summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-12mt76: mt7622: fix DMA unmap lengthLorenzo Bianconi
Fix DMA unmap length estimation in mt7615_txp_skb_unmap_hw for mt7622 chipset Fixes: 6aa4ed7927f1 ("mt76: mt7615: implement DMA support for MT7622") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2020-05-12mt76: mt7615: set hw scan limits only for firmware with offload supportFelix Fietkau
They do not apply to software scan Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: disable hw/sched scan ops for non-offload firmwareFelix Fietkau
Avoid having to attempt hw scan and fall back to software for every scan on devices/firmware without hw scan support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: fix aggr range entry in debugfsLorenzo Bianconi
Fix register definitions for aggr range counter registers for mt7663 chipset Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: fix possible division by 0 in mt7615_mac_update_mib_statsLorenzo Bianconi
Check that val is not zero before aggr_per estimation in order to avoid a possible division by 0 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x2: disable merge of OTP ROM data by defaultFelix Fietkau
The reference driver does not seem to enable it by default, only under certain conditions, e.g. when a .bin file is loaded. Make it opt-in via a device tree property for now, in case it is needed on some boards. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7603: disable merge of OTP ROM data by defaultFelix Fietkau
The reference driver does not seem to enable it by default, only under certain conditions, e.g. when a .bin file is loaded. Make it opt-in via a device tree property for now, in case it is needed on some boards. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add support for applying tx DPD calibration from EEPROMFelix Fietkau
When the EEPROM data is read from flash, it can contain tx DPD calibration data. Add support for sending the data to the firmware. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add support for applying DC offset calibration from EEPROMFelix Fietkau
When the EEPROM data is read from flash, it can contain DC offset calibration data. Add support for sending the data to the firmware. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: disable merge of OTP ROM data by defaultFelix Fietkau
The reference driver does not seem to enable it by default, only under certain conditions, e.g. when a .bin file is loaded. Make it opt-in via a device tree property for now, in case it is needed on some boards. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12dt-bindings: net: wireless: mt76: document mediatek,eeprom-merge-otp propertyFelix Fietkau
It is used to enable merging of Flash EEPROM data with OTP ROM calibration. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: Delete an error message in mt7622_wmac_probe()Markus Elfring
The function “platform_get_irq” can log an error already. Thus omit a redundant message for the exception handling in the calling function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: do not always reset the dfs state setting the channelLorenzo Bianconi
mac80211/hostapd runs mt7615_set_channel with the same channel parameters sending multiple rdd commands overwriting the previous ones. This behaviour is causing tpt issues on dfs channels. Fix the issue checking new channel freq/width with the running one. Fixes: 5dabdf71e94e ("mt76: mt7615: add multiple wiphy support to the dfs support code") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: correct the name of the rom patchSean Wang
Rom patch is shared between Bluetooth and Wifi devices, so correct the naming to allow two drivers to share the same file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add address parameter to mt7615_eeprom_initLorenzo Bianconi
Introduce address parameter to mt7615_eeprom_init routine in order to be reused adding usb support to mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce mt7615_wtbl_desc data structureLorenzo Bianconi
Generalize mt7615_rate_desc introducing mt7615_wtbl_desc and mt7615_key_desc data structures in order to configure the hw wtbl in a non-atomic context for usb devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: rework wtbl key configurationLorenzo Bianconi
Remove key dependency from mt7615_mac_wtbl_update_key and export mt7615_mac_wtbl_update_key, mt7615_mac_wtbl_update_pk and mt7615_mac_wtbl_update_cipher in order to reuse them in usb code. Move mt7615_mac_get_cipher in mac.h Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76u: rely on mt7622 queue scheme for mt7663uLorenzo Bianconi
Rely on the mt7622 endpoint definitions for mt7663u Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: move mt7615_mac_wtbl_addr in mac.hLorenzo Bianconi
Move mt7615_mac_wtbl_addr in mac.h and add inline qualifier in order to be reused adding usb support to mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce __mt7663_load_firmware routineLorenzo Bianconi
Introduce __mt7663_load_firmware routine to load firmware for usb devices. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce mt7615_mac_update_rate_desc routineLorenzo Bianconi
Move register configuration out of mt7615_mac_set_rates since usb driver can't access device register in interrupt context. Introduce mt7615_mac_update_rate_desc routine to report rate info to mt7615_mac_set_rates Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce mt7663u support to mt7615_write_txwiLorenzo Bianconi
Extend mt7615_write_txwi routine to support usb txwi configuration Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add headroom and tailroom to mt76_mcu_ops data structureLorenzo Bianconi
Introduce headroom and tailroom to mt76_mcu_ops data structure in order to unify the routine used for mcu message allocation. This is a preliminary patch to add mt7663u support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: remove unnecessary register operationsSean Wang
Remove mt76_wr(dev, MT_CSR(0x010), 0x8208) that would cause MT_PCIE_IRQ_ENABLE to be disabled; MT_PCIE_IRQ_ENABLE should always keep on enabled when the driver is running. 0x44064 is a not existing address Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce rlm tlv in bss_info mcu commandLorenzo Bianconi
Introduce rlm tlv header in bss_info mcu command in order to inform the mcu about operating channel. Rlm header is necessary only if the mcu is running low power functionalities (e.g offloaded scan) Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce BSS absence eventSean Wang
Introduce BSS absence event that is reported when the fw is leaving or entering current operational channel. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce scheduled scan supportLorenzo Bianconi
Introduce scheduled scan support for mt7663e devices Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce hw scan supportLorenzo Bianconi
Introduce hw scan support to mt7663e driver Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: keep Rx filters as the defaultSean Wang
Keep Rx filters default value if the firmware supports offload and low power features. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: introduce mt7615_mcu_set_channel_domain mcu commandLorenzo Bianconi
Introduce mt7615_mcu_set_channel_domain routines in order to instruct the mcu about supported band/channels. This is a preliminary patch to add hw scan support to mt7663e driver Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add ethool support to mt7663 driverLorenzo Bianconi
Report n9 firmware version using ethtool Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: disable RDD commandsLorenzo Bianconi
Disable dfs RDD mcu commands for mt7663 driver since they are not currently supported by the 7663 firmware Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: make scs configurable per phyLorenzo Bianconi
Make scs configurable per phy since most of the chipsets do not support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: enable nf estimationLorenzo Bianconi
Enable Noise floor estimation for mt7663 driver Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7663: fix mt7615_mac_cca_stats_reset routineLorenzo Bianconi
Fix PHYMUX_5 register definition for mt7663 in mt7615_mac_cca_stats_reset routine Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: add more useful Tx mib countersRyder Lee
Add ba_miss_cnt and ampdu_per in mib_stats. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: cleanup mib related defines and structsRyder Lee
Simplify mib macros and use proper type for related counters. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: enable aggr_stats for both phyRyder Lee
Use bottom half of aggr_stats for second phy. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7615: modify mt7615_ampdu_stat_read for each phyRyder Lee
This is a preliminary patch to add more Tx counters. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x0: pci: add mt7610 PCI IDPawel Dembicki
Add mt7610 PCI id found on D-Link DWR-960 to pci_device_id table. Run-tested on D-Link DWR-960 with no-name half-size mPCIE card with mt7610e. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x2u: introduce Mercury UD13 supportLorenzo Bianconi
Introduce Mercury UD13 dual-band dongle support to mt76x2u driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02u: Add support for newer versions of the XBox One wifi adapterMatthew Garrett
The current version has a new USB ID and reports as an 0x7632 device. Adding the IDs results in it working out of the box. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12Merge tag 'gpio-v5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes for v5.7, slightly overdue. Been learning MMUs and KASan that is why it's late. Bartosz helped me out, luckily! - Fix pin configuration in the PCA953x driver - Ruggedize the watch/unwatch ioctl() - Possible call to a sleeping function when holding a spinlock, avoid this - Fix UML builds with DT overlays - Mask Tegra GPIO IRQs during shutdown()" * tag 'gpio-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: mask GPIO IRQs during IRQ shutdown gpio: of: Build fails if CONFIG_OF_DYNAMIC enabled without CONFIG_OF_GPIO gpiolib: don't call sleeping functions with a spinlock taken gpiolib: improve the robustness of watch/unwatch ioctl() gpio: pca953x: Fix pca953x_gpio_set_config
2020-05-12Merge tag 'gfs2-v5.7-rc1.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "Various gfs2 fixes. Fixes for bugs prior to v5.7: - Fix random block reads when reading fragmented journals (v5.2) - Fix a possible random memory access in gfs2_walk_metadata (v5.3) Fixes for v5.7: - Fix several overlooked gfs2_qa_get / gfs2_qa_put imbalances - Fix several bugs in the new filesystem withdraw logic" * tag 'gfs2-v5.7-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: Revert "gfs2: Don't demote a glock until its revokes are written" gfs2: If go_sync returns error, withdraw but skip invalidate gfs2: Grab glock reference sooner in gfs2_add_revoke gfs2: don't call quota_unhold if quotas are not locked gfs2: move privileged user check to gfs2_quota_lock_check gfs2: remove check for quotas on in gfs2_quota_check gfs2: Change BUG_ON to an assert_withdraw in gfs2_quota_change gfs2: Fix problems regarding gfs2_qa_get and _put gfs2: More gfs2_find_jhead fixes gfs2: Another gfs2_walk_metadata fix gfs2: Fix use-after-free in gfs2_logd after withdraw gfs2: Fix BUG during unmount after file system withdraw gfs2: Fix error exit in do_xmote gfs2: fix withdraw sequence deadlock
2020-05-12nvme-pci: dma read memory barrier for completionsKeith Busch
Control dependencies do not guarantee load order across the condition, allowing a CPU to predict and speculate memory reads. Commit 324b494c2862 inlined verifying a new completion with its handling. At least one architecture was observed to access the contents out of order, resulting in the driver using stale data for the completion. Add a dma read barrier before reading the completion queue entry and after the condition its contents depend on to ensure the read order is determinsitic. Reported-by: John Garry <john.garry@huawei.com> Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-12RDMA/iw_cxgb4: Fix incorrect function parametersPotnuri Bharat Teja
While reading the TCB field in t4_tcb_get_field32() the wrong mask is passed as a parameter which leads the driver eventually to a kernel panic/app segfault from access to an illegal SRQ index while flushing the SRQ completions during connection teardown. Fixes: 11a27e2121a5 ("iw_cxgb4: complete the cached SRQ buffers") Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12RDMA/core: Fix double put of resourceMaor Gottlieb
Do not decrease the reference count of resource tracker object twice in the error flow of res_get_common_doit. Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12IB/core: Fix potential NULL pointer dereference in pkey cacheJack Morgenstein
The IB core pkey cache is populated by procedure ib_cache_update(). Initially, the pkey cache pointer is NULL. ib_cache_update allocates a buffer and populates it with the device's pkeys, via repeated calls to procedure ib_query_pkey(). If there is a failure in populating the pkey buffer via ib_query_pkey(), ib_cache_update does not replace the old pkey buffer cache with the updated one -- it leaves the old cache as is. Since initially the pkey buffer cache is NULL, when calling ib_cache_update the first time, a failure in ib_query_pkey() will cause the pkey buffer cache pointer to remain NULL. In this situation, any calls subsequent to ib_get_cached_pkey(), ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to dereference the NULL pkey cache pointer, causing a kernel panic. Fix this by checking the ib_cache_update() return value. Fixes: 8faea9fd4a39 ("RDMA/cache: Move the cache per-port data into the main ib_port_data") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-12IB/hfi1: Fix another case where pq is left on waitlistMike Marciniszyn
The commit noted below fixed a case where a pq is left on the sdma wait list. It however missed another case. user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request(). If the first one fails as indicated by -EBUSY, the pq will be placed on the waitlist as by design. If the second call then succeeds, the pq is still on the waitlist setting up a race with the interrupt handler if a subsequent request uses a different SDMA engine Fix by deleting the first call. The use of pcount and the intent to send a short burst of packets followed by the larger balance of packets was never correctly implemented, because the two calls always send pcount packets no matter what. A subsequent patch will correct that issue. Fixes: 9a293d1e21a6 ("IB/hfi1: Ensure pq is not left on waitlist") Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-23 10:14:17 +0000