| Age | Commit message (Collapse) | Author |
|---|
|
The driver load failed with error message,
qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef
and with a kernel crash,
BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
Workqueue: events_unbound qla_register_fcport_fn [qla2xxx]
RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc]
RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000
RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000
RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030
R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4
R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8
FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0
Call Trace:
qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx]
? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx]
qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx]
qla_register_fcport_fn+0x54/0xc0 [qla2xxx]
Exit the qla_nvme_register_remote() function when qla_nvme_register_hba()
fails and correctly validate nvme_local_port.
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The device does not come online when the target port is online. There were
multiple RSCNs indicating multiple devices were affected. Driver is in the
process of finishing a fabric scan. A new RSCN (device up) arrived at the
tail end of the last fabric scan. Driver mistakenly thinks the new RSCN is
being taken care of by the previous fabric scan, where this notification is
cleared and not acted on. The laser needs to be blinked again to get the
device to show up.
To prevent driver from accidentally clearing the RSCN notification, each
RSCN is given a generation value. A fabric scan will scan for that
generation(s). Any new RSCN arrive after the scan start will have a new
generation value. This will trigger another scan to get latest data. The
RSCN notification flag will be cleared when the scan is associate to that
generation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406210538.w875N70K-lkp@intel.com/
Fixes: bb2ca6b3f09a ("scsi: qla2xxx: Relogin during fabric disturbance")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Eric Biggers <ebiggers@kernel.org> says:
Add support for Flash Memory Protector (FMP), which is the inline
encryption hardware on Exynos and Exynos-based SoCs.
Specifically, add support for the "traditional FMP mode" that works on
many Exynos-based SoCs including gs101. This is the mode that uses
"software keys" and is compatible with the upstream kernel's existing
inline encryption framework in the block and filesystem layers. I
plan to add support for the wrapped key support on gs101 at a later
time.
Tested on gs101 (specifically Pixel 6) by running the 'encrypt' group
of xfstests on a filesystem mounted with the 'inlinecrypt' mount
option.
This patchset applies to v6.10-rc6, and it has no prerequisites that
aren't already upstream.
Link: https://lore.kernel.org/r/20240708235330.103590-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for Flash Memory Protector (FMP), which is the inline
encryption hardware on Exynos and Exynos-based SoCs.
Specifically, add support for the "traditional FMP mode" that works on many
Exynos-based SoCs including gs101. This is the mode that uses "software
keys" and is compatible with the upstream kernel's existing inline
encryption framework in the block and filesystem layers. I plan to add
support for the wrapped key support on gs101 at a later time.
Tested on gs101 (specifically Pixel 6) by running the 'encrypt' group of
xfstests on a filesystem mounted with the 'inlinecrypt' mount option.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-7-ebiggers@kernel.org
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since the nonstandard inline encryption support on Exynos SoCs requires
that raw cryptographic keys be copied into the PRDT, it is desirable to
zeroize those keys after each request to keep them from being left in
memory. Therefore, add a quirk bit that enables the zeroization.
We could instead do the zeroization unconditionally. However, using a
quirk bit avoids adding the zeroization overhead to standard devices.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-6-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a variant op to allow host drivers to initialize nonstandard
crypto-related fields in the PRDT. This is needed to support inline
encryption on the "Exynos" UFS controller.
Note that this will be used together with the support for overriding the
PRDT entry size that was already added by commit ada1e653a5ea ("scsi: ufs:
core: Allow UFS host drivers to override the sg entry size").
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-5-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE which tells the UFS core to not use
the crypto enable bit defined by the UFS specification. This is needed to
support inline encryption on the "Exynos" UFS controller.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-4-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fold ufshcd_clear_keyslot() into its only remaining caller.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-3-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE which lets UFS host drivers
initialize the blk_crypto_profile themselves rather than have it be
initialized by ufshcd-core according to the UFSHCI standard. This is
needed to support inline encryption on the "Exynos" UFS controller which
has a nonstandard interface.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-2-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Please consider this series of UFS driver patches for the next merge window.
Thank you,
Bart.
Link: https://lore.kernel.org/r/20240708211716.2827751-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in my fixes branch to resolve an mpi3mr merge conflict reported
by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFSHCI controllers that are compliant with the UFSHCI 4.0 standard report
the maximum number of supported commands in the controller capabilities
register. Use that value if .get_hba_mac == NULL.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-11-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make ufshcd_mcq_decide_queue_depth() easier to read by inlining
ufshcd_mcq_vops_get_hba_mac().
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-10-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the ufshcd_mcq_enable() call from inside ufshcd_config_mcq() to the
callers of this function. No functionality is changed by this patch. This
patch makes a later patch easier to read ("scsi: ufs: Make .get_hba_mac()
optional").
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-9-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the "hba->mcq_enabled = true" assignment to prevent that it gets
duplicated by a later patch that will introduce more ufshcd_mcq_enable()
calls. No functionality is changed by this patch.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-8-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve code readability by inlining is_mcq_enabled().
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-7-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the hba->reserved_slot and the host->can_queue assignments from
ufshcd_config_mcq() into ufshcd_alloc_mcq(). The advantages of this change
are as follows:
- It becomes easier to verify that these two parameters are updated if
hba->nutrs is updated.
- It prevents unnecessary assignments to these two parameters. While
ufshcd_config_mcq() is called during host reset, ufshcd_alloc_mcq() is
not.
Cc: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename this constant to prepare for the introduction of the
MASK_TRANSFER_REQUESTS_SLOTS_MCQ constant. The acronym "SDB" stands for
"single doorbell" (mode).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SCSI host template members .cmd_per_lun and .can_queue are copied into
the SCSI host data structure. Before these are used, these are overwritten
by ufshcd_init(). Hence, this patch does not change any functionality.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of first zero-initializing struct uic_command and next initializing
it memberwise, initialize all members at once.
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Several functions are declared in include/ufs/ufshcd.h and also in
drivers/ufs/core/ufshcd-priv.h. Remove the duplicate declarations.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-2-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Tony Nguyen says:
====================
ice: Support to dump PHY config, FEC
Anil Samal says:
Implementation to dump PHY configuration and FEC statistics to
facilitate link level debugging of customer issues. Implementation has
two parts
a. Serdes equalization
# ethtool -d eth0
Output:
Offset Values
------ ------
0x0000: 00 00 00 00 03 00 00 00 05 00 00 00 01 08 00 40
0x0010: 01 00 00 40 00 00 39 3c 01 00 00 00 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
...
0x01f0: 01 00 00 00 ef be ad de 8f 00 00 00 00 00 00 00
0x0200: 00 00 00 00 ef be ad de 00 00 00 00 00 00 00 00
0x0210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0230: 00 00 00 00 00 00 00 00 00 00 00 00 fa ff 00 00
0x0240: 06 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
0x0250: 0f b0 0f b0 00 00 00 00 00 00 00 00 00 00 00 00
0x0260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x02a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x02b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x02c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x02d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x02e0: 00 00 00 00 00 00 00 00 00 00 00 00
Current implementation appends 176 bytes i.e. 44 bytes * 4 serdes lane.
For port with 2 serdes lane, first 88 bytes are valid values and
remaining 88 bytes are filled with zero. Similarly for port with 1
serdes lane, first 44 bytes are valid and remaining 132 bytes are marked
zero.
Each set of serdes equalizer parameter (i.e. set of 44 bytes) follows
below order
a. rx_equalization_pre2
b. rx_equalization_pre1
c. rx_equalization_post1
d. rx_equalization_bflf
e. rx_equalization_bfhf
f. rx_equalization_drate
g. tx_equalization_pre1
h. tx_equalization_pre3
i. tx_equalization_atten
j. tx_equalization_post1
k. tx_equalization_pre2
Where each individual equalizer parameter is of 4 bytes. As ethtool
prints values as individual bytes, for little endian machine these
values will be in reverse byte order.
b. FEC block counts
# ethtool -I --show-fec eth0
Output:
FEC parameters for eth0:
Supported/Configured FEC encodings: Auto RS BaseR
Active FEC encoding: RS
Statistics:
corrected_blocks: 0
uncorrectable_blocks: 0
This series do following:
Patch 1 - Implementation to support user provided flag for side band
queue command.
Patch 2 - Currently driver does not have a way to derive serdes lane
number, pcs quad , pcs port from port number. So we introduced a
mechanism to derive above info.
Ethtool interface extension to include FEC statistics counter.
Patch 3 - Ethtool interface extension to include serdes equalizer output.
v1: https://lore.kernel.org/netdev/20240702180710.2606969-1-anthony.l.nguyen@intel.com/
====================
Link: https://patch.msgid.link/20240709202951.2103115-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To debug link issues in the field, serdes Tx/Rx equalizer values
help to determine the health of serdes lane.
Extend 'ethtool -d' option to dump serdes Tx/Rx equalizer.
The following list of equalizer param is supported
a. rx_equalization_pre2
b. rx_equalization_pre1
c. rx_equalization_post1
d. rx_equalization_bflf
e. rx_equalization_bfhf
f. rx_equalization_drate
g. tx_equalization_pre1
h. tx_equalization_pre3
i. tx_equalization_atten
j. tx_equalization_post1
k. tx_equalization_pre2
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To debug link issues in the field, it is paramount to
dump fec corrected/uncorrected block counts from firmware.
Firmware requires PCS quad number and PCS port number to
read FEC statistics. Current driver implementation does
not maintain above physical properties of a port.
Add new driver API to derive physical properties of an input
port.These properties include PCS quad number, PCS port number,
serdes lane count, primary serdes lane number.
Extend ethtool option '--show-fec' to support fec statistics.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
Standard defines above statistics per lane but current
implementation supports total FEC statistics per port
i.e. sum of all lane per port. Find sample output below
FEC parameters for ens21f0np0:
Supported/Configured FEC encodings: Auto RS BaseR
Active FEC encoding: RS
Statistics:
corrected_blocks: 0
uncorrectable_blocks: 0
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current driver implementation for Sideband Queue supports a
fixed flag (ICE_AQ_FLAG_RD). To retrieve FEC statistics from
firmware, Sideband Queue command is used with a different flag.
Extend API for Sideband Queue command to use 'flags' as input
argument.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anil Samal <anil.samal@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240709202951.2103115-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert enetc device binding file to yaml. Split to 3 yaml files,
'fsl,enetc.yaml', 'fsl,enetc-mdio.yaml', 'fsl,enetc-ierb.yaml'.
Additional Changes:
- Add pci<vendor id>,<production id> in compatible string.
- Ref to common ethernet-controller.yaml and mdio.yaml.
- Add Wei fang, Vladimir and Claudiu as maintainer.
- Update ENETC description.
- Remove fixed-link part.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240709214841.570154-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
retracted its window to zero, tcp_retransmit_timer() can
retransmit a packet every two jiffies (2 ms for HZ=1000),
for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.
The fix is to make sure tcp_rtx_probe0_timed_out() takes
icsk->icsk_user_timeout into account.
Before blamed commit, the socket would not timeout after
icsk->icsk_user_timeout, but would use standard exponential
backoff for the retransmits.
Also worth noting that before commit e89688e3e978 ("net: tcp:
fix unexcepted socket die when snd_wnd is 0"), the issue
would last 2 minutes instead of 4.
Fixes: b701a99e431d ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jon Maxwell <jmaxwell37@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240710001402.2758273-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8211F PHY does support LED configuration, document support
for LEDs in the binding document.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240708211649.165793-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CXL driver was recently updated to return EBUSY rather than
ENXIO when the device reports that an injection request exceeds
the device's limit. That change to EBUSY allows debug users to
differentiate between limit reached and inject failures for any
other reason.
Change cxl-test to also return EBUSY and tidy up the dev_dbg()
messaging to emit the correct limit.
Reminder: the cxl-test per device injection limit is a configurable
attribute: /sys/bus/platform/drivers/cxl_mock_mem/poison_inject_max
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/ba1b80e1658b644d85d0d5e2287112d00a48b9cf.1720316188.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The CXL driver provides a debugfs interface offering users the
ability to inject and clear poison to a memdev. Once a user has
injected up to the devices limit further injection requests fail
with ENXIO until a clear poison is issued.
Users may not have device specs in hand or may want to intentionally
hit the limit and then clear. Replace the usual ENXIO return status
with EBUSY so users can recognize this failure.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/825bd4c67fb55a4373c4182d999ad49d4e6b4fe7.1720316188.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Each Host Bridge instance has a corresponding CXL Host Bridge Structure
(CHBS) ACPI table that identifies its capabilities. CHBS tables can be
two types (CXL 3.1 Table 9-21): The PCIe Root Complex Register Block
(RCRB) and CXL Host Bridge Component Registers (CHBCR).
If a Host Bridge is attached to a device that is operating in Restricted
CXL Device Mode (RCD), BIOS publishes an RCRB with the base address of
registers that describe its capabilities (CXL 3.1 sec. 9.11).
Instead, the new (CXL 2.0+) Component registers can only be accessed
by means of a base address published with a CHBCR (CXL 3.1 sec. 9.12).
If an eRCD (a device that forces the host-bridge into CXL 1.1 Restricted
CXL Host mode) is attached to a CXL 2.0+ Host-Bridge, the current CXL
specification does not define a mechanism for finding CXL-2.0-only
root-port component registers like HDM decoders and Extended Security
capability.
An algorithm to locate a CHBCR associated with an RCRB, would be too
invasive to land without some concrete motivation.
Therefore, just print a message to inform of unsupported config.
Count how many different CHBS "Version" types are detected by
cxl_get_chbs_iter(). Then make cxl_get_chbs() print a warning if that sum
is greater than 1.
Tested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240628175535.272472-1-fabio.m.de.francesco@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Merge series from Rayyan Ansari <rayyan.ansari@linaro.org>:
These patches convert the remaining plain text bindings for Qualcomm
sound drivers to dt schema, so device trees can be validated against
them.
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Commit series that makes some small improvements to code and the
kernel log messages.
|
|
Kumar Kartikeya Dwivedi says:
====================
Fixes for BPF timer lockup and UAF
The following patches contain fixes for timer lockups and a
use-after-free scenario.
This set proposes to fix the following lockup situation for BPF timers.
CPU 1 CPU 2
bpf_timer_cb bpf_timer_cb
timer_cb1 timer_cb2
bpf_timer_cancel(timer_cb2) bpf_timer_cancel(timer_cb1)
hrtimer_cancel hrtimer_cancel
In this case, both callbacks will continue waiting for each other to
finish synchronously, causing a lockup.
The proposed fix adds support for tracking in-flight cancellations
*begun by other timer callbacks* for a particular BPF timer. Whenever
preparing to call hrtimer_cancel, a callback will increment the target
timer's counter, then inspect its in-flight cancellations, and if
non-zero, return -EDEADLK to avoid situations where the target timer's
callback is waiting for its completion.
This does mean that in cases where a callback is fired and cancelled, it
will be unable to cancel any timers in that execution. This can be
alleviated by maintaining the list of waiting callbacks in bpf_hrtimer
and searching through it to avoid interdependencies, but this may
introduce additional delays in bpf_timer_cancel, in addition to
requiring extra state at runtime which may need to be allocated or
reused from bpf_hrtimer storage. Moreover, extra synchronization is
needed to delete these elements from the list of waiting callbacks once
hrtimer_cancel has finished.
The second patch is for a deadlock situation similar to above in
bpf_timer_cancel_and_free, but also a UAF scenario that can occur if
timer is armed before entering it, if hrtimer_running check causes the
hrtimer_cancel call to be skipped.
As seen above, synchronous hrtimer_cancel would lead to deadlock (if
same callback tries to free its timer, or two timers free each other),
therefore we queue work onto the global workqueue to ensure outstanding
timers are cancelled before bpf_hrtimer state is freed.
Further details are in the patches.
====================
Link: https://lore.kernel.org/r/20240709185440.1104957-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Document bindings for the T-Head TH1520 AP sub-system clock controller.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Co-developed-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20240623-th1520-clk-v2-1-ad8d6432d9fb@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Introduce a new help addrs_per_page() to wrap common code
from addrs_per_inode() and addrs_per_block() for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use temporary variable instead of F2FS_I() for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.
All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86
Refer to CXL spec r3.1 Table 8-71
Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.
Fixes: 472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240710023112.8063-1-engguopeng@buaa.edu.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs.
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Given a schedule:
timer1 cb timer2 cb
bpf_timer_cancel(timer2); bpf_timer_cancel(timer1);
Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.
Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.
Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.
Background on prior attempts:
Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.
lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;
The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.
It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.
Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel.
Reported-by: Dohyun Kim <dohyunkim@google.com>
Reported-by: Neel Natu <neelnatu@google.com>
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In case of the COW file, new updates and GC writes are already
separated to page caches of the atomic file and COW file. As some cases
that use the meta inode for GC, there are some race issues between a
foreground thread and GC thread.
To handle them, we need to take care when to invalidate and wait
writeback of GC pages in COW files as the case of using the meta inode.
Also, a pointer from the COW inode to the original inode is required to
check the state of original pages.
For the former, we can solve the problem by using the meta inode for GC
of COW files. Then let's get a page from the original inode in
move_data_block when GCing the COW file to avoid race condition.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way")
Cc: stable@vger.kernel.org #v5.19+
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Sunmin Jeong <s_min.jeong@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The page cache of the atomic file keeps new data pages which will be
stored in the COW file. It can also keep old data pages when GCing the
atomic file. In this case, new data can be overwritten by old data if a
GC thread sets the old data page as dirty after new data page was
evicted.
Also, since all writes to the atomic file are redirected to COW inodes,
GC for the atomic file is not working well as below.
f2fs_gc(gc_type=FG_GC)
- select A as a victim segment
do_garbage_collect
- iget atomic file's inode for block B
move_data_page
f2fs_do_write_data_page
- use dn of cow inode
- set fio->old_blkaddr from cow inode
- seg_freed is 0 since block B is still valid
- goto gc_more and A is selected as victim again
To solve the problem, let's separate GC writes and updates in the atomic
file by using the meta inode for GC writes.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way")
Cc: stable@vger.kernel.org #v5.19+
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Sunmin Jeong <s_min.jeong@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When new_curseg() is allocating a new segment, if mode=fragment:xxx is
switched on in large section scenario, __get_next_segno() will select
the next segno randomly in the range of [0, maxsegno] in order to
fragment segments.
If the candidate segno is free, get_new_segment() will use it directly
as the new segment.
However, if the section of the candidate is not empty, and some other
segments have already been used, and have a different type (e.g NODE)
with the candidate (e.g DATA), GC will complain inconsistent segment
type later.
This could be reproduced by the following steps:
dd if=/dev/zero of=test.img bs=1M count=10240
mkfs.f2fs -s 128 test.img
mount -t f2fs test.img /mnt -o mode=fragment:block
echo 1 > /sys/fs/f2fs/loop0/max_fragment_chunk
echo 512 > /sys/fs/f2fs/loop0/max_fragment_hole
dd if=/dev/zero of=/mnt/testfile bs=4K count=100
umount /mnt
F2FS-fs (loop0): Inconsistent segment (4377) type [0, 1] in SSA and SIT
In order to allow simulating segment fragmentation in large section
scenario, this patch reduces the candidate range:
* if curseg is the last segment in the section, return curseg->segno
to make get_new_segment() itself find the next free segment.
* if curseg is in the middle of the section, select candicate randomly
in the range of [curseg + 1, last_seg_in_the_same_section] to keep
type consistent.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Commit 59c9081bc86e ("f2fs: allow write page cache when writting cp")
allows write() to write data to page cache during checkpoint, so block
count fields like .total_valid_block_count, .alloc_valid_block_count
and .rf_node_block_count may encounter race condition as below:
CP Thread A
- write_checkpoint
- block_operations
- f2fs_down_write(&sbi->node_change)
- __prepare_cp_block
: ckpt->valid_block_count = .total_valid_block_count
- f2fs_up_write(&sbi->node_change)
- write
- f2fs_preallocate_blocks
- f2fs_map_blocks(,F2FS_GET_BLOCK_PRE_AIO)
- f2fs_map_lock
- f2fs_down_read(&sbi->node_change)
- f2fs_reserve_new_blocks
- inc_valid_block_count
: percpu_counter_add(&sbi->alloc_valid_block_count, count)
: sbi->total_valid_block_count += count
- f2fs_up_read(&sbi->node_change)
- do_checkpoint
: sbi->last_valid_block_count = sbi->total_valid_block_count
: percpu_counter_set(&sbi->alloc_valid_block_count, 0)
: percpu_counter_set(&sbi->rf_node_block_count, 0)
- fsync
- need_do_checkpoint
- f2fs_space_for_roll_forward
: alloc_valid_block_count was reset to zero,
so, it may missed last data during checkpoint
Let's change to update .total_valid_block_count, .alloc_valid_block_count
and .rf_node_block_count in block_operations(), then their access can be
protected by .node_change and .cp_rwsem lock, so that it can avoid above
race condition.
Fixes: 59c9081bc86e ("f2fs: allow write page cache when writting cp")
Cc: Yunlei He <heyunlei@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The lazytime/nolazytime options are now handled in the VFS, and are
never seen in filesystem parsers, so remove handling of these
options from f2fs.
Note: when lazytime support was added in 6d94c74ab85f it made
lazytime the default in default_options() - as a result, lazytime
cannot be disabled (because Opt_nolazytime is never seen in f2fs
parsing).
If lazytime is desired to be configurable, and default off is OK,
default_options() could be updated to stop setting it by default
and allow mount option control.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch fixes a potentially null pointer being accessed by
is_end_zone_blkaddr() that checks the last block of a zone
when f2fs is mounted as a single device.
Fixes: e067dc3c6b9c ("f2fs: maintain six open zones for zoned devices")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The original function call passed size of smap->bucket before the number of
buckets which raises the error 'calloc-transposed-args' on compilation.
Vlastimil Babka added:
The order of parameters can be traced back all the way to 6ac99e8f23d4
("bpf: Introduce bpf sk local storage") accross several refactorings,
and that's why the commit is used as a Fixes: tag.
In v6.10-rc1, a different commit 2c321f3f70bc ("mm: change inlined
allocation helpers to account at the call site") however exposed the
order of args in a way that gcc-14 has enough visibility to start
warning about it, because (in !CONFIG_MEMCG case) bpf_map_kvcalloc is
then a macro alias for kvcalloc instead of a static inline wrapper.
To sum up the warning happens when the following conditions are all met:
- gcc-14 is used (didn't see it with gcc-13)
- commit 2c321f3f70bc is present
- CONFIG_MEMCG is not enabled in .config
- CONFIG_WERROR turns this from a compiler warning to error
Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage")
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20240710100521.15061-2-vbabka@suse.cz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 15 of which are cc:stable.
No identifiable theme here - all are singleton patches, 19 are for MM"
* tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
filemap: replace pte_offset_map() with pte_offset_map_nolock()
arch/xtensa: always_inline get_current() and current_thread_info()
sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings
MAINTAINERS: mailmap: update Lorenzo Stoakes's email address
mm: fix crashes from deferred split racing folio migration
lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
mm: gup: stop abusing try_grab_folio
nilfs2: fix kernel bug on rename operation of broken directory
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
cachestat: do not flush stats in recency check
mm/shmem: disable PMD-sized page cache if needed
mm/filemap: skip to create PMD-sized page cache if needed
mm/readahead: limit page cache size in page_cache_ra_order()
mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
mm/damon/core: merge regions aggressively when max_nr_regions is unmet
Fix userfaultfd_api to return EINVAL as expected
mm: vmalloc: check if a hash-index is in cpu_possible_mask
mm: prevent derefencing NULL ptr in pfn_section_valid()
...
|
