| Age | Commit message (Collapse) | Author |
|---|
|
Although we apply the params_lock mutex to the whole read and write
operations as well as snd_pcm_oss_change_params(), we may still face
some races.
First off, the params_lock is taken inside the read and write loop.
This is intentional for avoiding the too long locking, but it allows
the in-between parameter change, which might lead to invalid
pointers. We check the readiness of the stream and set up via
snd_pcm_oss_make_ready() at the beginning of read and write, but it's
called only once, by assuming that it remains ready in the rest.
Second, many ioctls that may change the actual parameters
(i.e. setting runtime->oss.params=1) aren't protected, hence they can
be processed in a half-baked state.
This patch is an attempt to plug these holes. The stream readiness
check is moved inside the read/write inner loop, so that the stream is
always set up in a proper state before further processing. Also, each
ioctl that may change the parameter is wrapped with the params_lock
for avoiding the races.
The issues were triggered by syzkaller in a few different scenarios,
particularly the one below appearing as GPF in loopback_pos_update.
Reported-by: syzbot+c4227aec125487ec3efa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mike Lothian reported that plugging in a USB-C device does not work
properly in his Dell Alienware system. This system has an Intel Alpine
Ridge Thunderbolt controller providing USB-C functionality. In these
systems the USB controller (xHCI) is hotplugged whenever a device is
connected to the port using ACPI-based hotplug.
The ACPI description of the root port in question is as follows:
Device (RP01)
{
Name (_ADR, 0x001C0000)
Device (PXSX)
{
Name (_ADR, 0x02)
Method (_RMV, 0, NotSerialized)
{
// ...
}
}
Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01)
but that seems to be incorrect because device 0 is the upstream port of the
Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge
itself). When we get ACPI Notify() to the root port resulting from
connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0,
function 2 which of course always returns 0xffffffff because there is no
such function and we never find the device.
In Windows this works fine.
Now, since we get ACPI Notify() to the root port and not to the PXSX device
we should actually start our scan from there as well and not from the
non-existent PXSX device. Fix this by checking presence of the slot itself
(function 0) if we fail to do that otherwise.
While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is
the recommended way to read Device and Vendor IDs of devices on PCI buses.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
|
|
Integrate the native DSD support quirk codes of "ITF-USB DSD" based DACs.
Now, "is_itf_usb_dsd_2alts_dac()" and "is_itf_usb_dsd_3alts_dac()" is
integrated into one function "is_itf_usb_dsd_dac()".
So, remove the logic to distinguish UD-501 and UD-501V2 by the
"Product Name".
The integration is possible by changing the following two functions.
- snd_usb_select_mode_quirk():
Change the determination condition of the DSD mode switch command,
from the altset number being used, to the audio format being played.
Actually, this operation is same as playback using ASIO driver in
Windows environment.
- snd_usb_interface_dsd_format_quirk():
To which altset supports native DSD is determined by the number of altsets.
Previously, it's a constant "2" or "3".
Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are two versions of TEAC UD-501, the normal version and
the vendor updated version(UD-501V2).
They have the same VID/PID, but the num of the altsetting is different,
UD-501 has 2 altsets for stream, and UD-501V2 has 3.
So, add the logic to distinguish them by the Product Name, not by the PID.
Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add native DSD support quirk for Luxman DA-06 DAC, by adding the
PID/VID 1852:5065.
Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()"
to cover broader device family sharing the same USB audio
implementation(*).
For the same reason, rename "is_teac_dsd_dac()" function to
"is_itf_usb_dsd_3alts_dac()".
(*)
These devices have the same USB controller "ITF-USB DSD", supplied by
INTERFACE Co., Ltd.
"ITF-USB DSD" USB controller has two patterns,
Pattern 1. (2 altsets version)
- Altset 0: for control
- Altset 1: for stream (S32)
- Altset 2: for stream (S32, DSD_U32)
Pattern 2. (3 altsets version)
- Altset 0: for control
- Altset 1: for stream (S16)
- Altset 2: for stream (S32)
- Altset 3: for stream (S32, DSD_U32)
"is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1"
USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if
"Pattern2".
Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back-merge for applying more series of fixes for USB DSD support.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add native DSD support quirk for TEAC UD-301 DAC,
by adding the PID/VID 0644:804a.
Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The udata's for alloc_pd cannot contain u64s due to alignment
constraints. Switch the two never-used u64's to arrays of u32 to reduce
the required struct alignment to 4 bytes.
These reserved fields are totally unnecessary, never written and never
read.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.infradead.org/users/jjs/linux-tpmdd into next-tpm
tpmdd updates for Linux 4.17 from Jarkko:
"This release contains only bug fixes. There are no new major features
added."
|
|
There's nothing IST-worthy about #BP/int3. We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.
Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
|
|
These types of jumps were confusing the annotate browser:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
Percent│ffffffff81a00020: swapgs
<SNIP>
│ffffffff81a00128: ↓ jae ffffffff81a00139 <syscall_return_via_sysret+0x53>
<SNIP>
│ffffffff81a00155: → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8>
I.e. the syscall_return_via_sysret function is actually "inside" the
entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53)
are relative to syscall_return_via_sysret, not to syscall_return_via_sysret.
Or this may be some artifact in how the assembler marks the start and
end of a function and how this ends up in the ELF symtab for vmlinux,
i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but
just right after it.
From readelf -sw vmlinux:
80267: ffffffff81a00020 315 NOTYPE GLOBAL DEFAULT 1 entry_SYSCALL_64
316: ffffffff81a000e6 0 NOTYPE LOCAL DEFAULT 1 syscall_return_via_sysret
0xffffffff81a00020 + 315 > 0xffffffff81a000e6
So instead of looking for offsets after that last '+' sign, calculate
offsets for jump target addresses that are inside the function being
disassembled from the absolute address, 0xffffffff81a00139 in this case,
subtracting from it the objdump address for the start of the function
being disassembled, entry_SYSCALL_64() in this case.
So, before this patch:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
Percent│ pop %r10
│ pop %r9
│ pop %r8
│ pop %rax
│ pop %rsi
│ pop %rdx
│ pop %rsi
│ mov %rsp,%rdi
│ mov %gs:0x5004,%rsp
│ pushq 0x28(%rdi)
│ pushq (%rdi)
│ push %rax
│ ↑ jmp 6c
│ mov %cr3,%rdi
│ ↑ jmp 62
│ mov %rdi,%rax
│ and $0x7ff,%rdi
│ bt %rdi,%gs:0x2219a
│ ↑ jae 53
│ btr %rdi,%gs:0x2219a
│ mov %rax,%rdi
│ ↑ jmp 5b
After:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
0.65 │ → jne swapgs_restore_regs_and_return_to_usermode
│ pop %r10
│ pop %r9
│ pop %r8
│ pop %rax
│ pop %rsi
│ pop %rdx
│ pop %rsi
│ mov %rsp,%rdi
│ mov %gs:0x5004,%rsp
│ pushq 0x28(%rdi)
│ pushq (%rdi)
│ push %rax
│ ↓ jmp 132
│ mov %cr3,%rdi
│ ┌──jmp 128
│ │ mov %rdi,%rax
│ │ and $0x7ff,%rdi
│ │ bt %rdi,%gs:0x2219a
│ │↓ jae 119
│ │ btr %rdi,%gs:0x2219a
│ │ mov %rax,%rdi
│ │↓ jmp 121
│119:│ mov %rax,%rdi
│ │ bts $0x3f,%rdi
│121:│ or $0x800,%rdi
│128:└─→or $0x1000,%rdi
│ mov %rdi,%cr3
│132: pop %rax
│ pop %rdi
│ pop %rsp
│ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8>
With those at least navigating to the right destination, an improvement
for these cases seems to be to be to somehow mark those inner functions,
which in this case could be:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
│syscall_return_via_sysret:
│ pop %r15
│ pop %r14
│ pop %r13
│ pop %r12
│ pop %rbp
│ pop %rbx
│ pop %rsi
│ pop %r10
│ pop %r9
│ pop %r8
│ pop %rax
│ pop %rsi
│ pop %rdx
│ pop %rsi
│ mov %rsp,%rdi
│ mov %gs:0x5004,%rsp
│ pushq 0x28(%rdi)
│ pushq (%rdi)
│ push %rax
│ ↓ jmp 132
│ mov %cr3,%rdi
│ ┌──jmp 128
│ │ mov %rdi,%rax
│ │ and $0x7ff,%rdi
│ │ bt %rdi,%gs:0x2219a
│ │↓ jae 119
│ │ btr %rdi,%gs:0x2219a
│ │ mov %rax,%rdi
│ │↓ jmp 121
│119:│ mov %rax,%rdi
│ │ bts $0x3f,%rdi
│121:│ or $0x800,%rdi
│128:└─→or $0x1000,%rdi
│ mov %rdi,%cr3
│132: pop %rax
│ pop %rdi
│ pop %rsp
│ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8>
This all gets much better viewed if one uses 'perf report --ignore-vmlinux'
forcing the usage of /proc/kcore + /proc/kallsyms, when the above
actually gets down to:
# perf report --ignore-vmlinux
## do '/64', will show the function names containing '64',
## navigate to /entry_SYSCALL_64_after_hwframe.annotation,
## press 'A' to annotate, then 'P' to print that annotation
## to a file
## From another xterm (or see on screen, this 'P' thing is for
## getting rid of those right side scroll bars/spaces):
# cat /entry_SYSCALL_64_after_hwframe.annotation
entry_SYSCALL_64_after_hwframe() /proc/kcore
Event: cycles:ppp
Percent
Disassembly of section load0:
ffffffff9aa00044 <load0>:
11.97 push %rax
4.85 push %rdi
push %rsi
2.59 push %rdx
2.27 push %rcx
0.32 pushq $0xffffffffffffffda
1.29 push %r8
xor %r8d,%r8d
1.62 push %r9
0.65 xor %r9d,%r9d
1.62 push %r10
xor %r10d,%r10d
5.50 push %r11
xor %r11d,%r11d
3.56 push %rbx
xor %ebx,%ebx
4.21 push %rbp
xor %ebp,%ebp
2.59 push %r12
0.97 xor %r12d,%r12d
3.24 push %r13
xor %r13d,%r13d
2.27 push %r14
xor %r14d,%r14d
4.21 push %r15
xor %r15d,%r15d
0.97 mov %rsp,%rdi
5.50 → callq do_syscall_64
14.56 mov 0x58(%rsp),%rcx
7.44 mov 0x80(%rsp),%r11
0.32 cmp %rcx,%r11
→ jne swapgs_restore_regs_and_return_to_usermode
0.32 shl $0x10,%rcx
0.32 sar $0x10,%rcx
3.24 cmp %rcx,%r11
→ jne swapgs_restore_regs_and_return_to_usermode
2.27 cmpq $0x33,0x88(%rsp)
1.29 → jne swapgs_restore_regs_and_return_to_usermode
mov 0x30(%rsp),%r11
8.74 cmp %r11,0x90(%rsp)
→ jne swapgs_restore_regs_and_return_to_usermode
0.32 test $0x10100,%r11
→ jne swapgs_restore_regs_and_return_to_usermode
0.32 cmpq $0x2b,0xa0(%rsp)
0.65 → jne swapgs_restore_regs_and_return_to_usermode
I.e. using kallsyms makes the function start/end be done differently
than using what is in the vmlinux ELF symtab and actually the hits
goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the
start of entry_SYSCALL_64:
ENTRY(entry_SYSCALL_64)
UNWIND_HINT_EMPTY
<SNIP>
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
GLOBAL(entry_SYSCALL_64_after_hwframe)
pushq %rax /* pt_regs->orig_ax */
PUSH_AND_CLEAR_REGS rax=$-ENOSYS
And it goes and ends at:
cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */
jne swapgs_restore_regs_and_return_to_usermode
/*
* We win! This label is here just for ease of understanding
* perf profiles. Nothing jumps here.
*/
syscall_return_via_sysret:
/* rcx and r11 are already restored (see code above) */
UNWIND_HINT_EMPTY
POP_REGS pop_rdi=0 skip_r11rcx=1
So perhaps some people should really just play with '--ignore-vmlinux'
to force /proc/kcore + kallsyms.
One idea is to do both, i.e. have a vmlinux annotation and a
kcore+kallsyms one, when possible, and even show the patched location,
etc.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r11knxv8voesav31xokjiuo6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
That strchr() in jump__scnprintf() needs to be nuked somehow, as it,
IIRC is already done in jump__parse() and if needed at scnprintf() time,
should be stashed in the struct filled in parse() time.
For now jus defer it to just before where it is used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j0t5hagnphoz9xw07bh3ha3g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For instance:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
5.50 │ → callq do_syscall_64
14.56 │ mov 0x58(%rsp),%rcx
7.44 │ mov 0x80(%rsp),%r11
0.32 │ cmp %rcx,%r11
│ → jne swapgs_restore_regs_and_return_to_usermode
0.32 │ shl $0x10,%rcx
0.32 │ sar $0x10,%rcx
3.24 │ cmp %rcx,%r11
│ → jne swapgs_restore_regs_and_return_to_usermode
2.27 │ cmpq $0x33,0x88(%rsp)
1.29 │ → jne swapgs_restore_regs_and_return_to_usermode
│ mov 0x30(%rsp),%r11
8.74 │ cmp %r11,0x90(%rsp)
│ → jne swapgs_restore_regs_and_return_to_usermode
0.32 │ test $0x10100,%r11
│ → jne swapgs_restore_regs_and_return_to_usermode
0.32 │ cmpq $0x2b,0xa0(%rsp)
0.65 │ → jne swapgs_restore_regs_and_return_to_usermode
It'll behave just like a "call" instruction, i.e. press enter or right
arrow over one such line and the browser will navigate to the annotated
disassembly of that function, which when exited, via left arrow or esc,
will come back to the calling function.
Now to support jump to an offset on a different function...
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-78o508mqvr8inhj63ddtw7mo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Because they all really check if we can access data structures/visual
constructs where a "jump" instruction targets code in the same function,
i.e. things like:
__pthread_mutex_lock /usr/lib64/libpthread-2.26.so
1.95 │ mov __pthread_force_elision,%ecx
│ ┌──test %ecx,%ecx
0.07 │ ├──je 60
│ │ test $0x300,%esi
│ │↓ jne 60
│ │ or $0x100,%esi
│ │ mov %esi,0x10(%rdi)
│ 42:│ mov %esi,%edx
│ │ lea 0x16(%r8),%rsi
│ │ mov %r8,%rdi
│ │ and $0x80,%edx
│ │ add $0x8,%rsp
│ │→ jmpq __lll_lock_elision
│ │ nop
0.29 │ 60:└─→and $0x80,%esi
0.07 │ mov $0x1,%edi
0.29 │ xor %eax,%eax
2.53 │ lock cmpxchg %edi,(%r8)
And not things like that "jmpq __lll_lock_elision", that instead should behave
like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3cwx39u3h66dfw9xjrlt7ca2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Python None objects are handled just like all the other objects with
respect to their reference counting. Before returning Py_None, its
reference count thus needs to be bumped.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@mellanox.com>
Link: http://lkml.kernel.org/r/b1e565ecccf68064d8d54f37db5d028dda8fa522.1521675563.git.petrm@mellanox.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Restoring multiple processes concurrently can lead to live-locks
where each process prevents the other from validating all its BOs.
v2: fix duplicate check of same variable
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
On large-BAR systems the VM page tables for compute are accessed by
the CPU. Always allow CPU access to the page directory so that it can
be used later by the CPU when a VM is converted to a compute VM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Deallocate SDMA queues during abnormal process termination and when
queue creation fails after the SDMA allocation.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Program sh_hidden_private_base_vmid correctly in the map-process
PM4 packet.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must
also be freed as PGD_ALLOCATION_ORDER pages with free_pages().
Fixes: d9e9a6418065 ("x86/mm/pti: Allocate a separate user PGD")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1521746333-19593-1-git-send-email-longman@redhat.com
|
|
Otherwise this causes unused symbol warnings for configs that build
swiotlb.c only for use by xen-swiotlb.c and that don't otherwise select
CONFIG_DMA_DIRECT_OPS, which is possible on arm.
Fixes: 16e73adbca76 ("dma/swiotlb: Remove swiotlb_{alloc,free}_coherent()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: iommu@lists.linux-foundation.org
Cc: konrad.wilk@oracle.com
Link: https://lkml.kernel.org/r/20180323174930.17767-1-hch@lst.de
|
|
"rep_done" is always zero so the "(((u64)rep_done & 0xfff) << 32)"
expression is just zero. We can remove the "res" temporary variable as
well and just use "ret" directly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 99770737ca7e ("x86/asm/tsc: Add rdtscll() merge helper") added
rdtscll() in August 2015 along with the comment:
/* Deprecated, keep it for a cycle for easier merging: */
12 cycles later it's really overdue for removal.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When punching a hole or truncating an inode down to a given size, also
check if the truncate point / start of the hole is within the range we
have metadata for. Otherwise, we can end up freeing blocks that
shouldn't be freed, corrupting the inode, or crashing the machine when
trying to punch a hole into the void.
When growing an inode via truncate, we set the new size but we don't
allocate additional levels of indirect blocks and grow the inode height.
When shrinking that inode again, the new size may still point beyond the
end of the inode's metadata.
Fixes xfstest generic/476.
Debugged-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
When debugging recent kernels, people will see '(ptrval)' but there
isn't much information as to what that means. Briefly describe why it's
there.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now that we have a new COPYING file with points to the
Linux license files, replace it with the old content.
This patch does:
1 file changed, 0 insertions(+), 0 deletions(-)
rename COPYING.new => COPYING (100%)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With the addition of SPDX patchset, the contents of COPYING file
is now duplicated at two other files under LICENSE:
LICENSES/preferred/GPL-2.0
LICENSES/exceptions/Linux-syscall-note
It is easy to check that the contents of the licence written on
those files are identical with COPYING using:
$ diff -upr COPYING LICENSES/preferred/GPL-2.0
$ diff -upr COPYING LICENSES/exceptions/Linux-syscall-note|less
Also, a new file was added, with describes how SPDX should work at
the Kernel source files:
Documentation/process/license-rules.rst
Instead fo having it copying the contents of two files, and not
even mentioning the third one, replace it by a file whose content
points to the other tree files, preserving the Kernel's license.
Adjust license-rules.rst accordingly.
Please notice that this file preserves the Kernel license as
is, without any changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"Another miscellaneous pile of MIPS fixes for 4.16:
- lantiq: fixes for clocks and Amazon SE (4.14)
- ralink: fix booting on MT7621 (4.5)
- ralink: fix halt (3.9)"
* tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: ralink: Fix booting on MT7621
MIPS: ralink: Remove ralink_halt()
MIPS: lantiq: ase: Enable MFD_SYSCON
MIPS: lantiq: Enable AHB Bus for USB
MIPS: lantiq: Fix Danube USB clock
|
|
Pull VFIO fix from Alex Williamson:
"Revert masking INTx where it cannot be enabled - it plays poorly with
SR-IOV VFs and presumes DisINTx support"
* tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio:
Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"
|
|
Pull MTD fixes from Boris Brezillon:
- Fix several problems in the fsl_ifc NAND controller driver
- Fix misuse of mtd_ooblayout_ecc() in mtdchar.c
* tag 'mtd/fixes-for-4.16-rc7' of git://git.infradead.org/linux-mtd:
mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0
mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
mtd: nand: fsl_ifc: Fix nand waitfunc return value
mtdchar: fix usage of mtd_ooblayout_ecc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small staging and IIO fixes for various reported
issues.
All of them are tiny, the majority being iio driver fixes for small
issues, and one staging driver fix for a memory corruption issue.
All have been in linux-next with no reported issues"
* tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ncpfs: memory corruption in ncp_read_kernel()
iio: st_pressure: st_accel: pass correct platform data to init
Revert "iio: accel: st_accel: remove redundant pointer pdata"
iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()
dt-bindings: iio: adc: sd-modulator: fix io-channel-cells
iio: adc: stm32-dfsdm: fix multiple channel initialization
iio: adc: stm32-dfsdm: fix clock source selection
iio: adc: stm32-dfsdm: fix call to stop channel
iio: adc: stm32-dfsdm: fix compatible data use
iio: chemical: ccs811: Corrected firmware boot/application mode transition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull hyperv fix from Greg KH:
"This is a single hyperv bugfix for 4.16-rc7.
It resolves an issue with the ring-buffer signaling to resolve
reported problems.
It's been in linux-next for a while now with no reported issues"
* tag 'char-misc-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: Fix ring buffer signaling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three fixes:
- dvb: fix a Kconfig typo on a help text
- tegra-cec: reset rx_buf_cnt when start bit detected
- rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature"
* tag 'media/v4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dvb: fix a Kconfig typo
media: tegra-cec: reset rx_buf_cnt when start bit detected
media: rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature
|
|
syzbot reported a LOCKDEP splat [1] in rt6_age_examine_exception()
rt6_age_examine_exception() is called while rt6_exception_lock is held.
This lock is the lower one in the lock hierarchy, thus we can not
call dst_neigh_lookup() function, as it can fallback to neigh_create()
We should instead do a pure RCU lookup. As a bonus we avoid
a pair of atomic operations on neigh refcount.
[1]
WARNING: possible circular locking dependency detected
4.16.0-rc4+ #277 Not tainted
syz-executor7/4015 is trying to acquire lock:
(&ndev->lock){++--}, at: [<00000000416dce19>] __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
but task is already holding lock:
(&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&tbl->lock){++-.}:
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__neigh_create+0x87e/0x1d90 net/core/neighbour.c:528
neigh_create include/net/neighbour.h:315 [inline]
ip6_neigh_lookup+0x9a7/0xba0 net/ipv6/route.c:228
dst_neigh_lookup include/net/dst.h:405 [inline]
rt6_age_examine_exception net/ipv6/route.c:1609 [inline]
rt6_age_exceptions+0x381/0x660 net/ipv6/route.c:1645
fib6_age+0xfb/0x140 net/ipv6/ip6_fib.c:2033
fib6_clean_node+0x389/0x580 net/ipv6/ip6_fib.c:1919
fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1845
fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1893
fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1970
__fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1986
fib6_clean_all net/ipv6/ip6_fib.c:1997 [inline]
fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2053
ndisc_netdev_event+0x3c2/0x4a0 net/ipv6/ndisc.c:1781
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #2 (rt6_exception_lock){+.-.}:
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:315 [inline]
rt6_flush_exceptions+0x21/0x210 net/ipv6/route.c:1367
fib6_del_route net/ipv6/ip6_fib.c:1677 [inline]
fib6_del+0x624/0x12c0 net/ipv6/ip6_fib.c:1761
__ip6_del_rt+0xc7/0x120 net/ipv6/route.c:2980
ip6_del_rt+0x132/0x1a0 net/ipv6/route.c:2993
__ipv6_dev_ac_dec+0x3b1/0x600 net/ipv6/anycast.c:332
ipv6_dev_ac_dec net/ipv6/anycast.c:345 [inline]
ipv6_sock_ac_close+0x2b4/0x3e0 net/ipv6/anycast.c:200
inet6_release+0x48/0x70 net/ipv6/af_inet6.c:433
sock_release+0x8d/0x1e0 net/socket.c:594
sock_close+0x16/0x20 net/socket.c:1149
__fput+0x327/0x7e0 fs/file_table.c:209
____fput+0x15/0x20 fs/file_table.c:243
task_work_run+0x199/0x270 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x9bb/0x1ad0 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:968
get_signal+0x73a/0x16d0 kernel/signal.c:2469
do_signal+0x90/0x1e90 arch/x86/kernel/signal.c:809
exit_to_usermode_loop+0x258/0x2f0 arch/x86/entry/common.c:162
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
do_syscall_64+0x6ec/0x940 arch/x86/entry/common.c:292
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #1 (&(&tb->tb6_lock)->rlock){+.-.}:
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:315 [inline]
__ip6_ins_rt+0x56/0x90 net/ipv6/route.c:1007
ip6_route_add+0x141/0x190 net/ipv6/route.c:2955
addrconf_prefix_route+0x44f/0x620 net/ipv6/addrconf.c:2359
fixup_permanent_addr net/ipv6/addrconf.c:3368 [inline]
addrconf_permanent_addr net/ipv6/addrconf.c:3391 [inline]
addrconf_notify+0x1ad2/0x2310 net/ipv6/addrconf.c:3460
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x15d/0x430 net/core/dev.c:6958
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
do_setlink+0xa22/0x3bb0 net/core/rtnetlink.c:2357
rtnl_newlink+0xf37/0x1a50 net/core/rtnetlink.c:2965
rtnetlink_rcv_msg+0x57f/0xb10 net/core/rtnetlink.c:4641
netlink_rcv_skb+0x14b/0x380 net/netlink/af_netlink.c:2444
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4659
netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline]
netlink_unicast+0x4c4/0x6b0 net/netlink/af_netlink.c:1334
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:639
___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
__sys_sendmsg+0xe5/0x210 net/socket.c:2081
SYSC_sendmsg net/socket.c:2092 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2088
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #0 (&ndev->lock){++--}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
pneigh_ifdown net/core/neighbour.c:695 [inline]
neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
other info that might help us debug this:
Chain exists of:
&ndev->lock --> rt6_exception_lock --> &tbl->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&tbl->lock);
lock(rt6_exception_lock);
lock(&tbl->lock);
lock(&ndev->lock);
*** DEADLOCK ***
2 locks held by syz-executor7/4015:
#0: (rtnl_mutex){+.+.}, at: [<00000000a2f16daa>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
#1: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292
stack backtrace:
CPU: 0 PID: 4015 Comm: syz-executor7 Not tainted 4.16.0-rc4+ #277
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_circular_bug.isra.38+0x2cd/0x2dc kernel/locking/lockdep.c:1223
check_prev_add kernel/locking/lockdep.c:1863 [inline]
check_prevs_add kernel/locking/lockdep.c:1976 [inline]
validate_chain kernel/locking/lockdep.c:2417 [inline]
__lock_acquire+0x30a8/0x3e00 kernel/locking/lockdep.c:3431
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
pneigh_ifdown net/core/neighbour.c:695 [inline]
neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes: c757faa8bfa2 ("ipv6: prepare fib6_age() for exception table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add struct kvm_svm, which is analagous to struct vcpu_svm, along with
a helper to_kvm_svm() to retrieve kvm_svm from a struct kvm *. Move
the SVM specific variables and struct definitions out of kvm_arch
and into kvm_svm.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add struct kvm_vmx, which wraps struct kvm, and a helper to_kvm_vmx()
that retrieves 'struct kvm_vmx *' from 'struct kvm *'. Move the VMX
specific variables out of kvm_arch and into kvm_vmx.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add kvm_x86_ops->set_identity_map_addr and set ept_identity_map_addr
in VMX specific code so that ept_identity_map_addr can be moved out
of 'struct kvm_arch' in a future patch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define kvm_arch_[alloc|free]_vm in x86 as pass through functions
to new kvm_x86_ops vm_alloc and vm_free, and move the current
allocation logic as-is to SVM and VMX. Vendor specific alloc/free
functions set the stage for SVM/VMX wrappers of 'struct kvm',
which will allow us to move the growing number of SVM/VMX specific
member variables out of 'struct kvm_arch'.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Segment registers must be synchronized prior to any code that may
trigger a call to emulation_required()/guest_state_valid(), e.g.
vmx_set_cr0(). Because preparing vmcs02 writes segmentation fields
directly, i.e. doesn't use vmx_set_segment(), emulation_required
will not be re-evaluated when synchronizing the segment registers,
which can result in L0 incorrectly starting emulation of L2.
Fixes: 8665c3f97320 ("KVM: nVMX: initialize descriptor cache fields in prepare_vmcs02_full")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Move all of prepare_vmcs02_full earlier, not just segment registers. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fix -
Fix a bug causing occasional machine check exceptions on POWER8 hosts,
introduced in 4.16-rc1.
|
|
The phys embedded into the v1.1 of the VR9 SoC are using different phy
ids. Add the phy ids to use the driver for this VR9 version as well.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VR9 phy ids are matching only for the SoC version 1.2. Rename the
macros and change the names to take this into account.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: 2bfbd35d8ecd ("net: hns3: Changes required in PF mailbox to support VF reset")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things look calming down, but people were still busy to plaster over
small holes:
- Two fixes to harden against races in aloop driver
- A correction of a long-standing bug in USB-audio UAC2 processing
unit parser
- As usual suspects, HD-audio: a workaround for Coffee Lake
controller and a few other device-specific fixes
All small and for stable"
* tag 'sound-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: aloop: Fix access to not-yet-ready substream via cable
ALSA: aloop: Sync stale timer before release
ALSA: hda/realtek - Fix speaker no sound after system resume
ALSA: hda/realtek - Fix Dell headset Mic can't record
ALSA: hda - Force polling mode on CFL for fixing codec communication
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
ALSA: hda/realtek - Always immediately update mute LED with pin VREF
|
|
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is useful to rdma ULPs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Jon Maloy says:
====================
tipc: introduce 128-bit auto-configurable node id
We introduce a 128-bit free-format node identity as an alternative to
the legacy <Zone.Cluster.Node> structured 32-bit node address.
We also make configuration of this identity optional; if a bearer is
enabled without a pre-configured node id it will be set automatically
based on the used interface's MAC or IP address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Selecting and explicitly configuring a TIPC node identity may be
unwanted in some cases.
In this commit we introduce a default setting if the identity has not
been set at the moment the first bearer is enabled. We do this by
using a raw copy of a unique identifier from the used interface: MAC
address in the case of an L2 bearer, IPv4/IPv6 address in the case
of a UDP bearer.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a 32-bit node address is generated from a 128-bit identifier,
there is a risk of collisions which must be discovered and handled.
We do this as follows:
- We don't apply the generated address immediately to the node, but do
instead initiate a 1 sec trial period to allow other cluster members
to discover and handle such collisions.
- During the trial period the node periodically sends out a new type
of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast,
to all the other nodes in the cluster.
- When a node is receiving such a message, it must check that the
presented 32-bit identifier either is unused, or was used by the very
same peer in a previous session. In both cases it accepts the request
by not responding to it.
- If it finds that the same node has been up before using a different
address, it responds with a DSC_TRIAL_FAIL_MSG containing that
address.
- If it finds that the address has already been taken by some other
node, it generates a new, unused address and returns it to the
requester.
- During the trial period the requesting node must always be prepared
to accept a failure message, i.e., a message where a peer suggests a
different (or equal) address to the one tried. In those cases it
must apply the suggested value as trial address and restart the trial
period.
This algorithm ensures that in the vast majority of cases a node will
have the same address before and after a reboot. If a legacy user
configures the address explicitly, there will be no trial period and
messages, so this protocol addition is completely backwards compatible.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
