summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-09net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()Sudheer Kumar Doredla
CPSW ALE has 75-bit ALE entries stored across three 32-bit words. The cpsw_ale_get_field() and cpsw_ale_set_field() functions support ALE field entries spanning up to two words at the most. The cpsw_ale_get_field() and cpsw_ale_set_field() functions work as expected when ALE field spanned across word1 and word2, but fails when ALE field spanned across word2 and word3. For example, while reading the ALE field spanned across word2 and word3 (i.e. bits 62 to 64), the word3 data shifted to an incorrect position due to the index becoming zero while flipping. The same issue occurred when setting an ALE entry. This issue has not been seen in practice but will be an issue in the future if the driver supports accessing ALE fields spanning word2 and word3 Fix the methods to handle getting/setting fields spanning up to two words. Fixes: b685f1a58956 ("net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()") Signed-off-by: Sudheer Kumar Doredla <s-doredla@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/20250108172433.311694-1-s-doredla@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS requestXiang Zhang
The ISCSI_UEVENT_GET_HOST_STATS request is already handled in iscsi_get_host_stats(). This fix ensures that redundant responses are skipped in iscsi_if_rx(). - On success: send reply and stats from iscsi_get_host_stats() within if_recv_msg(). - On error: fall through. Signed-off-by: Xiang Zhang <hawkxiang.cpp@gmail.com> Link: https://lore.kernel.org/r/20250107022432.65390-1-hawkxiang.cpp@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-09scsi: core: Fix command pass through retry regressionMike Christie
scsi_check_passthrough() is always called, but it doesn't check for if a command completed successfully. As a result, if a command was successful and the caller used SCMD_FAILURE_RESULT_ANY to indicate what failures it wanted to retry, we will end up retrying the command. This will cause delays during device discovery because of the command being sent multiple times. For some USB devices it can also cause the wrong device size to be used. This patch adds a check for if the command was successful. If it is we return immediately instead of trying to match a failure. Fixes: 994724e6b3f0 ("scsi: core: Allow passthrough to request midlayer retries") Reported-by: Kris Karas <bugs-a21@moonlit-rail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219652 Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20250107010220.7215-1-michael.christie@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10Merge tag 'drm-etnaviv-next-2025-01-08' of ↵Dave Airlie
https://git.pengutronix.de/git/lst/linux into drm-next - cleanups - add fdinfo memory support - add explicit reset handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/41c1e476c6014010247d164ac8d21bd6f922cce1.camel@pengutronix.de
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10rust: use host dylib naming convention to support macOSTamir Duberstein
Because the `macros` crate exposes procedural macros, it must be compiled as a dynamic library (so it can be loaded by the compiler at compile-time). Before this change the resulting artifact was always named `libmacros.so`, which works on hosts where this matches the naming convention for dynamic libraries. However the proper name on macOS would be `libmacros.dylib`. This turns out to matter even when the dependency is passed with a path (`--extern macros=path/to/libmacros.so` rather than `--extern macros`) because rustc uses the file name to infer the type of the library (see link). This is because there's no way to specify both the path to and the type of the external library via CLI flags. The compiler could speculatively parse the file to determine its type, but it does not do so today. This means that libraries that match neither rustc's naming convention for static libraries nor the platform's naming convention for dynamic libraries are *rejected*. The only solution I've found is to follow the host platform's naming convention. This patch does that by querying the compiler to determine the appropriate name for the artifact. This allows the kernel to build with CONFIG_RUST=y on macOS. Link: https://github.com/rust-lang/rust/blob/d829780/compiler/rustc_metadata/src/locator.rs#L728-L752 Tested-by: Daniel Gomez <da.gomez@samsung.com> Co-developed-by: Fiona Behrens <me@kloenk.dev> Signed-off-by: Fiona Behrens <me@kloenk.dev> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Tested-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20241216-b4-dylib-host-macos-v7-1-cfc507681447@gmail.com [ Added `MAKEFLAGS=`s to avoid jobserver warnings. Removed space. Reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10tracing/kprobes: Simplify __trace_kprobe_create() by removing gotosMasami Hiramatsu (Google)
Simplify __trace_kprobe_create() by removing gotos. Link: https://lore.kernel.org/all/173643301102.1514810.6149004416601259466.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-10tracing: Use __free() for kprobe events to cleanupMasami Hiramatsu (Google)
Use __free() in trace_kprobe.c to cleanup code. Link: https://lore.kernel.org/all/173643299989.1514810.2924926552980462072.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-10tracing: Use __free() in trace_probe for cleanupMasami Hiramatsu (Google)
Use __free() in trace_probe to cleanup some gotos. Link: https://lore.kernel.org/all/173643298860.1514810.7267350121047606213.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-10kprobes: Remove remaining gotosMasami Hiramatsu (Google)
Remove remaining gotos from kprobes.c to clean up the code. This does not use cleanup macros, but changes code flow for avoiding gotos. Link: https://lore.kernel.org/all/173371212474.480397.5684523564137819115.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10kprobes: Remove unneeded gotoMasami Hiramatsu (Google)
Remove unneeded gotos. Since the labels referred by these gotos have only one reference for each, we can replace those gotos with the referred code. Link: https://lore.kernel.org/all/173371211203.480397.13988907319659165160.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10kprobes: Use guard for rcu_read_lockMasami Hiramatsu (Google)
Use guard(rcu) for rcu_read_lock so that it can remove unneeded gotos and make it more structured. Link: https://lore.kernel.org/all/173371209846.480397.3852648910271029695.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10kprobes: Use guard() for external locksMasami Hiramatsu (Google)
Use guard() for text_mutex, cpu_read_lock, and jump_label_lock in the kprobes. Link: https://lore.kernel.org/all/173371208663.480397.7535769878667655223.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10jump_label: Define guard() for jump_label_lockMasami Hiramatsu (Google)
Link: https://lore.kernel.org/all/173371207108.480397.12818384744149153972.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10tracing/eprobe: Adopt guard() and scoped_guard()Masami Hiramatsu (Google)
Use guard() or scoped_guard() in eprobe events for critical sections rather than discrete lock/unlock pairs. Link: https://lore.kernel.org/all/173289890996.73724.17421347964110362029.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10tracing/uprobe: Adopt guard() and scoped_guard()Masami Hiramatsu (Google)
Use guard() or scoped_guard() in uprobe events for critical sections rather than discrete lock/unlock pairs. Link: https://lore.kernel.org/all/173289889911.73724.12457932738419630525.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10tracing/kprobe: Adopt guard() and scoped_guard()Masami Hiramatsu (Google)
Use guard() or scoped_guard() in kprobe events for critical sections rather than discrete lock/unlock pairs. Link: https://lore.kernel.org/all/173289888883.73724.6586200652276577583.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10kprobes: Adopt guard() and scoped_guard()Masami Hiramatsu (Google)
Use guard() or scoped_guard() for critical sections rather than discrete lock/unlock pairs. Link: https://lore.kernel.org/all/173289887835.73724.608223217359025939.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10kprobes: Reduce preempt disable scope in check_kprobe_access_safe()Thomas Weißschuh
Commit a189d0350f387 ("kprobes: disable preempt for module_text_address() and kernel_text_address()") introduced a preempt_disable() region to protect against concurrent module unloading. However this region also includes the call to jump_label_text_reserved() which takes a long time; up to 400us, iterating over approx 6000 jump tables. The scope protected by preempt_disable() is largen than necessary. core_kernel_text() does not need to be protected as it does not interact with module code at all. Only the scope from __module_text_address() to try_module_get() needs to be protected. By limiting the critical section to __module_text_address() and try_module_get() the function responsible for the latency spike remains preemptible. This works fine even when !CONFIG_MODULES as in that case try_module_get() will always return true and that block can be optimized away. Limit the critical section to __module_text_address() and try_module_get(). Use guard(preempt)() for easier error handling. While at it also remove a spurious *probed_mod = NULL in an error path. On errors the output parameter is never inspected by the caller. Some error paths were clearing the parameters, some didn't. Align them for clarity. Link: https://lore.kernel.org/all/20241121-kprobes-preempt-v1-1-fd581ee7fcbb@linutronix.de/ Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-01-10tracing/kprobes: Fix to free objects when failed to copy a symbolMasami Hiramatsu (Google)
In __trace_kprobe_create(), if something fails it must goto error block to free objects. But when strdup() a symbol, it returns without that. Fix it to goto the error block to free objects correctly. Link: https://lore.kernel.org/all/173643297743.1514810.2408159540454241947.stgit@devnote2/ Fixes: 6212dd29683e ("tracing/kprobes: Use dyn_event framework for kprobe events") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-09hwmon: (dell-smm) Add Dell XPS 9370 to fan control whitelistPovilas Kanapickas
Add the Dell XPS 9370 to the fan control whitelist to allow for manual fan control. Signed-off-by: Povilas Kanapickas <povilas@radix.lt> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/6e6b7a47-d0e3-4c5a-8be2-dfc58852da8e@radix.lt Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-10rust: add `build_error!` to the preludeMiguel Ojeda
The sibling `build_assert!` is already in the prelude, it makes sense that a "core"/"language" facility like this is part of the prelude and users should not be defining their own one (thus there should be no risk of future name collisions and we would want to be aware of them anyway). Thus add `build_error!` into the prelude. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-3-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: kernel: move `build_error` hidden function to prevent mistakesMiguel Ojeda
Users were using the hidden exported `kernel::build_error` function instead of the intended `kernel::build_error!` macro, e.g. see the previous commit. To force to use the macro, move it into the `build_assert` module, thus making it a compilation error and avoiding a collision in the same "namespace". Using the function now would require typing the module name (which is hidden), not just a single character. Now attempting to use the function will trigger this error with the right suggestion by the compiler: error[E0423]: expected function, found macro `kernel::build_error` --> samples/rust/rust_minimal.rs:29:9 | 29 | kernel::build_error(); | ^^^^^^^^^^^^^^^^^^^ not a function | help: use `!` to invoke the macro | 29 | kernel::build_error!(); | + An alternative would be using an alias, but it would be more complex and moving it into the module seems right since it belongs there and reduces the amount of code at the crate root. Keep the `#[doc(hidden)]` inside `build_assert` in case the module is not hidden in the future. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: use the `build_error!` macro, not the hidden functionMiguel Ojeda
Code and some examples were using the function, rather than the macro. The macro is what is documented. Thus move users to the macro. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-1-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: kbuild: run Clippy for `rusttest` codeMiguel Ojeda
Running Clippy for `rusttest` code is useful to catch issues there too, even if the code is not as critical. In the future, this code may also run in kernelspace and could be copy-pasted. Thus it is useful to keep it under the same standards. For instance, it will now make us add `// SAFETY` comments. It also makes everything more consistent. Thus clean the few issues spotted by Clippy and start running it. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123180639.260191-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: give Clippy the minimum supported Rust versionMiguel Ojeda
Clippy's lints may avoid emitting a suggestion to use a language or library feature that is not supported by the minimum supported version, if given by the `msrv` field in the configuration file. For instance, Clippy should not suggest using `let ... else` in a lint if the MSRV did not implement that syntax. If the MSRV is not provided, Clippy will assume all features are available. Thus enable it with the minimum Rust version the kernel supports. Note that there is currently a small disadvantage in doing so: since we still use unstable features that nevertheless work in the range of versions we support (e.g. `#[expect(...)]`), we lose suggestions for those. However, over time we will stop using unstable features (especially language and library ones) as it is our goal, thus, in the end, we will want to have the `msrv` set. Rust is also considering adding a similar feature in `rustc` too, which we should probably enable if it becomes available [2]. Link: https://github.com/rust-lang/rust-clippy/blob/8298da72e7b81fa30c515631b40fc4c0845948cb/clippy_utils/src/msrvs.rs#L20 [1] Link: https://github.com/rust-lang/compiler-team/issues/772 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222345.346976-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: document `bindgen` 0.71.0 regressionMiguel Ojeda
`bindgen` 0.71.0 regressed [1] on the "`--version` requires header" issue which appeared in 0.69.0 first [2] and was fixed in 0.69.1. It has been fixed again in 0.71.1 [3]. Thus document it so that, when we upgrade the minimum past 0.69.0 in the future, we do not forget that we cannot remove the workaround until we arrive at 0.71.1 at least. Link: https://github.com/rust-lang/rust-bindgen/issues/3039 [1] Link: https://github.com/rust-lang/rust-bindgen/issues/2677 [2] Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#v0711-2024-12-09 [3] Reviewed-by: Fiona Behrens <me@kloenk.dev> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241209212544.1977065-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10Merge tag 'drm-intel-next-2025-01-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag) - Use hw support for min/interim ddb allocation for async flip (Vinod) - More general code refactor to allow full display separation (Jani) - Expose dsc sink max slice count via debugfs (Swati) - Fix C10 pll programming sequence (Suraj) - Fix DG1 power gate sequence (Rodrigo) - Use preemption timeout on selftest cleanup (Janusz) - DP DSC related fixes (Ankit) - Fix HDCP compliance test (Suraj) - Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj) - Adjust Added Wake Time with PKG_C_LATENCY (Animesh) - Enabling uncompressed 128b/132b UHBR SST (Jani) - Handle hdmi connector init failures, and no HDMI/DP cases (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com
2025-01-09firewall: remove misplaced semicolon from stm32_firewall_get_firewallguanjing
Remove misplaced colon in stm32_firewall_get_firewall() which results in a syntax error when the code is compiled without CONFIG_STM32_FIREWALL. Fixes: 5c9668cfc6d7 ("firewall: introduce stm32_firewall framework") Signed-off-by: guanjing <guanjing@cmss.chinamobile.com> Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-09Merge tag 'imx-fixes-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.13: - Add fallback for i.MX8QM ESAI compatible to fix a dt-schema warning caused by bindings update - Fix uSDHC1 clock for i.MX RT1050 - Enable SND_SOC_SPDIF in imx_v6_v7_defconfig to fix a regression caused by an i.MX6 SPDIF sound card change in DT - Fix address length of i.MX95 netcmix_blk_ctrl * tag 'imx-fixes-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imxrt1050: Fix clocks for mmc ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF arm64: dts: imx95: correct the address length of netcmix_blk_ctrl arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai Link: https://lore.kernel.org/r/Z3Jf9zbv/xH3YzuB@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-09Merge tag 'qcom-arm64-fixes-for-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm Arm64 DeviceTree fixes for v6.13 Revert the enablement of OTG support on primary and secondary USB Type-C controllers of X1 Elite, for now, as this broke support for USB hotplug. Disable the TPDM DCC device on SA8775P, as this is inaccessible per current firmware configuration. Also correct the PCIe "addr_space" region to enable larger BAR sizes. Also fix the address space of PCIe6a found in X1 Elite. * tag 'qcom-arm64-fixes-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sa8775p: fix the secure device bootup issue Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers" Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports" arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports" arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions Link: https://lore.kernel.org/r/20250103024945.4649-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-09drm/amdgpu: fill the ucode bo during psp resume for SRIOVVictor Zhao
refill the ucode bo during psp resume for SRIOV, otherwise ucode load will fail after VM hibernation and fb clean. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/gfx10: Enable cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUsSrinivasan Shanmugam
Enable the cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUs to provide data isolation between GPU workloads. The cleaner shader is responsible for clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps prevent data leakage and ensures accurate computation results. This update extends cleaner shader support to GFX10.3.2/10.3.4/10.3.5 GPUs, previously available for GFX10.3.0. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix gpu recovery disable with per queue resetJonathan Kim
Per queue reset should be bypassed when gpu recovery is disabled with module parameter. Fixes: ee0a469cf917 ("drm/amdkfd: support per-queue reset on gfx9") Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: wrong array index to get ip block for PSPJiang Liu
The adev->ip_blocks array is not indexed by AMD_IP_BLOCK_TYPE_xxx, instead we should call amdgpu_device_ip_get_ip_block() to get the corresponding IP block oject. Fix some checkpatch issues (Alex) Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: tear down ttm range manager for doorbell in amdgpu_ttm_fini()Jiang Liu
Tear down ttm range manager for doorbell in function amdgpu_ttm_fini(), to avoid memory leakage. Fixes: 792b84fb9038 ("drm/amdgpu: initialize ttm for doorbells") Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix incorrect number of active RBs for gfx12Tim Huang
The RB bitmap should be global active RB bitmap & active RB bitmap based on active SA. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix incorrect active RB bitmap in setup RBsTim Huang
The RB bitmap width per SA may be 0x1 for some ASICs. Use the actual bitmap of SA instead of 0x3 to determine the active RB bitmap. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdkfd: Move gfx12 trap handler to separate fileJay Cornwall
gfx12 derivatives will have substantially different trap handler implementations from gfx10/gfx11. Add a separate source file for gfx12+ and remove unneeded conditional code. No functional change. v2: Revert copyright date to 2018, minor comment fixes Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Lancelot Six <lancelot.six@amd.com> Cc: Jonathan Kim <jonathan.kim@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: Fix shift type in amdgpu_debugfs_sdma_sched_mask_set()Dan Carpenter
The "mask" and "val" variables are type u64. The problem is that the BIT() macros are type unsigned long which is just 32 bits on 32bit systems. It's unlikely that people will be using this driver on 32bit kernels and even if they did we only use the lower AMDGPU_MAX_SDMA_INSTANCES (16) bits. So this bug does not affect anything in real life. Still, for correctness sake, u64 bit masks should use BIT_ULL(). Fixes: d2e3961ae371 ("drm/amdgpu: add amdgpu_sdma_sched_mask debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/d39a9325-87a4-4543-b6ec-1c61fca3a6fc@stanley.mountain Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: enable gfx12 queue reset flagJesse Zhang
Enable the kgq and kcq queue reset flag Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amd/display: Increase sanitizer frame larger than limit when compile ↵Nathan Chancellor
testing with clang Commit 24909d9ec7c3 ("drm/amd/display: Overwriting dualDPP UBF values before usage") added a new warning in dml2/display_mode_core.c when building allmodconfig with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:6268:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Werror,-Wframe-larger-than] 6268 | static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) | ^ Commit be4e3509314a ("drm/amd/display: DML21 Reintegration For Various Fixes") introduced one in dml2_core/dml2_core_dcn4_calcs.c with the same configuration: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: error: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than] 7236 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params) | ^ In the case of the first warning, the stack usage was already at the limit at the parent change, so the offending change was rather innocuous. In the case of the second warning, there was a rather dramatic increase in stack usage compared to the parent: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7032:13: error: stack frame size (2696) exceeds limit (2048) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than] 7032 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params) | ^ This is an unfortunate interaction between an issue with stack slot reuse in LLVM that gets exacerbated by sanitization (which gets enabled with all{mod,yes}config) and function calls using a much higher number of parameters than is typical in the kernel, necessitating passing most of these values on the stack. While it is possible that there should be source code changes to address these warnings, this code is difficult to modify for various reasons, as has been noted in other changes that have occurred for similar reasons, such as commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2"). Increase the frame larger than limit when compile testing with clang and the sanitizers enabled to avoid this breakage in all{mod,yes}config, as they are commonly used and valuable testing targets. While it is not the best to hide this issue, it is not really relevant when compile testing, as the sanitizers are commonly stressful on optimizations and they are only truly useful at runtime, which COMPILE_TEST states will not occur with the current build. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412121748.chuX4sap-lkp@intel.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/pm: Implement SDMA queue reset for different asicJesse Zhang
Implement sdma queue reset by SMU_MSG_ResetSDMA2 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Suggested-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/pm: add definition PPSMC_MSG_ResetSDMA2Jesse Zhang
add the PPSMC_MSG_ResetSDMA2 definition for smu 13.0.6 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu/sdma4.4.2: add apu support in sdma queue resetJesse Zhang
Remove apu check in sdma queue reset. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09Merge branch 'tools-ynl-add-install-target'Jakub Kicinski
Jan Stancek says: ==================== tools: ynl: add install target This series adds an install target for ynl. The python code is moved to a subdirectory, so it can be used as a package with flat layout, as well as directly from the tree. To try the install as a non-root user you can run: $ mkdir /tmp/myroot $ make DESTDIR=/tmp/myroot install $ PATH="/tmp/myroot/usr/bin:$PATH" PYTHONPATH="$(ls -1d /tmp/myroot/usr/lib/python*/site-packages)" ynl --help Proposed install layout is described in last patch. ==================== Link: https://patch.msgid.link/cover.1736343575.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09tools: ynl: add main install targetJan Stancek
This will install C library, specs, rsts and pyynl. The initial structure is: $ mkdir /tmp/myroot $ make DESTDIR=/tmp/myroot install /usr /usr/lib64 /usr/lib64/libynl.a /usr/lib/python3.XX/site-packages/pyynl/* /usr/lib/python3.XX/site-packages/pyynl-0.0.1.dist-info/* /usr/bin /usr/bin/ynl /usr/bin/ynl-ethtool /usr/include/ynl/*.h /usr/share /usr/share/doc /usr/share/doc/ynl /usr/share/doc/ynl/*.rst /usr/share/ynl /usr/share/ynl/genetlink-c.yaml /usr/share/ynl/genetlink-legacy.yaml /usr/share/ynl/genetlink.yaml /usr/share/ynl/netlink-raw.yaml /usr/share/ynl/specs /usr/share/ynl/specs/devlink.yaml /usr/share/ynl/specs/dpll.yaml /usr/share/ynl/specs/ethtool.yaml /usr/share/ynl/specs/fou.yaml /usr/share/ynl/specs/handshake.yaml /usr/share/ynl/specs/mptcp_pm.yaml /usr/share/ynl/specs/netdev.yaml /usr/share/ynl/specs/net_shaper.yaml /usr/share/ynl/specs/nfsd.yaml /usr/share/ynl/specs/nftables.yaml /usr/share/ynl/specs/nlctrl.yaml /usr/share/ynl/specs/ovs_datapath.yaml /usr/share/ynl/specs/ovs_flow.yaml /usr/share/ynl/specs/ovs_vport.yaml /usr/share/ynl/specs/rt_addr.yaml /usr/share/ynl/specs/rt_link.yaml /usr/share/ynl/specs/rt_neigh.yaml /usr/share/ynl/specs/rt_route.yaml /usr/share/ynl/specs/rt_rule.yaml /usr/share/ynl/specs/tcp_metrics.yaml /usr/share/ynl/specs/tc.yaml /usr/share/ynl/specs/team.yaml Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/c882688d751295c7f35c7d4eba104cd5174a0861.1736343575.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09tools: ynl: add install target for generated contentJan Stancek
Generate docs using ynl_gen_rst and add install target for headers, specs and generates rst files. Factor out SPECS_DIR since it's repeated many times. Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/645c68e3d201f1ef4276e3daddfe06262a0c2804.1736343575.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09tools: ynl: add initial pyproject.toml for packagingJan Stancek
Add pyproject.toml and define authors, dependencies and user-facing scripts. This will be used later by pip to install python code. Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/b184b43340f08aef97387bfd7f2b2cd9b015c343.1736343575.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09tools: ynl: move python code to separate sub-directoryJan Stancek
Move python code to a separate directory so it can be packaged as a python module. Updates existing references in selftests and docs. Also rename ynl-gen-[c|rst] to ynl_gen_[c|rst], avoid dashes as these prevent easy imports for entrypoints. Signed-off-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/a4151bad0e6984e7164d395125ce87fd2e048bf1.1736343575.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 02:43:28 +0000