summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-05drm/i915: Introduce per-engine workaroundsTvrtko Ursulin
We stopped re-applying the GT workarounds after engine reset since commit 59b449d5c82a ("drm/i915: Split out functions for different kinds of workarounds"). Issue with this is that some of the GT workarounds live in the MMIO space which gets lost during engine resets. So far the registers in 0x2xxx and 0xbxxx address range have been identified to be affected. This losing of applied workarounds has obvious negative effects and can even lead to hard system hangs (see the linked Bugzilla). Rather than just restoring this re-application, because we have also observed that it is not safe to just re-write all GT workarounds after engine resets (GPU might be live and weird hardware states can happen), we introduce a new class of per-engine workarounds and move only the affected GT workarounds over. Using the framework introduced in the previous patch, we therefore after engine reset, re-apply only the workarounds living in the affected MMIO address ranges. v2: * Move Wa_1406609255:icl to engine workarounds as well. * Rename API. (Chris Wilson) * Drop redundant IS_KABYLAKE. (Chris Wilson) * Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=107945 Fixes: 59b449d5c82a ("drm/i915: Split out functions for different kinds of workarounds") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181203133341.10258-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 4a15c75c42460252a63d30f03b4766a52945fb47) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-12-05media: ov5640: Make the FPS clamping / rounding more extendableMaxime Ripard
The current code uses an algorithm to clamp the FPS values and round them to the closest supported one that isn't really allows to be extended to more than two values. Rework it a bit to make it much easier to extend the amount of FPS options we support. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05drm/i915: Record GT workarounds in a listTvrtko Ursulin
To enable later verification of GT workaround state at various stages of driver lifetime, we record the list of applicable ones per platforms to a list, from which they are also applied. The added data structure is a simple array of register, mask and value items, which is allocated on demand as workarounds are added to the list. This is a temporary implementation which later in the series gets fused with the existing per context workaround list handling. It is separated at this stage since the following patch fixes a bug which needs to be as easy to backport as possible. Also, since in the following patch we will be adding a new class of workarounds (per engine) which can be applied from interrupt context, we straight away make the provision for safe read-modify-write cycle. v2: * Change dev_priv to i915 along the init path. (Chris Wilson) * API rename. (Chris Wilson) v3: * Remove explicit list size tracking in favour of growing the allocation in power of two chunks. (Chris Wilson) v4: Chris Wilson: * Change wa_list_finish to early return. * Copy workarounds using the compiler for static checking. * Do not bother zeroing unused entries. * Re-order struct i915_wa_list. v5: * kmalloc_array. * Whitespace cleanup. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181203133319.10174-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 25d140faaa25f728159eb8c304eae53d88a7f14e) Fixes: 59b449d5c82a ("drm/i915: Split out functions for different kinds of workarounds") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-12-05media: ov5640: Make the return rate type more explicitMaxime Ripard
In the ov5640_try_frame_interval function, the ret variable actually holds the frame rate index to use, which is represented by the enum ov5640_frame_rate in the driver. Make it more obvious. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Enhance FPS handlingMaxime Ripard
Now that we have moved the clock generation logic out of the bytes array, these arrays are identical between the 15fps and 30fps variants. Remove the duplicate entries, and convert the code accordingly. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Remove pixel clock ratesMaxime Ripard
The pixel clock rates were introduced to report the initially static clock rate. Since this is now handled dynamically, we can remove them entirely. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Compute the clock rate at runtimeMaxime Ripard
The clock rate, while hardcoded until now, is actually a function of the resolution, framerate and bytes per pixel. Now that we have an algorithm to adjust our clock rate, we can select it dynamically when we change the mode. This changes a bit the clock rate being used, with the following effect: +------+------+------+------+-----+-----------------+----------------+-----------+ | Hact | Vact | Htot | Vtot | FPS | Hardcoded clock | Computed clock | Deviation | +------+------+------+------+-----+-----------------+----------------+-----------+ | 640 | 480 | 1896 | 1080 | 15 | 56000000 | 61430400 | 8.84 % | | 640 | 480 | 1896 | 1080 | 30 | 112000000 | 122860800 | 8.84 % | | 1024 | 768 | 1896 | 1080 | 15 | 56000000 | 61430400 | 8.84 % | | 1024 | 768 | 1896 | 1080 | 30 | 112000000 | 122860800 | 8.84 % | | 320 | 240 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | | 320 | 240 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | | 176 | 144 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | | 176 | 144 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | | 720 | 480 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | | 720 | 480 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | | 720 | 576 | 1896 | 984 | 15 | 56000000 | 55969920 | 0.05 % | | 720 | 576 | 1896 | 984 | 30 | 112000000 | 111939840 | 0.05 % | | 1280 | 720 | 1892 | 740 | 15 | 42000000 | 42002400 | 0.01 % | | 1280 | 720 | 1892 | 740 | 30 | 84000000 | 84004800 | 0.01 % | | 1920 | 1080 | 2500 | 1120 | 15 | 84000000 | 84000000 | 0.00 % | | 1920 | 1080 | 2500 | 1120 | 30 | 168000000 | 168000000 | 0.00 % | | 2592 | 1944 | 2844 | 1944 | 15 | 84000000 | 165862080 | 49.36 % | +------+------+------+------+-----+-----------------+----------------+-----------+ Only the 640x480, 1024x768 and 2592x1944 modes are significantly affected by the new formula. In this case, 640x480 and 1024x768 are actually fixed by this change. Indeed, the sensor was sending data at, for example, 27.33fps instead of 30fps. This is -9%, which is roughly what we're seeing in the array. Testing these modes with the new clock setup actually fix that error, and data are now sent at around 30fps. 2592x1944, on the other hand, is probably due to the fact that this mode can only be used using MIPI-CSI2, in a two lane mode, and never really tested with a DVP bus. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Remove redundant register setupMaxime Ripard
The MIPI divider is also cleared as part of the clock setup sequence, so we can remove that code. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Remove redundant definesMaxime Ripard
The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT defines represent exactly the same setup, and are at the same value, than the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and OV5640_SCLK_ROOT_DIV. Remove them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Remove the clocks registers initializationMaxime Ripard
Part of the hardcoded initialization sequence is to set up the proper clock dividers. However, this is now done dynamically through proper code and as such, the static one is now redundant. Let's remove it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Adjust the clock based on the expected rateMaxime Ripard
The clock structure for the PCLK is quite obscure in the documentation, and was hardcoded through the bytes array of each and every mode. This is troublesome, since we cannot adjust it at runtime based on other parameters (such as the number of bytes per pixel), and we can't support either framerates that have not been used by the various vendors, since we don't have the needed initialization sequence. We can however understand how the clock tree works, and then implement some functions to derive the various parameters from a given rate. And now that those parameters are calculated at runtime, we can remove them from the initialization sequence. The modes also gained a new parameter which is the clock that they are running at, from the register writes they were doing, so for now the switch to the new algorithm should be transparent. Co-Developed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Adam Ford <aford173@gmail.com> #imx6dq Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ov5640: Fix set format regressionJacopo Mondi
The set_fmt operations updates the sensor format only when the image format is changed. When only the image sizes gets changed, the format do not get updated causing the sensor to always report the one that was previously in use. Without this patch, updating frame size only fails: [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ...] With this patch applied: [fmt:UYVY8_2X8/1024x768@1/30 field:none colorspace:srgb xfer:srgb ...] Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #imx6 w/ CSI2 interface on 4.19.6 and 4.20-RC5 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: mt9m111: allow to setup pixclk polarityEnrico Scholz
The chip can be configured to output data transitions on the rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the falling edge. Parsing the fw-node is made in a subfunction to bundle all (future) dt-parsing / fw-parsing stuff. [m.grzeschik@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set per default. Set bit to 0 (enable mask bit without value) to enable falling edge sampling.] [m.felsch@pengutronix.de: use fwnode helpers] [m.felsch@pengutronix.de: mv fw parsing into own function] [m.felsch@pengutronix.de: adapt commit msg] [sakari.ailus@linux.intel.com: V4L2 API usage changes to compile on media tree master] Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: dt-bindings: media: mt9m111: add pclk-sample propertyMarco Felsch
Add the pclk-sample property to the list of optional properties for the mt9m111 camera sensor. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: dt-bindings: media: mt9m111: adapt documentation to be more clearMarco Felsch
Replace the vague binding by a more verbose. Remove the remote property from the example since the driver don't support such a property. Also remove the bus-width property from the endpoint since the driver don't take care of it. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: mt9m111: add support to select formats and fps for {Q,SXGA}Michael Grzeschik
This patch implements the framerate selection using the skipping and readout power-modi features. The power-modi cut the framerate by half and each context has an independent selection bit. The same applies to the 2x skipping feature. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: mt9m111: add streaming check to set_fmtMichael Grzeschik
Currently set_fmt don't care about the streaming status, so the format can be changed during streaming. This can lead into wrong behaviours. Check if the device is already streaming and return -EBUSY to avoid wrong behaviours. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: mt9m111: add s_stream callbackMarco Felsch
Add callback to check if we are already streaming. Now other callbacks can check the state and return -EBUSY if we already streaming. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: imx274: select REGMAP_I2CLuca Ceresoli
The imx274 driver uses regmap and the build will fail without it. Fixes: drivers/media/i2c/imx274.c:142:21: error: variable ‘imx274_regmap_config’ has initializer but incomplete type static const struct regmap_config imx274_regmap_config = { ^~~~~~~~~~~~~ drivers/media/i2c/imx274.c:1869:19: error: implicit declaration of function ‘devm_regmap_init_i2c’ [-Werror=implicit-function-declaration] imx274->regmap = devm_regmap_init_i2c(client, &imx274_regmap_config); ^~~~~~~~~~~~~~~~~~~~ and others. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: imx274: declare the correct number of controlsLuca Ceresoli
v4l2_ctrl_handler_init() expects a hint of how many controls this handler is expected to refer to. Since this number here is always 4, let's pass exactly 4. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: imx274: fix stack corruption in imx274_read_regLuca Ceresoli
imx274_read_reg() takes a u8 pointer ("reg") and casts it to pass it to regmap_read(), which takes an unsigned int pointer. This results in a corrupted stack and random crashes. Fixes: 0985dd306f72 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor") Cc: stable@vger.kernel.org # for 4.15 and up Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05mac80211: ignore NullFunc frames in the duplicate detectionEmmanuel Grumbach
NullFunc packets should never be duplicate just like QoS-NullFunc packets. We saw a client that enters / exits power save with NullFunc frames (and not with QoS-NullFunc) despite the fact that the association supports HT. This specific client also re-uses a non-zero sequence number for different NullFunc frames. At some point, the client had to send a retransmission of the NullFunc frame and we dropped it, leading to a misalignment in the power save state. Fix this by never consider a NullFunc frame as duplicate, just like we do for QoS NullFunc frames. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449 CC: <stable@vger.kernel.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-05media: unify some sony camera sensors pattern namingBingbu Cao
Some Sony camera sensors have same test pattern definitions, this patch unify the pattern naming to make it more clear to the userspace. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: imx355: fix wrong order in test pattern menusBingbu Cao
current imx355 test pattern order in ctrl menu is not correct, this patch fixes it. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: imx319: fix wrong order in test pattern menusBingbu Cao
current imx319 test pattern order in ctrl menu is not correct, this patch fixes it. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: v4l2-fwnode: Demote warning to debug levelFabio Estevam
On a imx6q-wandboard the following warnings are observed: [ 4.327794] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: bad remote port parent [ 4.336118] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: bad remote port parent As explained by Philipp Zabel: "There are empty endpoint nodes (without remote-endpoint property) labeled ipu1_csi[01]_mux_from_parallel_sensor in the i.MX6 device trees for board DT implementers' convenience. See commit 2539f517acbdc ("ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections")." So demote the warning to debug level and make the wording a bit less misleading. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05mac80211: fix reordering of buffered broadcast packetsFelix Fietkau
If the buffered broadcast queue contains packets, letting new packets bypass that queue can lead to heavy reordering, since the driver is probably throttling transmission of buffered multicast packets after beacons. Keep buffering packets until the buffer has been cleared (and no client is in powersave mode). Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-05mac80211: ignore tx status for PS stations in ieee80211_tx_status_extFelix Fietkau
Make it behave like regular ieee80211_tx_status calls, except for the lack of filtered frame processing. This fixes spurious low-ack triggered disconnections with powersave clients connected to an AP. Fixes: f027c2aca0cf4 ("mac80211: add ieee80211_tx_status_noskb") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-05clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocksChen-Yu Tsai
All the audio interfaces on Allwinner SoCs need to change their module clocks during operation, to switch between support for 44.1 kHz and 48 kHz family sample rates. The clock rate for the module clocks is governed by their upstream audio PLL. The module clocks themselves only have a gate, and sometimes a divider or mux. Thus any rate changes need to be propagated upstream. Set the CLK_SET_RATE_PARENT flag for all audio module clocks to achieve this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-05clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLLChen-Yu Tsai
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can back port the settings from the newer SoC, in this case the H3, onto the A33. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-05media: firewire: Fix app_info parameter type in avc_ca{,_app}_infoNathan Chancellor
Clang warns: drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit conversion from 'int' to 'char' changes value from 159 to -97 [-Wconstant-conversion] app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Wconstant-conversion] app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit conversion from 'int' to 'char' changes value from 159 to -97 [-Wconstant-conversion] app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Wconstant-conversion] app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ 4 warnings generated. Change app_info's type to unsigned char to match the type of the member msg in struct ca_msg, which is the only thing passed into the app_info parameter in this function. Link: https://github.com/ClangBuiltLinux/linux/issues/105 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: sti/bdisp: don't pass GFP_DMA32 to dma_alloc_attrsChristoph Hellwig
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05tty: serial: 8250_mtk: always resume the device in probe.Peter Shih
serial8250_register_8250_port calls uart_config_port, which calls config_port on the port before it tries to power on the port. So we need the port to be on before calling serial8250_register_8250_port. Change the code to always do a runtime resume in probe before registering port, and always do a runtime suspend in remove. This basically reverts the change in commit 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling"), but still use pm_runtime callbacks. Fixes: 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling") Signed-off-by: Peter Shih <pihsun@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05USB: serial: console: fix reported terminal settingsJohan Hovold
The USB-serial console implementation has never reported the actual terminal settings used. Despite storing the corresponding cflags in its struct console, these were never honoured on later tty open() where the tty termios would be left initialised to the driver defaults. Unlike the serial console implementation, the USB-serial code calls subdriver open() already at console setup. While calling set_termios() and write() before open() looks like it could work for some USB-serial drivers, others definitely do not expect this, so modelling this after serial core is going to be intrusive, if at all possible. Instead, use a (renamed) tty helper to save the termios data used at console setup so that the tty termios reflects the actual terminal settings after a subsequent tty open(). Note that the calls to tty_init_termios() (tty_driver_install()) and tty_save_termios() are serialised using the disconnect mutex. This specifically fixes a regression that was triggered by a recent change adding software flow control to the pl2303 driver: a getty trying to disable flow control while leaving the baud rate unchanged would now also set the baud rate to the driver default (prior to the flow-control change this had been a noop). Fixes: 7041d9c3f01b ("USB: serial: pl2303: add support for tx xon/xoff flow control") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Florian Zumbiehl <florz@florz.de> Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-05clk: meson: add clk-input helper functionJerome Brunet
Add the clock input helper function. Several amlogic clock controllers will now be registering bypass clock input. Instead of copying this code in every of them, let's make an helper function for it Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed up to apply on Makefile and clkc.h] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181204165819.21541-2-jbrunet@baylibre.com
2018-12-05media: imx-pxp: remove duplicated include from imx-pxp.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: Staging: media: replace deprecated probe methodAndrey Abramov
Replaced i2c_driver::probe with i2c_driver::probe_new, because documentation says that probe method is "soon to be deprecated". Signed-off-by: Andrey Abramov <st5pub@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: ddbridge: remove another duplicate of io.h and sort includesMauro Carvalho Chehab
The io.h was still included twice. Having a large number of includes like that unsorted is likely the reason why we ended by having 3 includes of io.h and two includes of interrupt.h at the first place. So, let's reorder the includes on alphabetic order. That would make easier to maintain it. Fixes: 12645e0655e4 ("media: ddbridge: remove some duplicated include file") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05drm: revert "expand replace_fence to support timeline point v2"Christian König
This reverts commit 9a09a42369a4a37a959c051d8e1a1f948c1529a4. The whole interface isn't thought through. Since this function can't fail we actually can't allocate an object to store the sync point. Sorry, I should have taken the lead on this from the very beginning and reviewed it more thoughtfully. Going to propose a new interface as a follow up change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/265580/
2018-12-05media: ddbridge: remove some duplicated include filezhong jiang
interrupt.h and io.h have duplicated include. hence just remove redundant file. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05Revert "mfd: cros_ec: Use devm_kzalloc for private data"Enric Balletbo i Serra
This reverts commit 3aa2177e47878f7e7616da8a2050c44f22301b6e. That commit triggered a new WARN when unloading the module (see at the end of the commit message). When a class_dev is embedded in a structure then that class_dev is the thing that controls the lifetime of that structure, for that reason device managed allocations can't be used here. See Documentation/kobject.txt. Revert the above patch, so the struct is allocated using kzalloc and we have a release function for it that frees the allocated memory, otherwise it is broken. ------------[ cut here ]------------ Device 'cros_ec' does not have a release() function, it is broken and must be fixed. WARNING: CPU: 3 PID: 3675 at drivers/base/core.c:895 device_release+0x80/0x90 Modules linked in: btusb btrtl btintel btbcm bluetooth ... CPU: 3 PID: 3675 Comm: rmmod Not tainted 4.20.0-rc4 #76 Hardware name: Google Kevin (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : device_release+0x80/0x90 lr : device_release+0x80/0x90 sp : ffff00000c47bc70 x29: ffff00000c47bc70 x28: ffff8000e86b0d40 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000056000000 x24: 0000000000000015 x23: ffff8000f0bbf860 x22: ffff000000d320a0 x21: ffff8000ee93e100 x20: ffff8000ed931428 x19: ffff8000ed931418 x18: 0000000000000020 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000400 x14: 0000000000000143 x13: 0000000000000000 x12: 0000000000000400 x11: 0000000000000157 x10: 0000000000000960 x9 : ffff00000c47b9b0 x8 : ffff8000e86b1700 x7 : 0000000000000000 x6 : ffff8000f7d520b8 x5 : ffff8000f7d520b8 x4 : 0000000000000000 x3 : ffff8000f7d58e68 x2 : ffff8000e86b0d40 x1 : 37d859939c964800 x0 : 0000000000000000 Call trace: device_release+0x80/0x90 kobject_put+0x74/0xe8 device_unregister+0x20/0x30 ec_device_remove+0x34/0x48 [cros_ec_dev] platform_drv_remove+0x28/0x48 device_release_driver_internal+0x1a8/0x240 driver_detach+0x40/0x80 bus_remove_driver+0x54/0xa8 driver_unregister+0x2c/0x58 platform_driver_unregister+0x10/0x18 cros_ec_dev_exit+0x1c/0x2d8 [cros_ec_dev] __arm64_sys_delete_module+0x16c/0x1f8 el0_svc_common+0x84/0xd8 el0_svc_handler+0x2c/0x80 el0_svc+0x8/0xc ---[ end trace a57c4625f3c60ae8 ]--- Cc: stable@vger.kernel.org Fixes: 3aa2177e4787 ("mfd: cros_ec: Use devm_kzalloc for private data") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-12-05media: tvp5150: fix irq_request error path during probeMarco Felsch
Commit 37c65802e76a ("media: tvp5150: Add sync lock interrupt handling") introduced the interrupt handling. But we have to free the v4l2_ctrl_handler before we can return the error code. Fixes: 37c65802e76a ("media: tvp5150: Add sync lock interrupt handling") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05usb: quirk: add no-LPM quirk on SanDisk Ultra Flair deviceHarry Pan
Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end. i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ... Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset. Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all. The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583. Signed-off-by: Harry Pan <harry.pan@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05USB: Fix invalid-free bug in port_over_current_notify()Alan Stern
Syzbot and KASAN found the following invalid-free bug in port_over_current_notify(): -------------------------------------------------------------------------- BUG: KASAN: double-free or invalid-free in port_over_current_notify drivers/usb/core/hub.c:5192 [inline] BUG: KASAN: double-free or invalid-free in port_event drivers/usb/core/hub.c:5241 [inline] BUG: KASAN: double-free or invalid-free in hub_event+0xd97/0x4140 drivers/usb/core/hub.c:5384 CPU: 1 PID: 32710 Comm: kworker/1:3 Not tainted 4.20.0-rc3+ #129 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_invalid_free+0x64/0xa0 mm/kasan/report.c:336 __kasan_slab_free+0x13a/0x150 mm/kasan/kasan.c:501 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 port_over_current_notify drivers/usb/core/hub.c:5192 [inline] port_event drivers/usb/core/hub.c:5241 [inline] hub_event+0xd97/0x4140 drivers/usb/core/hub.c:5384 process_one_work+0xc90/0x1c40 kernel/workqueue.c:2153 worker_thread+0x17f/0x1390 kernel/workqueue.c:2296 kthread+0x35a/0x440 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 -------------------------------------------------------------------------- The problem is caused by use of a static array to store environment-string pointers. When the routine is called by multiple threads concurrently, the pointers from one thread can overwrite those from another. The solution is to use an ordinary automatic array instead of a static array. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+98881958e1410ec7e53c@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: appledisplay: Add 27" Apple Cinema DisplayAlexander Theissen
Add another Apple Cinema Display to the list of supported displays. Signed-off-by: Alexander Theissen <alex.theissen@me.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05media: remove redundant include moduleparam.hzhong jiang
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: drivers: media: pci: b2c2: Fix errors due to unappropriate coding style.Iliya Iliev
Fix error due to assignment in conditional expression. Fix errors due to absence of empty spaces separators after commas in function calls. Fix errors due to lines longer than 80 characters. Signed-off-by: Iliya Iliev <iliyailiev3592@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05drm/vmwgfx: Use the standard atomic helpers for page-flipThomas Hellstrom
Our wrappers don't do anything useful anymore except calling the atomic helpers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-12-05drm/vmwgfx: Remove set but not used variable 'file_priv'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/vmwgfx/vmwgfx_fence.c: In function 'vmw_event_fence_action_seq_passed': drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:909:19: warning: variable 'file_priv' set but not used [-Wunused-but-set-variable] struct drm_file *file_priv; It not used any more since commit fb740cf2492c ("drm: Create drm_send_event helpers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-12-05drm/vmwgfx: remove redundant return ret statementColin Ian King
The return statement is redundant as there is a return statement immediately before it so we have dead code that can be removed. Also remove the unused declaration of ret. Detected by CoverityScan, CID#1473793 ("Structurally dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
generated by cgit (git 2.34.1) at 2025-09-18 12:08:14 +0000