summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-13batman-adv: use shorter pr_warn instead of pr_warningSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-13batman-adv: refactor window_protected to avoid unnecessary return statementMarek Lindner
Reported-by: David Laight <David.Laight@aculab.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-13batman-adv: prepare lq_update_lock to be shared among different protocolsMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-13batman-adv: improve unicast packet (re)routingAntonio Quartulli
In case of a client X roaming from a generic node A to another node B, it is possible that a third node C gets A's OGM but not B's. At this point in time, if C wants to send data to X it will send a unicast packet destined to A. The packet header will contain A's last ttvn (C got A's OGM and so it knows it). The packet will travel towards A without being intercepted because the ttvn contained in its header is the newest for A. Once A will receive the packet, A's state will not report to be in a "roaming phase" (because, after a roaming, once A sends out its OGM, all the changes are committed and the node is considered not to be in the roaming state anymore) and it will match the ttvn carried by the packet. Therefore there is no reason for A to try to alter the packet's route, thus dropping the packet because the destination client is not there anymore. However, C is well aware that it's routing information towards the client X is outdated as it received an OGM from A saying that the client roamed away. Thanks to this detail, this patch introduces a small change in behaviour: as long as C is in the state of not knowing the new location of client X it will forward the traffic to its last known location using ttvn-1 of the destination. By using an older ttvn node A will be forced to re-route the packet. Intermediate nodes are also allowed to update the packet's destination as long as they have the information about the client's new location. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-13batman-adv: avoid skb_linearise() if not neededAntonio Quartulli
Whenever we want to access headers only, we do not need to linearise the whole packet. Instead we can use pskb_may_pull() Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-13ARM: PCI: provide a default bus scan implementationRussell King
Most PCI implementations perform simple root bus scanning. Rather than having each group of platforms provide a duplicated bus scan function, provide the PCI configuration ops structure via the hw_pci structure, and call the root bus scanning function from core ARM PCI code. Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13ARM: PCI: get rid of pci_std_swizzle()Russell King
Most PCI implementations use the standard PCI swizzle function, which handles the well defined behaviour of PCI-to-PCI bridges which can be found on cards (eg, four port ethernet cards.) Rather than having almost every platform specify the standard swizzle function, make this the default when no swizzle function is supplied. Therefore, a swizzle function only needs to be provided when there is something exceptional which needs to be handled. This gets rid of the swizzle initializer from 47 files, and leaves us with just two platforms specifying a swizzle function: ARM Integrator and Chalice CATS. Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13ARM: PCI: versatile: fix PCI interrupt setupRussell King
This is at odds with the documentation in the file; it says pin 1 on slots 24,25,26,27 map to IRQs 27,28,29,30, but the function will always be entered with slot=0 due to the lack of swizzle function. Fix this function to behave as the comments say, and use the standard PCI swizzle. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13ARM: PCI: integrator: use common PCI swizzleRussell King
The Integrator swizzle function is almost the same as the standard PCI swizzle, except for an initial check for pin = 0. Make the integrator swizzle function a wrapper around the standard PCI swizzle function so we preseve this behaviour while using common code. [fix to use pci_std_swizzle from Linus Walleij] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13regulator: tps62360: add dt supportLaxman Dewangan
Add dt support for the pmu device tps62360 and Add binding documentation with example. With this patch driver will support both device-tree and non-device tree registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13regulator: tps62360: make init_data of platform data to pointer.Laxman Dewangan
Convert platform data member regulator_init_data to pointer type. This will avoid the copy of entire regualator init data into platform data member when adding dt support and it can be achieve by simple assignment: pdata->init_data = of_get_regulator_init_data(dev, dev->of_node); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12Merge branch 'next/cleanup-samsung' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim: "Mostly it is using common macro to define resources and clean up useless codes." * 'next/cleanup-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (34 commits) ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ARM: S3C64XX: Use common macro to define resources on mach-smdk6410.c ARM: S3C64XX: Use common macro to define resources on mach-real6410.c ARM: S3C64XX: Use common macro to define resources on mach-mini6410.c ARM: S3C64XX: Use common macro to define resources on mach-crag6410.c ARM: S3C64XX: Use common macro to define resources on mach-anw6410.c ARM: S3C64XX: Use common macro to define resources on dev-uart.c ARM: S3C64XX: Use common macro to define resources on dev-audio.c ARM: S3C24XX: Use common macro to define resources on simtec-nor.c ARM: S3C24XX: Use common macro to define resources on mach-vr1000.c ARM: S3C24XX: Use common macro to define resources on mach-tct_hammer.c ARM: S3C24XX: Use common macro to define resources on mach-rx1950.c ARM: S3C24XX: Use common macro to define resources on mach-otom.c ARM: S3C24XX: Use common macro to define resources on mach-nexcoder.c ...
2012-05-12Merge branch 'board' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards * 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM: mach-shmobile: bonito: make sure static function ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 images ARM: mach-shmobile: mackerel: Add FSI DMAEngine support
2012-05-12etherdevice: Remove now unused compare_ether_addr_64bitsJoe Perches
Move and invert the logic from the otherwise unused compare_ether_addr_64bits to ether_addr_equal_64bits. Neaten the logic in is_etherdev_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12Merge tag 'ux500-gpio-pins-for-3.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/pinctrl ux500 GPIO and pinctrl changes for kernel 3.5 * tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver pinctrl: add sleep state definition pinctrl/nomadik: implement pin configuration pinctrl/nomadik: implement pin multiplexing pinctrl/nomadik: reuse GPIO debug function for pins pinctrl/nomadik: break out single GPIO debug function pinctrl/nomadik: basic Nomadik pinctrl interface pinctrl/nomadik: !CONFIG_OF build error gpio: move the Nomadik GPIO driver to pinctrl Context conflicts resolved in drivers/pinctrl/Kconfig and drivers/pinctrl/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-12Linux 3.4-rc7v3.4-rc7Linus Torvalds
.. and this should hopefully be the last -rc before final 3.4 release.
2012-05-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC fixes from Olof Johansson: "I was hoping to be done with fixes for 3.4 but we got two branches from subarch maintainers the last couple of days. So here is one last(?) pull request for arm-soc containing 7 patches: - Five of them are for shmobile dealing with SMP setup and compile failures - The remaining two are for regressions on the Samsung platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull a few more GPIO bug fixes from Grant Likely: "Oops, missed a couple. Here's an updated pull req for GPIO" A set of PCH bug fixes, and one patch to fix up compile warnings * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers
2012-05-12Merge branch 'v3.4-samsung-fixes-5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board
2012-05-13ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1Kukjin Kim
It should be (1 << 2) for ctrlbit of exynos5_clk_pdma1. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: EXYNOS: use s5p-timer for UniversalC210 boardMarek Szyprowski
Commit 069d4e743 ("ARM: EXYNOS4: Remove clock event timers using ARM private timers") removed support for local timers and forced to use MCT as event source. However MCT is not operating properly on early revision of EXYNOS4 SoCs. All UniversalC210 boards are based on it, so that commit broke support for it. This patch provides a workaround that enables UniversalC210 boards to boot again. s5p-timer is used as an event source, it works only for non-SMP builds. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes By Guennadi Liakhovetski (2) and others via Rafael J. Wysocki: "[...] urgent fixes for Renesas ARM-based platforms. Four of these commits are fixes of regressions new in 3.4-rc and the last one is necessary for SMP to work on those systems in general." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
2012-05-12sparc32: Pass -mcpu=v7 explicitly to gcc.David S. Miller
We should be agnostic to what gcc happens to be generating by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13Merge branch 'next/cleanup-samsung-macro' into next/cleanup-samsungKukjin Kim
2012-05-13ARM: S3C24XX: Use common macro to define resources on mach-qt2410.cTushar Behera
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13ARM: S3C24XX: Use common macro to define resources on mach-osiris.cTushar Behera
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12Merge branch 'spear/pinctrl' into next/pinctrlArnd Bergmann
* spear/pinctrl: pinctrl: (cosmetic) fix two entries in DocBook comments pinctrl: add more info to error msgs in pin_request CLKDEV: provide helpers for common clock framework pinctrl: add pinctrl-mxs support pinctrl: pinctrl-imx: add imx6q pinctrl driver pinctrl: pinctrl-imx: add imx pinctrl core driver dt: add of_get_child_count helper function pinctrl: support gpio request deferred probing pinctrl: add pinctrl_provide_dummies interface for platforms to use pinctrl: enhance reporting of errors when loading from DT pinctrl: add kerneldoc for pinctrl_ops device tree functions pinctrl: propagate map validation errors pinctrl: fix dangling comment pinctrl: fix signed vs unsigned conditionals inside pinmux_map_to_setting ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get() This just adds more dependencies that are required in order not to break the spear pinctrl support. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12sparc32: Un-btfixup more PTE constants and PTE ops.David S. Miller
pte_{filei,wrprotecti,mkcleani,mkoldi} pte_{mkwrite,mkdirty,mkyoung} Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: Un-btfixup pte_{write,dirty,young}iDavid S. Miller
And we can certainly get rid of the const function attributes, there is no way that's needed any longer and no other arch uses this kind of annotation here. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: drop unused code in process_32Sam Ravnborg
It is commented out using #ifdef 0 / #endif, and has been so for a long time. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: Un-btfixup set_pte, pte_present, mk_pte{_phys,_io}().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12Merge branch 'renesas-kzm9g' into renesas-board-newRafael J. Wysocki
* renesas-kzm9g: ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3 ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support ARM: mach-shmobile: kzm9g: add LCDC support ARM: mach-shmobile: kzm9g: add external USB Host support ARM: mach-shmobile: kzm9g: add SMSC 9221 support ARM: mach-shmobile: kzm9g: add defconfig ARM: mach-shmobile: add KZM-A9-GT board support Conflicts: arch/arm/mach-shmobile/Makefile
2012-05-12ARM: mach-shmobile: kzm9g: enable SMP bootKuninori Morimoto
Update the KZM9G defconfig and the code in platsmp.c to support SMP on the sh73a0 based KZM9G board. Also fix up the earlyprintk setting that was previously incorrect. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: defconfig updateKuninori Morimoto
This patch enable GPIO-KEY/FSI, and remove debug settings, and be cleanuped by c2330e286f68f1c408b4aa6515ba49d57f05beae script Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add PCF8757 gpio-keyKuninori Morimoto
This patch adds extra GPIO via PCF8757 chip, and use it as gpio-key. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add SDHI supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add MMCIF supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: correct screen directionKuninori Morimoto
The correct screen direction of KZM9G board needs PORT226/SC settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: sh73a0.h: add GPIO_NRKuninori Morimoto
GPIO_NR is added in order to clarify end of GPIO array. We can add extra GPIO from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3Kuninori Morimoto
MSEL2CR MSEL18 should be 1 if I2C-3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add LCDC supportKuninori Morimoto
AS3711 chip initalization is required for enabling LCDC backlight, but there is no driver for this chip. So, this patch sends its settings when boot. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add external USB Host supportKuninori Morimoto
This patch uses r8a66597_hcd driver, since renesas_usbhs driver doesn't support external R8A66597 chip. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add SMSC 9221 supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add defconfigKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: add KZM-A9-GT board supportKuninori Morimoto
This adds very basic KZM-A9-GT board (SH73a0) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: defconfig updateKuninori Morimoto
This patch enable USBFunc/SHDI/MMCIF, remove debug settings, and cleanuped by c2330e286f68f1c408b4aa6515ba49d57f05beae script Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: clock-r8a7740: add sh-eth clockKuninori Morimoto
armadillo800eva board is using sh-eth, but clock-r8a7740 didn't care it. This clock was enabled by boot-loader. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame bufferKuninori Morimoto
The default 2MB size of DMA coherent memory isn't enough for allocate frame buffer memory. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add MMCIF supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit (git 2.34.1) at 2025-09-19 16:08:39 +0000