summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse bugfixes from Miklos Szeredi: "These are bugfixes and a cleanup to the "readdirplus" feature" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: readdirplus: cleanup fuse: readdirplus: change attributes once fuse: readdirplus: fix instantiate fuse: readdirplus: sanity checks fuse: readdirplus: fix dentry leak
2013-07-23staging: comedi: fix a race between do_cmd_ioctl() and read/writeIan Abbott
`do_cmd_ioctl()` is called with the comedi device's mutex locked to process the `COMEDI_CMD` ioctl to set up comedi's asynchronous command handling on a comedi subdevice. `comedi_read()` and `comedi_write()` are the `read` and `write` handlers for the comedi device, but do not lock the mutex (for performance reasons, as some things can hold the mutex for quite a long time). There is a race condition if `comedi_read()` or `comedi_write()` is running at the same time and for the same file object and comedi subdevice as `do_cmd_ioctl()`. `do_cmd_ioctl()` sets the subdevice's `busy` pointer to the file object way before it sets the `SRF_RUNNING` flag in the subdevice's `runflags` member. `comedi_read() and `comedi_write()` check the subdevice's `busy` pointer is pointing to the current file object, then if the `SRF_RUNNING` flag is not set, will call `do_become_nonbusy()` to shut down the asyncronous command. Bad things can happen if the asynchronous command is being shutdown and set up at the same time. To prevent the race, don't set the `busy` pointer until after the `SRF_RUNNING` flag has been set. Also, make sure the mutex is held in `comedi_read()` and `comedi_write()` while calling `do_become_nonbusy()` in order to avoid moving the race condition to a point within that function. Change some error handling `goto cleanup` statements in `do_cmd_ioctl()` to simple `return -ERRFOO` statements as a result of changing when the `busy` pointer is set. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23staging: comedi: COMEDI_CANCEL ioctl should wake up read/writeIan Abbott
Comedi devices can do blocking read() or write() (or poll()) if an asynchronous command has been set up, blocking for data (for read()) or buffer space (for write()). Various events associated with the asynchronous command will wake up the blocked reader or writer (or poller). It is also possible to force the asynchronous command to terminate by issuing a `COMEDI_CANCEL` ioctl. That shuts down the asynchronous command, but does not currently wake up the blocked reader or writer (or poller). If the blocked task could be woken up, it would see that the command is no longer active and return. The caller of the `COMEDI_CANCEL` ioctl could attempt to wake up the blocked task by sending a signal, but that's a nasty workaround. Change `do_cancel_ioctl()` to wake up the wait queue after it returns from `do_cancel()`. `do_cancel()` can propagate an error return value from the low-level comedi driver's cancel routine, but it always shuts the command down regardless, so `do_cancel_ioctl()` can wake up he wait queue regardless of the return value from `do_cancel()`. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23NFSv4: Fix brainfart in attribute length calculationTrond Myklebust
The calculation of the attribute length was 4 bytes off. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Andre Heider <a.heider@gmail.com> Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-23ARM: multi_v7_defconfig: Select USB chipidea driverFabio Estevam
CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23ARM: pxa: propagate errors from regulator_enable() to pxamciArnd Bergmann
The em_x270_mci_setpower() and em_x270_usb_hub_init() functions call regulator_enable(), which may return an error that must be checked. This changes the em_x270_usb_hub_init() function to bail out if it fails, and changes the pxamci_platform_data->setpower callback so that the a failed em_x270_mci_setpower call can be propagated by the pxamci driver into the mmc core. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Chris Ball <cjb@laptop.org> [olof: fixed order of regulator_enable() and test in em_x270_usb_hub_init] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23Merge remote-tracking branch 'asoc/fix/tegra' into asoc-linusMark Brown
2013-07-23Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linusMark Brown
2013-07-23Merge remote-tracking branch 'asoc/fix/max98088' into asoc-linusMark Brown
2013-07-23Merge remote-tracking branch 'asoc/fix/ep93xx' into asoc-linusMark Brown
2013-07-23Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown
2013-07-23Merge remote-tracking branch 'asoc/fix/atmel' into asoc-linusMark Brown
2013-07-23ARM: zynq: fix compilation warningVincent Stehlé
Fix the following compilation warning: arch/arm/mach-zynq/common.c:110:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-zynq/common.c:110:2: warning: (near initialization for ‘__mach_desc_XILINX_EP107.restart’) [enabled by default] Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Robin Holt <holt@sgi.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: trivial@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23ARM: keystone: fix compilation warningVincent Stehlé
Fix the following compilation warning: arch/arm/mach-keystone/keystone.c:74:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-keystone/keystone.c:74:2: warning: (near initialization for ‘__mach_desc_KEYSTONE.restart’) [enabled by default] Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: trivial@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23USB: option: add D-Link DWM-152/C1 and DWM-156/C1Alexandr \"Sky\" Ivanov
Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices. DWM-152/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e01 Rev= 0.00 S: Product=USB Configuration S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms DWM-156/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e02 Rev= 0.00 S: Product=DataCard Device S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23nfsd: nfsd_open: when dentry_open returns an error do not propagate as ↵Harshula Jayasuriya
struct file The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Cc: stable@vger.kernel.org Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-07-23[SCSI] sd: fix crash when UA received on DIF enabled deviceEwan D. Milne
sd_prep_fn will allocate a larger CDB for the command via mempool_alloc for devices using DIF type 2 protection. This CDB was being freed in sd_done, which results in a kernel crash if the command is retried due to a UNIT ATTENTION. This change moves the code to free the larger CDB into sd_unprep_fn instead, which is invoked after the request is complete. It is no longer necessary to call scsi_print_command separately for this case as the ->cmnd will no longer be NULL in the normal code path. Also removed conditional test for DIF type 2 when freeing the larger CDB because the protection_type could have been changed via sysfs while the command was executing. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23ahci: fix Null pointer dereference in achi_host_active()Xiaotian Feng
commit b29900e6 (AHCI: Make distinct names for ports in /proc/interrupts) introuded a regression, which resulted Null pointer dereference for achi host with dummy ports. For ahci ports, when the port is dummy port, its private_data will be NULL, as ata_dummy_port_ops doesn't support ->port_start. changes in v2: use pp to check dummy ports, update comments Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2013-07-23[SCSI] qla2xxx: Properly set the tagging for commands.Saurav Kashyap
This fixes a regression where Xyratex controllers and disks were lost by the driver: https://bugzilla.kernel.org/show_bug.cgi?id=59601 Reported-by: Jack Hill <jackhill@jackhill.us> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23[SCSI] isci: Fix a race condition in the SSP task management pathJeff Skirvin
This commit fixes a race condition in the isci driver abort task and SSP device task management path. The race is caused when an I/O termination in the SCU hardware is necessary because of an SSP target timeout condition, and the check of the I/O end state races against the HW-termination-driven end state. The failure of the race meant that no TMF was sent to the device to clean-up the pending I/O. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Reviewed-by: Lukasz Dorau <lukasz.dorau@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23xen/arm,arm64: update xen_restart after ff701306cd49 and 7b6d864b48d9Stefano Stabellini
Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum reboot_mode) and ff701306cd49 (arm64: use common reboot infrastructure) change the prototype of arm_pm_restart on arm and arm64. Update xen_restart accordingly. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-23mac80211: fix monitor interface suspend crash regressionStanislaw Gruszka
My commit: commit 12e7f517029dad819c45eca9ca01fdb9ba57616b Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Feb 28 10:55:26 2013 +0100 mac80211: cleanup generic suspend/resume procedures removed check for deleting MONITOR and AP_VLAN when suspend. That can cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove interface in the driver that we did not add before. Reference: http://marc.info/?l=linux-kernel&m=137391815113860&w=2 Bisected-by: Ortwin Glück <odi@odi.ch> Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-23drm: remove drm_orderDaniel Vetter
All users of it are now gone! Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/radeon: s/drm_order/order_base_2/Daniel Vetter
Last driver and pretty obviously a major user of this little function. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/r128: s/drm_order/order_base_2/Daniel Vetter
Again just use the version provided by the linux core. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/bufs: s/drm_order/order_base_2/Daniel Vetter
The version offered by the core is ridiculously optimized and does the same thing. So use it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: move drm_getsarea into drm_bufs.cDaniel Vetter
It fiddles the sarea out of the maps which are also handled in drm_bufs.c With this drm_drv.c is a notch more legacy free. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23arm64: Fix definition of arm_pm_restart to match the declarationCatalin Marinas
Commit ff70130 (arm64: use common reboot infrastructure) converted the arm_pm_restart declaration to the new reboot infrastructure but missed the actual definition. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-23arm64: virt: ensure visibility of __boot_cpu_modeMark Rutland
Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a cached value of __boot_cpu_mode may be incoherent with that in memory. This could lead to a failure to detect mismatched boot modes. This patch adds flushing to ensure that writes by secondaries to __boot_cpu_mode are made visible before we test against it. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-23drm/gem: remove drm_gem_object_handle_unreferenceDaniel Vetter
It's unused, everyone is using the _unlocked variant only. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/pci: remove useles #if 1David Herrmann
These don't make any sense, really.. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/gem: simplify object initializationDavid Herrmann
drm_gem_object_init() and drm_gem_private_object_init() do exactly the same (except for shmem alloc) so make the first use the latter to reduce code duplication. Also drop the return code from drm_gem_private_object_init(). It seems unlikely that we will extend it any time soon so no reason to keep it around. This simplifies code paths in drivers, too. Last but not least, fix gma500 to call drm_gem_object_release() before freeing objects that were allocated via drm_gem_private_object_init(). That isn't actually necessary for now, but might be in the future. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: rip out dev->last_checkedDaniel Vetter
Only ever re-cleared in drm_setup, otherwise completely unused. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: fold in drm_sg_alloc into the ioctlDaniel Vetter
There's no other caller from driver code, so we can fold this in. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipsetNeil Horman
Recently we added an early quirk to detect 5500/5520 chipsets with early revisions that had problems with irq draining with interrupt remapping enabled: commit 03bbcb2e7e292838bb0244f5a7816d194c911d62 Author: Neil Horman <nhorman@tuxdriver.com> Date: Tue Apr 16 16:38:32 2013 -0400 iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets It turns out this same problem is present in the intel X58 chipset as well. See errata 69 here: http://www.intel.com/content/www/us/en/chipsets/x58-express-specification-update.html This patch extends the pci early quirk so that the chip devices/revisions specified in the above update are also covered in the same way: Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Donald Dutile <ddutile@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Malcolm Crossley <malcolm.crossley@citrix.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Don Zickus <dzickus@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1374059639-8631-1-git-send-email-nhorman@tuxdriver.com [ Small edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-23drm/radeon: remove DRIVER_HAS_DMA/SG/PCI_DMA from the kms driverDaniel Vetter
Really, this is all old-style stuff and just copy-pasta from the ums driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/nouveau: drop DRIVER_PCI_DMA and DRIVER_SGDaniel Vetter
The former doesn't do anything without DRIVER_HAVE_DMA (which is force-disabled for kms drivers anyway). The latter isn't used by the (kms) nouveau ddx. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: kill dev->buf_readers and dev->buf_writersDaniel Vetter
Again totally unused, so just remove them. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/radoen: kill radeon_dma_ioctl_kmsDaniel Vetter
No need to create a dummy ioctl function to return -EINVAL, since that's what the core already does in the absence of the dma_ioctl callback. So we can safely remove this. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: kill dev->ctx_start and dev->lck_startDaniel Vetter
Again completely unused, so just remove it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: kill dev->interrupt_flag and dev->dma_flagDaniel Vetter
Completely unused, so just remove them. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: remove dev->last_switchDaniel Vetter
Only ever assigned in the context code for real, with no readers anywhere. Remove it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: kill dev->context_waitDaniel Vetter
No one ever waits on this waitqueue, so the wake_up call is wasted. Remove it all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm: remove drm_modctx ioctl and use drm_noop insteadDaniel Vetter
It doesn't do anything, so kill the code. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/i915: fix hdmi portclock limitsDaniel Vetter
In commit 325b9d048810f7689ec644595061c0b700e64bce Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:33 2013 +0200 drm/i915: fixup 12bpc hdmi dotclock handling I've errornously claimed that we don't yet support the hdmi 1.4 dotclocks > 225 MHz on Haswell. But a bug report and a closer look at the wrpll table showed that we've supported port clocks up to 300MHz. With the new code to dynamically compute wrpll limits we should have no issues going up to the full 340 MHz range of hdmi 1.4, so let's just use that to fix this regression. That'll allow 4k over hdmi for free! v2: Drop the random hunk that somehow slipped in. v3: Cantiga has the original HDMI dotclock limit of 165MHz. And also patch up the mode filtering. To do so extract the dotclock limits into a little helper function. v4: Use 300MHz (from Bspec) instead of 340MHz (upper limit for hdmi 1.3), apparently hw is not required to be able to drive the highest dotclocks. Suggested by Damien. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67048 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030 Tested-by: Andreas Reis <andreas.reis@gmail.com> (v2) Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-22ARM: highbank: Only touch common coherency control register fieldsRob Herring
Midway adds new register fields to the coherency control registers, so writing absolute values will break on Midway. Change the register accesses to only modify the necessary and common fields in order to support both Midway and Highbank. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22Merge tag 'nomadik-defconfig-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes From Linus Walleij: This updates the Nomadik defconfig post-v3.11-rc1: - Update the baseline so we need not rely on make oldconfig so much - MMC defconfig updates - Activate NO_HZ_IDLE and HRTIMERS * tag 'nomadik-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22ARM: footbridge: fix overlapping PCI mappingsMike Frysinger
Commit 8ef6e6201b26cb9fde79c1baa08145af6aca2815 (ARM: footbridge: use fixed PCI i/o mapping) broke booting on my netwinder. Before that, everything boots fine. Since then, it crashes on boot. With earlyprintk, I see it BUG-ing like so: kernel BUG at lib/ioremap.c:27! Internal error: Oops - BUG: 0 [#1] ARM ... [<c0139b54>] (ioremap_page_range+0x128/0x154) from [<c02e6a6c>] (dc21285_setup+0xd0/0x114) [<c02e6a6c>] (dc21285_setup+0xd0/0x114) from [<c02e4874>] (pci_common_init+0xa0/0x298) [<c02e4874>] (pci_common_init+0xa0/0x298) from [<c02e793c>] (netwinder_pci_init+0xc/0x18) [<c02e793c>] (netwinder_pci_init+0xc/0x18) from [<c02e27d0>] (do_one_initcall+0xb4/0x180) ... Russell points out it's because of overlapping PCI mappings that was added with the aforementioned commit. Rob thought the code would re-use the static mapping, but that turns out to not be the case and instead hits the BUG further down. After deleting this hunk as suggested by Russel, the system boots up fine again and all my PCI devices work (IDE, ethernet, the DC21285). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22Merge tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo, imx fixes for 3.11: - A few device tree source fixes regarding pinctrl, clock, and pwm backlight. - Fixes imx28 and imx51 audio driver failure caused by sgtl5000 codec driver change by supplying the correct clock for codec. - imx6q emi_sel clock muxing and imx6q-iomuxc-gpr macro fixes * tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx51-babbage: Pass a real clock to the codec ARM i.MX53: mba53: Fix PWM backlight DT node ARM: imx: fix vf610 enet module clock selection ARM: mxs: saif0 is the clock provider to sgtl5000 ARM: i.MX6Q: correct emi_sel clock muxing ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX ARM: i.MX27: Typo fix ARM: imx27: Fix documentation for SPLL clock ARM i.MX53: Fix UART pad configuration
2013-07-22Merge tag 'omap-for-v3.11/fixes-against-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Omap fixes mostly to deal with the dropping of platform data for omap4, and to make v7_defconfig bootable on omap4 SDP with nfsroot. * tag 'omap-for-v3.11/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Provide alias to USB PHY clock ARM: dts: Add missing vmmc2 regulator for twl ARM: multi_v7: Enabled omap4430 sdp nfsroot
generated by cgit (git 2.34.1) at 2025-09-19 08:04:15 +0000