summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-29ALSA: usb-audio: Fast Track C400 mixer controlsEldad Zack
Add a mixer quirks for the M-Audio Fast Track C400 and create the following: * Volume controls * Effect Type (reusing FTU controls) * Effect Volume * Effect Send/Return * Effect Program * Effect Feedback Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: Fast Track C400 mixer rangesEldad Zack
Add ranges for various Fast Track C400 controls, as observed while using the vendor's mixer control software (res values are an estimation). Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: M-Audio Fast Track C400 quirks tableEldad Zack
Adds a quirks table for the M-Audio Fast Track C400. Thanks to Clemens Ladisch <clemens@ladisch.de> for pointing out that the table must be sorted. Based on the following patch from the alsa-devel list: http://mailman.alsa-project.org/pipermail/alsa-devel/2012-May/051676.html See also: http://mailman.alsa-project.org/pipermail/alsa-devel/2012-April/051219.html Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: parameterize FTU effect unit controlEldad Zack
Adds the unit ID and the control as parameters to the creation of the effect unit control for the M-Audio Fast Track Ultra. This allows the code to be shared with other devices that use different unit ID and control, such as the M-Audio Fast Track C400. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: skip UAC2 EFFECT_UNITEldad Zack
Current code mishandles the case where the device is a UAC2 and the bDescriptorSubtype is a UAC2 Effect Unit (0x07). It tries to parse it as a Processing Unit (which is similar to two other UAC1 units with overlapping subtypes), but since the structure is different (See: 4.7.2.10, 4.7.2.11 in UAC2 standard), the parsing is done incorrectly and prevents the device from initializing. For now, just ignore the unit. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: add control index offsetEldad Zack
Currently, channel IDs exceeding 31 (0x1f) cannot be used. The channel ID is derived from the cmask. Extending cmask to a 64-bit type would only allow it to go up to 63 (0x3f). Some devices have channel IDs exceeding that as well. To address that, add an offset to the mixer element which is then accounted for in the UAC set/get functions. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: use sender stride for implicit feedbackEldad Zack
For implicit feedback endpoints, the number of bytes for each packet is matched by the corresponding synchronizing endpoint. The size is calculated by taking the actual size and dividing it by the stride - currently by the endpoint's stride, but we should use the synchronization source's stride. This is evident when the number of channels differ between the synchronization source and the implicitly fed-back endpoint, as with M-Audio Fast Track C400 - the synchronization source (capture) has 4 channels, while the implicit feedback mode endpoint has 6. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: replace hardcoded value with constEldad Zack
In this context, 0x01 is USB_ENDPOINT_XFER_ISOC. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29powerpc+of: Export of_reconfig_notifier_[register,unregister]Nathan Fontenot
The of reconfiguration notification chains should be exported for use by modules. Signed-off-by:Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Some more fixes trickled in over the past few days: 1) PIM device names can overflow the IFNAMSIZ buffer unless we properly limit the allowed indexes, fix from Eric Dumazet. 2) Under heavy load we can OOPS in icmp reply processing due to an unchecked inet_putpeer() call. Fix from Neal Cardwell. 3) SCTP round trip calculations need to use 64-bit math to avoid overflows, fix from Schoch Christian. 4) Fix a memory leak and an error return flub in SCTP and IRDA triggerable by userspace. Fix from Tommi Rantala and found by the syscall fuzzer (trinity). 5) MLX4 driver gives bogus size to memcpy() call, fix from Amir Vadai. 6) Fix length calculation in VHOST descriptor translation, from Michael S Tsirkin. 7) Ambassador ATM driver loops forever while loading firmware, fix from Dan Carpenter. 8) Over MTU packets in openvswitch warn about wrong device, fix from Jesse Gross. 9) Netfilter IPSET's netlink code can overrun a string buffer because it's not properly limited to IFNAMSIZ. Fix from Florian Westphal. 10) PCAN USB driver sets wrong timestamp in SKB, from Oliver Hartkopp. 11) Make sure the RX ifindex always has a valid value in the CAN BCM driver, even if we haven't received a frame yet. Fix also from Oliver Hartkopp." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: team: fix hw_features setup atm: forever loop loading ambassador firmware vhost: fix length for cross region descriptor irda: irttp: fix memory leak in irttp_open_tsap() error path net: qmi_wwan: add Huawei E173 net/mlx4_en: Can set maxrate only for TC0 sctp: Error in calculation of RTTvar sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails net: ipmr: limit MRT_TABLE identifiers ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow() can: bcm: initialize ifindex for timeouts without previous frame reception can: peak_usb: fix hwtstamp assignment netfilter: ipset: fix netiface set name overflow openvswitch: Store flow key len if ARP opcode is not request or reply. openvswitch: Print device when warning about over MTU packets.
2012-11-29do_coredump(): get rid of pt_regs argumentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29print_fatal_signal(): get rid of pt_regs argumentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29ptrace_signal(): get rid of unused argumentsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29get rid of ptrace_signal_deliver() argumentsAl Viro
the first one is equal to signal_pt_regs(), the second is never used (and always NULL, while we are at it). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29new helper: signal_pt_regs()Al Viro
Always equal to task_pt_regs(current); defined only when we are in signal delivery. It may be different from current_pt_regs() - e.g. architectures like m68k may have pt_regs location on exception different from that on a syscall and signals (just as ptrace handling) may happen on exceptions as well as on syscalls. When they are equal, it's often better to have signal_pt_regs defined (in asm/ptrace.h) as current_pt_regs - that tends to be optimized better than default would be. However, optimisation is the only reason why we might want an arch-specific definition; if current_pt_regs() and task_pt_regs(current) have different values, the latter one is right. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29unify default ptrace_signal_deliverAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29flagday: kill pt_regs argument of do_fork()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28death to idle_regs()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28don't pass regs to copy_process()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28flagday: don't pass regs to copy_thread()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28bfin: switch to generic vfork, get rid of pointless wrappersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28xtensa: switch to generic clone()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28openrisc: switch to use of generic fork and cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28unicore32: switch to generic clone(2)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28score: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic ↵Al Viro
clone() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.hAl Viro
now it can be done... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28mn10300: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28h8300: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28tile: switch to generic clone()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28m68k: sanitize copy_thread(), fork/vfork/clone wrappers, switch to generic ↵Al Viro
fork/vfork Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28alpha: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28s390: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28microblaze: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-28hexagon: switch to generic clone()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28sh: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28parisc: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28m32r: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28cris: switch to generic fork/vfork/cloneAl Viro
same braindamage as on s390 - the first two arguments of clone(2) in the wrong order. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28avr32: sanitize copy_thread(), switch to generic fork/vfork/clone, kill wrappersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28arm64: sanitize copy_thread(), switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28frv: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28powerpc: switch to generic fork/clone/vforkAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28arm: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28x86, um: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28get rid of pt_regs argument of ->load_binary()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28get rid of pt_regs argument of search_binary_handler()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28get rid of pt_regs argument of do_execve_common()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28get rid of pt_regs argument of do_execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28make compat_do_execve() static, lose pt_regs argumentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-10-02 17:09:02 +0000