summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-09drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hangJim Qu
effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu <Jim.Qu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20Tao Zhou
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun.Li <yukun1.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-09ASoC: Intel: Boards: move the codec PLL configuration to _initMac Chiang
move the codec PLL to rt5682_codec_init, because codec only need to config the clock source/PLL once. As the result, remove the platform_clock_controls since no need to control clock anymore. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbolsArnaldo Carvalho de Melo
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I noticed that 'arch_cpu_idle' dominated, add it to the list of idle symbols, so that we can see what is that being done when not idle. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09hv_balloon: avoid touching uninitialized struct page during tail onliningVitaly Kuznetsov
Hyper-V memory hotplug protocol has 2M granularity and in Linux x86 we use 128M. To deal with it we implement partial section onlining by registering custom page onlining callback (hv_online_page()). Later, when more memory arrives we try to online the 'tail' (see hv_bring_pgs_online()). It was found that in some cases this 'tail' onlining causes issues: BUG: Bad page state in process kworker/0:2 pfn:109e3a page:ffffe08344278e80 count:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0xfffff80000000() raw: 000fffff80000000 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount ... Workqueue: events hot_add_req [hv_balloon] Call Trace: dump_stack+0x5c/0x80 bad_page.cold.112+0x7f/0xb2 free_pcppages_bulk+0x4b8/0x690 free_unref_page+0x54/0x70 hv_page_online_one+0x5c/0x80 [hv_balloon] hot_add_req.cold.24+0x182/0x835 [hv_balloon] ... Turns out that we now have deferred struct page initialization for memory hotplug so e.g. memory_block_action() in drivers/base/memory.c does pages_correctly_probed() check and in that check it avoids inspecting struct pages and checks sections instead. But in Hyper-V balloon driver we do PageReserved(pfn_to_page()) check and this is now wrong. Switch to checking online_section_nr() instead. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09Drivers: hv: vmbus: Check for ring when getting debug infoDexuan Cui
fc96df16a1ce is good and can already fix the "return stack garbage" issue, but let's also improve hv_ringbuffer_get_debuginfo(), which would silently return stack garbage, if people forget to check channel->state or ring_info->ring_buffer, when using the function in the future. Having an error check in the function would eliminate the potential risk. Add a Fixes tag to indicate the patch depdendency. Fixes: fc96df16a1ce ("Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09clk: vc5: Abort clock configuration without upstream clockMarek Vasut
In case the upstream clock are not set, which can happen in case the VC5 has no valid upstream clock, the $src variable is used uninited by regmap_update_bits(). Check for this condition and return -EINVAL in such case. Note that in case the VC5 has no valid upstream clock, the VC5 can not operate correctly. That is a hardware property of the VC5. The internal oscilator present in some VC5 models is also considered upstream clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-renesas-soc@vger.kernel.org [sboyd@kernel.org: Added comment about probe preventing this from happening in the first place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09nvme: don't initlialize ctrl->cntlid twiceAndrey Smirnov
ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQNJames Dingwall
If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: James Dingwall <james@dingwall.me.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: pad fake subsys NQN vid and ssvid with zerosKeith Busch
We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-multipath: zero out ANA log bufferHannes Reinecke
When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-fabrics: unset write/poll queues for discovery controllersSagi Grimberg
Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: don't ask if controller is fabricsSagi Grimberg
For sure we are a fabric driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: remove dead codeSagi Grimberg
We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix out of bounds access in nvme_cqe_pendingHongbo Yao
There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> [hch: slight coding style update] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: rerun irq setup on IO queue init errorsKeith Busch
If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: use the same attributes when freeing host_mem_desc_bufs.Liviu Dudau
When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix the wrong setting of nr_mapsJianchao Wang
We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09clk: sysfs: fix invalid JSON in clk_dumpLubomir Rintel
Add a missing comma so that the output is valid JSON format again. Fixes: 9fba738a53dd ("clk: add duty cycle support") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: imx: Remove Kconfig duplicate includeAbel Vesa
Commit d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant") introduced this duplicate and incorrectly ordered kconfig include. Fixes: d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: zynqmp: Fix memory allocation in zynqmp_clk_setupGustavo A. R. Silva
Fix memory allocation and use struct_size() in kzalloc(). This also fixes the allocation size to be correct, and smaller, because before we were allocating a bunch of sizeof(struct clk_hw_onecell_data) structures for each struct clk_hw we needed. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Expand commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: tegra: dfll: Fix a potential Oop in remove()Dan Carpenter
If tegra_dfll_unregister() fails then "soc" is an error pointer. We should just return instead of dereferencing it. Fixes: 1752c9ee23fb ("clk: tegra: dfll: Fix drvdata overwriting issue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: imx: fix potential NULL dereference in imx8qxp_lpcg_clk_probe()Wei Yongjun
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 1e3121bfe51a ("clk: imx: add imx8qxp lpcg driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09Merge tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky bug fixes from Guo Ren: "Here are some fixup patches for 5.0-rc1: - fix compile error with pte_alloc - fix handle_irq_perbit break irq flow - fix CACHEV1 store instruction fast retire - fix module relocation error with 807 & 860 - add csky kernel features to documentation" * tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux: irqchip/csky: fixup handle_irq_perbit break irq csky: fixup compile error with pte_alloc csky: fixup CACHEV1 store instruction fast retire csky: fixup relocation error with 807 & 860 Documentation/features: Add csky kernel features
2019-01-09block: doc: add slice_idle_us to bfq documentationJohn Pittman
Of the tunables available for the bfq I/O scheduler, the only one missing from the documentation in 'Documentation/block/bfq-iosched.txt' is slice_idle_us. Add this tunable to the documentation and a short explanation of its purpose. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09Btrfs: fix deadlock when using free space tree due to block group creationFilipe Manana
When modifying the free space tree we can end up COWing one of its extent buffers which in turn might result in allocating a new chunk, which in turn can result in flushing (finish creation) of pending block groups. If that happens we can deadlock because creating a pending block group needs to update the free space tree, and if any of the updates tries to modify the same extent buffer that we are COWing, we end up in a deadlock since we try to write lock twice the same extent buffer. So fix this by skipping pending block group creation if we are COWing an extent buffer from the free space tree. This is a case missed by commit 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202173 Fixes: 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches") CC: stable@vger.kernel.org # 4.18+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-09Btrfs: fix race between reflink/dedupe and relocationFilipe Manana
The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between relocation and reflinking (for both cloning and deduplication) the file extents between the source and destination inodes. This happens because we no longer lock the source range anymore, and we do not lock it anymore because we wait for direct IO writes and writeback to complete early on the code path right after locking the inodes, which guarantees no other file operations interfere with the reflinking. However there is one exception which is relocation, since it replaces the byte number of file extents items in the fs tree after locking the range the file extent items represent. This is a problem because after finding each file extent to clone in the fs tree, the reflink process copies the file extent item into a local buffer, releases the search path, inserts new file extent items in the destination range and then increments the reference count for the extent mentioned in the file extent item that it previously copied to the buffer. If right after copying the file extent item into the buffer and releasing the path the relocation process updates the file extent item to point to the new extent, the reflink process ends up creating a delayed reference to increment the reference count of the old extent, for which the relocation process already created a delayed reference to drop it. This results in failure to run delayed references because we will attempt to increment the count of a reference that was already dropped. This is illustrated by the following diagram: CPU 1 CPU 2 relocation is running btrfs_clone_files() btrfs_clone() --> finds extent item in source range point to extent at bytenr X --> copies it into a local buffer --> releases path replace_file_extents() --> successfully locks the range represented by the file extent item --> replaces disk_bytenr field in the file extent item with some other value Y --> creates delayed reference to increment reference count for extent at bytenr Y --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X <delayed references are run, due to a transaction commit for example, and the transaction is aborted with -EIO because we attempt to increment reference count for the extent at bytenr X after we freed it> When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by locking the source range before searching for the file extent items in the fs tree, since the relocation process will try to lock the range a file extent item represents before updating it with the new extent location. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-09Btrfs: fix race between cloning range ending at eof and writebackFilipe Manana
The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between writeback and cloning a range that covers the eof extent of the source file into a destination offset that is greater then the same file's size. This happens because we now wait for writeback to complete before doing the truncation of the eof block, while previously we did the truncation and then waited for writeback to complete. This leads to a race between writeback of the truncated block and cloning the file extents in the source range, because we copy each file extent item we find in the fs root into a buffer, then release the path and then increment the reference count for the extent referred in that file extent item we copied, which can no longer exist if writeback of the truncated eof block completes after we copied the file extent item into the buffer and before we incremented the reference count. This is illustrated by the following diagram: CPU 1 CPU 2 btrfs_clone_files() btrfs_cont_expand() btrfs_truncate_block() --> zeroes part of the page containg eof, marking it for delalloc btrfs_clone() --> finds extent item covering eof, points to extent at bytenr X --> copies it into a local buffer --> releases path writeback starts btrfs_finish_ordered_io() insert_reserved_file_extent() __btrfs_drop_extents() --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X <delayed references are run, due to a transaction commit for example, and the transaction is aborted with -EIO because we attempt to increment reference count for the extent at bytenr X after we freed it> When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by waiting for writeback to complete after truncating the eof block. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-09tools include uapi: Sync linux/if_link.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: a428afe82f98 ("net: bridge: add support for user-controlled bool options") a025fb5f49ad ("geneve: Allow configuration of DF behaviour") b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Silencing this tools/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Stefano Brivio <sbrivio@redhat.com> Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnelSu Yanjun
Recently we run a network test over ipcomp virtual tunnel.We find that if a ipv4 packet needs fragment, then the peer can't receive it. We deep into the code and find that when packet need fragment the smaller fragment will be encapsulated by ipip not ipcomp. So when the ipip packet goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code always set skb'dev to the last fragment's dev. After ipv4 defrag processing, when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV error. This patch adds compatible support for the ipip process in ipcomp virtual tunnel. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09xfrm: policy: fix infinite loop when merging src-nodesFlorian Westphal
With very small change to test script we can trigger softlockup due to bogus assignment of 'p' (policy to be examined) on restart. Previously the two to-be-merged nodes had same address/prefixlength pair, so no erase/reinsert was necessary, we only had to append the list from node a to b. If prefix lengths are different, the node has to be deleted and re-inserted into the tree, with the updated prefix length. This was broken; due to bogus update to 'p' this loops forever. Add a 'restart' label and use that instead. While at it, don't perform the unneeded reinserts of the policies that are already sorted into the 'new' node. A previous patch in this series made xfrm_policy_inexact_list_reinsert() use the relative position indicator to sort policies according to age in case priorities are identical. Fixes: 6ac098b2a9d30 ("xfrm: policy: add 2nd-level saddr trees for inexact policies") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09selftests: xfrm: alter htresh to trigger move of policies to hash tableFlorian Westphal
... and back to inexact tree. Repeat ping test after each htresh change: lookup results must not change. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09xfrm: policy: fix reinsertion on node mergeFlorian Westphal
"newpos" has wrong scope. It must be NULL on each iteration of the loop. Otherwise, when policy is to be inserted at the start, we would instead insert at point found by the previous loop-iteration instead. Also, we need to unlink the policy before we reinsert it to the new node, else we can get next-points-to-self loops. Because policies are only ordered by priority it is irrelevant which policy is "more recent" except when two policies have same priority. (the more recent one is placed after the older one). In these cases, we can use the ->pos id number to know which one is the 'older': the higher the id, the more recent the policy. So we only need to unlink all policies from the node that is about to be removed, and insert them to the replacement node. Fixes: 9cf545ebd591da ("xfrm: policy: store inexact policies in a tree ordered by destination address") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09xfrm: policy: delete inexact policies from inexact list on hash rebuildFlorian Westphal
An xfrm hash rebuild has to reset the inexact policy list before the policies get re-inserted: A change of hash thresholds will result in policies to get moved from inexact tree to the policy hash table. If the thresholds are increased again later, they get moved from hash table to inexact tree. We must unlink all policies from the inexact tree before re-insertion. Otherwise 'migrate' may find policies that are in main hash table a second time, when it searches the inexact lists. Furthermore, re-insertion without deletion can cause elements ->next to point back to itself, causing soft lockups or double-frees. Reported-by: syzbot+9d971dd21eb26567036b@syzkaller.appspotmail.com Fixes: 9cf545ebd591da ("xfrm: policy: store inexact policies in a tree ordered by destination address") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09xfrm: policy: increment xfrm_hash_generation on hash rebuildFlorian Westphal
Hash rebuild will re-set all the inexact entries, then re-insert them. Lookups that can occur in parallel will therefore not find any policies. This was safe when lookups were still guarded by rwlock. After rcu-ification, lookups check the hash_generation seqcount to detect when a hash resize takes place. Hash rebuild missed the needed increment. Hash resizes and hash rebuilds cannot occur in parallel (both acquire hash_resize_mutex), so just increment xfrm_hash_generation, like resize. Fixes: a7c44247f704e3 ("xfrm: policy: make xfrm_policy_lookup_bytype lockless") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09xfrm: policy: use hlist rcu variants on inexact insert, part 2Florian Westphal
This function was modeled on the 'exact' insert one, which did not use the rcu variant either. When I fixed the 'exact' insert I forgot to propagate this to my development tree, so the inexact variant retained the bug. Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09selftests: xfrm: add block rules with adjacent/overlapping subnetsFlorian Westphal
The existing script lacks a policy pattern that triggers 'tree node merges' in the kernel. Consider adding policy affecting following subnet: pol1: dst 10.0.0.0/22 pol2: dst 10.0.0.0/23 # adds to existing 10.0.0.0/22 node -> no problems here. But now, lets consider reverse order: pol1: dst 10.0.0.0/24 pol2: dst 10.0.0.0/23 # CANNOT add to existing node When second policy gets added, the kernel must check that the new node ("10.0.0.0/23") doesn't overlap with any existing subnet. Example: dst 10.0.0.0/24 dst 10.0.0.1/24 dst 10.0.0.0/23 When the third policy gets added, the kernel must replace the nodes for the 10.0.0.0/24 and 10.0.0.1/24 policies with a single one and must merge all the subtrees/lists stored in those nodes into the new node. The existing test cases only have overlaps with a single node, so no merging takes place (we can always remove the 'old' node and replace it with the new subnet prefix). Add a few 'block policies' in a pattern that triggers this, with a priority that will make kernel prefer the 'esp' rules. Make sure the 'tunnel ping' tests still pass after they have been added. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09ASoC: soc-core: defer card probe until all component is added to listAjit Pandey
DAI component probe is not called if it is not present in component list during sound card registration. Check if component is available in component list for platform and cpu dai before soundcard registration. Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.17+ <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09doc: trace: fix reference to cpuidle documentation fileOtto Sabart
Old cpuidle/sysfs.txt file was replaced in aa5eee355b46. So, refer to an updated file. Fixes: aa5eee355b46 (Documentation: admin-guide: PM: Add cpuidle document) Signed-off-by: Otto Sabart <ottosabart@seberm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-09include/linux/compiler*.h: fix OPTIMIZER_HIDE_VARMichael S. Tsirkin
Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable. Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef. Also fix up comments to match reality since we are no longer overriding any macros. Build-tested with gcc and clang. Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Eli Friedman <efriedma@codeaurora.org> Cc: Joe Perches <joe@perches.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-01-09drm/bridge: tc358767: use DP connector if no panel setTomi Valkeinen
tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix output H/V syncsTomi Valkeinen
The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: reject modes which require too much BWTomi Valkeinen
The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix initial DP0/1_SRCCTRL valueTomi Valkeinen
Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: fix single lane configurationTomi Valkeinen
PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANETomi Valkeinen
DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com
2019-01-09drm/bridge: tc358767: add bus flagsTomi Valkeinen
tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com
2019-01-09x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINEWANG Chao
Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable <stable@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn
2019-01-09x86/cache: Rename config option to CONFIG_X86_RESCTRLBorislav Petkov
CONFIG_RESCTRL is too generic. The final goal is to have a generic option called like this which is selected by the arch-specific ones CONFIG_X86_RESCTRL and CONFIG_ARM64_RESCTRL. The generic one will cover the resctrl filesystem and other generic and shared bits of functionality. Signed-off-by: Borislav Petkov <bp@suse.de> Suggested-by: Ingo Molnar <mingo@kernel.org> Requested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Babu Moger <babu.moger@amd.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Morse <james.morse@arm.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20190108171401.GC12235@zn.tnic
generated by cgit (git 2.34.1) at 2025-09-15 20:55:09 +0000