summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-23platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI IDTodd Brandt
The ARL requires that the GMA and NPU devices both be in D3Hot in order for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition to the intel_pmc_core driver attempted to do this by switching them to D3 in the init and resume calls of the intel_pmc_core driver. The problem is the ARL-H/U have a different NPU device and thus are not being properly set and thus S0iX does not work properly in ARL-H/U. This patch creates a new ARL-H specific device id that is correct and also adds the D3 fixup to the suspend callback. This way if the PCI devies drop from D3 to D0 after resume they can be corrected for the next suspend. Thus there is no dropout in S0iX. Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver") Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-20platform/x86: think-lmi: Fix attribute name usage for non-compliant itemsMark Pearson
A few, quite rare, WMI attributes have names that are not compatible with filenames, e.g. "Intel VT for Directed I/O (VT-d)". For these cases the '/' gets replaced with '\' for display, but doesn't get switched again when doing the WMI access. Fix this by keeping the original attribute name and using that for sending commands to the BIOS Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250520005027.3840705-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-20platform/x86: thinkpad_acpi: Ignore battery threshold change event notificationMark Pearson
If user modifies the battery charge threshold an ACPI event is generated. Confirmed with Lenovo FW team this is only generated on user event. As no action is needed, ignore the event and prevent spurious kernel logs. Reported-by: Derek Barbosa <debarbos@redhat.com> Closes: https://lore.kernel.org/platform-driver-x86/7e9a1c47-5d9c-4978-af20-3949d53fb5dc@app.fastmail.com/T/#m5f5b9ae31d3fbf30d7d9a9d76c15fb3502dfd903 Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250517023348.2962591-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-15platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()Vladimir Moskovkin
If the 'buf' array received from the user contains an empty string, the 'length' variable will be zero. Accessing the 'buf' array element with index 'length - 1' will result in a buffer overflow. Add a check for an empty string. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: stable@vger.kernel.org Signed-off-by: Vladimir Moskovkin <Vladimir.Moskovkin@kaspersky.com> Link: https://lore.kernel.org/r/39973642a4f24295b4a8fad9109c5b08@kaspersky.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-15platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeysValtteri Koskivuori
The S2110 has an additional set of media playback control keys enabled by a hardware toggle button that switches the keys between "Application" and "Player" modes. Toggling "Player" mode just shifts the scancode of each hotkey up by 4. Add defines for new scancodes, and a keymap and dmi id for the S2110. Tested on a Fujitsu Lifebook S2110. Signed-off-by: Valtteri Koskivuori <vkoskiv@gmail.com> Acked-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-07platform/x86: asus-wmi: Fix wlan_ctrl_by_user detectionHans de Goede
The wlan_ctrl_by_user detection was introduced by commit a50bd128f28c ("asus-wmi: record wlan status while controlled by userapp"). Quoting from that commit's commit message: """ When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return (1) 0x00050001 (On) (2) 0x00050000 (Off) (3) 0x00030001 (On) (4) 0x00030000 (Off) (5) 0x00000002 (Unknown) (1), (2) means that the model has hardware GPIO for WLAN, you can call WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off. (3), (4) means that the model doesn’t have hardware GPIO, you need to use API or driver library to turn WLAN on/off, and call WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status. After you set WLAN LED status, you can see the WLAN status is changed with WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly (ex: Windows), you can use it for synchronization. (5) means that the model doesn’t have WLAN device. WLAN is the ONLY special case with upper rule. """ The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above) return values, but the flag mistakenly also gets set on laptops with 0x0005000? ((1), (2)) return values. This is causing rfkill problems on laptops where 0x0005000? is returned. Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000? return values. Fixes: a50bd128f28c ("asus-wmi: record wlan status while controlled by userapp") Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250501131702.103360-2-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-07platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA ↵Runhua He
(GX4HRXL) MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry. This happens regardless of whether the laptop is plugged into AC power, or whether any peripheral is plugged into the laptop. Similar to commit a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost instantly after s2idle suspend entry (IRQ1 is the keyboard): 2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9 2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1 Add this model to the spurious_8042 quirk to workaround this. This patch does not affect the wake-up function of the built-in keyboard. Because the firmware of this machine adds an insurance for keyboard wake-up events, as it always triggers an additional IRQ 9 to wake up the system. Suggested-by: Mingcong Bai <jeffbai@aosc.io> Suggested-by: Xinhui Yang <cyan@cyano.uk> Suggested-by: Rong Zhang <i@rong.moe> Fixes: a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166 Cc: Mario Limonciello <mario.limonciello@amd.com> Link: https://zhuanldan.zhihu.com/p/730538041 Tested-by: Yemu Lu <prcups@krgm.moe> Signed-off-by: Runhua He <hua@aosc.io> Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-07platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JASJohn Chau
Change get_thinkpad_model_data() to check for additional vendor name "NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps more). The reason of this works with minimal changes is because NEC Lavie X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be "LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version, the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W". I compiled and tested with my own machine, attached the dmesg below as proof of work: [ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W [ 6.307000] thinkpad_acpi: radio switch found; radios are enabled [ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 6.371963] thinkpad_acpi: secondary fan control detected & enabled [ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7) [ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13 Signed-off-by: John Chau <johnchau@0atlas.com> Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-29platform/x86/amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive driversSuma Hegde
amd_hsmp and hsmp_acpi are intended to be mutually exclusive drivers and amd_hsmp is for legacy platforms. To achieve this, it is essential to check for the presence of the ACPI device in plat.c. If the hsmp ACPI device entry is found, allow the hsmp_acpi driver to manage the hsmp and return an error from plat.c. Additionally, rename the driver from amd_hsmp to hsmp_acpi to prevent "Driver 'amd_hsmp' is already registered, aborting..." error in case both drivers are loaded simultaneously. Also, support both platform device based and ACPI based probing for family 0x1A models 0x00 to 0x0F, implement only ACPI based probing for family 0x1A, models 0x10 to 0x1F. Return false from legacy_hsmp_support() for this platform. This aligns with the condition check in is_f1a_m0h(). Link: https://lore.kernel.org/platform-driver-x86/aALZxvHWmphNL1wa@gourry-fedora-PF4VCD3F/ Fixes: 7d3135d16356 ("platform/x86/amd/hsmp: Create separate ACPI, plat and common drivers") Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Co-developed-by: Gregory Price <gourry@gourry.net> Signed-off-by: Gregory Price <gourry@gourry.net> Signed-off-by: Suma Hegde <suma.hegde@amd.com> Link: https://lore.kernel.org/r/20250425102357.266790-1-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-29drivers/platform/x86/amd: pmf: Check for invalid Smart PC PoliciesMario Limonciello
commit 376a8c2a14439 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA") added support for platforms that support an updated TA, however it also exposed a number of platforms that although they have support for the updated TA don't actually populate a policy binary. Add an explicit check that the policy binary isn't empty before initializing the TA. Reported-by: Christian Heusel <christian@heusel.eu> Closes: https://lore.kernel.org/platform-driver-x86/ae644428-5bf2-4b30-81ba-0b259ed3449b@heusel.eu/ Fixes: 376a8c2a14439 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Christian Heusel <christian@heusel.eu> Link: https://lore.kernel.org/r/20250423132002.3984997-3-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-29drivers/platform/x86/amd: pmf: Check for invalid sideloaded Smart PC PoliciesMario Limonciello
If a policy is passed into amd_pmf_get_pb_data() that causes the engine to fail to start there is a memory leak. Free the memory in this failure path. Fixes: 10817f28e5337 ("platform/x86/amd/pmf: Add capability to sideload of policy binary") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250423132002.3984997-2-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86: ideapad-laptop: add support for some new buttonsGašper Nemgar
Add entries to unsupported WMI codes in ideapad_keymap[] and one check for WMI code 0x13d to trigger platform_profile_cycle(). Signed-off-by: Gašper Nemgar <gasper.nemgar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250418070738.7171-1-gasper.nemgar@gmail.com [ij: joined nested if ()s & major tweaks to changelog] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86: asus-wmi: Disable OOBE state after resume from hibernationPavel Nikulin
ASUS firmware resets OOBE state during S4 suspend, so the keyboard blinks during resume from hibernation. This patch disables OOBE state after resume from hibernation. Signed-off-by: Pavel Nikulin <pavel@noa-labs.com> Link: https://lore.kernel.org/r/20250418140706.1691-1-pavel@noa-labs.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7Kurt Borja
Extend thermal control support to Alienware m15 R7. Cc: stable@vger.kernel.org Tested-by: Romain THERY <romain.thery@ik.me> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86/intel: hid: Add Pantherlake supportSaranya Gopal
Add Pantherlake ACPI device ID to the Intel HID driver. While there, clean up the device ID table to remove the ", 0" parts. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250421041332.830136-1-saranya.gopal@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-17platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad ↵Kurt Borja
error handling wmax_thermal_information() may also return -ENOMSG, which would leave `id` uninitialized in thermal_profile_probe. Reorder and modify logic to catch all errors. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/Z_-KVqNbD9ygvE2X@stanley.mountain Fixes: 27e9e6339896 ("platform/x86: alienware-wmi: Refactor thermal control methods") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250416-smatch-fix-v1-1-35491b462d8f@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-17platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplugShouye Liu
In certain situations, the sysfs for uncore may not be present when all CPUs in a package are offlined and then brought back online after boot. This issue can occur if there is an error in adding the sysfs entry due to a memory allocation failure. Retrying to bring the CPUs online will not resolve the issue, as the uncore_cpu_mask is already set for the package before the failure condition occurs. This issue does not occur if the failure happens during module initialization, as the module will fail to load in the event of any error. To address this, ensure that the uncore_cpu_mask is not set until the successful return of uncore_freq_add_entry(). Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part") Signed-off-by: Shouye Liu <shouyeliu@tencent.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-17platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cyclesMario Limonciello
When an APU exits HW sleep with no active wake sources the Linux kernel will rapidly assert that the APU can enter back into HW sleep. This happens in a few ms. Contrasting this to Windows, Windows can take 10s of seconds to enter back into the resiliency phase for Modern Standby. For some situations this can be problematic because it can cause leakage from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical design guide specifications. On some designs this will trip the over voltage protection feature (OVP) of the voltage regulator module, but it could cause APU damage as well. To prevent this risk, add an explicit sleep call so that future attempts to enter into HW sleep will have enough time to settle. This will occur while the screen is dark and only on cases that the APU should enter HW sleep again, so it shouldn't be noticeable to any user. Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-16platform/x86: msi-wmi-platform: Workaround a ACPI firmware bugArmin Wolf
The ACPI byte code inside the ACPI control method responsible for handling the WMI method calls uses a global buffer for constructing the return value, yet the ACPI control method itself is not marked as "Serialized". This means that calling WMI methods on this WMI device is not thread-safe, as concurrent WMI method calls will corrupt the global buffer. Fix this by serializing the WMI method calls using a mutex. Cc: stable@vger.kernel.org # 6.x.x: 912d614ac99e: platform/x86: msi-wmi-platform: Rename "data" variable Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver") Tested-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-15platform/x86: msi-wmi-platform: Rename "data" variableArmin Wolf
Rename the "data" variable inside msi_wmi_platform_read() to avoid a name collision when the driver adds support for a state container struct (that is to be called "data" too) in the future. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-15platform/x86: alienware-wmi-wmax: Extend support to more laptopsKurt Borja
Extend thermal control support to: - Alienware Area-51m R2 - Alienware m16 R1 - Alienware m16 R2 - Dell G16 7630 - Dell G5 5505 SE Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-15platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1Kurt Borja
Some users report the Alienware m16 R1 models, support G-Mode. This was manually verified by inspecting their ACPI tables. Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: amd: pmf: Fix STT limitsMario Limonciello
On some platforms it has been observed that STT limits are not being applied properly causing poor performance as power limits are set too low. STT limits that are sent to the platform are supposed to be in Q8.8 format. Convert them before sending. Reported-by: Yijun Shen <Yijun.Shen@dell.com> Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Cc: stable@vger.kernel.org Tested-by: Yijun Shen <Yijun_Shen@Dell.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()David Thompson
A warning is seen when running the latest kernel on a BlueField SOC: [251.512704] ------------[ cut here ]------------ [251.512711] invalid sysfs_emit: buf:0000000003aa32ae [251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8 The warning is triggered because the mlxbf-bootctl driver invokes "sysfs_emit()" with a buffer pointer that is not aligned to the start of the page. The driver should instead use "sysfs_emit_at()" to support non-zero offsets into the destination buffer. Fixes: 9886f575de5a ("platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()") Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250407132558.2418719-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V dataHans de Goede
The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both are x86 ACPI tablets which ships with Android x86 as factory OS. with a DSDT which contains a bunch of I2C devices which are not actually there, causing various resource conflicts. Enumeration of these is skipped through the acpi_quirk_skip_i2c_client_enumeration(). Extend the existing support for the 9V version by adding support for manually instantiating the I2C devices which are actually present on the 5V version by adding the necessary device info to the x86-android-tablets module. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250407092017.273124-2-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbolsHans de Goede
The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both need to be handled by the x86-android-tablets code. Add 9v to the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet symbols to prepare for adding support for the 5V version. All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250407092017.273124-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11asus-laptop: Fix an uninitialized variableDenis Arefev
The value returned by acpi_evaluate_integer() is not checked, but the result is not always successful, so it is necessary to add a check of the returned value. If the result remains negative during three iterations of the loop, then the uninitialized variable 'val' will be used in the clamp_val() macro, so it must be initialized with the current value of the 'curr' variable. In this case, the algorithm should be less noisy. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b23910c2194e ("asus-laptop: Pegatron Lucid accelerometer") Cc: stable@vger.kernel.org Signed-off-by: Denis Arefev <arefev@swemel.ru> Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-07platform/x86: intel_pmc_ipc: add option to build without ACPIDavid E. Box
Introduce a configuration option that allows users to build the intel_pmc_ipc driver without ACPI support. This is useful for systems where ACPI is not available or desired. Based on the discussion from the patch [1], it was necessary to provide this option to accommodate specific use cases. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20250227121522.1802832-6-yong.liang.choong@linux.intel.com/#26280764 [1] Signed-off-by: David E. Box <david.e.box@linux.intel.com> Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20250313085526.1439092-1-yong.liang.choong@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-06Linux 6.15-rc1v6.15-rc1Linus Torvalds
2025-04-06tools/include: make uapi/linux/types.h usable from assemblyThomas Weißschuh
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when included from assembly code. Mirror this behaviour in the tools/ variant. Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the toolchain automatically. Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06Merge tag 'turbostat-2025.05.06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - support up to 8192 processors - add cpuidle governor debug telemetry, disabled by default - update default output to exclude cpuidle invocation counts - bug fixes * tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: v2025.05.06 tools/power turbostat: disable "cpuidle" invocation counters, by default tools/power turbostat: re-factor sysfs code tools/power turbostat: Restore GFX sysfs fflush() call tools/power turbostat: Document GNR UncMHz domain convention tools/power turbostat: report CoreThr per measurement interval tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192 tools/power turbostat: Add idle governor statistics reporting tools/power turbostat: Fix names matching tools/power turbostat: Allow Zero return value for some RAPL registers tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
2025-04-06Merge tag 'soundwire-6.15-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT * tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
2025-04-06tools/power turbostat: v2025.05.06Len Brown
Support up to 8192 processors Add cpuidle governor debug telemetry, disabled by default Update default output to exclude cpuidle invocation counts Bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: disable "cpuidle" invocation counters, by defaultLen Brown
Create "pct_idle" counter group, the sofware notion of residency so it can now be singled out, independent of other counter groups. Create "cpuidle" group, the cpuidle invocation counts. Disable "cpuidle", by default. Create "swidle" = "cpuidle" + "pct_idle". Undocument "sysfs", the old name for "swidle", but keep it working for backwards compatibilty. Create "hwidle", all the HW idle counters Modify "idle", enabled by default "idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle") Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'perf-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Ingo Molnar: "Fix a perf events time accounting bug" * tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix child_total_time_enabled accounting bug at task exit
2025-04-06Merge tag 'sched-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix a nonsensical Kconfig combination - Remove an unnecessary rseq-notification * tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Eliminate useless task_work on execve sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
2025-04-06Disable SLUB_TINY for build testingLinus Torvalds
... and don't error out so hard on missing module descriptions. Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") we used to warn about missing module descriptions, but only when building with extra warnigns (ie 'W=1'). After that commit the warning became an unconditional hard error. And it turns out not all modules have been converted despite the claims to the contrary. As reported by Damian Tometzki, the slub KUnit test didn't have a module description, and apparently nobody ever really noticed. The reason nobody noticed seems to be that the slub KUnit tests get disabled by SLUB_TINY, which also ends up disabling a lot of other code, both in tests and in slub itself. And so anybody doing full build tests didn't actually see this failre. So let's disable SLUB_TINY for build-only tests, since it clearly ends up limiting build coverage. Also turn the missing module descriptions error back into a warning, but let's keep it around for non-'W=1' builds. Reported-by: Damian Tometzki <damian@riscv-rocks.de> Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/ Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06tools/power turbostat: re-factor sysfs codeLen Brown
Probe cpuidle "sysfs" residency and counts separately, since soon we will make one disabled on, and the other disabled off. Clarify that some BIC (build-in-counters) are actually "groups". since we're about to re-name some of those groups. no functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Restore GFX sysfs fflush() callZhang Rui
Do fflush() to discard the buffered data, before each read of the graphics sysfs knobs. Fixes: ba99a4fc8c24 ("tools/power turbostat: Remove unnecessary fflush() call") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Document GNR UncMHz domain conventionLen Brown
Document that on Intel Granite Rapids Systems, Uncore domains 0-2 are CPU domains, and uncore domains 3-4 are IO domains. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: report CoreThr per measurement intervalLen Brown
The CoreThr column displays total thermal throttling events since boot time. Change it to report events during the measurement interval. This is more useful for showing a user the current conditions. Total events since boot time are still available to the user via /sys/devices/system/cpu/cpu*/thermal_throttle/* Document CoreThr on turbostat.8 Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
2025-04-06tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192Justin Ernst
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output: "turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151" A similar error appears with the use of turbostat --cpu when the inputted cpu range contains a cpu number >= 1024: # turbostat -c 1100-1151 "--cpu 1100-1151" malformed ... Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS. It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low. For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS brings support for parsing cpu numbers >= 1024. Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64. Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'timers-cleanups-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A set of final cleanups for the timer subsystem: - Convert all del_timer[_sync]() instances over to the new timer_delete[_sync]() API and remove the legacy wrappers. Conversion was done with coccinelle plus some manual fixups as coccinelle chokes on scoped_guard(). - The final cleanup of the hrtimer_init() to hrtimer_setup() conversion. This has been delayed to the end of the merge window, so that all patches which have been merged through other trees are in mainline and all new users are catched. Doing this right before rc1 ensures that new code which is merged post rc1 is not introducing new instances of the original functionality" * tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/timers: Rename the hrtimer_init event to hrtimer_setup hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack() hrtimers: Rename debug_init() to debug_setup() hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns() hrtimers: Make callback function pointer private hrtimers: Merge __hrtimer_init() into __hrtimer_setup() hrtimers: Switch to use __htimer_setup() hrtimers: Delete hrtimer_init() treewide: Convert new and leftover hrtimer_init() users treewide: Switch/rename to timer_delete[_sync]()
2025-04-06Merge tag 'irq-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irq updates from Thomas Gleixner: "A set of updates for the interrupt subsystem: - A treewide cleanup for the irq_domain code, which makes the naming consistent and gets rid of the original oddity of naming domains 'host'. This is a trivial mechanical change and is done late to ensure that all instances have been catched and new code merged post rc1 wont reintroduce new instances. - A trivial consistency fix in the migration code The recent introduction of irq_force_complete_move() in the core code, causes a problem for the nostalgia crowd who maintains ia64 out of tree. The code assumes that hierarchical interrupt domains are enabled and dereferences irq_data::parent_data unconditionally. That works in mainline because both architectures which enable that code have hierarchical domains enabled. Though it breaks the ia64 build, which enables the functionality, but does not have hierarchical domains. While it's not really a problem for mainline today, this unconditional dereference is inconsistent and trivially fixable by using the existing helper function irqd_get_parent_data(), which has the appropriate #ifdeffery in place" * tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move() irqdomain: Stop using 'host' for domain irqdomain: Rename irq_get_default_host() to irq_get_default_domain() irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
2025-04-06Merge tag 'timers-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A revert to fix a adjtimex() regression: The recent change to prevent that time goes backwards for the coarse time getters due to immediate multiplier adjustments via adjtimex(), changed the way how the timekeeping core treats that. That change result in a regression on the adjtimex() side, which is user space visible: 1) The forwarding of the base time moves the update out of the original period and establishes a new one. That's changing the behaviour of the [PF]LL control, which user space expects to be applied periodically. 2) The clearing of the accumulated NTP error due to #1, changes the behaviour as well. An attempt to delay the multiplier/frequency update to the next tick did not solve the problem as userspace expects that the multiplier or frequency updates are in effect, when the syscall returns. There is a different solution for the coarse time problem available, so revert the offending commit to restore the existing adjtimex() behaviour" * tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
2025-04-06Merge tag 'sh-for-v6.15-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "One important fix and one small configuration update. The first patch by Artur Rojek fixes an issue with the J2 firmware loader not being able to find the location of the device tree blob due to insufficient alignment of the .bss section which rendered J2 boards unbootable. The second patch by Johan Korsnes updates the defconfigs on sh to drop the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete after 8c710f75256b ("net/sched: Retire tcindex classifier"). Summary: - sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX - sh: Align .bss section padding to 8-byte boundary" * tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX sh: Align .bss section padding to 8-byte boundary
2025-04-05Merge tag 'kbuild-v6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Improve performance in gendwarfksyms - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS - Support CONFIG_HEADERS_INSTALL for ARCH=um - Use more relative paths to sources files for better reproducibility - Support the loong64 Debian architecture - Add Kbuild bash completion - Introduce intermediate vmlinux.unstripped for architectures that need static relocations to be stripped from the final vmlinux - Fix versioning in Debian packages for -rc releases - Treat missing MODULE_DESCRIPTION() as an error - Convert Nios2 Makefiles to use the generic rule for built-in DTB - Add debuginfo support to the RPM package * tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: rpm-pkg: build a debuginfo RPM kconfig: merge_config: use an empty file as initfile nios2: migrate to the generic rule for built-in DTB rust: kbuild: skip `--remap-path-prefix` for `rustdoc` kbuild: pacman-pkg: hardcode module installation path kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally modpost: require a MODULE_DESCRIPTION() kbuild: make all file references relative to source root x86: drop unnecessary prefix map configuration kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS kbuild: Add a help message for "headers" kbuild: deb-pkg: remove "version" variable in mkdebian kbuild: deb-pkg: fix versioning for -rc releases Documentation/kbuild: Fix indentation in modules.rst example x86: Get rid of Makefile.postlink kbuild: Create intermediate vmlinux build with relocations preserved kbuild: Introduce Kconfig symbol for linking vmlinux with relocations kbuild: link-vmlinux.sh: Make output file name configurable kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y Revert "kheaders: Ignore silly-rename files" ...
2025-04-05Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, mostly from the end of last week, this week was very quiet, maybe you scared everyone away. It's mostly amdgpu, and xe, with some i915, adp and bridge bits, since I think this is overly quiet I'd expect rc2 to be a bit more lively. bridge: - tda998x: Select CONFIG_DRM_KMS_HELPER amdgpu: - Guard against potential division by 0 in fan code - Zero RPM support for SMU 14.0.2 - Properly handle SI and CIK support being disabled - PSR fixes - DML2 fixes - DP Link training fix - Vblank fixes - RAS fixes - Partitioning fix - SDMA fix - SMU 13.0.x fixes - Rom fetching fix - MES fixes - Queue reset fix xe: - Fix NULL pointer dereference on error path - Add missing HW workaround for BMG - Fix survivability mode not triggering - Fix build warning when DRM_FBDEV_EMULATION is not set i915: - Bounds check for scalers in DSC prefill latency computation - Fix build by adding a missing include adp: - Fix error handling in plane setup" # -----BEGIN PGP SIGNATURE----- * tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits) drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER drm/amdgpu/gfx12: fix num_mec drm/amdgpu/gfx11: fix num_mec drm/amd/pm: Add gpu_metrics_v1_8 drm/amdgpu: Prefer shadow rom when available drm/amd/pm: Update smu metrics table for smu_v13_0_6 drm/amd/pm: Remove host limit metrics support Remove unnecessary firmware version check for gc v9_4_2 drm/amdgpu: stop unmapping MQD for kernel queues v3 Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA" drm/amdgpu: Parse all deferred errors with UMC aca handle drm/amdgpu: Update ta ras block drm/amdgpu: Add NPS2 to DPX compatible mode drm/amdgpu: Use correct gfx deferred error count drm/amd/display: Actually do immediate vblank disable drm/amd/display: prevent hang on link training fail Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting" drm/amd/display: Increase vblank offdelay for PSR panels drm/amd: Handle being compiled without SI or CIK support better drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2 ...
2025-04-06kbuild: rpm-pkg: build a debuginfo RPMUday Shankar
The rpm-pkg make target currently suffers from a few issues related to debuginfo: 1. debuginfo for things built into the kernel (vmlinux) is not available in any RPM produced by make rpm-pkg. This makes using tools like systemtap against a make rpm-pkg kernel impossible. 2. debug source for the kernel is not available. This means that commands like 'disas /s' in gdb, which display source intermixed with assembly, can only print file names/line numbers which then must be painstakingly resolved to actual source in a separate editor. 3. debuginfo for modules is available, but it remains bundled with the .ko files that contain module code, in the main kernel RPM. This is a waste of space for users who do not need to debug the kernel (i.e. most users). Address all of these issues by additionally building a debuginfo RPM when the kernel configuration allows for it, in line with standard patterns followed by RPM distributors. With these changes: 1. systemtap now works (when these changes are backported to 6.11, since systemtap lags a bit behind in compatibility), as verified by the following simple test script: # stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }' dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0 ... 2. disas /s works correctly in gdb, with source and disassembly interspersed: # gdb vmlinux --batch -ex 'disas /s blk_op_str' Dump of assembler code for function blk_op_str: block/blk-core.c: 125 { 0xffffffff814c8740 <+0>: endbr64 127 128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op]) 0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax 0xffffffff814c874b <+11>: cmp $0x23,%edi 0xffffffff814c874e <+14>: ja 0xffffffff814c8768 <blk_op_str+40> 0xffffffff814c8750 <+16>: mov %edi,%edi 126 const char *op_str = "UNKNOWN"; 0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx 127 128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op]) 0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax 126 const char *op_str = "UNKNOWN"; 0xffffffff814c8761 <+33>: test %rax,%rax 0xffffffff814c8764 <+36>: cmove %rdx,%rax 129 op_str = blk_op_name[op]; 130 131 return op_str; 132 } 0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk> End of assembler dump. 3. The size of the main kernel package goes down substantially, especially if many modules are built (quite typical). Here is a comparison of installed size of the kernel package (configured with allmodconfig, dwarf4 debuginfo, and module compression turned off) before and after this patch: # rpm -qi kernel-6.13* | grep -E '^(Version|Size)' Version : 6.13.0postpatch+ Size : 1382874089 Version : 6.13.0prepatch+ Size : 17870795887 This is a ~92% size reduction. Note that a debuginfo package can only be produced if the following configs are set: - CONFIG_DEBUG_INFO=y - CONFIG_MODULE_COMPRESS=n - CONFIG_DEBUG_INFO_SPLIT=n The first of these is obvious - we can't produce debuginfo if the build does not generate it. The second two requirements can in principle be removed, but doing so is difficult with the current approach, which uses a generic rpmbuild script find-debuginfo.sh that processes all packaged executables. If we want to remove those requirements the best path forward is likely to add some debuginfo extraction/installation logic to the modules_install target (controllable by flags). That way, it's easier to operate on modules before they're compressed, and the logic can be reused by all packaging targets. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-04-06kconfig: merge_config: use an empty file as initfileDaniel Gomez
The scripts/kconfig/merge_config.sh script requires an existing $INITFILE (or the $1 argument) as a base file for merging Kconfig fragments. However, an empty $INITFILE can serve as an initial starting point, later referenced by the KCONFIG_ALLCONFIG Makefile variable if -m is not used. This variable can point to any configuration file containing preset config symbols (the merged output) as stated in Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will contain just the merge output requiring the user to run make (i.e. KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make olddefconfig). Instead of failing when `$INITFILE` is missing, create an empty file and use it as the starting point for merges. Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-10 21:29:17 +0000