summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-14mfd: axp20x: Allow the AXP223 to be probed by I2CMaxime Ripard
The AXP223 can be used both using the RSB proprietary bus, or a more traditional I2C bus. The RSB is a faster bus and provides more features (like some integrity checks on the messages), so it's usually preferrable to use it, but since it's proprietary, when we want to use the PMIC in a multi-master setup, the i2c might make sense as well. Let's add that possibility. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: rk808: Remove the id_tableTony Xie
Remove the id_table because it's not used. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate properly CrOS ISH MCU deviceRushikesh S Kadam
Integrated Sensor Hub (ISH) is also a MCU running EC having feature bit EC_FEATURE_ISH. Instantiate it as a special CrOS EC device with device name 'cros_ish'. Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: Add bindings for SAM9X60 HLCD controllerClaudiu Beznea
Add new compatible string for the HLCD controller on SAM9X60 SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: atmel-hlcdc: Add compatible for SAM9X60 HLCD controllerClaudiu Beznea
Add compatible for SAM9X60 HLCD controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: Kconfig: Pedantic formattingEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Add USB power supply mfd cell to AXP813Quentin Schulz
The AXP813 has a VBUS power input. Now that the axp20x_usb_power driver supports this variant, we can add an mfd cell for it to use it. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> [wens@csie.org: add commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: twl6040: Fix device init errors for ACCCTL registerTony Lindgren
I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: syscon: Add optional clock supportFabrice Gasnier
Some system control registers need to be clocked, so the registers can be accessed. Add an optional clock and attach it to regmap. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: stm32: syscon: Add clock supportFabrice Gasnier
STM32 system configuration controller registers needs to be clocked. Document clock support on stm32-syscon. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sec: Add support for the RTC on S2MPA01Stuart Menefy
The RTC portion of the S2MPA01 appears to have the same register layout as the S2MPS14. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sec: Put one element structure initialisation on one lineStuart Menefy
Change the layout of the initialisation of structures with one element to a single line of code. This keeps the coding style consistent. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel_soc_pmic_chtwc: Register LED child deviceYauhen Kharuzhy
Add MFD cell for LEDs driver to the Intel Cherry Trail Whiskey Cove PMIC mfd device driver. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones
'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
2019-05-14perf/x86/intel: Allow PEBS multi-entry in watermark modeStephane Eranian
This patch fixes a restriction/bug introduced by: 583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") The original patch prevented using multi-entry PEBS when wakeup_events != 0. However given that wakeup_events is part of a union with wakeup_watermark, it means that in watermark mode, PEBS multi-entry is also disabled which is not the intent. This patch fixes this by checking is watermark mode is enabled. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Cc: kan.liang@intel.com Cc: vincent.weaver@maine.edu Fixes: 583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS") Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-14drm/nouveau: fix duplication of nv50_head_atom structPeteris Rudzusiks
nv50_head_atomic_duplicate_state() makes a copy of nv50_head_atom struct. This patch adds copying of struct member named "or", which previously was left uninitialized in the duplicated structure. Due to this bug, incorrect nhsync and nvsync values were sometimes used. In my particular case, that lead to a mismatch between the output resolution of the graphics device (GeForce GT 630 OEM) and the reported input signal resolution on the display. xrandr reported 1680x1050, but the display reported 1280x1024. As a result of this mismatch, the output on the display looked like it was cropped (only part of the output was actually visible on the display). git bisect pointed to commit 2ca7fb5c1cc6 ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head"), which added the member "or" to nv50_head_atom structure, but forgot to copy it in nv50_head_atomic_duplicate_state(). Fixes: 2ca7fb5c1cc6 ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head") Signed-off-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-14drm/nouveau/disp/dp: respect sink limits when selecting failsafe link ↵Ben Skeggs
configuration Where possible, we want the failsafe link configuration (one which won't hang the OR during modeset because of not enough bandwidth for the mode) to also be supported by the sink. This prevents "link rate unsupported by sink" messages when link training fails. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-14drm/nouveau/core: initial support for boards with TU117 chipsetBen Skeggs
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing graphics/compute bring-up. Each subsystem was compared with traces, along with various tests to check that things generally work as they should, and appears compatible enough with the current TU106 code to enable support. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-14drm/nouveau/core: allow detected chipset to be overriddenBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-14drm/nouveau/kms/gf119-gp10x: push HeadSetControlOutputResource() mthd when ↵Ben Skeggs
encoders change HW has error checks in place which check that pixel depth is explicitly provided on DP, while HDMI has a "default" setting that we use. In multi-display configurations with identical modelines, but different protocols (HDMI + DP, in this case), it was possible for the DP head to get swapped to the head which previously drove the HDMI output, without updating HeadSetControlOutputResource(), triggering the error check and hanging the core update. Reported-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-14drm/nouveau/kms/nv50-: fix bug preventing non-vsync'd page flipsBen Skeggs
Accidentally introduced during Volta bring-up. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-14drm/nouveau/kms/gv100-: fix spurious window immediate interlocksBen Skeggs
Cursor position updates were accidentally causing us to attempt to interlock window with window immediate, and without a matching window immediate update, NVDisplay could hang forever in some circumstances. Fixes suspend/resume on (at least) Quadro RTX4000 (TU104). Reported-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-13drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1Amit Kucheria
8974 and 8916 have the same version of the TSENS IP. Merge the files to allow for better code reuse. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974Amit Kucheria
Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix them with 8916 to avoid the clash so we can merge the two files. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974Amit Kucheria
8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare it for merging with tsens-8974 in a later commit. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Function prototypes should have argument namesAmit Kucheria
check_patch complains a lot as follows: WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name + int (*init)(struct tsens_priv *); Fix it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Use consistent names for variablesAmit Kucheria
tsens_get_temp() uses the name 'data' for the void pointer, use the same in tsens_get_trend() for consistency. Remove a stray space while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename variable tmdevAmit Kucheria
tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_deviceAmit Kucheria
Rename to tsens_priv to denote that it is private data for each tsens instance. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_dataAmit Kucheria
Rename to tsens_plat_data to denote that it is platform-data passed in at compile-time. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Document the data structuresAmit Kucheria
Describe how the TSENS device and the various sensors connected to it are described in the driver Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: stm32: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13of: thermal: Improve print informationYangtao Li
Define pr_fmt macro to add a prefix to the message, this can make the thermal log better recognized. Before: [ 0.602672] nfc: nfc_init: NFC Core ver 0.1 [ 0.602828] NET: Registered protocol family 39 [ 0.603435] clocksource: Switched to clocksource mct-frc [ 0.746216] failed to build thermal zone cpu-thermal: -22 [ 0.746451] NET: Registered protocol family 2 After: [ 0.602804] NET: Registered protocol family 39 [ 0.603463] clocksource: Switched to clocksource mct-frc [ 0.746309] thermal_sys: failed to build thermal zone cpu-thermal: -22 [ 0.746545] NET: Registered protocol family 2 Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: enable OC hw throttleWei Ni
Parse Over Current settings from DT and program them to generate interrupts. Also enable hw throttling whenever there are OC events. Log the OC events as debug messages. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13of: Add bindings of OC hw throttle for Tegra socthermWei Ni
Add OC HW throttle configuration for soctherm in DT. It is used to describe the OCx throttle events. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for EDP IRQWei Ni
Add support to generate OC (over-current) interrupts to indicate the OC event and print out alarm messages. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add set_trips functionalityWei Ni
Implement set_trips ops to set passive trip points. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for thermal IRQWei Ni
Support to generate an interrupt when the temperature crosses a programmed threshold and notify the thermal framework. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for gpu hw-throttleWei Ni
Add support to trigger pulse skippers on the GPU when a HOT trip point is triggered. The pulse skippers can be signalled to throttle at low, medium and high depths\levels. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13of: Add bindings of gpu hw throttle for Tegra socthermWei Ni
Add "nvidia,gpu-throt-level" property to set gpu hw throttle level. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: support hw and sw shutdownWei Ni
Currently the critical trip points in thermal framework are the only way to specify a temperature at which HW should shutdown. This is insufficient for certain platforms which would want an orderly software shutdown in addition to HW shutdown. This change support to parse "nvidia, thermtrips" property, it allows soctherm DT to specify thermtrip temperatures so that critical trip points framework can be used for doing software shutdown. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13of: Add bindings of thermtrip for Tegra socthermWei Ni
Add optional property "nvidia,thermtrips". If present, these trips will be used as HW shutdown trips, and critical trips will be used as SW shutdown trips. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM deviceCédric Le Goater
There is no need to test for the device pointer validity when releasing a KVM device. The file descriptor should identify it safely. Fixes: 2bde9b3ec8bd ("KVM: Introduce a 'release' method for KVM devices") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-05-14KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing"Colin Ian King
There is a spelling mistake in a pr_err message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-05-14KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUsPaul Mackerras
Commit 70ea13f6e609 ("KVM: PPC: Book3S HV: Flush TLB on secondary radix threads", 2019-04-29) aimed to make radix guests that are using the real-mode entry path load the LPID register and flush the TLB in the same place where those things are done for HPT guests. However, it omitted to remove a branch which branches around that code for radix guests. The result is that with indep_thread_mode = N, radix guests don't run correctly. (With indep_threads_mode = Y, which is the default, radix guests use a different entry path.) This removes the offending branch, and also the load and compare that the branch depends on, since the cr7 setting is now unused. Reported-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Fixes: 70ea13f6e609 ("KVM: PPC: Book3S HV: Flush TLB on secondary radix threads") Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-05-13RDMA/core: Change system parameters callback from dumpit to doitParav Pandit
.dumpit() callback is used for returning same type of data in the loop, e.g. loop over ports, resources, devices. However system parameters are general and standalone for whole subsystem. It means that getting system parameters should be doit callback. Fixes: cb7e0e130503 ("RDMA/core: Add interface to read device namespace sharing mode") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-13RDMA: Directly cast the sockaddr union to sockaddrJason Gunthorpe
gcc 9 now does allocation size tracking and thinks that passing the member of a union and then accessing beyond that member's bounds is an overflow. Instead of using the union member, use the entire union with a cast to get to the sockaddr. gcc will now know that the memory extends the full size of the union. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-13Merge branch 'pci/trivial'Bjorn Helgaas
- Cleanup PCI register definitions, typos, etc (Bjorn Helgaas) - Remove unnecessary use of user-space types in CPER (Bjorn Helgaas) - Cleanup setup-bus.c comments & whitespace (Nicholas Johnson) * pci/trivial: PCI: Cleanup setup-bus.c comments and whitespace CPER: Remove unnecessary use of user-space types CPER: Add UEFI spec references PCI: Fix comment typos PCI: Cleanup register definition width and whitespace # Conflicts: # drivers/pci/pci.c # drivers/pci/setup-bus.c
2019-05-13Merge branch 'pci/printk-portdrv'Bjorn Helgaas
- Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR (Frederick Lawler) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) * pci/printk-portdrv: PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
generated by cgit (git 2.34.1) at 2025-09-13 22:07:55 +0000