summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-28net: hns3: handle empty unknown interruptHuazhong Tan
Since some MSI-X interrupt's status may be cleared by hardware, so when the driver receives the interrupt, reading HCLGE_VECTOR0_PF_OTHER_INT_STS_REG register will get an empty unknown interrupt. For this case, the irq handler should enable vector0 interrupt. This patch also use dev_info() instead of dev_dbg() in the hclge_check_event_cause(), since this information will be useful for normal usage. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: re-schedule reset task while VF reset failHuazhong Tan
The VF reset may fail for some probabilistic reasons, such as wait for hardware reset timeout, wait for mailbox response timeout, so this patch tries to re-schedule the reset task when the number of reset failing is under HCLGEVF_RESET_MAX_FAIL_CNT. This patch also add a function hclgevf_reset_err_handle() to handle the reset failing. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: add Asym Pause support to fix autoneg problemYonglong Liu
Local device and link partner config auto-negotiation on both, local device config pause frame use as: rx on/tx off, link partner config pause frame use as: rx off/tx on. We except the result is: Local device: Autonegotiate: on RX: on TX: off RX negotiated: on TX negotiated: off Link partner: Autonegotiate: on RX: off TX: on RX negotiated: off TX negotiated: on But actually, the result of Local device and link partner is both: Autonegotiate: on RX: off TX: off RX negotiated: off TX negotiated: off The root cause is that the supported flag is has only Pause, reference to the function genphy_config_advert(): static int genphy_config_advert(struct phy_device *phydev) { ... linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); ... } The pause frame use of link partner is rx off/tx on, so its advertising only set the bit Asym_Pause, and the supported is only set the bit Pause, so the result of linkmode_and(), is rx off/tx off. This patch adds Asym_Pause to the supported flag to fix it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: fix a -Wformat-nonliteral compile warningYonglong Liu
When setting -Wformat=2, there is a compiler warning like this: hclge_main.c:xxx:x: warning: format not a string literal and no format arguments [-Wformat-nonliteral] strs[i].desc); ^~~~ This patch adds missing format parameter "%s" to snprintf() to fix it. Fixes: 46a3df9f9718 ("Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: add some error checking in hclge_tm moduleYunsheng Lin
When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg with vport->vport_id as pri_id, which is used as index for hdev->tm_info.tc_info, it will cause out of bound access issue if vport_id is equal to or larger than HNAE3_MAX_TC. Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE. So this patch adds two checks for above cases. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: change SSU's buffer allocation according to UMYunsheng Lin
Currently when there is share buffer in the SSU(storage switching unit), the low waterline for RX private buffer is too low to keep the hardware running. Hardware may have processed all the packet stored in the private buffer of the low waterline before the new packet comes, because hardware only tell the peer send packet again when the private buffer is under the low waterline. So this patch only allocate RX private buffer if there is enough buffer according to hardware user manual. This patch also reserve some buffer for reusing when TC num is less than or equal to 2, and change PAUSE_TRANS_GAP & HCLGE_NON_DCB_ADDITIONAL_BUF according to hardware user manual. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: enable DCB when TC num is one and pfc_en is non-zeroYunsheng Lin
Currently when TC num is one, the DCB will be disabled no matter if pfc_en is non-zero or not. This patch enables the DCB if pfc_en is non-zero, even when TC num is one. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: fix __QUEUE_STATE_STACK_XOFF not cleared issueHuazhong Tan
When change MTU or other operations, which just calling .reset_notify to do HNAE3_DOWN_CLIENT and HNAE3_UP_CLIENT, then the netdev_tx_reset_queue() in the hns3_clear_all_ring() will be ignored. So the dev_watchdog() may misdiagnose a TX timeout. This patch separates netdev_tx_reset_queue() from hns3_clear_all_ring(), and unifies hns3_clear_all_ring() and hns3_force_clear_all_ring into one, since they are doing similar things. Fixes: 3a30964a2eef ("net: hns3: delay ring buffer clearing during reset") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge branch 'Better-PHYLINK-compliance-for-SJA1105-DSA'David S. Miller
Vladimir Oltean says: ==================== Better PHYLINK compliance for SJA1105 DSA After discussing with Russell King, it appears this driver is making a few confusions and not performing some checks for consistent operation. Changes in v2: - Removed redundant print in the phylink_validate callback (in 2/3). ==================== Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: dsa: sja1105: Mark in-band AN modes not supported for PHYLINKVladimir Oltean
We need a better way to signal this, perhaps in phylink_validate, but for now just print this error message as guidance for other people looking at this driver's code while trying to rework PHYLINK. Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: dsa: sja1105: Check for PHY mode mismatches with what PHYLINK reportsVladimir Oltean
PHYLINK being designed with PHYs in mind that can change MII protocol, for correct operation it is necessary to ensure that the PHY interface mode stays the same (otherwise clear the supported bit mask, as required). Because this is just a hypothetical situation for now, we don't bother to check whether we could actually support the new PHY interface mode. Actually we could modify the xMII table, reset the switch and send an updated static configuration, but adding that would just be dead code. Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: dsa: sja1105: Don't check state->link in phylink_mac_configVladimir Oltean
It has been pointed out that PHYLINK can call mac_config only to update the phy_interface_type and without knowing what the AN results are. Experimentally, when this was observed to happen, state->link was also unset, and therefore was used as a proxy to ignore this call. However it is also suggested that state->link is undefined for this callback and should not be relied upon. So let the previously-dead codepath for SPEED_UNKNOWN be called, and update the comment to make sure the MAC's behavior is sane. Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28hinic: reduce rss_init stack usageArnd Bergmann
On 32-bit architectures, putting an array of 256 u32 values on the stack uses more space than the warning limit: drivers/net/ethernet/huawei/hinic/hinic_main.c: In function 'hinic_rss_init': drivers/net/ethernet/huawei/hinic/hinic_main.c:286:1: error: the frame size of 1068 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] I considered changing the code to use u8 values here, since that's all the hardware supports, but dynamically allocating the array is a more isolated fix here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge branch 'stmmac-10GbE-using-XGMAC'David S. Miller
Jose Abreu says: ==================== net: stmmac: 10GbE using XGMAC Support for 10Gb Link using XGMAC core plus some performance tweaks. Tested in a PCI based setup. iperf3 TCP results: TSO ON, MTU=1500, TX Queues = 1, RX Queues = 1, Flow Control ON Pinned CPU (-A), Zero-Copy (-Z) [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-600.00 sec 643 GBytes 9.21 Gbits/sec 1 sender [ 5] 0.00-600.00 sec 643 GBytes 9.21 Gbits/sec receiver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Update Kconfig entryJose Abreu
We support more speeds now. Update the Kconfig entry. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Only disable interrupts if NAPI is scheduledJose Abreu
Only disable the interrupts if RX NAPI gets to be scheduled. Also, schedule the TX NAPI only when the interrupts are disabled. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Update RX Tail Pointer to last free entryJose Abreu
Update the RX Tail Pointer to the last available SKB entry. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Enable support for > 32 Bits addressing in XGMACJose Abreu
Currently, stmmac only supports 32 bits addressing for SKB. Enable the support for upto 48 bits addressing in XGMAC core. This avoids the use of bounce buffers and increases performance. Changes from v1: - Fallback to 32 bits in failure (Andrew) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Do not disable interrupts when cleaning TXJose Abreu
This is a performance killer and anyways the interrupts are being disabled by RX NAPI so no need to disable them again. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Add the missing speeds that XGMAC supportsJose Abreu
XGMAC supports following speeds: - 10G XGMII - 5G XGMII - 2.5G XGMII - 2.5G GMII - 1G GMII - 100M MII - 10M MII Add them to the stmmac driver. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: dwxgmac: Fix the undefined burst settingJose Abreu
Undefined burst shall only be set if pdata asks to. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Decrease default RX Watchdog valueJose Abreu
For performance reasons decrease the default RX Watchdog value for the minimum allowed. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Do not try to enable PHY EEE if MAC does not support itJose Abreu
Do not enable EEE feature in the PHY if MAC does not support it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: dwxgmac: Enable EDMA by defaultJose Abreu
Enable the EDMA feature by default which gives higher performance. Changes from v1: - Do not use magic values (David) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Fix case when PHY handle is not presentJose Abreu
Some DT bindings do not have the PHY handle. Let's fallback to manually discovery in case phylink_of_phy_connect() fails. Changes from v1: - Fixup comment style (Sergei) Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge tag 'wireless-drivers-for-davem-2019-06-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.2 Hopefully the last set of fixes for 5.2. Nothing special this around, only small fixes and support for new cards. iwlwifi * add new cards for 22000 series and smaller fixes wl18xx * fix a clang warning about unused variables mwifiex * properly handle small vendor IEs (a regression from the recent security fix) ath * fix few SPDX tags mt76 * fix A-MSDU aggregation which got broken in v5.2-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28NFS/flexfiles: Use the correct TCP timeout for flexfiles I/OTrond Myklebust
Fix a typo where we're confusing the default TCP retrans value (NFS_DEF_TCP_RETRANS) for the default TCP timeout value. Fixes: 15d03055cf39f ("pNFS/flexfiles: Set reasonable default ...") Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-28SUNRPC: Fix up calculation of client message lengthTrond Myklebust
In the case where a record marker was used, xs_sendpages() needs to return the length of the payload + record marker so that we operate correctly in the case of a partial transmission. When the callers check return value, they therefore need to take into account the record marker length. Fixes: 06b5fc3ad94e ("Merge tag 'nfs-rdma-for-5.1-1'...") Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-06-28doc: RCU callback locks need only _bh, not necessarily _irqJiunn Chang
The UP.rst file calls for locks acquired within RCU callback functions to use _irq variants (spin_lock_irqsave() or similar), which does work, but can be overkill. This commit therefore instead calls for _bh variants (spin_lock_bh() or similar), while noting that _irq does work. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Jiunn Chang <c0d1n61at3@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-28docs: format kernel-parameters -- as codeStephen Kitt
The current ReStructuredText formatting results in "--", used to indicate the end of the kernel command-line parameters, appearing as an en-dash instead of two hyphens; this patch formats them as code, "``--``", as done elsewhere in the documentation. Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-28Doc : doc-guide : Fix a typoSheriff Esseson
fix the disjunction by replacing "of" with "or". Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-28Merge branch 'automarkup' into docs-nextJonathan Corbet
Bring in (finally) automatic markup of function() so we need not load up our docs with ugly c:func: annotations.
2019-06-28platform: x86: get rid of a non-existent documentMauro Carvalho Chehab
Changeset 163ede97a9a2 ("Documentation: platform: Delete x86-laptop-drivers.txt") removed the x86-laptop-drivers.txt file, but forgot to update its Kconfig. Fixes: 163ede97a9a2 ("Documentation: platform: Delete x86-laptop-drivers.txt") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-28ASoC: rt1308: Add RT1308 amplifier driverDerek Fang
This is the initial amplifier driver for rt1308. Signed-off-by: Derek Fang <derek.fang@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28spi: stm32-qspi: remove signal sensitive on completionLudovic Barre
On umount step a sigkill signal is set (without user specific action), due to sigkill signal the completion will be interrupted and the data transfer can't be finished if a sync is needed. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28dt-bindings: spi: stm32-qspi: add dma propertiesLudovic Barre
This patch adds description of dma properties (optional). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: soc-utils: respawn dummy PlatformKuninori Morimoto
commit 64ee5067cf64 ("ASoC: soc-utils: remove dummy Platform") removed dummy Platform from ALSA SoC, but it is over-kill. This patch respawn it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: rockchip: rk3399_gru_sound: consider CPU-Platform possibilityKuninori Morimoto
commit 961fb3c206dc ("ASoC: rockchip: rk3399_gru_sound: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 961fb3c206dc ("ASoC: rockchip: rk3399_gru_sound: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: qcom: consider CPU-Platform possibilityKuninori Morimoto
commit 0814c6412967 ("ASoC: qcom: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 0814c6412967 ("ASoC: qcom: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: simple-card-utils: consider CPU-Platform possibilityKuninori Morimoto
commit 6f0437445735 ("ASoC: simple-card-utils: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 6f0437445735 ("ASoC: simple-card-utils: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ux500: mop500: consider CPU-Platform possibilityKuninori Morimoto
commit 9ae6cdb184b6 ("ASoC: ux500: mop500: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 9ae6cdb184b6 ("ASoC: ux500: mop500: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ti: rx51: consider CPU-Platform possibilityKuninori Morimoto
commit f0edc6c1ee48 ("ASoC: ti: rx51: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit f0edc6c1ee48 ("ASoC: ti: rx51: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ti: omap-twl4030: consider CPU-Platform possibilityKuninori Morimoto
commit bfe1273c65e1 ("ASoC: ti: omap-twl4030: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit bfe1273c65e1 ("ASoC: ti: omap-twl4030: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ti: omap-hdmi: consider CPU-Platform possibilityKuninori Morimoto
commit edba13aeae88 ("ASoC: ti: omap-hdmi: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit edba13aeae88 ("ASoC: ti: omap-hdmi: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ti: omap-abe-twl6040: consider CPU-Platform possibilityKuninori Morimoto
commit 1306ab2eddd1 ("ASoC: ti: omap-abe-twl6040: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 1306ab2eddd1 ("ASoC: ti: omap-abe-twl6040: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: ti: davinci-evm: consider CPU-Platform possibilityKuninori Morimoto
commit f46da1b9046e ("ASoC: ti: davinci-evm: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit f46da1b9046e ("ASoC: ti: davinci-evm: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: tegra: trimslice: consider CPU-Platform possibilityKuninori Morimoto
commit 567b374d9973 ("ASoC: tegra: trimslice: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 567b374d9973 ("ASoC: tegra: trimslice: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: tegra: tegra_wm9712: consider CPU-Platform possibilityKuninori Morimoto
commit 5d62677238e9 ("ASoC: tegra: tegra_wm9712: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 5d62677238e9 ("ASoC: tegra: tegra_wm9712: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: tegra: tegra_wm8903: consider CPU-Platform possibilityKuninori Morimoto
commit b28d98527157 ("ASoC: tegra: tegra_wm8903: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit b28d98527157 ("ASoC: tegra: tegra_wm8903: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28ASoC: tegra: tegra_wm8753: consider CPU-Platform possibilityKuninori Morimoto
commit 404b229b84af ("ASoC: tegra: tegra_wm8753: don't select unnecessary Platform") Current ALSA SoC avoid to add duplicate component to rtd, and this driver was selecting CPU component as Platform component. Thus, above patch removed Platform settings from this driver, because it assumed these are same component. But, some CPU driver is using generic DMAEngine, in such case, both CPU component and Platform component will have same of_node/name. In other words, there are some components which are different but have same of_node/name. In such case, Card driver definitely need to select Platform even though it is same as CPU. It is depends on CPU driver, but is difficult to know it from Card driver. This patch reverts above patch. Fixes: commit 404b229b84af ("ASoC: tegra: tegra_wm8753: don't select unnecessary Platform") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 03:09:01 +0000