summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-03parisc: add KGDB supportSven Schnelle
This patch add KGDB support to PA-RISC. It also implements single-stepping utilizing the recovery counter. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add parisc code patchingSven Schnelle
Instead of re-mapping the whole kernel text with RWX rights add a patch_text() which can be used to replace instructions in the kernel .text section. Based on the ARM implementation. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add set_fixmap()/clear_fixmap()Sven Schnelle
These functions will be used for adding code patching functions later. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Consider stack randomization for mmap base only when necessaryAlexandre Ghiti
Do not offset mmap base address because of stack randomization if current task does not want randomization. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03i40e: Introduce recovery mode supportAlice Michael
This patch introduces "recovery mode" to the i40e driver. It is part of a new Any2Any idea of upgrading the firmware. In this approach, it is required for the driver to have support for "transition firmware", that is used for migrating from structured to flat firmware image. In this new, very basic mode, i40e driver must be able to handle particular IOCTL calls from the NVM Update Tool and run a small set of AQ commands. These additional AQ commands are part of the interface used by the NVMUpdate tool. The NVMUpdate tool contains all of the necessary logic to reference these new AQ commands. The end user experience remains the same, they are using the NVMUpdate tool to update the NVM contents. Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: print PCI vendor and device ID during probeStefan Assmann
Printing each devices PCI vendor and device ID has the advantage of easily revealing what hardware we're dealing with exactly. It's no longer necessary to match the PCI bus information to the lspci output. Helps with bug reports where no lspci output is available. Output before i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 and after i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: fix misleading message about promisc setting on un-trusted VFHarshitha Ramamurthy
A refactor of the i40e_vc_config_promiscuous_mode_msg function moved the check for un-trusted VF into another function. We have to lie to an un-trusted VF that its request to set promiscuous mode is successful even when it is not because we don't want the VF to find out its trust status this way. With the refactor, we were running into a case where even though we were not setting promiscuous mode for an un-trusted VF, we still printed a misleading message that it was successful. This patch fixes that by ensuring that a success message is printed on the host side only when the promiscuous mode change has been successful. Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: update version numberAlice Michael
Just bumping the version number appropriately. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove out-of-range comparisons in i40e_validate_cloud_filterJacob Keller
The function i40e_validate_cloud_filter checks that the destination and source port numbers are valid by attempting to ensure that the number is non-zero and no larger than 0xFFFF. However, the types for the dst_port and src_port variable are __be16 which by definition cannot be larger than 0xFFFF Since these values cannot be larger than 2 bytes, the check to see if they exceed 0xFFFF is meaningless. One might consider these checks as some sort of defensive coding, in case the type was later changed. However, these checks also byte-swap the value before comparison using be16_to_cpu, which will truncate the values to 16bits anyways. Additionally, changing the type would require updating the opcodes to support new data layout of these virtchnl commands. Remove the check to silence the -Wtype-limits warning that was added to GCC 8. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Report advertised link modes on 40GBase_LR4, CR4 and fibreAdam Ludkiewicz
Add assignments for advertising 40GBase_LR4, 40GBase_CR4 and fibre Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: ShadowRAM checksum calculation changeMaciej Paczkowski
Due to changes in FW the SW is required to perform double SR dump in some cases. Implementation adds two new steps to update nvm checksum function: * recalculate checksum and check if checksum in NVM is correct * if checksum in NVM is not correct then update it again Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove error msg when vf with port vlan tries to remove vlan 0Aleksandr Loktionov
VF's attempt to delete vlan 0 when a port vlan is configured is harmless in this case pf driver just does nothing. If vf will try to remove other vlans when a port vlan is configured it will still produce error as before. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: change behavior on PF in response to MDD eventCarolyn Wyborny
TX MDD events reported on the PF are the result of the PF misconfiguring a descriptor and not because of "bad actions" by anything else. No need to reset now because if it results in a Tx hang, the Tx hang check will take care of it. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Fix for allowing too many MDD events on VFCarolyn Wyborny
This patch changes the driver behavior when detecting a VF MDD event. It now disables the VF after one event, which indicates a hw detected problem in the VF. Before this change, the PF would allow a couple of events before doing the reset. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03drm/panfrost: Show stored feature registersRobin Murphy
Re-reading the feature registers for the sake of displaying the raw values seems pointless, and in fact showing the copies that we've already read and stored is arguably more useful in terms of giving exposure to any potential bugs in that part of the process. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ce5e414adb008baeed9e2ceb9c88f28d5c74ea42.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Don't scream about deferred probeRobin Murphy
Probe deferral is far from "fatal". Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/b6ff1f18ac0612f29fd2e3336d6663b7e02db572.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Disable PM on probe failureRobin Murphy
Make sure to disable runtime PM again if probe fails after we've enabled it. Otherwise, any subsequent attempt to re-probe starts triggering "Unbalanced pm_runtime_enable!" assertions from the driver core. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/2487391e7646cabbc52e9b4c20182e39d3f61859.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Set DMA masks earlierRobin Murphy
The DMA masks need to be set correctly before any DMA API activity kicks off, and the current point in panfrost_probe() is way too late in that regard. since panfrost_mmu_init() has already set up a live address space and DMA-mapped MMU pagetables. We can't set masks until we've queried the appropriate value from MMU_FEATURES, but as soon as reasonably possible after that should suffice. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/64361b929a5c61d2ab9580262ecb3d369164cfcb.1556195258.git.robin.murphy@arm.com
2019-05-03drm/panfrost: Add sanity checks to submit IOCTLTomeu Vizoso
So userspace can get feedback on any error conditions, instead of going ahead and things breaking later. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424131355.62817-1-tomeu.vizoso@collabora.com
2019-05-03hwmon: (lm75) Add support for TMP75BIker Perez del Palomar Sustatxa
The TMP75B has a different control register, supports 12-bit resolution and the default conversion rate is 37 Hz. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-03power: supply: Add driver for Microchip UCS1002Andrey Smirnov
Add driver for Microchip UCS1002 Programmable USB Port Power Controller with Charger Emulation. The driver exposed a power supply device to control/monitor various parameter of the device as well as a regulator to allow controlling VBUS line. Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03dt-bindings: power: supply: Add bindings for Microchip UCS1002Andrey Smirnov
Add bindings for Microchip UCS1002 Programmable USB Port Power Controller with Charger Emulation. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Rob Herring <robh+dt@kernel.org> Cc: Enric Balletbo Serra <enric.balletbo@collabora.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constantAndrey Smirnov
Add POWER_SUPPLY_HEALTH_OVERCURRENT constant in order to allow singalling overcurrent condition via power supply health information. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Enric Balletbo Serra <enric.balletbo@collabora.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03dt-bindings: hwmon: Add tmp75b to lm75.txtIker Perez del Palomar Sustatxa
Update the LM75's devicetree definition to allow Texas Instruments TMP75B be probed. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-03Merge panfrost-fixes into drm-misc-next-fixesSean Paul
Merging some panfrost fixes as well as one rockchip fix that _just_ missed feature freeze. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-05-03livepatch: Remove duplicated code for early initializationPetr Mladek
kobject_init() call added one more operation that has to be done when doing the early initialization of both static and dynamic livepatch structures. It would have been easier when the early initialization code was not duplicated. Let's deduplicate it for future generations of livepatching hackers. The patch does not change the existing behavior. Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03livepatch: Remove custom kobject state handlingPetr Mladek
kobject_init() always succeeds and sets the reference count to 1. It allows to always free the structures via kobject_put() and the related release callback. Note that the custom kobject state handling was used only because we did not know that kobject_put() can and actually should get called even when kobject_init_and_add() fails. The patch should not change the existing behavior. Suggested-by: "Tobin C. Harding" <tobin@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C driver bugfixes and a MAINTAINERS update for you" * 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Prevent runtime suspend of adapter when Host Notify is required i2c: synquacer: fix enumeration of slave devices MAINTAINERS: friendly takeover of i2c-gpio driver i2c: designware: ratelimit 'transfer when suspended' errors i2c: imx: correct the method of getting private data in notifier_call
2019-05-03orangefs: truncate before updating sizeMartin Brandenburg
Otherwise we race with orangefs_writepage/orangefs_writepages which and does not expect i_size < page_offset. Fixes xfstests generic/129. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: copy Orangefs-sized blocks into the pagecache if possible.Mike Marshall
->readpage looks in file->private_data to try and find out how the userspace program set "count" in read(2) or with "dd bs=" or whatever. ->readpage uses "count" and inode->i_size to calculate how much data Orangefs should deposit in the Orangefs shared buffer, and remembers which slot the data is in. After copying data from the Orangefs shared buffer slot into "the page", readpage tries to increment through the pagecache index and fill as many pages as it can from the extra data in the shared buffer. Hopefully these extra pages will soon be needed by the vfs, and they'll be in the pagecache already. Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03orangefs: pass slot index back to readpage.Mike Marshall
When userspace deposits more than a page of data into the shared buffer, we'll need to know which slot it is in when we get back to readpage so that we can try to use the extra data to fill some extra pages. Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03orangefs: remember count when reading.Mike Marshall
Orangefs wins when it can do IO on large (up to four meg) blocks at a time, and looses when it has to do tiny "small io" reads and writes. Accessing Orangefs through the pagecache with the kernel module helps with small io, both reading and writing, a great deal. Readpage generally tries to fetch a page (four k) at a time. We'll let users use "count" (as in read(2) or pread(2) for example) as a knob to control how much data they get from Orangefs at a time and we'll try to use the data to fill extra pagecache pages when we get to ->readpage, hopefully resulting in fewer calls to readpage and Orangefs userspace. We need a way to remember how they set count so that we can still have it available when we get to ->readpage. - We'll use file->private_data to keep track of "count". We'll wrap generic_file_open with orangefs_file_open and initialize private_data to NULL there. - In ->read_iter we have access to both "count" and file, so we'll kmalloc some space onto file->private_data and store "count" there. - We'll kfree file->private_data each time we visit ->flush and reinitialize it to NULL. Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03orangefs: add orangefs_revalidate_mappingMartin Brandenburg
This is modeled after NFS, except our method is different. We use a simple timer to determine whether to invalidate the page cache. This is bound to perform. This addes a sysfs parameter cache_timeout_msecs which controls the time between page cache invalidations. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: implement writepagesMartin Brandenburg
Go through pages and look for a consecutive writable region. After finding a number of consecutive writable pages or when finding that the next page's dirty range is not contiguous and cannot be written as one request, send the write to the server. The number of pages is determined by the client-core's buffer size. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: write range trackingMartin Brandenburg
Attach the actual range of bytes written to plus the responsible uid/gid to each dirty page. This information must be sent to the server when the page is written out. Now write_begin, page_mkwrite, and invalidatepage keep up with this information. There are several conditions where they must write out the page immediately to store the new range. Two non-contiguous ranges cannot be stored on a single page. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: avoid fsync service operation on flushMartin Brandenburg
Without this, an fsync call is sent to the server even if no data changed. This resulted in a rather severe (50%) performance regression under certain metadata-heavy workloads. In the past, everything was direct IO. Nothing happend on a close call. An explicit fsync call would send an fsync request to the server which in turn fsynced the underlying file. Now there are cached writes. Then fsync began writing out dirty pages in addition to making an fsync request to the server, and close began calling fsync. With this commit, close only writes out dirty pages, and does not make the fsync request. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: skip inode writeout if nothing to writeMartin Brandenburg
Would happen if an inode is dirty but whatever happened is not something that can be written out to OrangeFS. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: move do_readv_writev to direct_IOMartin Brandenburg
direct_IO was the only caller and all direct_IO did was call it, so there's no use in having the code spread out into so many functions. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: do not return successful read when the client-core disappearedMartin Brandenburg
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: implement writepageMartin Brandenburg
Now orangefs_inode_getattr fills from cache if an inode has dirty pages. also if attr_valid and dirty pages and !flags, we spin on inode writeback before returning if pages still dirty after: should it be other way Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: migrate to generic_file_read_iterMartin Brandenburg
Remove orangefs_inode_read. It was used by readpage. Calling wait_for_direct_io directly serves the purpose just as well. There is now no check of the bufmap size in the readpage path. There are already other places the bufmap size is assumed to be greater than PAGE_SIZE. Important to call truncate_inode_pages now in the write path so a subsequent read sees the new data. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: service ops done for writeback are not killableMartin Brandenburg
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: remove orangefs_readpagesMartin Brandenburg
It's a copy of the loop which would run in read_pages from mm/readahead.c. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: reorganize setattr functions to track attribute changesMartin Brandenburg
OrangeFS accepts a mask indicating which attributes were changed. The kernel must not set any bits except those that were actually changed. The kernel must set the uid/gid of the request to the actual uid/gid responsible for the change. Code path for notify_change initiated setattrs is orangefs_setattr(dentry, iattr) -> __orangefs_setattr(inode, iattr) In kernel changes are initiated by calling __orangefs_setattr. Code path for writeback is orangefs_write_inode -> orangefs_inode_setattr attr_valid and attr_uid and attr_gid change together under i_lock. I_DIRTY changes separately. __orangefs_setattr lock if needs to be cleaned first, unlock and retry set attr_valid copy data in unlock mark_inode_dirty orangefs_inode_setattr lock copy attributes out unlock clear getattr_time # __writeback_single_inode clears dirty orangefs_inode_getattr # possible to get here with attr_valid set and not dirty lock if getattr_time ok or attr_valid set, unlock and return unlock do server operation # another thread may getattr or setattr, so check for that lock if getattr_time ok or attr_valid, unlock and return else, copy in update getattr_time unlock Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: let setattr write to cached inodeMartin Brandenburg
This is a fairly big change, but ultimately it's not a lot of code. Implement write_inode and then avoid the call to orangefs_inode_setattr within orangefs_setattr. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: set up and use backing_dev_infoMartin Brandenburg
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: hold i_lock during inode_getattrMartin Brandenburg
This should be a no-op now. When inode writeback works, this will prevent a getattr from overwriting inode data while an inode is transitioning to dirty. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: update attributes rather than relying on serverMartin Brandenburg
This should be a no-op now, but once inode writeback works, it'll be necessary to have the correct attribute in the dirty inode. Previously the attribute fetch timeout was marked invalid and the server provided the updated attribute. When the inode is dirty, the server cannot be consulted since it does not yet know the pending setattr. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03orangefs: simplify orangefs_inode_getattr interfaceMartin Brandenburg
No need to store the received mask. It is either STATX_BASIC_STATS or STATX_BASIC_STATS & ~STATX_SIZE. If STATX_SIZE is requested, the cache is bypassed anyway, so the cached mask is unnecessary to decide whether to do a real getattr. This is a change. Previously a getattr would want size and use the cached size. All of the in-kernel callers that wanted size did not want a cached size. Now a getattr cannot use the cached size if it wants size at all. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
generated by cgit (git 2.34.1) at 2025-09-23 12:58:08 +0000