliasing between devices, and as such
they will never have had functioning DMA, but this is not fatal to the
SMMU itself. Although aliasing between hard-wired platform device
StreamIDs would tend to raise questions about the whole system, in
practice it's far more likely to occur relatively innocently due to
legacy PCI bridges, where the underlying StreamID mappings are still
perfectly reasonable.
As such, return a more benign -ENODEV when failing probe for such an
unsupported device (and log a more obvious error message), so that it
doesn't break the entire SMMU probe now that bus_iommu_probe() runs in
the right order and can propagate that error back. The end result is
still that the device doesn't get an IOMMU group and probably won't
work, same as before.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/39d54e49c8476efc4653e352150d44b185d6d50f.1744380554.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ASPEED VGA card has two built-in devices:
0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)
0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)
Its toplogy looks like this:
+-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0 Sandisk Corp Device 5017
| +-01.0-[04]--
| +-02.0-[05]----00.0 NVIDIA Corporation Device
| +-03.0-[06-07]----00.0-[07]----00.0 ASPEED Technology, Inc. ASPEED Graphics Family
| +-04.0-[08]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
| \-05.0-[09]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
\-00.1 PMC-Sierra Inc. Device 4028
The IORT logic populaties two identical IDs into the fwspec->ids array via
DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().
Though the SMMU driver had been able to handle this situation since commit
563b5cbe334e ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that
got broken by the later commit cdf315f907d4 ("iommu/arm-smmu-v3: Maintain
a SID->device structure"), which ended up with allocating separate streams
with the same stuffing.
On a kernel prior to v6.15-rc1, there has been an overlooked warning:
pci 0008:07:00.0: vgaarb: setting as boot VGA device
pci 0008:07:00.0: vgaarb: bridge control possible
pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pcieport 0008:06:00.0: Adding to iommu group 14
ast 0008:07:00.0: stream 67328 already in tree <===== WARNING
ast 0008:07:00.0: enabling device (0002 -> 0003)
ast 0008:07:00.0: Using default configuration
ast 0008:07:00.0: AST 2600 detected
ast 0008:07:00.0: [drm] Using analog VGA
ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device
With v6.15-rc, since the commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing
into the proper probe path"), the error returned with the warning is moved
to the SMMU device probe flow:
arm_smmu_probe_device+0x15c/0x4c0
__iommu_probe_device+0x150/0x4f8
probe_iommu_group+0x44/0x80
bus_for_each_dev+0x7c/0x100
bus_iommu_probe+0x48/0x1a8
iommu_device_register+0xb8/0x178
arm_smmu_device_probe+0x1350/0x1db0
which then fails the entire SMMU driver probe:
pci 0008:06:00.0: Adding to iommu group 21
pci 0008:07:00.0: stream 67328 already in tree
arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
Since SMMU driver had been already expecting a potential duplicated Stream
ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master()
routine to ignore a duplicated ID from the fwspec->sids array as well.
Note: this has been failing the iommu_device_probe() since 2021, although a
recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to
fail the SMMU driver probe. Since nobody has cared about DMA Alias support,
leave that as it was but fix the fundamental iommu_device_probe() breakage.
Fixes: cdf315f907d4 ("iommu/arm-smmu-v3: Maintain a SID->device structure")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250415185620.504299-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
UBSan caught a bug with IOMMU SVA domains, where the reported exponent
value in __arm_smmu_tlb_inv_range() was >= 64.
__arm_smmu_tlb_inv_range() uses the domain's pgsize_bitmap to compute
the number of pages to invalidate and the invalidation range. Currently
arm_smmu_sva_domain_alloc() does not setup the iommu domain's
pgsize_bitmap. This leads to __ffs() on the value returning 64 and that
leads to undefined behaviour w.r.t. shift operations
Fix this by initializing the iommu_domain's pgsize_bitmap to PAGE_SIZE.
Effectively the code needs to use the smallest page size for
invalidation
Cc: stable@vger.kernel.org
Fixes: eb6c97647be2 ("iommu/arm-smmu-v3: Avoid constructing invalid range commands")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250412002354.3071449-1-balbirs@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 67e4fe398513 ("iommu/arm-smmu-v3: Use S2FWB for NESTED domains")
introduced S2FWB usage but omitted the corresponding feature detection.
As a result, vIOMMU allocation fails on FVP in arm_vsmmu_alloc(), due to
the following check:
if (!arm_smmu_master_canwbs(master) &&
!(smmu->features & ARM_SMMU_FEAT_S2FWB))
return ERR_PTR(-EOPNOTSUPP);
This patch adds the missing detection logic to prevent allocation
failure when S2FWB is supported.
Fixes: 67e4fe398513 ("iommu/arm-smmu-v3: Use S2FWB for NESTED domains")
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250408033351.1012411-1-aneesh.kumar@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
