| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.14-rc1
- add new compatibles for at24 variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)
|
|
This old driver has never been used on big-endian systems, so remove the
todo.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Atharva Tiwari <evepolonium@gmail.com>
[wsa: reworded commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This reverts commit 70f3d3669c074efbcee32867a1ab71f5f7ead385. We
concluded that removing the comments is the right thing to do. This will
be done by an incremental patch.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Andi is unavailable for some time. So, I take over his work for this
mergewindow.
|
|
As discussed in [0], rehash4 could be missed in udp_lib_rehash() when
udp hash4 changes while hash2 doesn't change. This patch fixes this by
moving rehash4 codes out of rehash2 checking, and then rehash2 and
rehash4 are done separately.
By doing this, we no longer need to call rehash4 explicitly in
udp_lib_hash4(), as the rehash callback in __ip4_datagram_connect takes
it. Thus, now udp_lib_hash4() returns directly if the sk is already
hashed.
Note that uhash4 may fail to work under consecutive connect(<dst
address>) calls because rehash() is not called with every connect(). To
overcome this, connect(<AF_UNSPEC>) needs to be called after the next
connect to a new destination.
[0]
https://lore.kernel.org/all/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com/
Fixes: 78c91ae2c6de ("ipv4/udp: Add 4-tuple hash for connected socket")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://patch.msgid.link/20250110010810.107145-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dev_deactivate_many() role is to remove the qdiscs
of a network device.
When/if a qdisc is dismantled, an rcu grace period
is needed to make sure all outstanding qdisc enqueue
are done before we proceed with a qdisc reset.
Most virtual devices do not have a qdisc.
We can call the expensive synchronize_net() only
if needed.
Note that dev_deactivate_many() does not have to deal
with qdisc-less dev_queue_xmit, as an old comment
was claiming.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250109171850.2871194-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add dependency to ACPI to avoid acpi APIs missing in um mode.
Signed-off-by: Even Xu <even.xu@intel.com>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501131826.sX2DubPG-lkp@intel.com
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f
Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit ed3a892e5e3d6b3f6eeb76db7c92a968aeb52f3d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The temperature sensor is actually part of the integrated PHY and available
also on the standalone versions of the PHY. Therefore hwmon support will
be added to the Realtek PHY driver and can be removed here.
Fixes: 1ffcc8d41306 ("r8169: add support for the temperature sensor being available from RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/afba85f5-987b-4449-83cc-350438af7fe7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5 HW-Managed Flow Steering in FS core level
This patchset by Moshe follows Yevgeny's patchsets [1][2] on subject
"HW-Managed Flow Steering in mlx5 driver". As introduced there in HW
managed Flow Steering mode (HWS) the driver is configuring steering
rules directly to the HW using WQs with a special new type of WQE (Work
Queue Element). This way we can reach higher rule insertion/deletion
rate with much lower CPU utilization compared to SW Managed Flow
Steering (SWS).
This patchset adds API to manage namespace, flow tables, flow groups and
prepare FTE (Flow Table Entry) rules. It also adds caching and pool
mechanisms for HWS actions to allow sharing of steering actions among
different rules. The implementation of this API in FS layer, allows FS
core to use HW Managed Flow Steering in addition to the existing FW or
SW Managed Flow Steering.
Patch 13 of this series adds support for configuring HW Managed Flow
Steering mode through devlink param, similar to configuring SW Managed
Flow Steering mode:
# devlink dev param set pci/0000:08:00.0 name flow_steering_mode \
cmode runtime value hmfs
In addition, the series contains 2 HWS patches from Yevgeny that
implement flow update support.
[1] https://lore.kernel.org/netdev/20240903031948.78006-1-saeed@kernel.org/
[2] https://lore.kernel.org/all/20250102181415.1477316-1-tariqt@nvidia.com/
====================
Link: https://patch.msgid.link/20250109160546.1733647-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is the second part of update flow implementation.
Instead of using two action RTCs, we use the same RTC which is twice
the size of what was required before the update flow support.
This way we always allocate STEs from the same RTC (same pool),
which means that update is done similar to how create is done.
The bigger size allows us to allocate and write new STEs, and
later free the old (pre-update) STEs.
Similar to rule creation, STEs are written in reverse order:
- write action STEs, while match STE is still pointing to
the old action STEs
- overwrite the match STE with the new one, which now
is pointing to the new action STEs
Old action STEs can be freed only once we got completion on the
writing of the new match STE. To implement this we added new rule
states: UPDATING/UPDATED. Rule is moved to UPDATING state in the
beginning of the update flow. Once all completions are received,
rule is moved to UPDATED state. At this point old action STEs are
freed and rule goes back to CREATED state.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is the first part of update flow implementation.
Update flow should support rules with single STE (match STE only),
as well as rules with multiple STEs (match STE plus action STEs).
Supporting the rules with single STE is straightforward: we just
overwrite the STE, which is an atomic operation.
Supporting the rules with action STEs is a more complicated case.
The existing implementation uses two action RTCs per matcher and
alternates between the two for each update request.
This implementation was unnecessarily complex and lead to some
unhandled edge cases, so the support for rule update with multiple
STEs wasn't really functional.
This patch removes this code, and the next patch adds implementation
of a different approach.
Note that after applying this patch and before applying the next
patch we still have support for update rule with single STE (only
match STE w/o action STEs), but update will fail for rules with
action STEs.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-15-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add HW Steering mode to mlx5 devlink param of steering mode options.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add API function get capabilities to HW Steering flow commands.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently HW Steering does not support the API functions of create and
destroy match definer. Return not supported error in case requested.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for HW Steering action of vport destination. Add dest vport
actions cache. Hold action in cache per vport / vport and vhca_id. Add
action to cache on demand and remove on namespace closure to reduce
actions creation and destroy.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add create, destroy and update fte API functions for adding, removing
and updating flow steering rules in HW Steering mode. Get HWS actions
according to required rule, use actions from pool whenever possible.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add cache of destination flow table HWS action per HWS table. For each
flow table created cache a destination action towards this table. The
cached action will be used on the downstream patch whenever a rule
requires such action.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple flow counters can utilize a single Hardware Steering (HWS)
action for Hardware Steering rules. Given that these counter bulks are
not exclusively created for Hardware Steering, but also serve purposes
such as statistics gathering and other steering modes, it's more
efficient to create the HWS action only when it's first needed by a
Hardware Steering rule. This approach allows for better resource
management through the use of a reference count, rather than
automatically creating an HWS action for every bulk of flow counters.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add modify header alloc and dealloc API functions to provide modify
header actions for steering rules. Use fs hws pools to get actions from
shared bulks of modify header actions.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add packet reformat alloc and dealloc API functions to provide packet
reformat actions for steering rules.
Add HWS action pools for each of the following packet reformat types:
- decapl3: decapsulate l3 tunnel to l2
- encapl2: encapsulate l2 to tunnel l2
- encapl3: encapsulate l2 to tunnel l3
- insert_hdr: insert header
In addition cache remove header action for remove vlan header as this is
currently the only use case of remove header action in the driver.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The HW Steering actions pool will help utilize the option in HW Steering
to share steering actions among different rules.
Create pool on root namespace creation and add few HW Steering actions
that don't depend on the steering rule itself and thus can be shared
between rules, created on same namespace: tag, pop_vlan, push_vlan,
drop, decap l2.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add API functions to create and destroy HW Steering flow groups. Each
flow group consists of a Backward Compatible (BWC) HW Steering matcher
which holds the flow group match criteria.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add API functions to create, modify and destroy HW Steering flow tables.
Modify table enables change, connect or disconnect default miss table.
Add update root flow table API function.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add flow steering commands structure for HW steering. Implement create,
destroy and set peer HW steering root namespace functions.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109160546.1733647-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iavf uses the netdev->lock already to protect shapers.
In an upcoming series we'll try to protect NAPI instances
with netdev->lock.
We need to modify the protection a bit. All NAPI related
calls in the driver need to be consistently under the lock.
This will allow us to easily switch to a "we already hold
the lock" NAPI API later.
register_netdevice(), OTOH, must not be called under
the netdev_lock() as we do not intend to have an
"already locked" version of this call.
Link: https://patch.msgid.link/20250111071339.3709071-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_dummy_netdev_core() used to cater to net_devices which
did not come from alloc_netdev_mqs(). Since that's no longer
supported remove the init logic which duplicates alloc_netdev_mqs().
While at it rename back to init_dummy_netdev().
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace hard-coded paths for spec and schema with lookup functions so
that ethtool.py will work in-tree or when installed.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250111154803.7496-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a --family option to ynl to specify the spec by family name instead
of file path, with support for searching in-tree and system install
location and a --list-families option to show the available families.
./tools/net/ynl/pyynl/cli.py --family rt_addr --dump getaddr
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250111154803.7496-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I don't see any reason why napi_enable() needs to be under the lock,
only reason I could think of is if the IRQ also took this lock
but it doesn't. napi_enable() will soon need to sleep.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250111024742.3680902-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250109155842.60798-1-rgallaispou@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Obtaining RTNL lock in a response handler is not allowed since it runs
in an atomic softirq context. Postpone setting the MAC address by adding
a dedicated step to the configuration FSM.
Fixes: 790071347a0a ("net/ncsi: change from ndo_set_mac_address to dev_set_mac_address")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20241129-potin-revert-ncsi-set-mac-addr-v1-1-94ea2cb596af@gmail.com
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://patch.msgid.link/20250109145054.30925-1-fercerpav@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When recvmsg with MSG_PEEK flag, the data will be copied to
user's buffer without advancing consume cursor and without
reducing the length of rx available data. Once the expected
peek length is larger than the value of bytes_to_rcv, in the
loop of do while in smc_rx_recvmsg, the first loop will copy
bytes_to_rcv bytes of data from the position local_tx_ctrl.cons,
the second loop will copy the min(bytes_to_rcv, read_remaining)
bytes from the position local_tx_ctrl.cons again because of the
lacking of process with advancing consume cursor and reducing
the length of available data. So do the subsequent loops. The
data copied in the second loop and the subsequent loops will
result in data error, as it should not be copied if no more data
arrives and it should be copied from the position advancing
bytes_to_rcv bytes from the local_tx_ctrl.cons if more data arrives.
This issue can be reproduce by the following python script:
server.py:
import socket
import time
server_ip = '0.0.0.0'
server_port = 12346
server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_socket.bind((server_ip, server_port))
server_socket.listen(1)
print('Server is running and listening for connections...')
conn, addr = server_socket.accept()
print('Connected by', addr)
while True:
data = conn.recv(1024)
if not data:
break
print('Received request:', data.decode())
conn.sendall(b'Hello, client!\n')
time.sleep(5)
conn.sendall(b'Hello, again!\n')
conn.close()
client.py:
import socket
server_ip = '<server ip>'
server_port = 12346
resp=b'Hello, client!\nHello, again!\n'
client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
client_socket.connect((server_ip, server_port))
request = 'Hello, server!'
client_socket.sendall(request.encode())
peek_data = client_socket.recv(len(resp),
socket.MSG_PEEK | socket.MSG_WAITALL)
print('Peeked data:', peek_data.decode())
client_socket.close()
Fixes: 952310ccf2d8 ("smc: receive data from RMBE")
Reported-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20250104143201.35529-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add clock for eMMC for EN7581. This is used to give info of the current
eMMC source clock and to switch it from 200MHz or 150MHz.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20250113231030.6735-5-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add ID for eMMC for EN7581. This is to control clock selection of eMMC
between 200MHz and 150MHz.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250113231030.6735-4-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Drop NUM_CLOCKS define for EN7581 include. This is not a binding and
should not be placed here. Value is derived internally in the user
driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250113231030.6735-3-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Airoha EN7581 SoC have additional clock compared to EN7523 but current
driver permits to only support up to EN7523 clock numbers.
To handle this, rework the clock handling and permit to declare the
clocks number in match_data and alloca clk_data based on the compatible
match_data.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20250113231030.6735-2-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
"tools/cpupower: display residency value in idle-info" added a new
function to cpuidle.h. This patch adds them to the bindings.
Link: https://lore.kernel.org/linux-pm/20240809083728.266697-1-aboorvad@linux.ibm.com/
Tested by compiling both libcpupower and the headers; running the test
script that does not use the functions as a basic sanity test.
Link: https://lore.kernel.org/r/20250108221852.30771-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The UserSliceReader::read_all function is currently restricted to use
only Vec with the kmalloc allocator. However, there is no reason for
this limitation.
This patch generalizes the function to accept any Vec regardless of the
allocator used.
There's a use-case for a KVVec in Binder to avoid maximum sizes for a
certain array.
Link: https://github.com/Rust-for-Linux/linux/issues/1136
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250107-gen-userslice-readall-alloc-v2-1-d7fe4d19241a@gmail.com
[ Reflowed and slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Previously, the `ForeignOwnable` trait had a method called `borrow_mut`
that was intended to provide mutable access to the inner value. However,
the method accidentally made it possible to change the address of the
object being modified, which usually isn't what we want. (And when we
want that, it can be done by calling `from_foreign` and `into_foreign`,
like how the old `borrow_mut` was implemented.)
In this patch, we introduce an alternate definition of `borrow_mut` that
solves the previous problem. Conceptually, given a pointer type `P` that
implements `ForeignOwnable`, the `borrow_mut` method gives you the same
kind of access as an `&mut P` would, except that it does not let you
change the pointer `P` itself.
This is analogous to how the existing `borrow` method provides the same
kind of access to the inner value as an `&P`.
Note that for types like `Arc`, having an `&mut Arc<T>` only gives you
immutable access to the inner `T`. This is because mutable references
assume exclusive access, but there might be other handles to the same
reference counted value, so the access isn't exclusive. The `Arc` type
implements this by making `borrow_mut` return the same type as `borrow`.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-6-80dbadd00951@gmail.com
[ Updated to `crate::ffi::`. Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`{into,from}_foreign` before `borrow` is slightly more logical.
This removes an inconsistency with `kbox.rs` which already uses this
ordering.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-5-80dbadd00951@gmail.com
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It is slightly more convenient to operate on mut pointers, and this also
properly conveys the desired ownership semantics of the trait.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-4-80dbadd00951@gmail.com
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The new SAFETY comment style is taken from existing comments in `deref`
and `drop.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-3-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Replace `as` casts with `cast{,_mut}` calls which are a bit safer.
In one instance, remove an unnecessary `as` cast without replacement.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-2-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
There is no need to check (and panic on violations of) the safety
requirements on `ForeignOwnable` functions. Avoiding the check is
consistent with the implementation of `ForeignOwnable` for `Box`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-1-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `kernel` crate relies on both `coerce_unsized` and `dispatch_from_dyn`
unstable features.
Alice Ryhl has proposed [1] the introduction of the unstable macro
`SmartPointer` to reduce such dependence, along with a RFC patch [2].
Since Rust 1.81.0 this macro, later renamed to `CoercePointee` in
Rust 1.84.0 [3], has been fully implemented with the naming discussion
resolved.
This feature is now on track to stabilization in the language.
In order to do so, we shall start using this macro in the `kernel` crate
to prove the functionality and utility of the macro as the justification
of its stabilization.
This patch makes this switch in such a way that the crate remains
backward compatible with older Rust compiler versions,
via the new Kconfig option `RUSTC_HAS_COERCE_POINTEE`.
A minimal demonstration example is added to the
`samples/rust/rust_print_main.rs` module.
Link: https://rust-lang.github.io/rfcs/3621-derive-smart-pointer.html [1]
Link: https://lore.kernel.org/all/20240823-derive-smart-pointer-v1-1-53769cd37239@google.com/ [2]
Link: https://github.com/rust-lang/rust/pull/131284 [3]
Signed-off-by: Xiangfei Ding <dingxiangfei2009@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241203205050.679106-2-dingxiangfei2009@gmail.com
[ Fixed version to 1.84. Renamed option to `RUSTC_HAS_COERCE_POINTEE`
to match `CC_HAS_*` ones. Moved up new config option, closer to the
`CC_HAS_*` ones. Simplified Kconfig line. Fixed typos and slightly
reworded example and commit. Added Link to PR. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a rustdoc example and Kunit test to the `ArrayLayout` struct's
`ArrayLayout::new()` function.
This patch depends on the first patch in this series in order for the
KUnit test to compile.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1131
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/f1564da5bcaa6be87aee312767a1d1694a03d1b7.1734674670.git.jtostler1@gmail.com
[ Added periods to example comments. Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Change documentation imports to use `kernel::alloc::AllocError`,
because `KBox::new()` now returns that, instead of the `core`'s
`AllocError`.
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/ec8badbe94c5e78f22315325a7f2ae96129d6a65.1734674670.git.jtostler1@gmail.com
[ Fixed formatting of imports (still unordered). Slightly reworded
commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Import the internal (`kernel::alloc`) version of `LayoutError` instead
of the `core::alloc` one.
In particular, this results in switching the type in the existing
`From<LayoutError> for Error` implementation.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/fe58a02189e8804a9eabdd01cb1927d4c491d79c.1734674670.git.jtostler1@gmail.com
[ Reworded commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
