| Age | Commit message (Collapse) | Author |
|---|
|
[Why/How]
Move the wait for pending updates past prepare_bandwidth if the previous
update was not a full update to reduce the average time it takes to
complete a full update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An upstream bug report suggests that there are production dGPUs that are
older than DCN401 but still have a umc_info in VBIOS tables with the
same version as expected for a DCN401 product. Hence, reading this
tables should be guarded with a version check.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why&how]
Adjust otg w/a disable condition to include HPO explicitly rather than
assuming it is implicitly used through DP2.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why&how]
Applying a hw w/a only relevant to DIG FIFO causing corruption
using HPO, do not apply the w/a if on DP2/HPO
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Move from pointer to callback to reference callback directly
Missed renaming fixpt functions with spl prefix
Reviewed-by: Navid Assadian <Navid.Assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During boot up and resume the DC layer will reset the panel
brightness to fix a flicker issue.
It will cause the dm->actual_brightness is not the current panel
brightness level. (the dm->brightness is the correct panel level)
[How]
Set the backlight level after do the set mode.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: d9e865826c20 ("drm/amd/display: Simplify brightness initialization")
Reported-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During mode validation, there maybe modes that fail
max_downscale_src_width check and scaling_quality
taps are 0. This will cause an assert to trigger
in spl_set_filters_data() because taps are 0.
[How]
Move taps calculation for non-adaptive scaling mode
to separate function and call it
if max_downscale_src_width fails. This will
populate taps if scaling_quality taps are 0.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
SEC_CNTL isn't readable by x86 and can block Z8 entry if read.
[How]
Remove the read.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Code reading rxstatus message size was incorrectly assigning it to
uint8_t, despite the value being 10 bits long (lower byte plus lowest
2 bits from upper byte). This caused the highest 2 bits to be ignored,
potentially missing invalid values.
[How]
Change all local variables holding rxstatus message size from uint8_t
to uint16_t, as in mod_hdcp_message_hdcp2::rx_id_list_size.
Replaced untyped HDCP_2_2_HMID_RXSTATUS_MSG_SZ_HI macro with function
hdcp_2_2_hmid_rxstatus_msg_sz(const uint8_t[2]) to encapsulate entire
calculation and return a typed result.
Removed spaces mixed with tabs to fix indentation on modified lines.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4f01a68751194d05280d659a65758c09e4af04d6.
[why & how]
The offending commit caused a lighting issue for Samsung Odyssey G9
monitors when connecting via USB-C. The commit was intended to block certain UHBR rates.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
insert divided by zero protection
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use string choice helpers for better readability.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202410161814.I6p2Nnux-lkp@intel.com/
Signed-off-by: R Sundar <prosunofficial@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since 040fdcde288a ("drm/amdgpu: respect the abmlevel module parameter value
if it is set"), the default value for amdgpu.abmlevel was set to -1, or auto.
However, the comment explaining the default value was not updated to reflect
the change (-1, or auto; not -1, or disabled).
Clarify that the default value (-1) means auto.
Fixes: 040fdcde288a ("drm/amdgpu: respect the abmlevel module parameter value if it is set")
Reported-by: Ruikai Liu <rickliu2000@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the past these specialized on chip memory pools were reported as system
memory (aka 'cpu') which was not correct and misleading. That has since
been removed so lets make them visible as their own respective memory
regions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Yunxiang Li <Yunxiang.Li@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So far these specialized on chip memory pools were reported as system
memory (aka 'cpu') which is not correct and misleading. Lets remove that
and consider later making them visible as their own thing.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Yunxiang Li <Yunxiang.Li@amd.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since on modern systems all of vram can be made visible anyways, to
simplify the new implementation, drops tracking how much memory is
visible for now. If this is really needed we can add it back on top of
the new implementation, or just report all the BOs as visible.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The old behavior reports the resident memory usage for this key and the
documentation say so as well. However this was accidentally changed to
include buffers that was evicted.
Fixes: 04bdba46542c ("drm/amdgpu: Use drm_print_memory_stats helper from fdinfo")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix two issues with memory allocation in amdgpu_discovery_get_nps_info()
for mem_ranges:
- Add a check for allocation failure to avoid dereferencing a null
pointer.
- As suggested by Christophe, use kvcalloc() for memory allocation,
which checks for multiplication overflow.
Additionally, assign the output parameters nps_type and range_cnt after
the kvcalloc() call to prevent modifying the output parameters in case
of an error return.
Fixes: b194d21b9bcc ("drm/amdgpu: Use NPS ranges from discovery table")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add messages to make it clear when a per ring reset
happens. This is helpful for debugging and aligns with
other reset methods.
v2: add ring name in success/fail messages (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make sure KFD gets a turn when serializing access to
the GC IP. Currently non-KFD jobs can starve KFD if they
submit often enough. This patch prevents that by stalling
non-KFD if its time period has elapsed.
v2: fix units
v3: check enablement properly
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit c2c2ce1e9623 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d3448 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
calculate_user_regamma_coeff() and calculate_user_regamma_ramp() were
added in 2018 in commit
55a01d4023ce ("drm/amd/display: Add user_regamma to color module")
but never used.
Remove them and their helpers.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an interface to query whether KFD has any active queues.
v2: fix build issues
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some members of the drm_crtc structure have been deprecated in favor of
equivalent members in the drm_crtc_state structure. As reported by Ville
Syrjala [1], the VKMS driver was still using these deprecated fields. This
commit updates the VKMS driver to use the new drm_crtc_state fields
instead.
Additionally, this commit removes the call to
`drm_calc_timestamping_constants` in `vkms_enable_vblank` as it is
redundant. This calculation is already performed in
`vkms_atomic_commit_tail` by calling
`drm_atomic_helper_commit_modeset_disables`.
[1]:https://lore.kernel.org/all/20241002182200.15363-1-ville.syrjala@linux.intel.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003-remove-legacy-v1-1-0b7db1f1a1a6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Didn't notice drm/drm-next had the build fix for drm_bridge, so ended up
committing the same patch. Sync with drm and pretend it didn't happen?
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
Introduce the scoped variant of the loop to automatically release the
child node when it goes out of scope, which is more robust than the
non-scoped variant, and accounts for new early exits that could be added
in the future.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241011-mtk_drm_drv_memleak-v1-2-2b40c74c8d75@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Early exits (goto, break, return) from for_each_child_of_node() required
an explicit call to of_node_put(), which was not introduced with the
break if cnt == MAX_CRTC.
Add the missing of_node_put() before the break.
Cc: stable@vger.kernel.org
Fixes: d761b9450e31 ("drm/mediatek: Add cnt checking for coverity issue")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241011-mtk_drm_drv_memleak-v1-1-2b40c74c8d75@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add drm_panic support for nv50+ cards.
It's enough to get the panic screen while running Gnome/Wayland with
an nv50+ nvidia GPU.
It doesn't support multi-plane or compressed format yet.
Tiling is tested on GTX1650 (Turing), GeForce GT 1030 (Pascal) and
Geforce 8800 GTS (Tesla).
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022185553.1103384-4-jfalempe@redhat.com
|
|
Refactor, and move the tiling geometry functions to dispnv50/tile.h,
so they can be re-used by drm_panic.
No functional impact.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022185553.1103384-3-jfalempe@redhat.com
|
|
Add support for ABGR2101010, used by the nouveau driver.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022185553.1103384-2-jfalempe@redhat.com
|
|
CRTC creation uses drmm_crtc_init_with_planes(), which automatically
handles cleanup. However, an unnecessary call to drm_crtc_cleanup() is
still present in the vkms_output_init() error path.
Fixes: 99cc528ebe92 ("drm/vkms: Use drmm_crtc_init_with_planes()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031183835.3633-1-jose.exposito89@gmail.com
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Changes in Dynamic Range and Mastering infoframe
should not trigger a full modeset. Therefore, allow
fastset. DP SDP programming is already hooked up in the
fastset flow but HDMI AVI infoframe update is not, add it.
Any other infoframe that can be fastset should be added to
the helper intel_hdmi_fastset_infoframes().
v3:
- Create a wrapper intel_ddi_update_pipe_hdmi to stick to
uniform naming (Jani)
- Do not disable HDMI AVI infoframe if already disabled (Uma)
v2:
- Update HDMI AVI infoframe during fastset.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023044122.3889137-1-chaitanya.kumar.borah@intel.com
|
|
We are currently seeing unexpected link trainings with several different
eDP panels. These are caused by these panels stating bad link status in
their dpcd registers. This can be observed by doing following test:
1. Boot up without Xe module loaded
2. Load Xe module with PSR disabled:
$ modprobe xe enable_psr=0
3. Read panel link status register
$ dpcd_reg read --offset 0x200e --count=1
0x200e: 00
4. Enable PSR, sleep for 2 seconds and disable PSR again:
$ echo 0x1 > /sys/kernel/debug/dri/0/i915_edp_psr_debug
$ echo "-1" > /sys/kernel/debug/dri/0000:00:02.0/xe_params/enable_psr
$ echo 0x0 > /sys/kernel/debug/dri/0/i915_edp_psr_debug
$ sleep 2
$ cat /sys/kernel/debug/dri/0/i915_edp_psr_status | grep status
$ echo 0x1 > /sys/kernel/debug/dri/0/i915_edp_psr_debug
Source PSR/PanelReplay status: DEEP_SLEEP [0x80310030]
5. Now read panel link status registers again:
$ dpcd_reg read --offset 0x200e --count=1
0x200e: 80
Workaround this by not trusting link status registers after PSR is enabled
until first short pulse interrupt is received.
v2:
- clear link_ok flag on pipe disable
- remove useless comment
- modify intel_dp_needs_link_retrain return statement
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029122415.1789528-1-jouni.hogander@intel.com
|
|
Currently, even though there is a bit to control FEC enable/disable
individually, the FEC Decode Enable sequence is sent by the SOC only
once TRANS_CONF enable is set. This ties the FEC enabling too tightly
to modeset and therefore cannot be re-issued (in case of failure)
without a modeset.
From PTL, FEC_DECODE_EN sequence can be sent to a DPRX independent
of TRANS_CONF enable. This allows us to re-issue an FEC_DECODE_EN
sequence without a modeset. Hence allowing us to have a retry
mechanism in case the DPRX does not respond with an FEC_ENABLE
within certain amount of time.
While at it, replace struct drm_i915_private with struct intel_display
v4:
- More code refactor [Jani]
- use struct intel_display [Jani]
- Optimize logging [Jani]
v3:
- Make the commit message more legible [Jani]
- Refactor code to re-use existing code [Jani]
- Do away with platform dependent FEC enable checks [Jani]
v2:
- Refactor code to avoid duplication and improve readability [Jani]
- In case of PTL, wait for FEC status directly after FEC enable [Srikanth]
- Wait for FEC_ENABLE_LIVE_STATUS to be cleared before
re-enabling FEC [Srikanth]
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024061002.4085137-1-chaitanya.kumar.borah@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge Linus tree for some drm-fixes needed for msm and xe merges.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add support for Exynos 7870 DECON in the Exynos 7 DECON driver.
Some Exynos 7 series SoCs (Exynos 7580 onwards) have different
register values. In order to address such changes, include a driver
data struct (named decon_data) so that correct base addresses and
shift values can be provided.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The DECON channels are not cleared properly as the windows aren't
shadow protected. When accompanied with an IOMMU, it pagefaults, and
the kernel panics.
Implement shadow protect/unprotect, along with a standalone update,
for channel clearing to properly take effect.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The clkdiv values are incorrect as ideal_clk is in kHz and the clock
rate of vclk is in Hz. Multiply 1000 to ideal_clk to bring it to Hz.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Modify the functions to accept a pointer to struct decon_context
instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
exynos_drm_crtc_wait_pending_update, exynos_drm_crtc_finish_update
are not used anymore.
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Replace 'initailization' with 'initialization' in the comment.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for null deref on suspend, bogus supplies
fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
* tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: Add error pointer check in xusb.c
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
phy: ti: phy-j721e-wiz: fix usxgmii configuration
phy: starfive: jh7110-usb: Fix link configuration to controller
phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
phy: qcom: qmp-combo: move driver data initialisation earlier
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
phy: usb: disable COMMONONN for dual mode
phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control register
phy: usb: Fix missing elements in BCM4908 USB init array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
|
