summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-30thunderbolt: Fix off by one in tb_port_find_retimer()Dan Carpenter
This array uses 1-based indexing so it corrupts memory one element beyond of the array. Fix it by making the array one element larger. Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-30thunderbolt: Fix a leak in tb_retimer_add()Dan Carpenter
After the device_register() succeeds, then the correct way to clean up is to call device_unregister(). The unregister calls both device_del() and device_put(). Since this code was only device_del() it results in a memory leak. Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-30ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfacesStefan Riedmueller
Setting the vmmc supplies is crucial since otherwise the supplying regulators get disabled and the SD interfaces are no longer powered which leads to system failures if the system is booted from that SD interface. Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module") Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-30xfrm/compat: Cleanup WARN()s that can be user-triggeredDmitry Safonov
Replace WARN_ONCE() that can be triggered from userspace with pr_warn_once(). Those still give user a hint what's the issue. I've left WARN()s that are not possible to trigger with current code-base and that would mean that the code has issues: - relying on current compat_msg_min[type] <= xfrm_msg_min[type] - expected 4-byte padding size difference between compat_msg_min[type] and xfrm_msg_min[type] - compat_policy[type].len <= xfrma_policy[type].len (for every type) Reported-by: syzbot+834ffd1afc7212eb8147@syzkaller.appspotmail.com Fixes: 5f3eea6b7e8f ("xfrm/compat: Attach xfrm dumps to 64=>32 bit translator") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-03-29scsi: iscsi: Fix race condition between login and sync threadGulam Mohamed
A kernel panic was observed due to a timing issue between the sync thread and the initiator processing a login response from the target. The session reopen can be invoked both from the session sync thread when iscsid restarts and from iscsid through the error handler. Before the initiator receives the response to a login, another reopen request can be sent from the error handler/sync session. When the initial login response is subsequently processed, the connection has been closed and the socket has been released. To fix this a new connection state, ISCSI_CONN_BOUND, is added: - Set the connection state value to ISCSI_CONN_DOWN upon iscsi_if_ep_disconnect() and iscsi_if_stop_conn() - Set the connection state to the newly created value ISCSI_CONN_BOUND after bind connection (transport->bind_conn()) - In iscsi_set_param(), return -ENOTCONN if the connection state is not either ISCSI_CONN_BOUND or ISCSI_CONN_UP Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> index 91074fd97f64..f4bf62b007a0 100644
2021-03-29ethernet/netronome/nfp: Fix a use after free in nfp_bpf_ctrl_msg_rxLv Yunlong
In nfp_bpf_ctrl_msg_rx, if nfp_ccm_get_type(skb) == NFP_CCM_TYPE_BPF_BPF_EVENT is true, the skb will be freed. But the skb is still used by nfp_ccm_rx(&bpf->ccm, skb). My patch adds a return when the skb was freed. Fixes: bcf0cafab44fd ("nfp: split out common control message handling code") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-29 This series contains updates to ice driver only. Ani does not fail on link/PHY errors during probe as this is not a fatal error to prevent the user from remedying the problem. He also corrects checking Wake on LAN support to be port number, not PF ID. Fabio increases the AdminQ timeout as some commands can take longer than the current value. Chinh fixes iSCSI to use be able to use port 860 by using information from DCBx and other QoS configuration info. Krzysztof fixes a possible race between ice_open() and ice_stop(). Bruce corrects the ordering of arguments in a memory allocation call. Dave removes DCBNL device reset bit which is blocking changes coming from DCBNL interface. Jacek adds error handling for filter allocation failure. Robert ensures memory is freed if VSI filter list issues are encountered. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29dt-bindings: net: bcm4908-enet: fix Ethernet generic propertiesRafał Miłecki
This binding file uses $ref: ethernet-controller.yaml# so it's required to use "unevaluatedProperties" (instead of "additionalProperties") to make Ethernet properties validate. Fixes: f08b5cf1eb1f ("dt-bindings: net: bcm4908-enet: include ethernet-controller.yaml") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29dt-bindings: net: ethernet-controller: fix typo in NVMEMRafał Miłecki
The correct property name is "nvmem-cell-names". This is what: 1. Was originally documented in the ethernet.txt 2. Is used in DTS files 3. Matches standard syntax for phandles 4. Linux net subsystem checks for Fixes: 9d3de3c58347 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29net:tipc: Fix a double free in tipc_sk_mcast_rcvLv Yunlong
In the if(skb_peek(arrvq) == skb) branch, it calls __skb_dequeue(arrvq) to get the skb by skb = skb_peek(arrvq). Then __skb_dequeue() unlinks the skb from arrvq and returns the skb which equals to skb_peek(arrvq). After __skb_dequeue(arrvq) finished, the skb is freed by kfree_skb(__skb_dequeue(arrvq)) in the first time. Unfortunately, the same skb is freed in the second time by kfree_skb(skb) after the branch completed. My patch removes kfree_skb() in the if(skb_peek(arrvq) == skb) branch, because this skb will be freed by kfree_skb(skb) finally. Fixes: cb1b728096f54 ("tipc: eliminate race condition at multicast reception") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29cxgb4: avoid collecting SGE_QBASE regs during trafficRahul Lakkireddy
Accessing SGE_QBASE_MAP[0-3] and SGE_QBASE_INDEX registers can lead to SGE missing doorbells under heavy traffic. So, only collect them when adapter is idle. Also update the regdump range to skip collecting these registers. Fixes: 80a95a80d358 ("cxgb4: collect SGE PF/VF queue map") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30Merge tag 'intel-pinctrl-v5.12-3' of ↵Linus Walleij
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.12-3 * Check if device is present, which is not the case in Xen The following is an automated git shortlog grouped by driver: intel: - check REVID register value for device presence
2021-03-29clk: qcom: camcc: Update the clock ops for the SC7180Taniya Das
Some of the RCGs could be always ON from the XO source and could be used as the clock on signal for the GDSC to be operational. In the cases where the GDSCs are parked at different source with the source clock disabled, it could lead to the GDSC to be stuck at ON/OFF during gdsc disable/enable. Thus park the RCGs at XO during clock disable and update the rcg_ops to use the shared_ops. Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1616809265-11912-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-29net: dsa: Fix type was not set for devlink portMaxim Kochetkov
If PHY is not available on DSA port (described at devicetree but absent or failed to detect) then kernel prints warning after 3700 secs: [ 3707.948771] ------------[ cut here ]------------ [ 3707.948784] Type was not set for devlink port. [ 3707.948894] WARNING: CPU: 1 PID: 17 at net/core/devlink.c:8097 0xc083f9d8 We should unregister the devlink port as a user port and re-register it as an unused port before executing "continue" in case of dsa_port_setup error. Fixes: 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29vfio/nvlink: Add missing SPAPR_TCE_IOMMU dependsJason Gunthorpe
Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there are compile errors: drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration] ret = mm_iommu_put(data->mm, data->mem); As PPC only defines these functions when the config is set. Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only IOMMU that could have satisfied IOMMU_API on POWERNV. Fixes: 179209fa1270 ("vfio: IOMMU_API should be selected") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-29gianfar: Handle error code at MAC address changeClaudiu Manoil
Handle return error code of eth_mac_addr(); Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29ethernet: myri10ge: Fix a use after free in myri10ge_sw_tsoLv Yunlong
In myri10ge_sw_tso, the skb_list_walk_safe macro will set (curr) = (segs) and (next) = (curr)->next. If status!=0 is true, the memory pointed by curr and segs will be free by dev_kfree_skb_any(curr). But later, the segs is used by segs = segs->next and causes a uaf. As (next) = (curr)->next, my patch replaces seg->next to next. Fixes: 536577f36ff7a ("net: myri10ge: use skb_list_walk_safe helper for gso segments") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29MAINTAINERS: Add entry for Qualcomm IPC Router (QRTR) driverManivannan Sadhasivam
Add MAINTAINERS entry for Qualcomm IPC Router (QRTR) driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29Merge tag 'linux-can-fixes-for-5.12-20210329' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-03-29 this is a pull request of 3 patches for net/master. The two patch are by Oliver Hartkopp. He fixes length check in the proto_ops::getname callback for the CAN RAW, BCM and ISOTP protocols, which were broken by the introduction of the J1939 protocol. The last patch is by me and fixes the a BUILD_BUG_ON() check which triggers on ARCH=arm with CONFIG_AEABI unset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29Merge branch 'mlxsw-ecn-marking'David S. Miller
Ido Schimmel says: ==================== mlxsw: spectrum: Fix ECN marking in tunnel decapsulation Patch #1 fixes a discrepancy between the software and hardware data paths with regards to ECN marking after decapsulation. See the changelog for a detailed description. Patch #2 extends the ECN decap test to cover all possible combinations of inner and outer ECN markings. The test passes over both data paths. v2: * Only set ECT(1) if inner is ECT(0) * Introduce a new helper to determine inner ECN. Share it between NVE and IP-in-IP tunnels * Extend the selftest ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29selftests: forwarding: vxlan_bridge_1d: Add more ECN decap test casesIdo Schimmel
Test that all possible combinations of inner and outer ECN bits result in the correct inner ECN marking according to RFC 6040 4.2. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29mlxsw: spectrum: Fix ECN marking in tunnel decapsulationIdo Schimmel
Cited commit changed the behavior of the software data path with regards to the ECN marking of decapsulated packets. However, the commit did not change other callers of __INET_ECN_decapsulate(), namely mlxsw. The driver is using the function in order to ensure that the hardware and software data paths act the same with regards to the ECN marking of decapsulated packets. The discrepancy was uncovered by commit 5aa3c334a449 ("selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value") that aligned the selftest to the new behavior. Without this patch the selftest passes when used with veth pairs, but fails when used with mlxsw netdevs. Fix this by instructing the device to propagate the ECT(1) mark from the outer header to the inner header when the inner header is ECT(0), for both NVE and IP-in-IP tunnels. A helper is added in order not to duplicate the code between both tunnel types. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29clk: socfpga: fix iomem pointer cast on 64-bitKrzysztof Kozlowski
Pointers should be cast with uintptr_t instead of integer. This fixes warning when compile testing on ARM64: drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’: drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixes: b7cec13f082f ("clk: socfpga: Look for the GPIO_DB_CLK by its offset") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-29Merge tag 'xtensa-20210329' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull xtensa fixes from Max Filippov: - fix build with separate exception vectors when they are placed too far from the rest of the kernel - fix uaccess-related livelock in do_page_fault. * tag 'xtensa-20210329' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix uaccess-related livelock in do_page_fault xtensa: move coprocessor_flush to the .text section
2021-03-29xtensa: fix uaccess-related livelock in do_page_faultMax Filippov
If a uaccess (e.g. get_user()) triggers a fault and there's a fault signal pending, the handler will return to the uaccess without having performed a uaccess fault fixup, and so the CPU will immediately execute the uaccess instruction again, whereupon it will livelock bouncing between that instruction and the fault handler. https://lore.kernel.org/lkml/20210121123140.GD48431@C02TD0UTHF1T.local/ Cc: stable@vger.kernel.org Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2021-03-29drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()Nirmoy Das
Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-29drm/amd/pm: no need to force MCLK to highest when no display connectedEvan Quan
Correct the check for vblank short. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-29ice: Cleanup fltr list in case of allocation issuesRobert Malz
When ice_remove_vsi_lkup_fltr is called, by calling ice_add_to_vsi_fltr_list local copy of vsi filter list is created. If any issues during creation of vsi filter list occurs it up for the caller to free already allocated memory. This patch ensures proper memory deallocation in these cases. Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions") Signed-off-by: Robert Malz <robertx.malz@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Use port number instead of PF ID for WoLAnirudh Venkataramanan
As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Fix for dereference of NULL pointerJacek Bułatek
Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com> Co-developed-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: remove DCBNL_DEVRESET bit from PF stateDave Ertman
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29PM: runtime: Fix race getting/putting suppliers at probeAdrian Hunter
pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das <asutoshd@codeaurora.org> Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-29PM: runtime: Fix ordering in pm_runtime_get_suppliers()Adrian Hunter
rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-29ACPI: tables: x86: Reserve memory occupied by ACPI tablesRafael J. Wysocki
The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
2021-03-29ice: fix memory allocation callBruce Allan
Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: prevent ice_open and ice_stop during resetKrzysztof Goreczny
There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Recognize 860 as iSCSI port in CEE modeChinh T Cao
iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Increase control queue timeoutFabio Pricoco
250 msec timeout is insufficient for some AQ commands. Advice from FW team was to increase the timeout. Increase to 1 second. Fixes: 7ec59eeac804 ("ice: Add support for control queues") Signed-off-by: Fabio Pricoco <fabio.pricoco@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Continue probe on link/PHY errorsAnirudh Venkataramanan
An incorrect NVM update procedure can result in the driver failing probe. In this case, the recommended resolution method is to update the NVM using the right procedure. However, if the driver fails probe, the user will not be able to update the NVM. So do not fail probe on link/PHY errors. Fixes: 1a3571b5938c ("ice: restore PHY settings on media insertion") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ASoC: cygnus: fix for_each_child.cocci warningskernel test robot
Function "for_each_available_child_of_node" should have of_node_put() before return around line 1352. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Sumera Priyadarsini <sylphrenadin@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103281651320.2854@hadrien Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-29io_uring: handle setup-failed ctx in kill_timeoutsPavel Begunkov
general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:io_commit_cqring+0x37f/0xc10 fs/io_uring.c:1318 Call Trace: io_kill_timeouts+0x2b5/0x320 fs/io_uring.c:8606 io_ring_ctx_wait_and_kill+0x1da/0x400 fs/io_uring.c:8629 io_uring_create fs/io_uring.c:9572 [inline] io_uring_setup+0x10da/0x2ae0 fs/io_uring.c:9599 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae It can get into wait_and_kill() before setting up ctx->rings, and hence io_commit_cqring() fails. Mimic poll cancel and do it only when we completed events, there can't be any requests if it failed before initialising rings. Fixes: 80c4cbdb5ee60 ("io_uring: do post-completion chore on t-out cancel") Reported-by: syzbot+0e905eb8228070c457a0@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/660261a48f0e7abf260c8e43c87edab3c16736fa.1617014345.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-29ALSA: usb-audio: Apply sample rate quirk to Logitech ConnectIkjoon Jang
Logitech ConferenceCam Connect is a compound USB device with UVC and UAC. Not 100% reproducible but sometimes it keeps responding STALL to every control transfer once it receives get_freq request. This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-29drm/exynos/decon5433: Remove the unused include statementsTian Tao
This driver doesn't reference of_gpio.h, so drop it. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-03-29can: uapi: can.h: mark union inside struct can_frame packedMarc Kleine-Budde
In commit ea7800565a12 ("can: add optional DLC element to Classical CAN frame structure") the struct can_frame::can_dlc was put into an anonymous union with another u8 variable. For various reasons some members in struct can_frame and canfd_frame including the first 8 byes of data are expected to have the same memory layout. This is enforced by a BUILD_BUG_ON check in af_can.c. Since the above mentioned commit this check fails on ARM kernels compiled with the ARM OABI (which means CONFIG_AEABI not set). In this case -mabi=apcs-gnu is passed to the compiler, which leads to a structure size boundary of 32, instead of 8 compared to CONFIG_AEABI enabled. This means the the union in struct can_frame takes 4 bytes instead of the expected 1. Rong Chen illustrates the problem with pahole in the ARM OABI case: | struct can_frame { | canid_t can_id; /* 0 4 */ | union { | __u8 len; /* 4 1 */ | __u8 can_dlc; /* 4 1 */ | }; /* 4 4 */ | __u8 __pad; /* 8 1 */ | __u8 __res0; /* 9 1 */ | __u8 len8_dlc; /* 10 1 */ | | /* XXX 5 bytes hole, try to pack */ | | __u8 data[8] | __attribute__((__aligned__(8))); /* 16 8 */ | | /* size: 24, cachelines: 1, members: 6 */ | /* sum members: 19, holes: 1, sum holes: 5 */ | /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */ | /* last cacheline: 24 bytes */ | } __attribute__((__aligned__(8))); Marking the anonymous union as __attribute__((packed)) fixes the BUILD_BUG_ON problem on these compilers. Fixes: ea7800565a12 ("can: add optional DLC element to Classical CAN frame structure") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Rong Chen <rong.a.chen@intel.com> Link: https://lore.kernel.org/linux-can/2c82ec23-3551-61b5-1bd8-178c3407ee83@hartkopp.net/ Link: https://lore.kernel.org/r/20210325125850.1620-3-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: isotp: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Reported-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-2-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: bcm/raw: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") Reported-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29xfrm: Provide private skb extensions for segmented and hw offloaded ESP packetsSteffen Klassert
Commit 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.") added a XFRM_XMIT flag to avoid duplicate ESP trailer insertion on HW offload. This flag is set on the secpath that is shared amongst segments. This lead to a situation where some segments are not transformed correctly when segmentation happens at layer 3. Fix this by using private skb extensions for segmented and hw offloaded ESP packets. Fixes: 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-03-28Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolutionDmitry Osipenko
Drop unnecessary zero-checking of ABS_MT_TOUCH_MAJOR resolution since there is no difference between setting resolution to 0 vs not setting it at all. This change makes code cleaner a tad. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210328235507.19240-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-29arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0Oliver Stäbler
Fix address of the pad control register (IOMUXC_SW_PAD_CTL_PAD_SD1_DATA0) for SD1_DATA0_GPIO2_IO2. This seems to be a typo but it leads to an exception when pinctrl is applied due to wrong memory address access. Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Fixes: c1c9d41319c3 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm") Fixes: 748f908cc882 ("arm64: add basic DTS for i.MX8MQ") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-28drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmitLv Yunlong
In pvc_xmit, if __skb_pad(skb, pad, false) failed, it will free the skb in the first time and goto drop. But the same skb is freed by kfree_skb(skb) in the second time in drop. Maintaining the original function unchanged, my patch adds a new label out to avoid the double free if __skb_pad() failed. Fixes: f5083d0cee08a ("drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 20:21:58 +0000