summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-18dynamic_debug: remove num_enabled accountingJason Baron
The num_enabled accounting isn't actually used anywhere - remove them. Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18dynamic_debug: consolidate repetitive struct _ddebug descriptor definitionsJason Baron
Replace the repetitive struct _ddebug descriptor definitions with a new DECLARE_DYNAMIC_DEBUG_META_DATA(name, fmt) macro. [akpm@linux-foundation.org: s/DECLARE/DEFINE/] Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18uio: Support physical addresses >32 bits on 32-bit systemsKai Jiang
To support >32-bit physical addresses for UIO_MEM_PHYS type we need to extend the width of 'addr' in struct uio_mem. Numerous platforms like embedded PPC, ARM, and X86 have support for systems with larger physical address than logical. Since 'addr' may contain a physical, logical, or virtual address the easiest solution is to just change the type to 'phys_addr_t' which should always be greater than or equal to the sizeof(void *) such that it can properly hold any of the address types. For physical address we can support up to a 44-bit physical address on a typical 32-bit system as we utilize remap_pfn_range() for the mapping of the memory region and pfn's are represnted by shifting the address by the page size (typically 4k). Signed-off-by: Kai Jiang <Kai.Jiang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tools, slub: Fix off-by-one buffer corruption after readlink() callThomas Jarosch
readlink() never zero terminates the provided buffer. Therefore we already do buffer[count] = 0; This leads to an off-by-one buffer corruption as readlink() might return the full size of the buffer. The common technique is to reduce the buffer size by one. Another fix would be to check if (count < 0 || count == sizeof(buffer)) fatal(); Reducing the buffer size by one is easier IMHO. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Christoph Lameter <cl@gentwo.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-10-18NFS: Use the inode->i_version to cache NFSv4 change attribute informationTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18SUNRPC: Remove unnecessary export of rpc_sockaddr2uaddrTrond Myklebust
It is only used internally by the RPC code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18SUNRPC: Fix rpc_sockaddr2uaddrTrond Myklebust
rpc_sockaddr2uaddr is only used by net/sunrpc/rpcb_clnt.c, where it is used in a non-blockable context in at least one case. Add non-blocking capability by adding a gfp_t argument Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18nfs/super.c: local functions should be staticH Hartley Sweeten
commit ae50c0b5 "pnfs: client stats" added additional information to the output of /proc/self/mountstats. The new functions introduced are only used in this file and should be marked static. If CONFIG_NFS_V4_1 is not defined, empty stub functions are used. If CONFIG_NFS_V4 is not defined these stub functions are not used at all. Adding static for the functions results in compile warnings: fs/nfs/super.c:743: warning: 'show_sessions' defined but not used fs/nfs/super.c:756: warning: 'show_pnfs' defined but not used Fix this by adding a #ifdef CONFIG_NFS_V4 guard around the two show_ functions. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfsblock: fix writeback deadlockPeng Tao
We should check if the sector is already initialized before trying to grab the page from page cache. Otherwise when two pages of the same block are written back by two threads each calling from writepage_locked, it can cause deadlock like bellow. [ 1080.972099] INFO: task kswapd0:25 blocked for more than 120 seconds. [ 1080.972377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.972812] kswapd0 D ffff88000c4926c0 0 25 2 0x00000000 [ 1080.972816] ffff88000df276b0 0000000000000046 ffff88000df27640 ffffffff81013ba7 [ 1080.972821] ffff88000c492310 ffff88000df27fd8 ffff88000df27fd8 00000000001d3440 [ 1080.972824] ffff88000c378000 ffff88000c492310 ffff8800175d3d40 ffff880017fc75a8 [ 1080.972828] Call Trace: [ 1080.972860] [<ffffffff81013ba7>] ? read_tsc+0x9/0x19 [ 1080.972877] [<ffffffff810e0b23>] ? lock_page+0x2b/0x2b [ 1080.972899] [<ffffffff81475a1d>] io_schedule+0x63/0x7e [ 1080.972902] [<ffffffff810e0b31>] sleep_on_page+0xe/0x12 [ 1080.972905] [<ffffffff81475fe8>] __wait_on_bit_lock+0x46/0x8f [ 1080.972916] [<ffffffff810822d7>] ? lock_release_holdtime.part.7+0x6b/0x72 [ 1080.972919] [<ffffffff810e0af6>] __lock_page+0x66/0x68 [ 1080.972928] [<ffffffff81072705>] ? autoremove_wake_function+0x3d/0x3d [ 1080.972932] [<ffffffff810e0b1f>] lock_page+0x27/0x2b [ 1080.972934] [<ffffffff810e0bcf>] find_lock_page+0x34/0x57 [ 1080.972937] [<ffffffff810e1738>] find_or_create_page+0x34/0x8a [ 1080.972947] [<ffffffffa034245b>] bl_write_pagelist+0x205/0x6da [blocklayoutdriver] [ 1080.972951] [<ffffffffa034145d>] ? bl_free_lseg+0x38/0x38 [blocklayoutdriver] [ 1080.972995] [<ffffffffa02e27b9>] ? nfs_write_rpcsetup+0x118/0x123 [nfs] [ 1080.973033] [<ffffffffa030246b>] pnfs_generic_pg_writepages+0x10b/0x1f4 [nfs] [ 1080.973089] [<ffffffffa02deaae>] nfs_pageio_doio+0x1a/0x43 [nfs] [ 1080.973098] [<ffffffffa02df035>] nfs_pageio_complete+0x16/0x2d [nfs] [ 1080.973108] [<ffffffffa02e2d8f>] nfs_writepage_locked+0xa0/0xbf [nfs] [ 1080.973119] [<ffffffffa02e36a1>] nfs_writepage+0x16/0x2b [nfs] [ 1080.973122] [<ffffffff810e8762>] ? clear_page_dirty_for_io+0x87/0x9a [ 1080.973133] [<ffffffff810efc5b>] shrink_page_list+0x39b/0x6c8 [ 1080.973139] [<ffffffff810f03bb>] shrink_inactive_list+0x22c/0x39e [ 1080.973144] [<ffffffff810822d7>] ? lock_release_holdtime.part.7+0x6b/0x72 [ 1080.973148] [<ffffffff810f0c33>] shrink_zone+0x445/0x588 [ 1080.973152] [<ffffffff810f1a11>] balance_pgdat+0x2c2/0x56b [ 1080.973170] [<ffffffff81254208>] ? __bitmap_weight+0x34/0x80 [ 1080.973175] [<ffffffff810f1f78>] kswapd+0x2be/0x2fa [ 1080.973179] [<ffffffff810726c8>] ? __init_waitqueue_head+0x4b/0x4b [ 1080.973183] [<ffffffff810f1cba>] ? balance_pgdat+0x56b/0x56b [ 1080.973187] [<ffffffff81071f69>] kthread+0xa8/0xb0 [ 1080.973200] [<ffffffff814806b4>] kernel_thread_helper+0x4/0x10 [ 1080.973205] [<ffffffff81071ec1>] ? __init_kthread_worker+0x5a/0x5a [ 1080.973210] [<ffffffff814806b0>] ? gs_change+0x13/0x13 [ 1080.973213] no locks held by kswapd0/25. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfsblock: fix NULL pointer dereferencePeng Tao
bl_add_page_to_bio returns error pointer. bio should be reset to NULL in failure cases as the out path always calls bl_submit_bio. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfs: recoalesce when ld read pagelist failsPeng Tao
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfs: recoalesce when ld write pagelist failsPeng Tao
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to mds. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfs: make _set_lo_fail genericPeng Tao
file layout and block layout both use it to set mark layout io failure bit. So make it generic. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfsblock: add missing rpc_put_mount and path_putPeng Tao
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18SUNRPC/NFS: make rpc pipe upcall genericPeng Tao
The same function is used by idmap, gss and blocklayout code. Make it generic. Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Jim Rees <rees@umich.edu> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfsblock: fix size of upcall messageJim Rees
Make the status field explicitly 32 bits. "...it's unlikely that the kernel and userspace would differ on the size of an int here, but it might be a good idea to go ahead and make that explicitly 32 bits in case we end up dealing with more exotic arches at some point in the future." Suggested-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18pnfsblock: fix return code confusionJim Rees
Always return PTR_ERR, not NULL, from nfs4_blk_get_deviceinfo and nfs4_blk_decode_device. Check for IS_ERR, not NULL, in bl_set_layoutdriver when calling nfs4_blk_get_deviceinfo. Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Benny Halevy <bhalevy@tonian.com> Cc: stable@kernel.org [3.0] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18nfs: don't try to migrate pages with active requestsJeff Layton
nfs_find_and_lock_request will take a reference to the nfs_page and will then put it if the req is already locked. It's possible though that the reference will be the last one. That put then can kick off a whole series of reference puts: nfs_page nfs_open_context dentry inode If the inode ends up being deleted, then the VFS will call truncate_inode_pages. That function will try to take the page lock, but it was already locked when migrate_page was called. The code deadlocks. Fix this by simply refusing the migration request if PagePrivate is already set, indicating that the page is already associated with an active read or write request. We've had a customer test a backported version of this patch and the preliminary results seem good. Cc: stable@kernel.org Cc: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18nfs: fix bug about IPv6 address scope checkingMi Jinlong
The result from ipv6_addr_scope() always not be a single SCOPE, so we can't use equal to compare the result with IPV6_ADDR_SCOPE_LINKLOCAL at nfs_sockaddr_match_ipaddr6. This patch fixs the problem, and lets checking address before scope_id. Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18nfs: don't redirty inode when ncommit == 0 in nfs_commit_unstable_pagesJeff Layton
commit 420e3646 allowed the kernel to reduce the number of unnecessary commit calls by skipping the commit when there are a large number of outstanding pages. However, the current test in nfs_commit_unstable_pages does not handle the edge condition properly. When ncommit == 0, then that means that the kernel doesn't need to do anything more for the inode. The current test though in the WB_SYNC_NONE case will return true, and the inode will end up being marked dirty. Once that happens the inode will never be clean until there's a WB_SYNC_ALL flush. Fix this by immediately returning from nfs_commit_unstable_pages when ncommit == 0. Mike noticed this problem initially in RHEL5 (2.6.18-based kernel) which has a backported version of 420e3646. The inode cache there was growing very large. The inode cache was unable to be shrunk since the inodes were all marked dirty. Calling sync() would essentially "fix" the problem -- the WB_SYNC_ALL flush would result in the inodes all being marked clean. What I'm not clear on is how big a problem this is in mainline kernels as the writeback code there is very different. Either way, it seems incorrect to re-mark the inode dirty in this case. Reported-by: Mike McLean <mikem@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: stable@kernel.org [2.6.34+] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18Revert "NFS: Ensure that writeback_single_inode() calls write_inode() when ↵Trond Myklebust
syncing" This reverts commit b80c3cb628f0ebc241b02e38dd028969fb8026a2. The reverted commit was rendered obsolete by a VFS fix: commit 5547e8aac6f71505d621a612de2fca0dd988b439 (writeback: Update dirty flags in two steps). We now no longer need to worry about writeback_single_inode() missing our marking the inode for COMMIT in 'do_writepages()' call. Reverting this patch, fixes a performance regression in which the inode would continuously get queued to the dirty list, causing the writeback code to unnecessarily try to send a COMMIT. Signed-off-by: Trond Myklebust <Trond.Myklebust> Tested-by: Simon Kirby <sim@hostway.ca> Cc: stable@kernel.org [2.6.35+]
2011-10-18Smack: fix: invalid length set for the result of /smack/accessJarkko Sakkinen
Forgot to update simple_transaction_set() to take terminator character into account. Signed-off-by: Jarkko Sakkinen <jarkko.j.sakkinen@gmail.com> Signed-off-by: Casey Schaufler <cschaufler@cschaufler-intel.(none)>
2011-10-18perf tui: Catch signals to exit gracefullyArnaldo Carvalho de Melo
Resetting the terminal to a sane state. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-myu44ujofadcy3y6an2mk383@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-18CIFS: fix automount for DFS sharesGerlando Falauto
Automounting directories are now invalidated by .d_revalidate() so to be d_instantiate()d again with the right DCACHE_NEED_AUTOMOUNT flag Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-18CIFS: cleanup min_t() cast in cifs_read()Dan Carpenter
Smatch complains that the cast to "int" in min_t() changes very large values of current_read_size into negative values and so min_t() could return the wrong value. I removed the const as well, as that doesn't do anything here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-18perf hists browser: Add missing hotkeys to the help windowArnaldo Carvalho de Melo
The navigation keys were missing (UP, DOWN arrows, etc). Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-3pnln0bws5v0yoqwd3f020nx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-10-18Merge tag 'v3.1-rc10' into drm-core-nextDave Airlie
There are a number of fixes in mainline required for code in -next, also there was a few conflicts I'd rather resolve myself. Signed-off-by: Dave Airlie <airlied@redhat.com> Conflicts: drivers/gpu/drm/radeon/evergreen.c drivers/gpu/drm/radeon/r600.c drivers/gpu/drm/radeon/radeon_asic.h
2011-10-18vmwgfx: information leak in vmw_execbuf_copy_fence_user()Dan Carpenter
If ret is non-zero then we don't initialize the struct which leaks stack information to user space. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18vmwgfx: memory leaks caused by double allocationDan Carpenter
These variables get allocated twice so the first allocation is a memory leak. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18vmwgfx: return -EFAULT instead of number of bytes remainingDan Carpenter
The intent here was to return an error code, but instead the code returns the number of bytes remaining (that weren't copied). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18cputimer: Cure lock inversionPeter Zijlstra
There's a lock inversion between the cputimer->lock and rq->lock; notably the two callchains involved are: update_rlimit_cpu() sighand->siglock set_process_cpu_timer() cpu_timer_sample_group() thread_group_cputimer() cputimer->lock thread_group_cputime() task_sched_runtime() ->pi_lock rq->lock scheduler_tick() rq->lock task_tick_fair() update_curr() account_group_exec() cputimer->lock Where the first one is enabling a CLOCK_PROCESS_CPUTIME_ID timer, and the second one is keeping up-to-date. This problem was introduced by e8abccb7193 ("posix-cpu-timers: Cure SMP accounting oddities"). Cure the problem by removing the cputimer->lock and rq->lock nesting, this leaves concurrent enablers doing duplicate work, but the time wasted should be on the same order otherwise wasted spinning on the lock and the greater-than assignment filter should ensure we preserve monotonicity. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/1318928713.21167.4.camel@twins Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-18drm: simplify error printing in drm_debugfs_create_filesMarcin Slusarz
There's no need to copy d_name.name. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm: fix error message about failed procfs file registrationMarcin Slusarz
It printed garbage. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP ↵Alex Deucher
bridges (v2) Settings in this table reflect the physical panel/connector rather than the internal dig encoding. v2: fix typo for DRM_MODE_CONNECTOR_VGA case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms/DCE4.1: ss is not supported on the internal ppllsAlex Deucher
It's handled via external clock. It should already be protected by the external ss flag, but add an explicit check just in case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mappingAlex Deucher
llano has fully routeable dig encoders similar to DCE3.2 while ontario has a hardcoded mapping similar to DCE4.0. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: make r600-NI blit suspend code commonAlex Deucher
r600-NI shared the same blit suspend code. Clean it up and make it a shared function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: blit code commoningIlija Hadzic
factor out most of evergreen blit code and use the refactored code from r600 that is now common for both r600 and evergreen Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18ALSA: HDA: conexant support for Lenovo T520/W520Daniel Suchy
This is patch for Conexant codec of Intel HDA driver, adding new quirk for Lenovo Thinkpad T520 and W520. Conexant autodetection works fine for T520 (similar subsystem ID is used also in W520 model) and detects more mixer features compared to generic (fallback) Lenovo quirk with hardcoded options in Conexant codec. Patch was activelly tested with Linux 3.0.4, 3.0.6 and 3.0.7 without any problems. Signed-off-by: Daniel Suchy <danny@danysek.cz> Cc: <stable@kernel.org> [3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-18drm/radeon/kms: rename a variable for consistencyIlija Hadzic
blit copy functions deal with GPU pages, not CPU pages, so rename the variables and parameters accordingly Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: cleanup r600 blit codeIlija Hadzic
reorganize the code such that only the primitives (i.e., the functions that load the CP ring) are hardware specific; dynamically link the primitives in a (new) pointer structure inside r600_blit at blit initialization time so that the functions that control the blit operations can be made common for r600 and evergreen parts Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: add more elaborate benchmarksIlija Hadzic
Lots of new (and hopefully useful) benchmark. Load the driver with radeon_benchmark=<test_number> and enjoy. Among tests added are VRAM to VRAM blits and blits with buffer size sweeps. The latter can be from GTT to VRAM, VRAM to GTT, and VRAM to VRAM and there are two types of sweeps: powers of two and (probably more interesting) buffers sizes that correspond to common modes. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: cleanup benchmark codeIlija Hadzic
factor out repeated code into functions fix units in which the throughput is reported (megabytes per second and megabits per second make sense, others are kind of confusing) make report more amenable to awk and friends (e.g. whitespace is always the separator, unit is separated from the number, etc) add #defines for some hard coded constants besides "beautification" this reorg is done in preparation for writing more elaborate benchmarks Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: demystify r600 blit codeIlija Hadzic
some 3d register bits look like magic in r600 blit functions use predefined constants to make it more intuitive what they are Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: demystify evergreen blit codeIlija Hadzic
some bits in 3D registers used by blit functions look like magic and this is hard to follow; change them to a little bit more meaningful pre-defined constants Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: simplify r6xx blit codeAlex Deucher
Covert 4k pages to multiples of 64x64x4 tiles. This is also more efficient than a scanline based approach from the MC's perspective. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: simplify evergreen blit codeIlija Hadzic
Covert 4k pages to multiples of 64x64x4 tiles. This is also more efficient than a scanline based approach from the MC's perspective. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms: Simplify I2C post_xfer functionJean Delvare
There is no point in re-doing in post_xfer all the initialization that was already done by pre_xfer. Instead, only do the work which differs from pre_xfer. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/exynos: fixed build warnings and comments.Inki Dae
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/exynos: fixed page flip bug.Inki Dae
in case of using two drivers such as fimd and hdmi controller that they have their own hardware interrupt, drm framework doesn't provide pipe number corresponding to it. so the pipe should be set to event's from specific crtc. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 04:39:40 +0000