| Age | Commit message (Collapse) | Author |
|---|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250611104348.192092-15-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document support for the GBETH IP found on the Renesas RZ/G3E (R9A09G047) SoC.
The GBETH block on RZ/G3E is equivalent in functionality to the GBETH found on
RZ/V2H(P) (R9A09G057).
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250611061204.15393-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of
gpiod_set_array_value_cansleep().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250611-net-mdio-mux-gpio-use-gpiod_multi_set_value_cansleep-v1-1-6eb5281f1b41@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Florian Fainelli says:
====================
net: bcmasp: add support for GRO
These two patches add support for GRO software interrupt coalescing,
kudos to Zak for doing this on bcmgenet first.
before:
00:03:31 CPU %usr %nice %sys %iowait %irq %soft %steal
%guest %idle
00:03:32 all 0.00 0.00 1.51 0.00 0.50 7.29 0.00 0.00 90.70
after:
00:02:35 CPU %usr %nice %sys %iowait %irq %soft %steal
%guest %idle
00:02:36 all 0.25 0.00 1.26 0.00 0.50 7.29 0.00 0.00 90.70
====================
Link: https://patch.msgid.link/20250611212730.252342-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Utilize netdev_sw_irq_coalesce_default_on() to provide conservative
default settings for GRO software interrupt coalescing.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611212730.252342-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make use of the return value from napi_complete_done(). This allows
users to use the gro_flush_timeout and napi_defer_hard_irqs sysfs
attributes for configuring software interrupt coalescing.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611212730.252342-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No driver should spam the kernel log when merely being loaded.
The message in hclge_init() is clearly a debug message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/c2ac6f20f85056e7b35bd56d424040f996d32109.1749657070.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the arguments passed to phy_get_internal_delay() - the "dev"
argument is always &phydev->mdio.dev, and as the phydev is passed in,
there's no need to also pass in the struct device, especially when this
function is the only reason for the caller to have a local "dev"
variable.
Remove the redundant "dev" argument, and update the callers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPLwB-003VzR-4C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_read_status() is exported, so we can move definition of
genphy_c45_driver to phy_device.c and make it static. This helps
to clean up phy.h a little.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ead3ab17-22d0-4cd3-901c-3d493ab851e6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hash based multicast filtering is an optional feature. Currently,
driver overrides the value of multicast_filter_bins based on the hash
table size. If the feature is not supported, hash table size reads 0
however the value of multicast_filter_bins remains set to default
HASH_TABLE_SIZE which is incorrect. Let's extend the use of the property
snps,multicast-filter-bins to xgmac so it can be set to 0 via devicetree
to indicate multicast filtering is not supported.
Signed-off-by: Nikunj Kela <nikunj.kela@sima.ai>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250610200411.3751943-1-nikunj.kela@sima.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't
need to be null terminated while its size occupies the full size
of the field. Fix the buffer overflow issue by adding one
additional byte for null terminator.
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250610193338.1368-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Spelling fix:
conneciton --> connection
This is a non-functional change aimed at improving code clarity.
Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
Link: https://patch.msgid.link/20250610071903.67180-1-ankitchauhan2065@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make mdio_device_bus_match() the default match function for non-PHY
MDIO devices. Benefit is that we don't have to export this function
any longer. As long as mdiodev->modalias isn't set, there's no change
in behavior. mdiobus_create_device() is the only place where
mdiodev->modalias gets set, but this function sets
mdio_device_bus_match() as match function anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/6c94e3d3-bfb0-4ddc-a518-6fddbc64e1d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some stress/negative firmware testing around devcmd(s) returning
EAGAIN found that the done bit could get out of sync in the
firmware when it wasn't cleared in a retry case.
While here, change the type of the local done variable to a bool
to match the return type from ionic_dev_cmd_done().
Fixes: ec8ee714736e ("ionic: stretch heartbeat detection")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250609212827.53842-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix regression disallowing 64K SVM migration (Maarten)
- Use a bounce buffer for WA BB (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aEsBQoh5Si3ouPgE@fedora
|
|
Jakub Kicinski says:
====================
net: ethtool: add dedicated RXFH driver callbacks
Andrew asked me to plumb the RXFH header fields configuration
thru to netlink. Before we do that we need to clean up the driver
facing API a little bit. Right now RXFH configuration shares the
callbacks with n-tuple filters. The future of n-tuple filters
is uncertain within netlink. Separate the two for clarity both
of the core code and the driver facing API.
This series adds the new callbacks and converts the initial
handful of drivers. There is 31 more driver patches to come,
then we can stop calling rxnfc in the core for rxfh.
====================
Link: https://patch.msgid.link/20250611145949.2674086-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the new rxfh_fields callbacks, instead of de-muxing
the rxnfc calls. This driver does not support flow filtering so
the set_rxnfc callback is completely removed.
Link: https://patch.msgid.link/20250611145949.2674086-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the new rxfh_fields callbacks, instead of de-muxing
the rxnfc calls. This driver does not support flow filtering so
the set_rxnfc callback is completely removed.
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250611145949.2674086-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While investigating some reports of memory-constrained NUMA machines
failing to mount v3 and v4.0 nfs mounts, we found that svc_init_buffer()
was not attempting to retry allocations from the bulk page allocator.
Typically, this results in a single page allocation being returned and
the mount attempt fails with -ENOMEM. A retry would have allowed the mount
to succeed.
Additionally, it seems that the bulk allocation in svc_init_buffer() is
redundant because svc_alloc_arg() will perform the required allocation and
does the correct thing to retry the allocations.
The call to allocate memory in svc_alloc_arg() drops the preferred node
argument, but I expect we'll still allocate on the preferred node because
the allocation call happens within the svc thread context, which chooses
the node with memory closest to the current thread's execution.
This patch cleans out the bulk allocation in svc_init_buffer() to allow
svc_alloc_arg() to handle the allocation/retry logic for rq_pages.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: ed603bcf4fea ("sunrpc: Replace the rq_pages array with dynamically-allocated memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The new code neglects to remove a freshly-allocated RCL from the
callback's referring call list when no matching referring call is
found.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505171002.cE46sdj5-lkp@intel.com/
Fixes: 4f3c8d8c9e10 ("NFSD: Implement CB_SEQUENCE referring call lists")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add support for the new rxfh_fields callbacks, instead of de-muxing
the rxnfc calls. This driver does not support flow filtering so
the set_rxnfc callback is completely removed.
Link: https://patch.msgid.link/20250611145949.2674086-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the new rxfh_fields callbacks, instead of de-muxing
the rxnfc calls. The code is moved as we try to declare the functions
in the order ing which they appear in the ops struct.
Link: https://patch.msgid.link/20250611145949.2674086-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're migrating RXFH config to new callbacks.
Remove RXFH handling from drivers where it does nothing.
Reviewed-by: Ziwei Xiao <ziweixiao@google.com>
Link: https://patch.msgid.link/20250611145949.2674086-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We mux multiple calls to the drivers via the .get_nfc and .set_nfc
callbacks. This is slightly inconvenient to the drivers as they
have to de-mux them back. It will also be awkward for netlink code
to construct struct ethtool_rxnfc when it wants to get info about
RX Flow Hash, from the RSS module.
Add dedicated driver callbacks. Create struct ethtool_rxfh_fields
which contains only data relevant to RXFH. Maintain the names of
the fields to avoid having to heavily modify the drivers.
For now support both callbacks, once all drivers are converted
ethtool_*et_rxfh_fields() will stop using the rxnfc callbacks.
Link: https://patch.msgid.link/20250611145949.2674086-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RX Flow Hashing supports using different configuration for different
RSS contexts. Only two drivers seem to support it. Make sure we
uniformly error out for drivers which don't.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the handles have been separated - remove the RX Flow Hash
handling from rxnfc functions and vice versa.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RX Flow Hash configuration uses the same argument structure
as flow filters. This is probably why ethtool IOCTL handles
them together. The more checks we add the more convoluted
this code is getting (as some of the checks apply only
to flow filters and others only to the hashing).
Copy the code to separate the handling. This is an exact
copy, the next change will remove unnecessary handling.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I must have lost this rebasing things during the merge window, I know I
got it at some point but it's not here now. Without this I get warnings
along the lines of
include/linux/fs.h:3975:15: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
3975 | if (unlikely(get_user(c, path)))
| ^
arch/riscv/include/asm/uaccess.h:274:3: note: expanded from macro 'get_user'
274 | __get_user((x), __p) : \
| ^
arch/riscv/include/asm/uaccess.h:244:2: note: expanded from macro '__get_user'
244 | __get_user_error(__gu_val, __gu_ptr, __gu_err); \
| ^
arch/riscv/include/asm/uaccess.h:207:2: note: expanded from macro '__get_user_error'
207 | __ge LD [M] net/802/psnap.ko
t_user_nocheck(x, ptr, __gu_failed); \
| ^
arch/riscv/include/asm/uaccess.h:196:3: note: expanded from macro '__get_user_nocheck'
196 | __get_user_8((x), __gu_ptr, label); \
| ^
arch/riscv/include/asm/uaccess.h:130:2: note: expanded from macro '__get_user_8'
130 | u32 __user *__ptr = (u32 __user *)(ptr); \
| ^
Link: https://lore.kernel.org/r/20250610213058.24852-1-palmer@dabbelt.com
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Fixes: f6bff7827a48 ("riscv: uaccess: use 'asm_goto_output' for get_user()")
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"
* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
|
|
This is a fix in the middle of a feature set, so I'm going to take the
fix onto fixes on its own.
* b4-shazam-merge:
raid6: riscv: Fix NULL pointer dereference issue
Link: https://lore.kernel.org/r/20250610101234.1100660-1-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
When running the raid6 user-space test program on RISC-V QEMU, there's a
segmentation fault which seems caused by accessing a NULL pointer,
which is the pointer variable p/q in raid6_rvv*_gen/xor_syndrome_real(),
p/q should have been equal to dptr[x], but when I use GDB command to
see its value, which was 0x10 like below:
"
Program received signal SIGSEGV, Segmentation fault.
0x0000000000011062 in raid6_rvv2_xor_syndrome_real (disks=<optimized out>, start=0, stop=<optimized out>, bytes=4096, ptrs=<optimized out>) at rvv.c:386
(gdb) p p
$1 = (u8 *) 0x10 <error: Cannot access memory at address 0x10>
"
The issue was found to be related with:
1) Compile optimization
There's no segmentation fault if compiling the raid6test program with
the optimization flag -O0.
2) The RISC-V vector command vsetvli
If not used t0 as the first parameter in vsetvli, there's no
segmentation fault either.
This patch selects the 2nd solution to fix the issue.
[Palmer: The actual issue here is a missing clobber in the vsetvli code.
It's a little tricky: we've already probed for VLENB so we don't need to
look at the output register, we just need to have an X register in the
instruction as that's the form required to actually set VL. Thus we
clobber a register, and without describing that we end up breaking
compilers.]
Fixes: 6093faaf9593 ("raid6: Add RISC-V SIMD syndrome and recovery calculations")
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610101234.1100660-3-zhangchunyan@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into fixes
riscv fixes for 6.16-rc1
- A fix for the newly introduced getrandom vdso where clang optimizes
away a register variable which is both an input and an output
parameter
- A fix for theadvector where we did not save all the vector registers,
only a few of them
* tag 'riscv-fixes-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
RISC-V: vDSO: Correct inline assembly constraints in the getrandom syscall wrapper
riscv: vector: Fix context save/restore with xtheadvector
|
|
wrapper
As recently pointed out by Thomas, if a register is forced for two
different register variables, among them one is used as "+" (both input
and output) and another is only used as input, Clang would treat the
conflicting input parameters as undefined behaviour and optimize away
the argument assignment.
Instead use "=r" (only output) for the output parameter and "r" (only
input) for the input parameter.
While the example from the GCC documentation uses "0" for the input
parameter, this is not necessary as confirmed by the GCC developers and "r"
matches what the other architectures' vDSO implementations are using.
[ alex: Update log to match v2 (Thomas) ]
Link: https://lore.kernel.org/all/20250603-loongarch-vdso-syscall-v1-1-6d12d6dfbdd0@linutronix.de/
Link: https://gcc.gnu.org/onlinedocs/gcc-15.1.0/gcc/Local-Register-Variables.html
Link: https://gcc.gnu.org/pipermail/gcc-help/2025-June/144266.html
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Fixes: ee0d03053e70 ("RISC-V: vDSO: Wire up getrandom() vDSO")
Link: https://lore.kernel.org/r/20250606092443.73650-2-xry111@xry111.site
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Previously only v0-v7 were correctly saved/restored,
and the context of v8-v31 are damanged.
Correctly save/restore v8-v31 to avoid breaking userspace.
Fixes: d863910eabaf ("riscv: vector: Support xtheadvector save/restore")
Cc: stable@vger.kernel.org
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Tested-by: Xiongchuan Tan <tanxiongchuan@isrc.iscas.ac.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/9b9eb2337f3d5336ce813721f8ebea51e0b2b553.1747994822.git.rabenda.cn@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Customer reported that one of their applications started failing to
open files with STATUS_INSUFFICIENT_RESOURCES due to NetApp server
hitting the maximum number of opens to same file that it would allow
for a single client connection.
It turned out the client was failing to reuse open handles with
deferred closes because matching ->f_flags directly without masking
off O_CREAT|O_EXCL|O_TRUNC bits first broke the comparision and then
client ended up with thousands of deferred closes to same file. Those
bits are already satisfied on the original open, so no need to check
them against existing open handles.
Reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#define NR_THREADS 4
#define NR_ITERATIONS 2500
#define TEST_FILE "/mnt/1/test/dir/foo"
static char buf[64];
static void *worker(void *arg)
{
int i, j;
int fd;
for (i = 0; i < NR_ITERATIONS; i++) {
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_APPEND, 0666);
for (j = 0; j < 16; j++)
write(fd, buf, sizeof(buf));
close(fd);
}
}
int main(int argc, char *argv[])
{
pthread_t t[NR_THREADS];
int fd;
int i;
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0666);
close(fd);
memset(buf, 'a', sizeof(buf));
for (i = 0; i < NR_THREADS; i++)
pthread_create(&t[i], NULL, worker, NULL);
for (i = 0; i < NR_THREADS; i++)
pthread_join(t[i], NULL);
return 0;
}
Before patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1391
After patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: Pierguido Lambri <plambri@redhat.com>
Fixes: b8ea3b1ff544 ("smb: enable reuse of deferred file handles for write operations")
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth().
Call Trace:
[ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550
[ 97.285732]
[ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11
[ 97.287032] Hardware name: linux,dummy-virt (DT)
[ 97.287815] Call trace:
[ 97.288279] dump_backtrace+0xa0/0x128
[ 97.288946] show_stack+0x20/0x38
[ 97.289551] dump_stack_lvl+0x78/0xc8
[ 97.290203] print_address_description.constprop.0+0x84/0x3c8
[ 97.291159] print_report+0xb0/0x280
[ 97.291792] kasan_report+0x84/0xd0
[ 97.292421] __asan_load8+0x9c/0xc0
[ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.293835] process_fetch_insn+0x770/0xa30
[ 97.294562] kprobe_trace_func+0x254/0x3b0
[ 97.295271] kprobe_dispatcher+0x98/0xe0
[ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210
[ 97.296774] call_break_hook+0xc4/0x100
[ 97.297451] brk_handler+0x24/0x78
[ 97.298073] do_debug_exception+0xac/0x178
[ 97.298785] el1_dbg+0x70/0x90
[ 97.299344] el1h_64_sync_handler+0xcc/0xe8
[ 97.300066] el1h_64_sync+0x78/0x80
[ 97.300699] kernel_clone+0x0/0x500
[ 97.301331] __arm64_sys_clone+0x70/0x90
[ 97.302084] invoke_syscall+0x68/0x198
[ 97.302746] el0_svc_common.constprop.0+0x11c/0x150
[ 97.303569] do_el0_svc+0x38/0x50
[ 97.304164] el0_svc+0x44/0x1d8
[ 97.304749] el0t_64_sync_handler+0x100/0x130
[ 97.305500] el0t_64_sync+0x188/0x190
[ 97.306151]
[ 97.306475] The buggy address belongs to stack of task 1.sh/2550
[ 97.307461] and is located at offset 0 in frame:
[ 97.308257] __se_sys_clone+0x0/0x138
[ 97.308910]
[ 97.309241] This frame has 1 object:
[ 97.309873] [48, 184) 'args'
[ 97.309876]
[ 97.310749] The buggy address belongs to the virtual mapping at
[ 97.310749] [ffff800089270000, ffff800089279000) created by:
[ 97.310749] dup_task_struct+0xc0/0x2e8
[ 97.313347]
[ 97.313674] The buggy address belongs to the physical page:
[ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a
[ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff)
[ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000
[ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 97.319445] page dumped because: kasan: bad access detected
[ 97.320371]
[ 97.320694] Memory state around the buggy address:
[ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00
[ 97.325023] ^
[ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:
commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.
Fixes: 0a8ea52c3eb1 ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Link: https://lore.kernel.org/r/20250604005533.1278992-1-wutengda@huaweicloud.com
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we call gcs_free() during flush_gcs() to reset the thread
state for GCS. This includes unmapping any kernel allocated GCS, but
this is redundant when doing a flush_thread() since we are
reinitialising the thread memory too. Inline the reinitialisation of the
thread struct.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250611-arm64-gcs-flush-thread-v1-1-cc26feeddabd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In case the BO is in iomem, we can't simply take the vaddr and write to
it. Instead, prepare a separate buffer that is later copied into io
memory. Right now it's just a few words that could be using
xe_map_write32(), but the intention is to grow the WA BB for other
uses.
Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization")
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250604-wa-bb-fix-v1-1-0dfc5dafcef0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit ef48715b2d3df17c060e23b9aa636af3d95652f8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Add some missing pins on the Qualcomm QCM2290, along with a managed
resources patch that make it clean and nice
- Drop an unused function in the ST Micro driver
- Drop bouncing MAINTAINER entry
- Drop of_match_ptr() macro to rid compile warnings in the TB10x
driver
- Fix up calculation of pin numbers from base in the Sunxi driver
* tag 'pinctrl-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: dt: Consider pin base when calculating bank number from pin
pinctrl: tb10x: Drop of_match_ptr for ID table
pinctrl: MAINTAINERS: Drop bouncing Jianlong Huang
pinctrl: st: Drop unused st_gpio_bank() function
pinctrl: qcom: pinctrl-qcm2290: Add missing pins
pinctrl: qcom: switch to devm_gpiochip_add_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- arch_atomic64_cmpxchg relaxed variant [Jason]
- use of inbuilt swap in stack unwinder [Yu-Chun Lin]
- use of __ASSEMBLER__ in kernel headers [Thomas Huth]
* tag 'arc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headers
ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
ARC: unwind: Use built-in sort swap to reduce code size and improve performance
ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxed
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another quick round of updates:
- revert mwifiex HT40 that was causing issues
- many ath10k/ath11k/ath12k fixes
- re-add some iwlwifi code I lost in a merge
- use kfree_sensitive() on an error path in cfg80211
* tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: use kfree_sensitive() for connkeys cleanup
wifi: iwlwifi: fix merge damage related to iwl_pci_resume
Revert "wifi: mwifiex: Fix HT40 bandwidth issue."
wifi: ath12k: fix uaf in ath12k_core_init()
wifi: ath12k: Fix hal_reo_cmd_status kernel-doc
wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
wifi: ath11k: consistently use ath11k_mac_get_fw_stats()
wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()
wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()
wifi: ath11k: move some firmware stats related functions outside of debugfs
wifi: ath11k: don't wait when there is no vdev started
wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
wil6210: fix support for sparrow chipsets
wifi: ath10k: Avoid vdev delete timeout when firmware is already down
ath10k: snoc: fix unbalanced IRQ enable in crash recovery
====================
Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal Pressman says:
====================
Fix ntuple rules targeting default RSS
This series addresses a regression in ethtool flow steering where rules
targeting the default RSS context (context 0) were incorrectly rejected.
The default RSS context always exists but is not stored in the rss_ctx
xarray like additional contexts. The current validation logic was
checking for the existence of context 0 in this array, causing valid
flow steering rules to be rejected.
This prevented configurations such as:
- High priority rules directing specific traffic to the default context
- Low priority catch-all rules directing remaining traffic to additional
contexts
Patch 1 fixes the validation logic to skip the existence check for
context 0.
Patch 2 adds a selftest that verifies this behavior.
v3: https://lore.kernel.org/20250609120250.1630125-1-gal@nvidia.com
v2: https://lore.kernel.org/20250225071348.509432-1-gal@nvidia.com
====================
Link: https://patch.msgid.link/20250612071958.1696361-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
context
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Context 0 (default context) always exists, there is no need to check
whether it exists or not when adding a flow steering rule.
The existing check fails when creating a flow steering rule for context
0 as it is not stored in the rss_ctx xarray.
For example:
$ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
An example usecase for this could be:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This is a user-visible regression that was caught in our testing
environment, it was not reported by a user yet.
Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix sparse errors
Bluetooth: ISO: Fix not using bc_sid as advertisement SID
Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================
Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before the cited commit, the kernel unconditionally embedded SCM
credentials to skb for embryo sockets even when both the sender
and listener disabled SO_PASSCRED and SO_PASSPIDFD.
Now, the credentials are added to skb only when configured by the
sender or the listener.
However, as reported in the link below, it caused a regression for
some programs that assume credentials are included in every skb,
but sometimes not now.
The only problematic scenario would be that a socket starts listening
before setting the option. Then, there will be 2 types of non-small
race window, where a client can send skb without credentials, which
the peer receives as an "invalid" message (and aborts the connection
it seems ?):
Client Server
------ ------
s1.listen() <-- No SO_PASS{CRED,PIDFD}
s2.connect()
s2.send() <-- w/o cred
s1.setsockopt(SO_PASS{CRED,PIDFD})
s2.send() <-- w/ cred
or
Client Server
------ ------
s1.listen() <-- No SO_PASS{CRED,PIDFD}
s2.connect()
s2.send() <-- w/o cred
s3, _ = s1.accept() <-- Inherit cred options
s2.send() <-- w/o cred but not set yet
s3.setsockopt(SO_PASS{CRED,PIDFD})
s2.send() <-- w/ cred
It's unfortunate that buggy programs depend on the behaviour,
but let's restore the previous behaviour.
Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().")
Reported-by: Jacek Łuczak <difrost.kernel@gmail.com>
Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Jacek Łuczak <difrost.kernel@gmail.com>
Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller created an IPv6 route from a malformed packet, which has
a prefix len > 128, triggering the splat below. [0]
This is a similar issue fixed by commit 586ceac9acb7 ("ipv6: Restore
fib6_config validation for SIOCADDRT.").
The cited commit removed fib6_config validation from some callers
of ip6_add_route().
Let's move the validation back to ip6_route_add() and
ip6_route_multipath_add().
[0]:
UBSAN: array-index-out-of-bounds in ./include/net/ipv6.h:616:34
index 20 is out of range for type '__u8 [16]'
CPU: 1 UID: 0 PID: 7444 Comm: syz.0.708 Not tainted 6.16.0-rc1-syzkaller-g19272b37aa4f #0 PREEMPT
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80078a80>] dump_backtrace+0x2e/0x3c arch/riscv/kernel/stacktrace.c:132
[<ffffffff8000327a>] show_stack+0x30/0x3c arch/riscv/kernel/stacktrace.c:138
[<ffffffff80061012>] __dump_stack lib/dump_stack.c:94 [inline]
[<ffffffff80061012>] dump_stack_lvl+0x12e/0x1a6 lib/dump_stack.c:120
[<ffffffff800610a6>] dump_stack+0x1c/0x24 lib/dump_stack.c:129
[<ffffffff8001c0ea>] ubsan_epilogue+0x14/0x46 lib/ubsan.c:233
[<ffffffff819ba290>] __ubsan_handle_out_of_bounds+0xf6/0xf8 lib/ubsan.c:455
[<ffffffff85b363a4>] ipv6_addr_prefix include/net/ipv6.h:616 [inline]
[<ffffffff85b363a4>] ip6_route_info_create+0x8f8/0x96e net/ipv6/route.c:3793
[<ffffffff85b635da>] ip6_route_add+0x2a/0x1aa net/ipv6/route.c:3889
[<ffffffff85b02e08>] addrconf_prefix_route+0x2c4/0x4e8 net/ipv6/addrconf.c:2487
[<ffffffff85b23bb2>] addrconf_prefix_rcv+0x1720/0x1e62 net/ipv6/addrconf.c:2878
[<ffffffff85b92664>] ndisc_router_discovery+0x1a06/0x3504 net/ipv6/ndisc.c:1570
[<ffffffff85b99038>] ndisc_rcv+0x500/0x600 net/ipv6/ndisc.c:1874
[<ffffffff85bc2c18>] icmpv6_rcv+0x145e/0x1e0a net/ipv6/icmp.c:988
[<ffffffff85af6798>] ip6_protocol_deliver_rcu+0x18a/0x1976 net/ipv6/ip6_input.c:436
[<ffffffff85af8078>] ip6_input_finish+0xf4/0x174 net/ipv6/ip6_input.c:480
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af8262>] ip6_input+0x16a/0x70c net/ipv6/ip6_input.c:491
[<ffffffff85af8dcc>] ip6_mc_input+0x5c8/0x1268 net/ipv6/ip6_input.c:588
[<ffffffff85af6112>] dst_input include/net/dst.h:469 [inline]
[<ffffffff85af6112>] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af6112>] ipv6_rcv+0x5ae/0x6e0 net/ipv6/ip6_input.c:309
[<ffffffff85087e84>] __netif_receive_skb_one_core+0x106/0x16e net/core/dev.c:5977
[<ffffffff85088104>] __netif_receive_skb+0x2c/0x144 net/core/dev.c:6090
[<ffffffff850883c6>] netif_receive_skb_internal net/core/dev.c:6176 [inline]
[<ffffffff850883c6>] netif_receive_skb+0x1aa/0xbf2 net/core/dev.c:6235
[<ffffffff8328656e>] tun_rx_batched.isra.0+0x430/0x686 drivers/net/tun.c:1485
[<ffffffff8329ed3a>] tun_get_user+0x2952/0x3d6c drivers/net/tun.c:1938
[<ffffffff832a21e0>] tun_chr_write_iter+0xc4/0x21c drivers/net/tun.c:1984
[<ffffffff80b9b9ae>] new_sync_write fs/read_write.c:593 [inline]
[<ffffffff80b9b9ae>] vfs_write+0x56c/0xa9a fs/read_write.c:686
[<ffffffff80b9c2be>] ksys_write+0x126/0x228 fs/read_write.c:738
[<ffffffff80b9c42e>] __do_sys_write fs/read_write.c:749 [inline]
[<ffffffff80b9c42e>] __se_sys_write fs/read_write.c:746 [inline]
[<ffffffff80b9c42e>] __riscv_sys_write+0x6e/0x94 fs/read_write.c:746
[<ffffffff80076912>] syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
[<ffffffff8637e31e>] do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
[<ffffffff863a69e2>] handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197
Fixes: fa76c1674f2e ("ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config().")
Reported-by: syzbot+4c2358694722d304c44e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6849b8c3.a00a0220.1eb5f5.00f0.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611193551.2999991-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
