summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-12phy: micrel: Use MICREL_PHY_ID_MASK definitionFabio Estevam
Replace the hardcoded mask 0x00fffff0 with MICREL_PHY_ID_MASK for better readability. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12gre: Fix wrong tpi->proto in WCCPHaishuang Yan
When dealing with WCCP in gre6 tunnel, it sets the wrong tpi->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12ip6_gre: Fix get_size calculation for gre6 tunnelHaishuang Yan
Do not include attribute IFLA_GRE_TOS. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12ARM: dts: igep0020: Add SD card write-protect pin.Enric Balletbo i Serra
A host device that supports write protection should refuse to write to an SD card that is designated read-only when write-protect is set. This is an optional feature of the SD specification. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: igep00x0: Add SD card-detect.Enric Balletbo i Serra
Fix SD card remove/insert detection by adding the correct card-detect pin. All IGEP OMAP3 based boards use the same card-detect pin. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: OMAP2+: AM43XX: Enable fixes for Cortex-A9 errataDave Gerlach
This patch explicitly enables the fixes for the below errata applicable for AM43x Socs as was done for OMAP4. 754322: Faulty MMU translations following ASID switch 775420: A data cache maintenance operation which aborts, followed by an ISB, without any DSB in-between, might lead to deadlock Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: am57xx-idk-common: Fix input supply namesNishanth Menon
Palmas Regulator is an exception and does not follow the standard "vin-supply" common definitions for all regulators, as a result of this, the input supplies are not reported to regulator framework, with the obvious result of not being appropriately mapped. Fix the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: dra7: Add gpmc dma channelFranklin S Cooper Jr
Add dma channel information to the gpmc. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: disable mmc by default and enable when needed for dm814xNicolas Chauvet
This patch disable mmc nodes by default in the dm814x.dtsi and enable only when needed on a given dts v2: Disable un-used mmc nodes on the related boards dts files instead of from the included SOC dts Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: Add non-removable to hsmmc on hp-t410Nicolas Chauvet
This will clean-up warnings at boot, since either that or cd-gpio{,s} are mandated by the dts specification of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@47810000[0]' of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@47810000[0]' v2: use the generic non-removable instead of ti,non-removable Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: Fix ldo7 source for HDMI on igepv5Tony Lindgren
Fix ldo7 source for HDMI on igepv5. Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: Fix uart wakeirq on omap5 by removing WAKEUP_EN for omapsTony Lindgren
The padconf register WAKEUP_EN is now handled in a generic way using Linux wakeirqs where pinctrl-single toggles the WAKEUP_EN bit when a wakeirq is enabled or disabled. At least omap5 gets confused if the WAKEUP_EN bit is set and the pin is not claimed as a wakeirq. The end result is that wakeirqs don't work properly as there is nothing handling the wakeirq. So let's just remove the WAKEUP_EN usage from dts files. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12ARM: dts: Fix igepv5 audiopwon-gpioTony Lindgren
Playing audio works on omap5-uevm, but produces an "Unhandled fault: imprecise external abort (0x1406) at 0x00000000" error on igepv5. Looks like the twl6040 audpwron GPIO pin is different for these boards. Let's fix the issue by configuring the audpwron in the board specific dts file. Cc: Agustí Fontquerni <af@iseebcn.com> Cc: Eduard Gavin <egavin@iseebcn.com> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Peter Ujfalusi <peter.ujflausi@ti com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12Merge tag 'keys-fixes-20160512' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring fix from David Howells: "Fix ASN.1 indefinite length object parsing" * tag 'keys-fixes-20160512' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: KEYS: Fix ASN.1 indefinite length object parsing
2016-05-12Merge tag 'sound-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This is a pretty boring pull request as you wish: including a few small and trivial HD-audio and USB-audio quirks and a couple of small regression fixes in HD-audio" * tag 'sound-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Yet another Phoneix Audio device quirk ALSA: hda - Fix regression on ATI HDMI audio ALSA: hda - Fix subwoofer pin on ASUS N751 and N551 ALSA: hda - Fix broken reconfig ALSA: hda - Fix white noise on Asus UX501VW headset ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)
2016-05-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl6040-vibra - fix DT node memory management Input: max8997-haptic - fix NULL pointer dereference Input: byd - update copyright header
2016-05-12perf stat: Fallback to user only counters when perf_event_paranoid > 1Arnaldo Carvalho de Melo
After 0161028b7c8a ("perf/core: Change the default paranoia level to 2") 'perf stat' fails for users without CAP_SYS_ADMIN, so just use 'perf_evsel__fallback()' to have the same behaviour as 'perf record', i.e. set perf_event_attr.exclude_kernel to 1. Now: [acme@jouet linux]$ perf stat usleep 1 Performance counter stats for 'usleep 1': 0.352536 task-clock:u (msec) # 0.423 CPUs utilized 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 49 page-faults:u # 0.139 M/sec 309,407 cycles:u # 0.878 GHz 243,791 instructions:u # 0.79 insn per cycle 49,622 branches:u # 140.757 M/sec 3,884 branch-misses:u # 7.83% of all branches 0.000834174 seconds time elapsed [acme@jouet linux]$ Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b20jmx4dxt5hpaa9t2rroi0o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf evsel: Handle EACCESS + perf_event_paranoid=2 in fallback()Arnaldo Carvalho de Melo
Now with the default for the kernel.perf_event_paranoid sysctl being 2 [1] we need to fall back to :u, i.e. to set perf_event_attr.exclude_kernel to 1. Before: [acme@jouet linux]$ perf record usleep 1 Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The current value is 2: -1: Allow use of (almost) all events by all users >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN [acme@jouet linux]$ After: [acme@jouet linux]$ perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (7 samples) ] [acme@jouet linux]$ perf evlist cycles:u [acme@jouet linux]$ perf evlist -v cycles:u: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 [acme@jouet linux]$ And if the user turns on verbose mode, an explanation will appear: [acme@jouet linux]$ perf record -v usleep 1 Warning: kernel.perf_event_paranoid=2, trying to fall back to excluding kernel samples mmap size 528384B [ perf record: Woken up 1 times to write data ] Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.6.0-rc7+/build/vmlinux for symbols [ perf record: Captured and wrote 0.016 MB perf.data (7 samples) ] [acme@jouet linux]$ [1] 0161028b7c8a ("perf/core: Change the default paranoia level to 2") Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b20jmx4dxt5hpaa9t2rroi0o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12drm/amdgpu: fix DP mode validationAlex Deucher
Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-05-12drm/radeon: fix DP mode validationAlex Deucher
Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-05-12perf evsel: Improve EPERM error handling in open_strerror()Arnaldo Carvalho de Melo
We were showing a hardcoded default value for the kernel.perf_event_paranoid sysctl, now that it became more paranoid (1 -> 2 [1]), this would need to be updated, instead show the current value: [acme@jouet linux]$ perf record ls Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The current value is 2: -1: Allow use of (almost) all events by all users >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN [acme@jouet linux]$ [1] 0161028b7c8a ("perf/core: Change the default paranoia level to 2") Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0gc4rdpg8d025r5not8s8028@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12Merge tag 'pinctrl-v4.6-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fix from Linus Walleij: "A single last pin control fix for v4.6. t's tagged for stable and only hits a single driver with two added lines so should be safe. Tested in linux-next. - The pull up/down logic for the AT91 PIO4 controller was tilted: we need to mask the reverse pull when unmasking a pull direction. Setting both pull up & pull down is illegal and makes no sense" * tag 'pinctrl-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: at91-pio4: fix pull-up/down logic
2016-05-12IB/cma: pass the port number to ib_create_qpChristoph Hellwig
The new RW API will need this. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12Merge branches 'mlx5-1' and 'srp-1' into k.o/for-4.7Doug Ledford
2016-05-12net/mlx5: Update mlx5_ifc hardware featuresSaeed Mahameed
Adding the needed mlx5_ifc hardware bits and structs for the following features: * Add vport to steering commands for SRIOV ACL support * Add mlcr, pcmr and mcia registers for dump module EEPROM * Add support for FCS, beacon led and disable_link bits to hca caps * Add CQE period mode bit in CQ context for CQE based CQ moderation support * Add umr SQ bit for fragmented memory registration * Add needed bits and caps for Striding RQ support In-order to avoid possible future conflicts between rdma and net-next we added all expected updates to this file for this release. If more changes will be submitted, we plan to do it only through one of the subsystems, probably net-next. All updated bits in this patch will be later used in the up-coming submissions to net-next and rdma trees. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12net/mlx5: Fix mlx5 ifc cmd_hca_cap bad offsetsTariq Toukan
All reserved fields after early_vf_enable are off by 1, since early_vf_enable was not explicitly declared as array of size 1. Reserved field before cqe_zip had a wrong size, it should be 0x80 + 0x3f. Fixes: b0844444590e ("net/mlx5_core: Introduce access function to read internal timer ") Fixes: b4ff3a36d3e4 ("net/mlx5: Use offset based reserved field names in the IFC header file") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Move common code into the callerBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Sagi Grimberg <sai@grimberg.m> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Move code out of a loopBart Van Assche
Since all srp_map_finish_fr() callers pass a non-zero value as the fourth argument (sg_nents), the sg_nents == 0 check in that function can be removed. Add a count == 0 check in the caller of that function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Avoid that mapping failure triggers an infinite loopBart Van Assche
The srp_queuecommand() function translates ENOMEM into QUEUE_FULL which causes the SCSI mid-layer to retry the command. All other error codes are translated into DID_ERROR which causes the SCSI command to fail. Return E2BIG if mapping will always fail to prevent that the SCSI mid-layer keeps resubmitting a command forever. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Introduce target->mr_pool_sizeBart Van Assche
This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Fix srp_map_data() error pathsBart Van Assche
Ensure that req->nmdesc is set correctly in srp_map_sg() if mapping fails. Avoid that mapping failure causes a memory descriptor leak. Report srp_map_sg() failure to the caller. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Document srp_map_data() return valueBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Fix a commentBart Van Assche
The free request list was removed through patch "IB/srp: Use block layer tags". Hence update a comment that refers to that free request list. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12IB/srp: Fix a spelling error in a source code commentBart Van Assche
Change one occurrence of "boundries" into "boundaries". Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-12ARM: OMAP5 / DRA7: Introduce workaround for 801819Nishanth Menon
Add workaround for Cortex-A15 ARM erratum 801819 which says in summary that "A livelock can occur in the L2 cache arbitration that might prevent a snoop from completing. Under certain conditions this can cause the system to deadlock. " Recommended workaround is as follows: Do both of the following: 1) Do not use the write-back no-allocate memory type. 2) Do not issue write-back cacheable stores at any time when the cache is disabled (SCTLR.C=0) and the MMU is enabled (SCTLR.M=1). Because it is implementation defined whether cacheable stores update the cache when the cache is disabled it is not expected that any portable code will execute cacheable stores when the cache is disabled. For implementations of Cortex-A15 configured without the “L2 arbitration register slice” option (typically one or two core systems), you must also do the following: 3) Disable write-streaming in each CPU by setting ACTLR[28:25] = 0b1111 So, we provide an option to disable write streaming on OMAP5 and DRA7. It is a rare condition to occur and may be enabled selectively based on platform acceptance of risk. Applies to: A15 revisions r2p0, r2p1, r2p2, r2p3 or r2p4 and REVIDR[3] is set to 0. Based on ARM errata Document revision 18.0 (22 Nov 2013) Note: the configuration for the workaround needs to be done with each CPU bringup, since CPU0 bringup is done by bootloader, it is recommended to have the workaround in the bootloader, kernel also does ensure that CPU0 has the workaround and makes the workaround active when CPU1 gets active. With CONFIG_SMP disabled, it is expected to be done by the bootloader. This does show significant degradation in synthetic tests such as mbw (https://packages.qa.debian.org/m/mbw.html) mbw -n 100 100|grep AVG (on a test platform) Without enabling the erratum: AVG Method: MEMCPY Elapsed: 0.13406 MiB: 100.00000 Copy: 745.913 MiB/s AVG Method: DUMB Elapsed: 0.06746 MiB: 100.00000 Copy: 1482.357 MiB/s AVG Method: MCBLOCK Elapsed: 0.03058 MiB: 100.00000 Copy: 3270.569 MiB/s After enabling the erratum: AVG Method: MEMCPY Elapsed: 0.13757 MiB: 100.00000 Copy: 726.913 MiB/s AVG Method: DUMB Elapsed: 0.12024 MiB: 100.00000 Copy: 831.668 MiB/s AVG Method: MCBLOCK Elapsed: 0.09243 MiB: 100.00000 Copy: 1081.942 MiB/s Most benchmarks are designed for specific performance analysis, so overall usecase must be considered before making a decision to enable/disable the erratum workaround. Pending internal investigation, the erratum is kept disabled by default. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tony Lindgren <tony@atomide.com> Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12gtp: put back reference to netns when not required anymorePablo Neira
This patch fixes a netns leak. Fixes: 93edb8c7f94f ("gtp: reload GTPv1 header after pskb_may_pull()") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12ALSA: au88x0: Fix zero clear of stream->resourcesTakashi Iwai
There are a few calls of memset() to stream->resources, but they all are called in a wrong size, sizeof(unsigned char) * VORTEX_RESOURCE_LAST, while this field is a u32 array. This may leave the memories not zero-cleared. Fix it by replacing them with a simpler sizeof(stream->resources) instead. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-12ata: dwc: add DMADEVICES dependencyArnd Bergmann
The dwc_460ex SATA driver has become available on non-powerpc architectures and may cause randconfig build errors when CONFIG_DMADEVICES is not set and SATA_DWC_OLD_DMA is enabled: warning: (SATA_DWC_OLD_DMA) selects DW_DMAC_CORE which has unmet direct dependencies (DMADEVICES) ERROR: "dw_dma_probe" [drivers/ata/sata_dwc_460ex.ko] undefined! ERROR: "dw_dma_remove" [drivers/ata/sata_dwc_460ex.ko] undefined! This adds an explcit Kconfig dependency to CONFIG_SATA_DWC so we cannot run into broken configurations. While it would also be possible to build the driver with both CONFIG_DMADEVICES and SATA_DWC_OLD_DMA disabled, that case is not useful because there is no fallback to PIO mode when the DMA engine is not usable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 50b433753df6 ("ata: sata_dwc_460ex: use "dmas" DT property to find dma channel") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12workqueue: fix rebind bound workers warningWanpeng Li
------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0 Modules linked in: CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31 Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046 Call Trace: dump_stack+0x89/0xd4 __warn+0xfd/0x120 warn_slowpath_null+0x1d/0x20 rebind_workers+0x1c0/0x1d0 workqueue_cpu_up_callback+0xf5/0x1d0 notifier_call_chain+0x64/0x90 ? trace_hardirqs_on_caller+0xf2/0x220 ? notify_prepare+0x80/0x80 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x35/0x50 notify_down_prepare+0x5e/0x80 ? notify_prepare+0x80/0x80 cpuhp_invoke_callback+0x73/0x330 ? __schedule+0x33e/0x8a0 cpuhp_down_callbacks+0x51/0xc0 cpuhp_thread_fun+0xc1/0xf0 smpboot_thread_fn+0x159/0x2a0 ? smpboot_create_threads+0x80/0x80 kthread+0xef/0x110 ? wait_for_completion+0xf0/0x120 ? schedule_tail+0x35/0xf0 ret_from_fork+0x22/0x50 ? __init_kthread_worker+0x70/0x70 ---[ end trace eb12ae47d2382d8f ]--- notify_down_prepare: attempt to take down CPU 0 failed This bug can be reproduced by below config w/ nohz_full= all cpus: CONFIG_BOOTPARAM_HOTPLUG_CPU0=y CONFIG_DEBUG_HOTPLUG_CPU0=y CONFIG_NO_HZ_FULL=y As Thomas pointed out: | If a down prepare callback fails, then DOWN_FAILED is invoked for all | callbacks which have successfully executed DOWN_PREPARE. | | But, workqueue has actually two notifiers. One which handles | UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE. | | Now look at the priorities of those callbacks: | | CPU_PRI_WORKQUEUE_UP = 5 | CPU_PRI_WORKQUEUE_DOWN = -5 | | So the call order on DOWN_PREPARE is: | | CB 1 | CB ... | CB workqueue_up() -> Ignores DOWN_PREPARE | CB ... | CB X ---> Fails | | So we call up to CB X with DOWN_FAILED | | CB 1 | CB ... | CB workqueue_up() -> Handles DOWN_FAILED | CB ... | CB X-1 | | So the problem is that the workqueue stuff handles DOWN_FAILED in the up | callback, while it should do it in the down callback. Which is not a good idea | either because it wants to be called early on rollback... | | Brilliant stuff, isn't it? The hotplug rework will solve this problem because | the callbacks become symetric, but for the existing mess, we need some | workaround in the workqueue code. The boot CPU handles housekeeping duty(unbound timers, workqueues, timekeeping, ...) on behalf of full dynticks CPUs. It must remain online when nohz full is enabled. There is a priority set to every notifier_blocks: workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down So tick_nohz_cpu_down callback failed when down prepare cpu 0, and notifier_blocks behind tick_nohz_cpu_down will not be called any more, which leads to workers are actually not unbound. Then hotplug state machine will fallback to undo and online cpu 0 again. Workers will be rebound unconditionally even if they are not unbound and trigger the warning in this progress. This patch fix it by catching !DISASSOCIATED to avoid rebind bound workers. Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: stable@vger.kernel.org Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
2016-05-12Merge tag 'mac80211-next-for-davem-2016-05-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more work for 4.7, notably: * completion and fixups of nla_put_64_64bit() work * remove a/b/g/n from wext nickname to avoid confusion with 11ac (which wouldn't even fit fully there due to string length restrictions) along with some other minor changes/cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12Merge tag 'at91-fixes2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "Second AT91 fix PR for 4.6" from Nicolas Ferre: - fix a regression on the clock subsystem while switching to syscon/regmap due to a stricter check of the register map. * tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC
2016-05-12netfilter: nfnetlink_queue: fix timestamp attributeFlorian Westphal
Since 4.4 we erronously use timestamp of the netlink skb (which is zero). Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1066 Fixes: b28b1e826f818c30ea7 ("netfilter: nfnetlink_queue: use y2038 safe timestamp") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-05-12cgroup: fix compile warningFelipe Balbi
commit 4f41fc59620f ("cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces") added the following compile warning: kernel/cgroup.c: In function ‘cgroup_show_path’: kernel/cgroup.c:1634:15: warning: unused variable ‘ret’ [-Wunused-variable] int len = 0, ret = 0; ^ fix it. Fixes: 4f41fc59620f ("cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12kernfs: kernfs_sop_show_path: don't return 0 after seq_dentry callSerge E. Hallyn
Our caller expects 0 on success, not >0. This fixes a bug in the patch cgroup, kernfs: make mountinfo show properly scoped path for cgroup namespaces where /sys does not show up in mountinfo, breaking criu. Thanks for catching this, Andrei. Reported-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12powerpc/4xx: Device tree update for the 460ex DWC SATAAndy Shevchenko
Device tree update for the Applied micro processor 460ex on-chip SATA to use "dmas" property. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: make debug messages neatAndy Shevchenko
There is a duplication in the debug messages when accessing SCR registers. Remove duplication to make the messages neat. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: supply physical address of FIFO to DMAAndy Shevchenko
DMA operates with physical addresses which is not exactly the same as ioremap() returns. Introduce variable to keep physical address of the SATA FIFO register and supply it when prepare DMA channel. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: use devm_ioremapAndy Shevchenko
This simplifies error handling and cleanup by using devm to manage IO mappings. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()Mans Rullgard
This consolidates the reads from each of the if/else branches to one place making the code a lot nicer to look at. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: use readl/writel_relaxed()Mans Rullgard
Rename the register access macros and use standard _relaxed() ops instead of __raw variants with explicit byte swapping. The original driver used the ppc-specific in/out_le32(). When it was adapted to other systems, these were added to the driver under ifdefs. However, those names are not defined as macros on ppc, so it ended up replacing them there as well with altered semantics. This patch restores the original semantics on ppc and makes the accesses no less strict on other systems. Also fixes too many sparse warnings to count. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-30 05:09:29 +0000