| Age | Commit message (Collapse) | Author |
|---|
|
mptcp_cleanup_rbuf() is responsible to send acks when the user-space
reads enough data to update the receive windows significantly.
It tries hard to avoid acquiring the subflow sockets locks by checking
conditions similar to the ones implemented at the TCP level.
To avoid too much code duplication - the MPTCP protocol can't reuse the
TCP helpers as part of the relevant status is maintained into the msk
socket - and multiple costly window size computation, mptcp_cleanup_rbuf
uses a rough estimate for the most recently advertised window size:
the MPTCP receive free space, as recorded as at last-ack time.
Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect
a zero to non-zero win change in some corner cases, skipping the
tcp_cleanup_rbuf call and leaving the peer stuck.
After commit ea66758c1795 ("tcp: allow MPTCP to update the announced
window"), MPTCP has actually cheap access to the announced window value.
Use it in mptcp_cleanup_rbuf() for a more accurate ack generation.
Fixes: e3859603ba13 ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A Broadcast Sink might require BIG sync to be terminated and
re-established multiple times, while keeping the same PA sync
handle active. This can be possible if the configuration of the
listening (PA sync) socket is reset once all bound BISes are
established and accepted by the user space:
1. The DEFER setup flag needs to be reset on the parent socket,
to allow another BIG create sync procedure to be started on socket
read.
2. The BT_SK_BIG_SYNC flag needs to be cleared on the parent socket,
to allow another BIG create sync command to be sent.
3. The socket state needs to transition from BT_LISTEN to BT_CONNECTED,
to mark that the listening process has completed and another one can
be started if needed.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Eric Dumazet says:
====================
tcp: add a new PAWS_ACK drop reason
Current TCP_RFC7323_PAWS drop reason is too generic and can
cause confusion.
One common source for these drops are ACK packets coming too late.
A prior packet with payload already changed tp->rcv_nxt.
Add TCP_RFC7323_PAWS_ACK new drop reason, and do not
generate a DUPACK for such old ACK.
====================
Link: https://patch.msgid.link/20250113135558.3180360-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason.
This patch adds the corresponding SNMP counter, for folks
using nstat instead of tracing for TCP diagnostics.
nstat -az | grep PAWSOldAck
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following patch is adding a new drop_reason to tcp_validate_incoming().
Change tcp_disordered_ack() to not return a boolean anymore,
but a drop reason.
Change its name to tcp_disordered_ack_check()
Refactor tcp_validate_incoming() to ease the code
review of the following patch, and reduce indentation
level.
This patch is a refactor, with no functional change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a typo in a phydev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250113091555.23594-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, an interface is created in the driver during channel assignment.
If mac80211 attempts to set a key for an interface before this assignment,
the driver caches the key. Once the interface is created, the driver
installs the cached key to the hardware. This sequence is exemplified in
mesh mode operation where the group key is set before channel assignment.
However, in ath12k_mac_update_key_cache(), after caching the key, due to
incorrect logic, it is deleted from the cache during the subsequent loop
iteration. As a result, after the interface is created, the driver does not
find any cached key, and the key is not installed to the hardware which is
wrong. This leads to issue in mesh, where broadcast traffic is not
encrypted over the air.
Fix this issue by adjusting the logic of ath12k_mac_update_key_cache()
properly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3-03253.1-QCAHKSWPL_SILICONZ-29 # Nicolas Escande <nico.escande@gmail.com>
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 # Nicolas Escande <nico.escande@gmail.com>
Fixes: 25e18b9d6b4b ("wifi: ath12k: modify ath12k_mac_op_set_key() for MLO")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://patch.msgid.link/20250112-fix_key_cache_handling-v2-1-70e142c6153e@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
function
Currently, the uninitialized variable 'ab' is accessed in the
ath12k_mac_allocate() function. Initialize 'ab' with the first radio device
present in the hardware abstraction handle (ah). Additionally, move the
default setting procedure from the pdev mapping iteration to the total
radio calculating iteration for better code readability. Perform the
maximum radio validation check for total_radio to ensure that both num_hw
and radio_per_hw are validated indirectly, as these variables are derived
from total_radio. This also fixes the below Smatch static checker warning.
Smatch warning:
ath12k_mac_allocate() error: uninitialized symbol 'ab'
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Fixes: a343d97f27f5 ("wifi: ath12k: move struct ath12k_hw from per device to group")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250112071630.4059410-5-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the ath12k_get_num_hw() helper function takes the device handle
as an argument. Here, the number of hardware is retrieved from the group
handle. Demanding the device handle from the caller is unnecessary since
in some cases the group handle is already available. Additionally, there
is no longer a need for multiple indirections to get the number of
hardware. Therefore, remove this helper function and directly use
ag->num_hw. This change also fixes the below Smatch static checker
warning.
Smatch warning:
ath12k_mac_destroy() error: we previously assumed 'ab' could be null
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/ath12k/3e705de0-67d1-4437-97ff-4828d83ae2af@stanley.mountain/
Closes: https://scan7.scan.coverity.com/#/project-view/52682/11354?selectedIssue=1602340
Fixes: a343d97f27f5 ("wifi: ath12k: move struct ath12k_hw from per device to group")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250112071630.4059410-4-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_hw is placed inside the ath12k_hw_group. However, the
ath12k_hw get helper function takes the device handle and the index as
parameters. Here, the index parameter is specific to the group handle.
Therefore, change this helper function argument from the device handle
to the group handle.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250112071630.4059410-3-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_hw is placed inside the ath12k_hw_group. However, the
ath12k_hw set helper function takes the device handle and the index as
parameters. Here, the index parameter is specific to the group handle.
Therefore, change this helper function argument from the device handle to
the group handle.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250112071630.4059410-2-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
Fixes: 14d1d1908696 ("drm/v3d: Remove the bad signaled() implementation.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
|
|
Allow configuring the DPM watchdog to warn about slow suspend/resume
functions without causing a system panic(). This allows you to set the
DPM_WATCHDOG_WARNING_TIMEOUT to something like 5 or 10 seconds to get
warnings about slow suspend/resume functions that eventually succeed.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://patch.msgid.link/20250109125957.v2.1.I4554f931b8da97948f308ecc651b124338ee9603@changeid
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify a non-kernel-doc comment to begin with /* instead of /**
so that it does not cause a kernel-doc warning.
power.h:114: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Auxiliary structure used for reading the snapshot image data and
power.h:114: warning: missing initial short description on line:
* Auxiliary structure used for reading the snapshot image data and
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20250111063107.910825-1-rdunlap@infradead.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 3c55e94c0ade ("cpufreq: ACPI: Extend frequency tables to cover
boost frequencies") introduced an assumption in acpi_cpufreq_cpu_init()
that the first entry in the P-state table was the nominal frequency.
This assumption is incorrect. The frequency corresponding to the P0
P-State need not be the same as the nominal frequency advertised via
CPPC.
Since the driver is using the CPPC.highest_perf and CPPC.nominal_perf
to compute the boost-ratio, it makes sense to use CPPC.nominal_freq to
compute the max-frequency. CPPC.nominal_freq is advertised on
platforms supporting CPPC revisions 3 or higher.
Hence, fallback to using the first entry in the P-State table only on
platforms that do not advertise CPPC.nominal_freq.
Fixes: 3c55e94c0ade ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250113044107.566-1-gautham.shenoy@amd.com
[ rjw: Retain reverse X-mas tree ordering of local variable declarations ]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible to enable few cpufreq drivers, without the framework
being enabled. This happened due to a bug while moving the entries
earlier. Fix it.
Fixes: 7ee1378736f0 ("cpufreq: Move CPPC configs to common Kconfig and add RISC-V")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/84ac7a8fa72a8fe20487bb0a350a758bce060965.1736488384.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Prevent bwctrl NULL pointer dereference that caused hangs on shutdown
on ASUS ROG Strix SCAR 17 G733PYV (Lukas Wunner)
* tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Fix NULL pointer deref on unbind and bind
|
|
Reorder the existing OBJ/IOCTL lists.
Also run clang-format for the same coding style at line wrappings.
No functional change.
Link: https://patch.msgid.link/r/c5e6d6e0a0bb7abc92ad26937fde19c9426bee96.1736237481.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since commit 02fb4f008433 ("clk: clk-loongson2: Fix potential buffer
overflow in flexible-array member access"), the clk provider register is
failed.
The count of `clks_num` is shown below:
for (p = data; p->name; p++)
clks_num++;
In fact, `clks_num` represents the number of SoC clocks and should be
expressed as the maximum value of the clock binding id in use (p->id + 1).
Now we fix it to avoid the following error when trying to register a clk
provider:
[ 13.409595] of_clk_hw_onecell_get: invalid index 17
Cc: stable@vger.kernel.org
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Fixes: 02fb4f008433 ("clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/82e43d89a9a6791129cf8ea14f4eeb666cd87be4.1736856470.git.zhoubinbin@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Since commit 706ae6446494 ("clk: fixed-rate: add
devm_clk_hw_register_fixed_rate_parent_data()"), we can use the
devm_clk_hw_register_fixed_rate_parent_data() helper and from then on
there is no need to manually unregister the fixed rate hw.
Since clk_hw_unregister_fixed_rate() was not called before, we also fix
the memory leak that was present.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/8733a7485619bdb791de25201a3d7984d1849c9f.1736856470.git.zhoubinbin@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-01-14
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add nic_cap_reg and vhca_icm_ctrl registers
net/mlx5: SHAMPO: Introduce new SHAMPO specific HCA caps
net/mlx5: Add support for MRTCQ register
net/mlx5: Update mlx5_ifc to support FEC for 200G per lane link modes
====================
Link: https://patch.msgid.link/20250114055700.1928736-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce num_reg to store the number of clocks, this helps to make
_clk_get become a common helper function which called jh71x0_clk_get().
With this, it helps to simplify the code and extend the code in the
future.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20250114081300.36600-1-changhuang.liang@starfivetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
Real handling of the linked clocks (clocks of the interconnect port a
peripheral is connected to) on rk3588 using pm-clocks, allowing us to
stop marking them as critical and one more rk3588 critical clock, that
the kernel cannot handle otherwise right now.
* tag 'v6.14-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3588: make refclko25m_ethX critical
clk: rockchip: rk3588: drop RK3588_LINKED_CLK
clk: rockchip: implement linked gate clock support
clk: rockchip: expose rockchip_clk_set_lookup
clk: rockchip: rk3588: register GATE_LINK later
clk: rockchip: support clocks registered late
|
|
Ftrace branch profiling inserts absolute references to its metadata at
call sites, and this implies that this kind of instrumentation cannot be
used while executing from the 1:1 mapping of memory.
Therefore, disable ftrace branch profiling in the SEV startup routines,
by disabling it for the entire SEV core source file.
Closes: https://lore.kernel.org/oe-kbuild-all/202501072244.zZrx9864-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250107151826.820147-2-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One iscsi driver fix and one core fix.
The core fix is an important one because a retry efficiency update is
now causing some USB devices to get the wrong size on discovery (it
upset their retry logic for READ_CAPACITY_16)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request
scsi: core: Fix command pass through retry regression
|
|
To allow for setting a variable from some other tool, like with the
"wallclock" patchset needs to allow the user to opt-in to having
that key in the sort order for 'perf report'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/Z4akewi7UPXpagce@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adds a new BO param that keeps the reservation locked after creation.
This removes the need to re-reserve the BO after creation which is a
waste of cycles.
This also fixes a bug in vmw_prime_import_sg_table where the imported
reservation is unlocked twice.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Fixes: b32233acceff ("drm/vmwgfx: Fix prime import/export")
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110185335.15301-1-ian.forbes@broadcom.com
|
|
Unused since commit a78a8da51b36
("drm/ttm: replace busy placement with flags v6")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108201355.2521070-1-ian.forbes@broadcom.com
|
|
Unlock BOs in reverse order.
Add an acquire context so that lockdep doesn't complain.
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210195535.2074918-1-ian.forbes@broadcom.com
|
|
When IORING_REGISTER_CLONE_BUFFERS is used to clone buffers from uring
instance A to uring instance B, where A and B use different MMs for
accounting, the accounting can go wrong:
If uring instance A is closed before uring instance B, the pinned memory
counters for uring instance B will be decremented, even though the pinned
memory was originally accounted through uring instance A; so the MM of
uring instance B can end up with negative locked memory.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/r/CAG48ez1zez4bdhmeGLEFxtbFADY4Czn3CV0u9d_TMcbvRA01bg@mail.gmail.com
Fixes: 7cc2a6eadcd7 ("io_uring: add IORING_REGISTER_COPY_BUFFERS method")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20250114-uring-check-accounting-v1-1-42e4145aa743@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In 'perf test', a return value 2 represents that the test case was
skipped. Fix this value for perftool_testsuite test cases to
differentiate between skip and pass values.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250113182605.130719-3-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Properly name the test cases of perftool_testsuite instead of the
license being taken as the name for 'perf test'.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250113182605.130719-2-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test failed back and forth due to the call chain being heavily
impacted by the libc, which varies across different architectures and
distros.
The libc contains the symbols for "gaih_inet" and "getaddrinfo" in some
cases, but not always. Moreover, these symbols can be either normal
symbols or dynamic symbols, making it difficult to decide the call chain
entries due to the symbols are inconsistent.
To fix the issue, this commit identifies three call chain entries are
always present. These entries are matched by iterating through the
lines in the "perf script" result. The recording attribute max-stack is
set to 4 for the possible maximum call chain depth.
After:
# perf test -vF pton
--- start ---
Pattern: ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)
Matching: ping 285058 [025] 1219802.466939: probe_libc:inet_pton: (ffffa14b7cf0)
Pattern: .*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib/aarch64-linux-gnu/libc-2.31.so|inlined\)$
Matching: ping 285058 [025] 1219802.466939: probe_libc:inet_pton: (ffffa14b7cf0)
Matching: ffffa14b7cf0 __GI___inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc-2.31.so)
Pattern: .*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$
Matching: ping 285058 [025] 1219802.466939: probe_libc:inet_pton: (ffffa14b7cf0)
Matching: ffffa14b7cf0 __GI___inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc-2.31.so)
Matching: ffffa1488040 getaddrinfo+0xe8 (/usr/lib/aarch64-linux-gnu/libc-2.31.so)
Matching: aaaab8672da4 [unknown] (/usr/bin/ping)
---- end ----
82: probe libc's inet_pton & backtrace it with ping : Ok
Closes: https://lore.kernel.org/linux-perf-users/1728978807-81116-1-git-send-email-renyu.zj@linux.alibaba.com/
Closes: https://lore.kernel.org/linux-perf-users/Z0X3AYUWkAgfPpWj@x1/T/#m57327e135b156047e37d214a0d453af6ae1e02be
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Reported-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241202111958.553403-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Local variables were missing initialization and command line
processing didn't provide default values.
Fixes: 64eed019f3fce124 ("perf inject: Lazy build-id mmap2 event insertion")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241211060831.806539-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename err to out to avoid confusion because buf is still supposed to be
freed in non error cases.
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241211085525.519458-3-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The cycles event will fallback to task-clock in the hybrid test when
running virtualized. Change the test to not fail for this.
Fixes: 65d11821910bd910 ("perf test: Add a test for default perf stat command")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241212173354.9860-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When kernel is built without debuginfo, running 'perf record' with
--off-cpu results in segfault as below:
./perf record --off-cpu -e dummy sleep 1
libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled?
libbpf: failed to find '.BTF' ELF section in /lib/modules/6.13.0-rc3+/build/vmlinux
libbpf: failed to find valid kernel BTF
Segmentation fault (core dumped)
The backtrace pointed to:
#0 0x00000000100fb17c in btf.type_cnt ()
#1 0x00000000100fc1a8 in btf_find_by_name_kind ()
#2 0x00000000100fc38c in btf.find_by_name_kind ()
#3 0x00000000102ee3ac in off_cpu_prepare ()
#4 0x000000001002f78c in cmd_record ()
#5 0x00000000100aee78 in run_builtin ()
#6 0x00000000100af3e4 in handle_internal_command ()
#7 0x000000001001004c in main ()
Code sequence is:
static void check_sched_switch_args(void)
{
struct btf *btf = btf__load_vmlinux_btf();
const struct btf_type *t1, *t2, *t3;
u32 type_id;
type_id = btf__find_by_name_kind(btf, "btf_trace_sched_switch",
BTF_KIND_TYPEDEF);
btf__load_vmlinux_btf() fails when CONFIG_DEBUG_INFO_BTF is not enabled.
Here bpf__find_by_name_kind() calls btf__type_cnt() with NULL btf value
and results in segfault.
To fix this, add a check to see if btf is not NULL before invoking
bpf__find_by_name_kind().
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20241223135813.8175-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
test_adding_kernel
perftool-testsuite_probe fails in test_adding_kernel as below:
Regexp not found: "probe:inode_permission_11"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: force-adding probes ::
second probe adding (with force) (output regexp parsing)
event syntax error: 'probe:inode_permission_11'
\___ unknown tracepoint
Error: File /sys/kernel/tracing//events/probe/inode_permission_11
not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to
enable this feature?.
The test does the following:
1) Adds a probe point first using:
$CMD_PERF probe --add $TEST_PROBE
2) Then tries to add same probe again without —force and expects it to
fail. Next tries to add same probe again with —force. In this case,
perf probe succeeds and adds the probe with a suffix number. Example:
./perf probe --add inode_permission
Added new event:
probe:inode_permission (on inode_permission)
./perf probe --add inode_permission --force
Added new event:
probe:inode_permission_1 (on inode_permission)
./perf probe --add inode_permission --force
Added new event:
probe:inode_permission_2 (on inode_permission)
Each time, suffix is added to existing probe name.
To get the suffix number, test cases uses:
NO_OF_PROBES=`$CMD_PERF probe -l | wc -l`
This will work if there is no other probe existing in the system. If
there are any other probes other than kernel probes or inode_permission,
( example: any probe), "perf probe -l" will include count for other
probes too.
Example, in the system where this failed, already some probes were
default added. So count became 10
./perf probe -l | wc -l
10
So to be specific for "inode_permission", restrict the probe count check
to that probe point alone using:
NO_OF_PROBES=`$CMD_PERF probe -l $TEST_PROBE| wc -l`
Similarly while removing the probe using "probe --del *", (removing all
probes), check uses:
../common/check_all_lines_matched.pl "Removed event: probe:$TEST_PROBE"
But if there are other probes in the system, the log will contain
reference to other existing probe too. Hence change usage of
check_all_lines_matched.pl to check_all_patterns_found.pl This will make
sure expecting string comes in the result
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250110094324.94604-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The standalone tarballs should include the license files - both the
COPYING declaration as well as the text of GPLv2.
Signed-off-by: Michel Lind <michel@michel-slm.name>
Link: https://lore.kernel.org/r/Z0Zcx0WRqtlUYpgw@hyperscale.parallels
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The brstack test runs quite slowly in software models. Part of the reason
is "xargs -n1" is quite inefficient in replacing spaces with newlines.
While that's not noticeable on normal machines, it is on software models.
Use "tr -s ' ' '\n'" instead which can do the same transformation, but is
much faster. For comparison on an M1 Macbook Pro:
$ time seq -s ' ' 10000 | xargs -n1 > /dev/null
real 0m2.729s
user 0m2.009s
sys 0m0.914s
$ time seq -s ' ' 10000 | tr -s ' ' '\n' | grep '.' > /dev/null
real 0m0.002s
user 0m0.001s
sys 0m0.001s
The "grep '.'" is also needed to remove any remaining blank lines.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241213231312.2640687-2-robh@kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
[robh: Drop changing loop iterations on arm64. Squash blank line fix and redo commit msg]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 6.13. This became bigger than wished due to
the timing after holiday breaks.
The only large LOC is the additional document for Cirrus codec which
is nice for users (and absolutely safe). All the rest are small fixes
in ASoC Rcar and codecs as well as HD-audio quirks (And no fix for USB
guitar pedals seen yet :)"
* tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix volume adjustment issue on Lenovo ThinkBook 16P Gen5
ALSA: hda/realtek: fixup ASUS H7606W
ALSA: hda/realtek: fixup ASUS GA605W
ALSA: hda/realtek: Add support for Ayaneo System using CS35L41 HDA
ASoC: rsnd: check rsnd_adg_clk_enable() return value
ASoC: cs42l43: Add codec force suspend/resume ops
ALSA: doc: Add codecs/index.rst to top-level index
ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57
ASoC: samsung: Add missing depends on I2C
MAINTAINERS: add missing maintainers for Simple Audio Card
ASoC: samsung: Add missing selects for MFD_WM8994
ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK
ASoC: wm8994: Add depends on MFD core
ASoC: tas2781: Fix occasional calibration failture
ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise
|
|
Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use
buffer heads or iomap_folio_state structs, and we cannot mix the two.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The recently introduced hotplug event handler in the HDMI Connector
framework attempts to unconditionally read the EDID data, leading to a
bunch of non-harmful, yet quite annoying DDC/I2C related errors being
reported.
Ensure the operation is done only for connectors having the status
connected or unknown. Additionally, perform an explicit reset of the
connector information when dealing with a disconnected status.
Fixes: ab716b74dc9d ("drm/display/hdmi: implement hotplug functions")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-hdmi-conn-edid-read-fix-v2-1-d2a0438a44ab@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Resolve a UBSAN shift-out-of-bounds issue in iova_bitmap_offset_to_index()
where shifting the constant "1" (of type int) by bitmap->mapped.pgshift
(an unsigned long value) could result in undefined behavior.
The constant "1" defaults to a 32-bit "int", and when "pgshift" exceeds
31 (e.g., pgshift = 63) the shift operation overflows, as the result
cannot be represented in a 32-bit type.
To resolve this, the constant is updated to "1UL", promoting it to an
unsigned long type to match the operand's type.
Fixes: 58ccf0190d19 ("vfio: Add an IOVA bitmap support")
Link: https://patch.msgid.link/r/20250113223820.10713-1-qasdev00@gmail.com
Reported-by: syzbot <syzbot+85992ace37d5b7b51635@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=85992ace37d5b7b51635
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix an issue detected by syzbot:
WARNING in iommufd_device_unbind iommufd: Time out waiting for iommufd object to become free
Resolve a warning in iommufd_device_unbind caused by a timeout while
waiting for the shortterm_users reference count to reach zero. The
existing 10-second timeout is insufficient in some scenarios, resulting in
failures the above warning.
Increase the timeout in iommufd_object_dec_wait_shortterm from 10 seconds
to 60 seconds to allow sufficient time for the reference count to drop to
zero. This change prevents premature timeouts and reduces the likelihood
of warnings during iommufd_device_unbind.
Fixes: 6f9c4d8c468c ("iommufd: Do not UAF during iommufd_put_object()")
Link: https://patch.msgid.link/r/20241123195900.3176-1-surajsonawane0215@gmail.com
Reported-by: syzbot+c92878e123785b1fa2db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c92878e123785b1fa2db
Tested-by: syzbot+c92878e123785b1fa2db@syzkaller.appspotmail.com
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Atomic check should succeed when disabling a connector. Add a test
case drm_test_check_disabling_connector() to make sure of this.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-3-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's ok to pass atomic check successfully if an atomic commit tries to
disable the display pipeline which the connector belongs to. That is,
when the crtc or the best_encoder pointers in struct drm_connector_state
are NULL, drm_atomic_helper_connector_hdmi_check() should return 0.
Without the check against the NULL pointers, drm_default_rgb_quant_range()
called by drm_atomic_helper_connector_hdmi_check() would dereference
the NULL pointer to_match in drm_match_cea_mode().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
drm_default_rgb_quant_range+0x0/0x4c (P)
drm_bridge_connector_atomic_check+0x20/0x2c
drm_atomic_helper_check_modeset+0x488/0xc78
drm_atomic_helper_check+0x20/0xa4
drm_atomic_check_only+0x4b8/0x984
drm_atomic_commit+0x48/0xc4
drm_framebuffer_remove+0x44c/0x530
drm_mode_rmfb_work_fn+0x7c/0xa0
process_one_work+0x150/0x294
worker_thread+0x2dc/0x3dc
kthread+0x130/0x204
ret_from_fork+0x10/0x20
Fixes: 8ec116ff21a9 ("drm/display: bridge_connector: provide atomic_check for HDMI bridges")
Fixes: 84e541b1e58e ("drm/sun4i: use drm_atomic_helper_connector_hdmi_check()")
Fixes: 65548c8ff0ab ("drm/rockchip: inno_hdmi: Switch to HDMI connector")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-2-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The GHES driver overrides the panic= setting by force-rebooting the
system after a fatal hw error has been reported. The intent being that
such an error would be reported earlier.
However, this is not optimal when a hard-to-debug issue requires long
time to reproduce and when that happens, the box will get rebooted after
30 seconds and thus destroy the whole hw context of when the error
happened.
So rip out the default GHES panic timeout and honor the global one.
In the panic disabled (panic=0) case, the error will still be logged to
dmesg for later inspection and if panic after a hw error is really
required, then that can be controlled the usual way - use panic= on the
cmdline or set it in the kernel .config's CONFIG_PANIC_TIMEOUT.
Reported-by: Feng Tang <feng.tang@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250113125224.GFZ4UMiNtWIJvgpveU@fat_crate.local
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Seen the following build error:
./include/linux/prmt.h:5:27: error: unknown type name ‘guid_t’
5 | int acpi_call_prm_handler(guid_t handler_guid, void *param_buffer);
| ^~~~~~
The include file uses guid_t but it is not declared. Include
linux/uuid.h to fix this.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://patch.msgid.link/20250107161923.3387552-1-rrichter@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
