summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-28sctp: avoid flushing unsent queue when doing asoc resetXin Long
Now when doing asoc reset, it cleans up sacked and abandoned queues by calling sctp_outq_free where it also cleans up unsent, retransmit and transmitted queues. It's safe for the sender of response, as these 3 queues are empty at that time. But when the receiver of response is doing the reset, the users may already enqueue some chunks into unsent during the time waiting the response, and these chunks should not be flushed. To void the chunks in it would be removed, it moves the queue into a temp list, then gets it back after sctp_outq_free is done. The patch also fixes some incorrect comments in sctp_process_strreset_tsnreq. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: only allow the asoc reset when the asoc outq is emptyXin Long
As it says in rfc6525#section5.1.4, before sending the request, C2: The sender has either no outstanding TSNs or considers all outstanding TSNs abandoned. Prior to this patch, it tried to consider all outstanding TSNs abandoned by dropping all chunks in all outqs with sctp_outq_free (even including sacked, retransmit and transmitted queues) when doing this reset, which is too aggressive. To make it work gently, this patch will only allow the asoc reset when the sender has no outstanding TSNs by checking if unsent, transmitted and retransmit are all empty with sctp_outq_is_empty before sending and processing the request. Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: only allow the out stream reset when the stream outq is emptyXin Long
Now the out stream reset in sctp stream reconf could be done even if the stream outq is not empty. It means that users can not be sure since which msg the new ssn will be used. To make this more synchronous, it shouldn't allow to do out stream reset until these chunks in unsent outq all are sent out. This patch checks the corresponding stream outqs when sending and processing the request . If any of them has unsent chunks in outq, it will return -EAGAIN instead or send SCTP_STRRESET_IN_PROGRESS back to the sender. Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: use sizeof(__u16) for each stream number length instead of magic numberXin Long
Now in stream reconf part there are still some places using magic number 2 for each stream number length. To make it more readable, this patch is to replace them with sizeof(__u16). Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27media: videobuf2: don't use kernel-doc "/**" markupsMauro Carvalho Chehab
While it would be very cool to have those functions using kernel-doc markups, the reality right now is that they don't follow kernel-doc rules, as parameters aren't documented. So, stop abusing on "/**" markups. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: imon: don't use kernel-doc "/**" markupsMauro Carvalho Chehab
The function documentation here doesn't follow kernel-doc, as parameters aren't documented. So, stop abusing on "/**" markups. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: ir-nec-decoder: fix kernel-doc parametersMauro Carvalho Chehab
Some parameters aren't correctly identified, as noticed by those warnings: drivers/media/rc/ir-nec-decoder.c:49: warning: No description found for parameter 'ev' drivers/media/rc/ir-nec-decoder.c:49: warning: Excess function parameter 'duration' description in 'ir_nec_decode' drivers/media/rc/ir-nec-decoder.c:189: warning: Excess function parameter 'raw' description in 'ir_nec_scancode_to_raw' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: dvb_net: stop abusing /** for commentsMauro Carvalho Chehab
The comments that start with "/**" aren't kernel-doc stuff. So, just start them with "/*". Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: rc-ir-raw: cleanup kernel-doc markupsMauro Carvalho Chehab
Cleanup those warnings: drivers/media/rc/rc-ir-raw.c:141: warning: No description found for parameter 'ev' drivers/media/rc/rc-ir-raw.c:141: warning: Excess function parameter 'type' description in 'ir_raw_event_store_with_filter' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: dvb_frontend fix kernel_doc markupsMauro Carvalho Chehab
There were some troubles there: drivers/media/dvb-core/dvb_frontend.c:379: warning: No description found for parameter 'fe' drivers/media/dvb-core/dvb_frontend.c:379: warning: No description found for parameter 'check_wrapped' drivers/media/dvb-core/dvb_frontend.c:1265: warning: No description found for parameter 'p_out' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: vpif: don't generate a kernel-doc warning on a constantMauro Carvalho Chehab
Constants documentation is not supported by kernel-doc markups. So, change the comment label to avoid this warning: drivers/media/platform/davinci/vpif.c:54: warning: cannot understand function prototype: 'const struct vpif_channel_config_params vpif_ch_params[] = ' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: drxj and drxk: don't produce kernel-doc warningsMauro Carvalho Chehab
Those drivers use a different notation for comments. While it is not worth converting to kernel-doc, removing it is also not an option. So, just replace /** by /* and be happy :-) Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: img-ir-hw: fix one kernel-doc commentMauro Carvalho Chehab
Needed to suppress the following warnings: drivers/media/rc/img-ir/img-ir-hw.c:351: warning: No description found for parameter 'reg_timings' drivers/media/rc/img-ir/img-ir-hw.c:351: warning: Excess function parameter 'timings' description in 'img_ir_decoder_convert' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27btrfs: fix deadlock when writing out space cacheJosef Bacik
If we fail to prepare our pages for whatever reason (out of memory in our case) we need to make sure to drop the block_group->data_rwsem, otherwise hilarity ensues. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add label and use existing unlocking code ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-11-27media: siano: get rid of documentation warningsMauro Carvalho Chehab
The Siano driver doesn't use kernel-doc markups. While it would be wanderful to convert to use it, it is probably not worth the time. So, instead of solving all problems there, just make sure that it won't produce dozens of warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: rc: fix lots of documentation warningsMauro Carvalho Chehab
Building the driver with gcc 7.2.1 and: make ARCH=i386 CF=-D__CHECK_ENDIAN__ CONFIG_DEBUG_SECTION_MISMATCH=y W=1 CHECK='' M=drivers/media now produces a lot of warnings: drivers/media/rc/rc-main.c:278: warning: No description found for parameter 'new_keycode' drivers/media/rc/rc-main.c:278: warning: Excess function parameter 'keycode' description in 'ir_update_mapping' drivers/media/rc/rc-main.c:387: warning: No description found for parameter 'ke' drivers/media/rc/rc-main.c:387: warning: No description found for parameter 'old_keycode' drivers/media/rc/rc-main.c:387: warning: Excess function parameter 'scancode' description in 'ir_setkeycode' drivers/media/rc/rc-main.c:387: warning: Excess function parameter 'keycode' description in 'ir_setkeycode' drivers/media/rc/rc-main.c:433: warning: Excess function parameter 'to' description in 'ir_setkeytable' drivers/media/rc/rc-main.c:506: warning: No description found for parameter 'ke' drivers/media/rc/rc-main.c:506: warning: Excess function parameter 'scancode' description in 'ir_getkeycode' drivers/media/rc/rc-main.c:506: warning: Excess function parameter 'keycode' description in 'ir_getkeycode' drivers/media/rc/rc-main.c:634: warning: No description found for parameter 't' drivers/media/rc/rc-main.c:634: warning: Excess function parameter 'cookie' description in 'ir_timer_keyup' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: dvb_ca_en50221: fix lots of documentation warningsMauro Carvalho Chehab
Building the driver with gcc 7.2.1 and: make ARCH=i386 CF=-D__CHECK_ENDIAN__ CONFIG_DEBUG_SECTION_MISMATCH=y W=1 CHECK='' M=drivers/media now produces a lot of warnings: drivers/media/dvb-core/dvb_ca_en50221.c:233: warning: No description found for parameter 'ca' drivers/media/dvb-core/dvb_ca_en50221.c:233: warning: No description found for parameter 'slot' drivers/media/dvb-core/dvb_ca_en50221.c:284: warning: No description found for parameter 'timeout_hz' drivers/media/dvb-core/dvb_ca_en50221.c:284: warning: Excess function parameter 'timeout_ms' description in 'dvb_ca_en50221_wait_if_status' drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: No description found for parameter 'tuple_type' drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: No description found for parameter 'tuple_length' drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: Excess function parameter 'tupleType' description in 'dvb_ca_en50221_read_tuple' drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: Excess function parameter 'tupleLength' description in 'dvb_ca_en50221_read_tuple' drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: No description found for parameter 'buf' drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: No description found for parameter 'bytes_write' drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: Excess function parameter 'ebuf' description in 'dvb_ca_en50221_write_data' drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: Excess function parameter 'count' description in 'dvb_ca_en50221_write_data' drivers/media/dvb-core/dvb_ca_en50221.c:942: warning: No description found for parameter 'pubca' drivers/media/dvb-core/dvb_ca_en50221.c:942: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_camchange_irq' drivers/media/dvb-core/dvb_ca_en50221.c:970: warning: No description found for parameter 'pubca' drivers/media/dvb-core/dvb_ca_en50221.c:970: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_camready_irq' drivers/media/dvb-core/dvb_ca_en50221.c:990: warning: No description found for parameter 'pubca' drivers/media/dvb-core/dvb_ca_en50221.c:990: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_frda_irq' drivers/media/dvb-core/dvb_ca_en50221.c:1304: warning: No description found for parameter 'data' drivers/media/dvb-core/dvb_ca_en50221.c:1348: warning: No description found for parameter 'parg' drivers/media/dvb-core/dvb_ca_en50221.c:1348: warning: Excess function parameter 'inode' description in 'dvb_ca_en50221_io_do_ioctl' drivers/media/dvb-core/dvb_ca_en50221.c:1348: warning: Excess function parameter 'arg' description in 'dvb_ca_en50221_io_do_ioctl' drivers/media/dvb-core/dvb_ca_en50221.c:1432: warning: Excess function parameter 'inode' description in 'dvb_ca_en50221_io_ioctl' drivers/media/dvb-core/dvb_ca_en50221.c:1544: warning: No description found for parameter 'ca' drivers/media/dvb-core/dvb_ca_en50221.c:1544: warning: No description found for parameter 'result' drivers/media/dvb-core/dvb_ca_en50221.c:1544: warning: No description found for parameter '_slot' drivers/media/dvb-core/dvb_ca_en50221.c:1849: warning: No description found for parameter 'pubca' drivers/media/dvb-core/dvb_ca_en50221.c:1849: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_init' drivers/media/dvb-core/dvb_ca_en50221.c:1936: warning: No description found for parameter 'pubca' drivers/media/dvb-core/dvb_ca_en50221.c:1936: warning: Excess function parameter 'ca_dev' description in 'dvb_ca_en50221_release' drivers/media/dvb-core/dvb_ca_en50221.c:1936: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_release' Trivially fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27Merge tag 'v4.15-rc1' into patchworkMauro Carvalho Chehab
Linux 4.15-rc1 * tag 'v4.15-rc1': (12179 commits) Linux 4.15-rc1 ARM: BUG if jumping to usermode address in kernel mode m68k/macboing: Fix missed timer callback assignment afs: remove redundant assignment of dvnode to itself afs: cell: Remove unnecessary code in afs_lookup_cell afs: Fix signal handling in some file ops afs: Fix some dentry handling in dir ops and missing key_puts afs: Make afs_write_begin() avoid writing to a page that's being stored sched/debug: Fix task state recording/printout x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero ipvlan: Fix insufficient skb linear check for ipv6 icmp ipvlan: Fix insufficient skb linear check for arp geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6 net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY ...
2017-11-27usb: bdc: fix platform_no_drv_owner.cocci warningsVasyl Gomonovych
Remove .owner field if calls are used which set it automatically drivers/usb/gadget/udc/bdc/bdc_core.c:645:3-8: No need to set .owner here. The core will do it. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-27usb: gadget: ffs: Forbid usb_ep_alloc_request from sleepingVincent Pelletier
Found using DEBUG_ATOMIC_SLEEP while submitting an AIO read operation: [ 100.853642] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 100.861148] in_atomic(): 1, irqs_disabled(): 1, pid: 1880, name: python [ 100.867954] 2 locks held by python/1880: [ 100.867961] #0: (&epfile->mutex){....}, at: [<f8188627>] ffs_mutex_lock+0x27/0x30 [usb_f_fs] [ 100.868020] #1: (&(&ffs->eps_lock)->rlock){....}, at: [<f818ad4b>] ffs_epfile_io.isra.17+0x24b/0x590 [usb_f_fs] [ 100.868076] CPU: 1 PID: 1880 Comm: python Not tainted 4.14.0-edison+ #118 [ 100.868085] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 100.868093] Call Trace: [ 100.868122] dump_stack+0x47/0x62 [ 100.868156] ___might_sleep+0xfd/0x110 [ 100.868182] __might_sleep+0x68/0x70 [ 100.868217] kmem_cache_alloc_trace+0x4b/0x200 [ 100.868248] ? dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3] [ 100.868302] dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3] [ 100.868343] usb_ep_alloc_request+0x16/0xc0 [udc_core] [ 100.868386] ffs_epfile_io.isra.17+0x444/0x590 [usb_f_fs] [ 100.868424] ? _raw_spin_unlock_irqrestore+0x27/0x40 [ 100.868457] ? kiocb_set_cancel_fn+0x57/0x60 [ 100.868477] ? ffs_ep0_poll+0xc0/0xc0 [usb_f_fs] [ 100.868512] ffs_epfile_read_iter+0xfe/0x157 [usb_f_fs] [ 100.868551] ? security_file_permission+0x9c/0xd0 [ 100.868587] ? rw_verify_area+0xac/0x120 [ 100.868633] aio_read+0x9d/0x100 [ 100.868692] ? __fget+0xa2/0xd0 [ 100.868727] ? __might_sleep+0x68/0x70 [ 100.868763] SyS_io_submit+0x471/0x680 [ 100.868878] do_int80_syscall_32+0x4e/0xd0 [ 100.868921] entry_INT80_32+0x2a/0x2a [ 100.868932] EIP: 0xb7fbb676 [ 100.868941] EFLAGS: 00000292 CPU: 1 [ 100.868951] EAX: ffffffda EBX: b7aa2000 ECX: 00000002 EDX: b7af8368 [ 100.868961] ESI: b7fbb660 EDI: b7aab000 EBP: bfb6c658 ESP: bfb6c638 [ 100.868973] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-27ARM: avoid faulting on qemuRussell King
When qemu starts a kernel in a bare environment, the default SCR has the AW and FW bits clear, which means that the kernel can't modify the PSR A or PSR F bits, and means that FIQs and imprecise aborts are always masked. When running uboot under qemu, the AW and FW SCR bits are set, and the kernel functions normally - and this is how real hardware behaves. Fix this for qemu by ignoring the FIQ bit. Fixes: 8bafae202c82 ("ARM: BUG if jumping to usermode address in kernel mode") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-27mac80211: tear down RX aggregations firstSara Sharon
When doing HW restart we tear down aggregations. Since at this point we are not TX'ing any aggregation, while the peer is still sending RX aggregation over the air, it will make sense to tear down the RX aggregations first. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-27mac80211: fix the update of path metric for RANN frameChun-Yeow Yeoh
The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-27mac80211: use QoS NDP for AP probingJohannes Berg
When connected to a QoS/WMM AP, mac80211 should use a QoS NDP for probing it, instead of a regular non-QoS one, fix this. Change all the drivers to *not* allow QoS NDP for now, even though it looks like most of them should be OK with that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-27Merge tag 'v4.15-rc1' into drm-misc-fixesDaniel Vetter
Linux 4.15-rc1 Pull in the merge window to resync. Dave didn't get his -fixes pull landed in time, and now there's another rockchip fix pending, so fast-forwarding isn't possible, hence backmerge. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-11-27drm/arm: Replace instances of drm_dev_unref with drm_dev_put.Srishti Sharma
Replace drm_dev_unref with drm_dev_put as it is more consistent with kernel coding style. Done using the following semantic patch by coccinelle. @r@ expression e; @@ -drm_dev_unref(); +drm_dev_put(); Signed-off-by: Srishti Sharma <srishtishar@gmail.com> [split into hdlcd and malidp specific patches] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2017-11-27drm: Fix checkpatch issue: "WARNING: braces {} are not necessary for single ↵Vitor Massaru Iha
statement blocks." Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2017-11-27USB: serial: option: add Quectel BG96 idSebastian Sjoholm
Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to option.c to allow DIAG,GPS,AT and modem communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-11-27drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enableMirza Krak
In the case where the bind gets deferred we would end up with a un-balanced runtime PM enable call. Fix this by simply moving the pm_runtime_enable call to the end of the bind function when all paths have succeeded. Signed-off-by: Mirza Krak <mirza.krak@endian.se> Signed-off-by: Sandy Huang <hjc@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510734286-37434-1-git-send-email-mirza.krak@endian.se
2017-11-26hwmon: Drop reference to Jean's treeJean Delvare
This tree has not been used for over a year, Guenter is taking all the hwmon patches in practice. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-26Linux 4.15-rc1v4.15-rc1Linus Torvalds
2017-11-26openvswitch: fix the incorrect flow action alloc sizezhangliping
If we want to add a datapath flow, which has more than 500 vxlan outputs' action, we will get the following error reports: openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Actions may not be safe on all matching packets ... ... It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but this is not the root cause. For example, for a vxlan output action, we need about 60 bytes for the nlattr, but after it is converted to the flow action, it only occupies 24 bytes. This means that we can still support more than 1000 vxlan output actions for a single datapath flow under the the current 32k max limitation. So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we shouldn't report EINVAL and keep it move on, as the judgement can be done by the reserve_sfa_size. Signed-off-by: zhangliping <zhangliping02@baidu.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-26Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - LPAE fixes for kernel-readonly regions - Fix for get_user_pages_fast on LPAE systems - avoid tying decompressor to a particular platform if DEBUG_LL is enabled - BUG if we attempt to return to userspace but the to-be-restored PSR value keeps us in privileged mode (defeating an issue that ftracetest found) * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: BUG if jumping to usermode address in kernel mode ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE ARM: 8721/1: mm: dump: check hardware RO bit for LPAE ARM: make decompressor debug output user selectable ARM: fix get_user_pages_fast
2017-11-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
2017-11-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - topology enumeration fixes - KASAN fix - two entry fixes (not yet the big series related to KASLR) - remove obsolete code - instruction decoder fix - better /dev/mem sanity checks, hopefully working better this time - pkeys fixes - two ACPI fixes - 5-level paging related fixes - UMIP fixes that should make application visible faults more debuggable - boot fix for weird virtualization environment * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable x86/entry/64: Add missing irqflags tracing to native_load_gs_index() x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing x86/pkeys/selftests: Fix protection keys write() warning x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey' x86/mpx/selftests: Fix up weird arrays x86/pkeys: Update documentation about availability x86/umip: Print a warning into the syslog if UMIP-protected instructions are used x86/smpboot: Fix __max_logical_packages estimate x86/topology: Avoid wasting 128k for package id array perf/x86/intel/uncore: Cache logical pkg id in uncore driver x86/acpi: Reduce code duplication in mp_override_legacy_irq() x86/acpi: Handle SCI interrupts above legacy space gracefully x86/boot: Fix boot failure when SMP MP-table is based at 0 x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/selftests: Add test for mapping placement for 5-level paging ...
2017-11-26Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: a documentation fix, a Sparse warning fix and a debugging fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix task state recording/printout sched/deadline: Don't use dubious signed bitfields sched/deadline: Fix the description of runtime accounting in the documentation
2017-11-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: two PMU driver fixes and a memory leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix memory leak triggered by perf --namespace perf/x86/intel/uncore: Add event constraint for BDX PCU perf/x86/intel: Hide TSX events when RTM is not supported
2017-11-26Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static key fix from Ingo Molnar: "Fix a boot warning related to bad init ordering of the static keys self-test" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Invoke jump_label_test() via early_initcall()
2017-11-26Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes, most of them related to making the UAPI header-syncing warnings easier to read and easier to act upon" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/headers: Sync objtool UAPI header objtool: Fix cross-build objtool: Move kernel headers/code sync check to a script objtool: Move synced files to their original relative locations objtool: Make unreachable annotation inline asms explicitly volatile objtool: Add a comment for the unreachable annotation macros
2017-11-27net: openvswitch: datapath: fix data type in queue_gso_packetsGustavo A. R. Silva
gso_type is being used in binary AND operations together with SKB_GSO_UDP. The issue is that variable gso_type is of type unsigned short and SKB_GSO_UDP expands to more than 16 bits: SKB_GSO_UDP = 1 << 16 this makes any binary AND operation between gso_type and SKB_GSO_UDP to be always zero, hence making some code unreachable and likely causing undesired behavior. Fix this by changing the data type of variable gso_type to unsigned int. Addresses-Coverity-ID: 1462223 Fixes: 0c19f846d582 ("net: accept UFO datagrams from tuntap and packet") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-26ARM: BUG if jumping to usermode address in kernel modeRussell King
Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-26nvme-rdma: Use mr poolIsrael Rukshin
Currently, blk_mq_tagset_iter() iterate over initial hctx tags only. If an I/O scheduler is used, it doesn't iterate the hctx scheduler tags and the static request aren't been updated. For example, while using NVMe over Fabrics RDMA host, this cause us not to reinit the scheduler requests and thus not re-register all the memory regions during the tagset re-initialization in the reconnect flow. This may lead to a memory registration error: "MEMREG for CQE 0xffff88044c14dce8 failed with status memory management operation error (6)" With this commit we don't need to reinit the requests, and thus fix this failure. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26nvme-rdma: Check remotely invalidated rkey matches our expected rkeySagi Grimberg
If we got a remote invalidation on a bogus rkey, this is a protocol error. Fail the connection in this case. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26nvme-rdma: wait for local invalidation before completing a requestSagi Grimberg
We must not complete a request before the host memory region is invalidated. Luckily we have send with invalidate protocol support so we usually don't need to execute it, but in case the target did not invalidate a memory region for us, we must wait for the invalidation to complete before unmapping host memory and completing the I/O. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26nvme-rdma: don't complete requests before a send work request has completedSagi Grimberg
In order to guarantee that the HCA will never get an access violation (either from invalidated rkey or from iommu) when retrying a send operation we must complete a request only when both send completion and the nvme cqe has arrived. We need to set the send/recv completions flags atomically because we might have more than a single context accessing the request concurrently (one is cq irq-poll context and the other is user-polling used in IOCB_HIPRI). Only then we are safe to invalidate the rkey (if needed), unmap the host buffers, and complete the IO. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26nvme-rdma: don't suppress send completionsSagi Grimberg
The entire completions suppress mechanism is currently broken because the HCA might retry a send operation (due to dropped ack) after the nvme transaction has completed. In order to handle this, we signal all send completions and introduce a separate done handler for async events as they will be handled differently (as they don't include in-capsule data by definition). Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26uapi: fix linux/kfd_ioctl.h userspace compilation errorsDmitry V. Levin
Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix the following linux/kfd_ioctl.h userspace compilation errors: /usr/include/linux/kfd_ioctl.h:236:2: error: unknown type name 'uint64_t' uint64_t va_addr; /* to KFD */ /usr/include/linux/kfd_ioctl.h:237:2: error: unknown type name 'uint32_t' uint32_t gpu_id; /* to KFD */ /usr/include/linux/kfd_ioctl.h:238:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/linux/kfd_ioctl.h:243:2: error: unknown type name 'uint64_t' uint64_t tile_config_ptr; /usr/include/linux/kfd_ioctl.h:245:2: error: unknown type name 'uint64_t' uint64_t macro_tile_config_ptr; /usr/include/linux/kfd_ioctl.h:249:2: error: unknown type name 'uint32_t' uint32_t num_tile_configs; /usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t' uint32_t num_macro_tile_configs; /usr/include/linux/kfd_ioctl.h:255:2: error: unknown type name 'uint32_t' uint32_t gpu_id; /* to KFD */ /usr/include/linux/kfd_ioctl.h:256:2: error: unknown type name 'uint32_t' uint32_t gb_addr_config; /* from KFD */ /usr/include/linux/kfd_ioctl.h:257:2: error: unknown type name 'uint32_t' uint32_t num_banks; /* from KFD */ /usr/include/linux/kfd_ioctl.h:258:2: error: unknown type name 'uint32_t' uint32_t num_ranks; /* from KFD */ Fixes: 6a1c9510694fe ("drm/amdkfd: Adding new IOCTL for scratch memory v2") Fixes: 5d71dbc3a5886 ("drm/amdkfd: Implement image tiling mode support v2") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-11-26drm/amdkfd: fix amdkfd use-after-free GP faultRandy Dunlap
Fix GP fault caused by dev_info() reference to a struct device* after the device has been freed (use after free). kfd_chardev_exit() frees the device so 'kfd_device' should not be used after calling kfd_chardev_exit(). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-11-26drm/amdkfd: Fix SDMA oversubsription handlingFelix Kuehling
SDMA only supports a fixed number of queues. HWS cannot handle oversubscription. Signed-off-by: shaoyun liu <shaoyun.liu@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-11-26drm/amdkfd: Fix SDMA ring buffer size calculationshaoyunl
ffs function return the position of the first bit set on 1 based. (bit zero returns 1). Signed-off-by: shaoyun liu <shaoyun.liu@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-14 18:38:24 +0000