Age | Commit message (Collapse) | Author |
|
Factor out slowpath into a separate helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new helper that calls dir_emit() and updates ctx->pos on success;
this lets us convert bch2_readdir() to drop_locks_do().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.
These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Consolidate mark_superblock() and trans_mark_superblock(), like we did
with the other trigger paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
with errors_silent, reconstruct_alloc no longer requires fsck and
fix_errors to work
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This optimization reduces the average number of comparisons required
from 2*n*log2(n) - 3*n + o(n) to n*log2(n) + 0.37*n + o(n). When n is
sufficiently large, it results in approximately 50% fewer comparisons.
Currently, eytzinger0_sort employs the textbook version of heapsort,
where during the heapify process, each level requires two comparisons
to determine the maximum among three elements. In contrast, the
bottom-up heapsort, during heapify, only compares two children at each
level until reaching a leaf node. Then, it backtracks from the leaf
node to find the correct position. Since heapify typically continues
until very close to the leaf node, the standard heapify requires about
2*log2(n) comparisons, while the bottom-up variant only needs log2(n)
comparisons.
The experimental data presented below is based on an array generated
by get_random_u32().
| N | comparisons(old) | comparisons(new) | time(old) | time(new) |
|-------|------------------|------------------|-----------|-----------|
| 10000 | 235381 | 136615 | 25545 us | 20366 us |
| 20000 | 510694 | 293425 | 31336 us | 18312 us |
| 30000 | 800384 | 457412 | 35042 us | 27386 us |
| 40000 | 1101617 | 626831 | 48779 us | 38253 us |
| 50000 | 1409762 | 799637 | 62238 us | 46950 us |
| 60000 | 1721191 | 974521 | 75588 us | 58367 us |
| 70000 | 2038536 | 1152171 | 90823 us | 68778 us |
| 80000 | 2362958 | 1333472 | 104165 us | 78625 us |
| 90000 | 2690900 | 1516065 | 116111 us | 89573 us |
| 100000| 3019413 | 1699879 | 133638 us | 100998 us |
Refs:
BOTTOM-UP-HEAPSORT, a new variant of HEAPSORT beating, on an average,
QUICKSORT (if n is not very small)
Ingo Wegener
Theoretical Computer Science, 118(1); Pages 81-98, 13 September 1993
https://doi.org/10.1016/0304-3975(93)90364-Y
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
same leaf node
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
reading the journal can take a decent amount of time compared to the
rest of fsck, let's only read it when required.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Be more explicit to the user about what we're doing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Long form version of bch2_btree_path_to_text() - useful in error
messages and tracepoints.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
small cleanup
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
debug helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
better btree node read path error messages
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- fix assorted (harmless) off-by-one errors
- we were inconsistent on whether out->pos stays <= out->size on
overflow; now it does, and printbuf.overflow exists to indicate if a
printbuf has overflowed
- factor out printbuf_advance_pos()
- printbuf_nul_terminate_reserved(); use this to reduce the number of
printbuf_make_room() calls
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to be able to test these paths in dry run mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When a superblock write is silently dropped or it's been modified by
another process we need to know which device it was.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This reverts commit c37ce764cd492f044dcdbb39616298f02b0dbc7f.
RCCL library is currently not treating spatial partitions differently,
hence this change is causing issues. Revert temporarily till RCCL
implementation is ready for spatial partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Limit the workaround introduced by commit 31729e8c21ec ("drm/amd/pm: fixes
a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path.
Cc: Tim Huang <Tim.Huang@amd.com>
Fixes: 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The read_actions_logged() and write_actions_logged() helpers called by the
sysctl proc handler seccomp_actions_logged_handler() are already expecting
their sysctl table argument to be read-only. Actually mark the argument
as const in preparation[1] for global constification of the sysctl tables.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20240423-sysctl-const-handler-v3-11-e0beccb836e2@weissschuh.net/ [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240508171337.work.861-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
[Why]
Some older MST hubs do not report DPCD registers according to
specification.
[How]
This change re-applies commit c53655545141 ("drm/amd/display: dsc mst
re-compute pbn for changes on hub").
With an additional check for these older MST devices.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This fixes a bug introduced by commit c53655545141 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL
setup. It is caused by latency varying based on the DCFCLK/FCLK state.
[How]
Enable urgent latency adjustment and match the reference to existing
ASIC that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When referencing other schema, it is preferred to use an absolute path
(/schemas/....), which allows also an seamless move of particular schema
out of Linux kernel to dtschema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240505084618.135705-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix another shift-by-64 by factoring out a common helper for
bch2_bkey_format_invalid() and bformat_needs_redo() (where it was
already fixed).
Reported-by: syzbot+9833a1d29d4a44361e2c@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Btree nodes are log structured; thus, we need to emit whiteouts when
we're deleting a key that's been written out to disk.
k->needs_whiteout tracks whether a key will need a whiteout when it's
deleted, and this requires some careful handling; e.g. the key we're
deleting may not have been written out to disk, but it may have
overwritten a key that was - thus we need to carry this flag around on
overwrites.
Invariants:
There may be multiple key for the same position in a given node (because
of overwrites), but only one of them will be a live (non deleted) key,
and only one key for a given position will have the needs_whiteout flag
set.
Additionally, we don't want to carry around whiteouts that need to be
written in the main searchable part of a btree node - btree_iter_peek()
will have to skip past them, and this can lead to an O(n^2) issues when
doing sequential deletions (e.g. inode rm/truncate). So there's a
separate region in the btree node buffer for unwritten whiteouts; these
are merge sorted with the rest of the keys we're writing in the btree
node write path.
The unwritten whiteouts was a later optimization that bch2_sort_keys()
didn't take into account; the unwritten whiteouts area means that we
never have deleted keys with needs_whiteout set in the main searchable
part of a btree node.
That means we can simplify and optimize some sort paths, and eliminate
an assertion that syzbot found:
- Unless we're in the btree node write path, it's always ok to drop
whiteouts when sorting
- When sorting for a btree node write, we drop the whiteout if it's not
from the unwritten whiteouts area, or if it's overwritten by a real
key at the same position.
This completely eliminates some tricky logic for propagating the
needs_whiteout flag: syzbot was able to hit the assertion that checked
that there shouldn't be more than one key at the same pos with
needs_whiteout set, likely due to a combination of flipping on
needs_whiteout on all written keys (they need whiteouts if overwritten),
combined with not always dropping unneeded whiteouts, and the tricky
logic in the sort path for preserving needs_whiteout that wasn't really
needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
|
|
Merely checking if the directory is encrypted happens for every open
when using ext4, at the moment refing and unrefing the parent, costing 2
atomics and serializing opens of different files.
The most common case of encryption not being used can be checked for
with RCU instead.
Sample result from open1_processes -t 20 ("Separate file open/close")
from will-it-scale on Sapphire Rapids (ops/s):
before: 12539898
after: 25575494 (+103%)
v2:
- add a comment justifying rcu usage, submitted by Eric Biggers
- whack spurious IS_ENCRYPTED check from the refed case
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240508081400.422212-1-mjguzik@gmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
There is a spelling mistake in a dev_err_probe message. Fix it.
Link: https://lore.kernel.org/linux-media/20240508081712.2868257-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
|
|
linux/vmalloc.h needs to be included explicitly nowadays. Do it.
Link: https://lore.kernel.org/linux-media/20240507123528.932421-1-sakari.ailus@linux.intel.com
Fixes: 9163d83573e4 ("media: intel/ipu6: add IPU6 DMA mapping API and MMU table")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
|
|
The first entry in the 'oneOf' schema doesn't work because the top
level schema requires exactly 8 interrupt entries. The 2nd entry is just
redundant with the top level. Since 1 entry appears to have been a
mistake, let's just drop the entire 'oneOf' rather than reworking the
top-level to allow 1 entry.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240417200431.3173953-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|