summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-01net: use flow_indr_dev_setup_offload()Pablo Neira Ayuso
Update existing frontends to use flow_indr_dev_setup_offload(). This new function must be called if ->ndo_setup_tc is unset to deal with tunnel devices. If there is no driver that is subscribed to new tunnel device flow_block bindings, then this function bails out with EOPNOTSUPP. If the driver module is removed, the ->cleanup() callback removes the entries that belong to this tunnel device. This cleanup procedures is triggered when the device unregisters the tunnel device offload handler. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01net: cls_api: add tcf_block_offload_init()Pablo Neira Ayuso
Add a helper function to initialize the flow_block_offload structure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01net: flow_offload: consolidate indirect flow_block infrastructurePablo Neira Ayuso
Tunnel devices provide no dev->netdev_ops->ndo_setup_tc(...) interface. The tunnel device and route control plane does not provide an obvious way to relate tunnel and physical devices. This patch allows drivers to register a tunnel device offload handler for the tc and netfilter frontends through flow_indr_dev_register() and flow_indr_dev_unregister(). The frontend calls flow_indr_dev_setup_offload() that iterates over the list of drivers that are offering tunnel device hardware offload support and it sets up the flow block for this tunnel device. If the driver module is removed, the indirect flow_block ends up with a stale callback reference. The module removal path triggers the dev_shutdown() path to remove the qdisc and the flow_blocks for the physical devices. However, this is not useful for tunnel devices, where relation between the physical and the tunnel device is not explicit. This patch introduces a cleanup callback that is invoked when the driver module is removed to clean up the tunnel device flow_block. This patch defines struct flow_block_indr and it uses it from flow_block_cb to store the information that front-end requires to perform the flow_block_cb cleanup on module removal. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01netfilter: nf_flowtable: expose nf_flow_table_gc_cleanup()Pablo Neira Ayuso
This function schedules the flow teardown state and it forces a gc run. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01Merge tag 'regmap-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This has been a very active release for the regmap API for some reason, a lot of it due to new devices with odd requirements that can sensibly be handled here. - Add support for buses implementing a custom reg_update_bits() method in case the bus has a native operation for this. - Support 16 bit register addresses in SMBus. - Allow customization of the device attached to regmap-irq. - Helpers for bitfield operations and per-port field initializations" * tag 'regmap-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: provide helpers for simple bit operations regmap: add helper for per-port regfield initialization regmap-i2c: add 16-bit width registers support regmap: Simplify implementation of the regmap_field_read_poll_timeout() macro regmap: Simplify implementation of the regmap_read_poll_timeout() macro regmap: add reg_sequence helpers regmap-irq: make it possible to add irq_chip do a specific device node regmap: Add bus reg_update_bits() support regmap: debugfs: check count when read regmap file
2020-06-01net/sched: fix a couple of splats in the error path of tfc_gate_init()Davide Caratti
trying to configure TC 'act_gate' rules with invalid control actions, the following splat can be observed: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 2143 Comm: tc Not tainted 5.7.0-rc6+ #168 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:hrtimer_active+0x56/0x290 [...] Call Trace: hrtimer_try_to_cancel+0x6d/0x330 hrtimer_cancel+0x11/0x20 tcf_gate_cleanup+0x15/0x30 [act_gate] tcf_action_cleanup+0x58/0x170 __tcf_action_put+0xb0/0xe0 __tcf_idr_release+0x68/0x90 tcf_gate_init+0x7c7/0x19a0 [act_gate] tcf_action_init_1+0x60f/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 this is caused by hrtimer_cancel(), running before hrtimer_init(). Fix it ensuring to call hrtimer_cancel() only if clockid is valid, and the timer has been initialized. After fixing this splat, the same error path causes another problem: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 980 Comm: tc Not tainted 5.7.0-rc6+ #168 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:release_entry_list+0x4a/0x240 [act_gate] [...] Call Trace: tcf_action_cleanup+0x58/0x170 __tcf_action_put+0xb0/0xe0 __tcf_idr_release+0x68/0x90 tcf_gate_init+0x7ab/0x19a0 [act_gate] tcf_action_init_1+0x60f/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 the problem is similar: tcf_action_cleanup() was trying to release a list without initializing it first. Ensure that INIT_LIST_HEAD() is called for every newly created 'act_gate' action, same as what was done to 'act_ife' with commit 44c23d71599f ("net/sched: act_ife: initalize ife->metalist earlier"). Fixes: a51c328df310 ("net: qos: introduce a gate control flow action") CC: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 supportDmitry Panchenko
Pioneer DJ DJM-900NXS2 is a widely used DJ mixer with 2 audio USB interfaces. Both have a MIDI controller, 10 playback and 12 capture channels. Audio endpoints are vendor-specific and 3 files need to be patched. All playback and capture channels work fine with all supported sample rates (44.1k, 48k, 96k). Patches are attached. Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee> Link: https://lore.kernel.org/r/48ab19ff-3303-9bf8-ed0e-bcb31d8537eb@d-systems.ee Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-06-01Merge branch 'regmap-simple-bit-helpers'David S. Miller
Bartosz Golaszewski says: ==================== regmap: provide simple bitops and use them in a driver I noticed that oftentimes I use regmap_update_bits() for simple bit setting or clearing. In this case the fourth argument is superfluous as it's always 0 or equal to the mask argument. This series proposes to add simple bit operations for setting, clearing and testing specific bits with regmap. The second patch uses all three in a driver that got recently picked into the net-next tree. The patches obviously target different trees so - if you're ok with the change itself - I propose you pick the first one into your regmap tree for v5.8 and then I'll resend the second patch to add the first user for these macros for v5.9. v1 -> v2: - convert the new macros to static inline functions v2 -> v3: - drop unneeded ternary operator ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01net: ethernet: mtk-star-emac: use regmap bitopsBartosz Golaszewski
Shrink the code visually by replacing regmap_update_bits() with appropriate regmap bit operations where applicable. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01regmap: provide helpers for simple bit operationsBartosz Golaszewski
In many instances regmap_update_bits() is used for simple bit setting and clearing. In these cases the last argument is redundant and we can hide it with a static inline function. This adds three new helpers for simple bit operations: set_bits, clear_bits and test_bits (the last one defined as a regular function). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01Merge tag 'hwmon-for-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Infrastructure: - Add notification support New drivers: - Baikal-T1 PVT sensor driver - amd_energy driver to report energy counters - Driver for Maxim MAX16601 - Gateworks System Controller Various: - applesmc: avoid overlong udelay() - dell-smm: Use one DMI match for all XPS models - ina2xx: Implement alert functions - lm70: Add support for ACPI - lm75: Fix coding-style warnings - lm90: Add max6654 support to lm90 driver - nct7802: Replace container_of() API - nct7904: Set default timeout - nct7904: Add watchdog function - pmbus: Improve initialization of 'currpage' and 'currphase'" * tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits) hwmon: Add Baikal-T1 PVT sensor driver hwmon: Add notification support dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding hwmon: (applesmc) avoid overlong udelay() hwmon: (nct7904) Set default timeout hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init() MAINTAINERS: add entry for AMD energy driver hwmon: (amd_energy) Add documentation hwmon: Add amd_energy driver to report energy counters hwmon: (nct7802) Replace container_of() API hwmon: (lm90) Add max6654 support to lm90 driver hwmon : (nct6775) Use kobj_to_dev() API hwmon: (pmbus) Driver for Maxim MAX16601 hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase' hwmon: (adt7411) update contact email hwmon: (lm75) Fix all coding-style warnings on lm75 driver hwmon: Reduce indentation level in __hwmon_device_register() hwmon: (ina2xx) Implement alert functions hwmon: (lm70) Add support for ACPI hwmon: (dell-smm) Use one DMI match for all XPS models ...
2020-06-01cxgb4: cleanup error code in setup_sge_queues_uld()Dan Carpenter
The caller doesn't care about the error codes, they only check for zero vs non-zero. Still, it's better to preserve the negative error codes from alloc_uld_rxqs() instead of changing it to 1. We can also return directly if there is a failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01Merge tag 'tpmdd-next-20200522' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm updates from Jarkko Sakkinen. * tag 'tpmdd-next-20200522' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: eventlog: Replace zero-length array with flexible-array member tpm/tpm_ftpm_tee: Use UUID API for exporting the UUID
2020-06-01Merge tag 'asoc-v5.8' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.8 This has been another very active release with a bunch of new drivers, lots of fixes everywhere and continued core improvements from Morimoto-san: - Lots of core cleanups and refactorings from Morimoto-san, factoring out common operations and making the card abstraction more solid. - Continued work on cleaning up and improving the Intel drivers, along with some new platform support for them. - Fixes to make the Marvell SSPA driver work upstream. - Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and NAU8814 and Realtek RT1016.
2020-06-01Merge branch 'Fix-infinite-loop-in-bridge-and-vxlan-modules'David S. Miller
Ido Schimmel says: ==================== Fix infinite loop in bridge and vxlan modules When suppressing invalid IPv6 Neighbour Solicitation messages, it is possible for the bridge and vxlan modules to get stuck in an infinite loop. See the individual changelogs for detailed explanation of the problem and solution. The bug was originally reported against the bridge module, but after auditing the code base I found that the buggy code was copied from the vxlan module. This patch set fixes both modules. Could not find more instances of the problem. Please consider both patches for stable releases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01vxlan: Avoid infinite loop when suppressing NS messages with invalid optionsIdo Schimmel
When proxy mode is enabled the vxlan device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts. In case the NS message includes the "Source link-layer address" option [1], the vxlan device will use the specified address as the link-layer destination address in its reply. To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message. This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2]. [1] https://tools.ietf.org/html/rfc4861#section-4.3 [2] https://tools.ietf.org/html/rfc4861#section-4.6 Fixes: 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01bridge: Avoid infinite loop when suppressing NS messages with invalid optionsIdo Schimmel
When neighbor suppression is enabled the bridge device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts. In case the NS message includes the "Source link-layer address" option [1], the bridge device will use the specified address as the link-layer destination address in its reply. To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message. This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2]. [1] https://tools.ietf.org/html/rfc4861#section-4.3 [2] https://tools.ietf.org/html/rfc4861#section-4.6 Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alla Segal <allas@mellanox.com> Tested-by: Alla Segal <allas@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01ipv4: nexthop: Fix deadcode issue by performing a proper NULL checkPatrick Eigensatz
After allocating the spare nexthop group it should be tested for kzalloc() returning NULL, instead the already used nexthop group (which cannot be NULL at this point) had been tested so far. Additionally, if kzalloc() fails, return ERR_PTR(-ENOMEM) instead of NULL. Coverity-id: 1463885 Reported-by: Coverity <scan-admin@coverity.com> Signed-off-by: Patrick Eigensatz <patrickeigensatz@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-06-01 Here's one last bluetooth-next pull request for 5.8, which I hope can still be accepted. - Enabled Wide-Band Speech (WBS) support for Qualcomm wcn3991 - Multiple fixes/imprvovements to Qualcomm-based devices - Fix GAP/SEC/SEM/BI-10-C qualfication test case - Added support for Broadcom BCM4350C5 device - Several other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01PCI/DPC: Print IRQ number used by portYicong Yang
Print IRQ number used by DPC port, like AER/PME does. It provides convenience to track DPC interrupts counts of certain port from /proc/interrupts. Link: https://lore.kernel.org/r/1589018214-52752-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01PCI/AER: Use "aer" variable for capability offsetBjorn Helgaas
Previously we used "pos" or "aer_pos" for the offset of the AER Capability. Use "aer" consistently and initialize it the same way everywhere. No functional change intended. Link: https://lore.kernel.org/r/20200529230915.GA479883@bjorn-Precision-5520 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-06-01PCI/AER: Remove redundant dev->aer_cap checksKuppuswamy Sathyanarayanan
pcie_aer_get_firmware_first() checks dev->aer_cap, so we can remove redundant dev->aer_cap checks in the callers. Link: https://lore.kernel.org/r/d5ccc7a060ec9cdc234bdae7df8a0a4410f13f42.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01PCI/AER: Remove redundant pci_is_pcie() checksKuppuswamy Sathyanarayanan
AER is a PCIe Extended Capability, so dev->aer_cap will only be set for PCIe devices. Remove redundant pci_is_pcie() checks. Link: https://lore.kernel.org/r/361c622eabe5b845b8092e0bec04a3a2c262cb38.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownershipKuppuswamy Sathyanarayanan
Commit c100beb9ccfb ("PCI/AER: Use only _OSC to determine AER ownership") removed the use of HEST in determining AER ownership, but the AER driver still used HEST to verify AER ownership in some of its APIs. Per the ACPI spec v6.3, sec 18.3.2.4, some HEST table entries contain a FIRMWARE_FIRST bit, but that bit does not tell us anything about ownership of the AER capability. Remove parsing of HEST to look for FIRMWARE_FIRST. Add pcie_aer_is_native() for the places that need to know whether the OS owns the AER capability. [bhelgaas: commit log, reorder patch, remove unused __aer_firmware_first] Link: https://lore.kernel.org/r/9a37f53a4e6ff4942ff8e18dbb20b00e16c47341.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01block: mark bio_wouldblock_error() bio with BIO_QUIETJens Axboe
We really don't care about triggering buffer errors for this condition. This avoids a spew of: Buffer I/O error on dev sdc, logical block 785929, async page read Buffer I/O error on dev sdc, logical block 759095, async page read Buffer I/O error on dev sdc, logical block 766922, async page read Buffer I/O error on dev sdc, logical block 17659, async page read Buffer I/O error on dev sdc, logical block 637571, async page read Buffer I/O error on dev sdc, logical block 39241, async page read Buffer I/O error on dev sdc, logical block 397241, async page read Buffer I/O error on dev sdc, logical block 763992, async page read from -EAGAIN conditions on request allocation for async reads. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-01KVM: selftests: fix rdtsc() for vmx_tsc_adjust_testVitaly Kuznetsov
vmx_tsc_adjust_test fails with: IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152). IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152). IA32_TSC_ADJUST is 281470681738540 (65534 * TSC_ADJUST_VALUE + 4294962476). ==== Test Assertion Failure ==== x86_64/vmx_tsc_adjust_test.c:153: false pid=19738 tid=19738 - Interrupted system call 1 0x0000000000401192: main at vmx_tsc_adjust_test.c:153 2 0x00007fe1ef8583d4: ?? ??:0 3 0x0000000000401201: _start at ??:? Failed guest assert: (adjust <= max) The problem is that is 'tsc_val' should be u64, not u32 or the reading gets truncated. Fixes: 8d7fbf01f9afc ("KVM: selftests: VMX preemption timer migration test") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200601154726.261868-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-01Documentation: fixes to the maintainer-entry-profile templateRandy Dunlap
Do some wordsmithing and copy editing on the maintainer-entry-profile profile (template, guide): - fix punctuation - fix some wording - use "-rc" consistently Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-nvdimm@lists.01.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/fbaa9b67-e7b8-d5e8-ecbb-6ae068234880@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-06-01zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rstSedat Dilek
Recently, I switched over from swap-file to zramswap. When reading the Documentation/vm/zswap.rst file I fell over this typo. The parameter is called accept_threshold_percent not accept_threhsold_percent in /sys/module/zswap/parameters/ directory. Fixes: 45190f01dd402 ("mm/zswap.c: add allocation hysteresis if pool limit is hit") Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://lore.kernel.org/r/20200601005911.31222-1-sedat.dilek@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-06-01perf libdw: Fix off-by 1 relative directory includesIan Rogers
This is currently working due to extra include paths in the build. Before: $ cd tools/perf/arch/arm64/util $ ls -la ../../util/unwind-libdw.h ls: cannot access '../../util/unwind-libdw.h': No such file or directory After: $ ls -la ../../../util/unwind-libdw.h -rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200529225232.207532-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01perf arm-spe: Support synthetic eventsTan Xiaojun
After the commit ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support") has been merged, it supports to output raw data with option "--dump-raw-trace". However, it misses for support synthetic events so cannot output any statistical info. This patch is to improve the "perf report" support for ARM SPE for four types synthetic events: First level cache synthetic events, including L1 data cache accessing and missing events; Last level cache synthetic events, including last level cache accessing and missing events; TLB synthetic events, including TLB accessing and missing events; Remote access events, which is used to account load/store operations caused to another socket. Example usage: $ perf record -c 1024 -e arm_spe_0/branch_filter=1,ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ dd if=/dev/zero of=/dev/null count=10000 $ perf report --stdio # Samples: 59 of event 'l1d-miss' # Event count (approx.): 59 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. .................................. # 23.73% 23.73% dd [kernel.kallsyms] [k] perf_iterate_ctx.constprop.135 20.34% 20.34% dd [kernel.kallsyms] [k] filemap_map_pages 5.08% 5.08% dd [kernel.kallsyms] [k] perf_event_mmap 5.08% 5.08% dd [kernel.kallsyms] [k] unlock_page_memcg 5.08% 5.08% dd [kernel.kallsyms] [k] unmap_page_range 3.39% 3.39% dd [kernel.kallsyms] [k] PageHuge 3.39% 3.39% dd [kernel.kallsyms] [k] release_pages 3.39% 3.39% dd ld-2.28.so [.] 0x0000000000008b5c 1.69% 1.69% dd [kernel.kallsyms] [k] __alloc_fd [...] # Samples: 3K of event 'l1d-access' # Event count (approx.): 3980 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ...................................... # 26.98% 26.98% dd [kernel.kallsyms] [k] ret_to_user 10.53% 10.53% dd [kernel.kallsyms] [k] fsnotify 7.51% 7.51% dd [kernel.kallsyms] [k] new_sync_read 4.57% 4.57% dd [kernel.kallsyms] [k] vfs_read 4.35% 4.35% dd [kernel.kallsyms] [k] vfs_write 3.69% 3.69% dd [kernel.kallsyms] [k] __fget_light 3.69% 3.69% dd [kernel.kallsyms] [k] rw_verify_area 3.44% 3.44% dd [kernel.kallsyms] [k] security_file_permission 2.76% 2.76% dd [kernel.kallsyms] [k] __fsnotify_parent 2.44% 2.44% dd [kernel.kallsyms] [k] ksys_write 2.24% 2.24% dd [kernel.kallsyms] [k] iov_iter_zero 2.19% 2.19% dd [kernel.kallsyms] [k] read_iter_zero 1.81% 1.81% dd dd [.] 0x0000000000002960 1.78% 1.78% dd dd [.] 0x0000000000002980 [...] # Samples: 35 of event 'llc-miss' # Event count (approx.): 35 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ........................... # 34.29% 34.29% dd [kernel.kallsyms] [k] filemap_map_pages 8.57% 8.57% dd [kernel.kallsyms] [k] unlock_page_memcg 8.57% 8.57% dd [kernel.kallsyms] [k] unmap_page_range 5.71% 5.71% dd [kernel.kallsyms] [k] PageHuge 5.71% 5.71% dd [kernel.kallsyms] [k] release_pages 5.71% 5.71% dd ld-2.28.so [.] 0x0000000000008b5c 2.86% 2.86% dd [kernel.kallsyms] [k] __queue_work 2.86% 2.86% dd [kernel.kallsyms] [k] __radix_tree_lookup 2.86% 2.86% dd [kernel.kallsyms] [k] copy_page [...] # Samples: 2 of event 'llc-access' # Event count (approx.): 2 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ............. # 50.00% 50.00% dd [kernel.kallsyms] [k] copy_page 50.00% 50.00% dd libc-2.28.so [.] _dl_addr # Samples: 48 of event 'tlb-miss' # Event count (approx.): 48 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. .................................. # 20.83% 20.83% dd [kernel.kallsyms] [k] perf_iterate_ctx.constprop.135 12.50% 12.50% dd [kernel.kallsyms] [k] __arch_clear_user 10.42% 10.42% dd [kernel.kallsyms] [k] clear_page 4.17% 4.17% dd [kernel.kallsyms] [k] copy_page 4.17% 4.17% dd [kernel.kallsyms] [k] filemap_map_pages 2.08% 2.08% dd [kernel.kallsyms] [k] __alloc_fd 2.08% 2.08% dd [kernel.kallsyms] [k] __mod_memcg_state.part.70 2.08% 2.08% dd [kernel.kallsyms] [k] __queue_work 2.08% 2.08% dd [kernel.kallsyms] [k] __rcu_read_unlock 2.08% 2.08% dd [kernel.kallsyms] [k] d_path 2.08% 2.08% dd [kernel.kallsyms] [k] destroy_inode 2.08% 2.08% dd [kernel.kallsyms] [k] do_dentry_open [...] # Samples: 9K of event 'tlb-access' # Event count (approx.): 9573 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ...................................... # 25.79% 25.79% dd [kernel.kallsyms] [k] __arch_clear_user 11.22% 11.22% dd [kernel.kallsyms] [k] ret_to_user 8.56% 8.56% dd [kernel.kallsyms] [k] fsnotify 4.06% 4.06% dd [kernel.kallsyms] [k] new_sync_read 3.67% 3.67% dd [kernel.kallsyms] [k] el0_svc_common.constprop.2 3.04% 3.04% dd [kernel.kallsyms] [k] __fsnotify_parent 2.90% 2.90% dd [kernel.kallsyms] [k] vfs_write 2.82% 2.82% dd [kernel.kallsyms] [k] vfs_read 2.52% 2.52% dd libc-2.28.so [.] write 2.26% 2.26% dd [kernel.kallsyms] [k] security_file_permission 2.08% 2.08% dd [kernel.kallsyms] [k] ksys_write 1.96% 1.96% dd [kernel.kallsyms] [k] rw_verify_area 1.95% 1.95% dd [kernel.kallsyms] [k] read_iter_zero [...] # Samples: 9 of event 'branch-miss' # Event count (approx.): 9 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ......................... # 22.22% 22.22% dd libc-2.28.so [.] _dl_addr 11.11% 11.11% dd [kernel.kallsyms] [k] __arch_clear_user 11.11% 11.11% dd [kernel.kallsyms] [k] __arch_copy_from_user 11.11% 11.11% dd [kernel.kallsyms] [k] __dentry_kill 11.11% 11.11% dd [kernel.kallsyms] [k] __efistub_memcpy 11.11% 11.11% dd ld-2.28.so [.] 0x0000000000012b7c 11.11% 11.11% dd libc-2.28.so [.] 0x000000000002a980 11.11% 11.11% dd libc-2.28.so [.] 0x0000000000083340 # Samples: 29 of event 'remote-access' # Event count (approx.): 29 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ........................... # 41.38% 41.38% dd [kernel.kallsyms] [k] filemap_map_pages 10.34% 10.34% dd [kernel.kallsyms] [k] unlock_page_memcg 10.34% 10.34% dd [kernel.kallsyms] [k] unmap_page_range 6.90% 6.90% dd [kernel.kallsyms] [k] release_pages 3.45% 3.45% dd [kernel.kallsyms] [k] PageHuge 3.45% 3.45% dd [kernel.kallsyms] [k] __queue_work 3.45% 3.45% dd [kernel.kallsyms] [k] page_add_file_rmap 3.45% 3.45% dd [kernel.kallsyms] [k] page_counter_try_charge 3.45% 3.45% dd [kernel.kallsyms] [k] page_remove_rmap 3.45% 3.45% dd [kernel.kallsyms] [k] xas_start 3.45% 3.45% dd ld-2.28.so [.] 0x0000000000002a1c 3.45% 3.45% dd ld-2.28.so [.] 0x0000000000008b5c 3.45% 3.45% dd ld-2.28.so [.] 0x00000000000093cc Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Tested-by: James Clark <james.clark@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200530122442.490-4-leo.yan@linaro.org Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01perf auxtrace: Add four itrace optionsTan Xiaojun
This patch is to add four options to synthesize events which are described as below: 'f': synthesize first level cache events 'm': synthesize last level cache events 't': synthesize TLB events 'a': synthesize remote access events This four options will be used by ARM SPE as their first consumer. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Tested-by: James Clark <james.clark@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200530122442.490-3-leo.yan@linaro.org Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01perf tools: Move arm-spe-pkt-decoder.h/c to the new dirTan Xiaojun
Create a new arm-spe-decoder directory for subsequent extensions and move arm-spe-pkt-decoder.h/c to this directory. No code changes. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Tested-by: James Clark <james.clark@arm.com> Tested-by: Qi Liu <liuqi115@hisilicon.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200530122442.490-2-leo.yan@linaro.org Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01perf test: Initialize memory in dwarf-unwindIan Rogers
Avoid a false positive caused by assembly code in arch/x86. In tests, zero the perf_event to avoid uninitialized memory uses. Warnings were caught using clang with -fsanitize=memory. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200530082015.39162-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01perf tests: Don't tail call optimize in unwind testIan Rogers
The tail call optimization can unexpectedly make the stack smaller and cause the test to fail. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: clang-built-linux@googlegroups.com Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200530082015.39162-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01tools compiler.h: Add attribute to disable tail callsIan Rogers
Tail call optimizations can remove stack frames that are used in unwinding tests. Add an attribute that can be used to disable the tail call optimization. Tested on clang and GCC. Committer notes: Old versions of clang don't like that __attribute__((optimize)), so add an ifdef to make it go away. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: clang-built-linux@googlegroups.com Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200530082015.39162-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-01Merge branches 'acpi-apei', 'acpi-pmic', 'acpi-video' and 'acpi-dptf'Rafael J. Wysocki
* acpi-apei: arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() * acpi-pmic: ACPI / PMIC: Add i2c address for thermal control * acpi-video: ACPI: video: Use native backlight on Acer TravelMate 5735Z * acpi-dptf: ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver
2020-06-01Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-dbg', 'acpi-misc' and ↵Rafael J. Wysocki
'acpi-pci' * acpi-processor: ACPI: processor: idle: Allow probing on platforms with one ACPI C-state * acpi-cppc: ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: CPPC: Make some symbols static * acpi-dbg: ACPI: debug: Make two functions static * acpi-misc: ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros * acpi-pci: ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper
2020-06-01workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()Lai Jiangshan
Any runtime WARN_ON() has to be fixed, and BUILD_BUG_ON() can help you nitice it earlier. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2020-06-01workqueue: fix a piece of comment about reserved bits for work flagsLai Jiangshan
8a2e8e5dec7e("workqueue: fix cwq->nr_active underflow") allocated one more bit from the work flags, and it updated partial of the comments (128 bytes -> 256 bytes), but it failed to update the info about the number of reserved bits. Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2020-06-01Merge branches 'acpica' and 'acpi-tables'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200430 ACPICA: Fix required parameters for _NIG and _NIH ACPICA: Dispatcher: add status checks ACPICA: Disassembler: ignore AE_ALREADY_EXISTS status when parsing create operators ACPICA: Move acpi_gbl_next_cmd_num definition to acglobal.h ACPICA: Make acpi_protocol_lengths static * acpi-tables: ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ACPI: APEI: Put the error injection table for error path and module exit ACPI: APEI: Put the boot error record table after parsing ACPI: watchdog: Put the watchdog action table after parsing ACPI: LPIT: Put the low power idle table after using it
2020-06-01Merge branches 'pm-devfreq', 'powercap', 'pm-docs' and 'pm-tools'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: Replace strncpy with strscpy PM / devfreq: imx: Register interconnect device PM / devfreq: Add generic imx bus scaling driver PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe() PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting * powercap: powercap: RAPL: remove unused local MSR define powercap/intel_rapl: add support for ElkhartLake * pm-docs: Documentation: admin-guide: pm: Document intel-speed-select * pm-tools: cpupower: Remove unneeded semicolon
2020-06-01Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Fix up cpufreq_boost_set_sw() cpufreq: fix minor typo in struct cpufreq_driver doc comment cpufreq: qoriq: Add platform dependencies clk: qoriq: add cpufreq platform device cpufreq: qoriq: convert to a platform driver cpufreq: qcom: fix wrong compatible binding cpufreq: imx-cpufreq-dt: support i.MX7ULP cpufreq: dt: Add support for r8a7742 cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS cpufreq: intel_pstate: Use passive mode by default without HWP
2020-06-01Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: Fix three reference count leaks cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver Documentation: ABI: make current_governer_ro as a candidate for removal Documentation: cpuidle: update the document cpuidle: sysfs: Remove sysfs_switch and switch attributes cpuidle: Make cpuidle governor switchable to be the default behaviour cpuidle: sysfs: Accept governor name with 15 characters cpuidle: sysfs: Fix the overlap for showing available governors cpuidle: psci: Fixup execution order when entering a domain idle state cpuidle: sysfs: Minor coding style corrections cpuidle: sysfs: Remove the unused define_one_r(o/w) macros
2020-06-01Merge branches 'pm-core' and 'pm-sleep'Rafael J. Wysocki
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling
2020-06-01kbuild: merge net-y and virt-y into drivers-yMasahiro Yamada
This will slightly change the link order; drivers-y from arch Makefile will be linked after virt/built-in.a, but I guess this is not a big deal. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-01kbuild: merge init-y into core-yMasahiro Yamada
No arch Makefile specifies init-y. Merge init-y into core-y. This does not change the link order. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-01kbuild: refactor tagets caluculation for KBUILD_{BUILTIN,KBUILD_MODULES}Masahiro Yamada
Remove lib-target, builtin-target, modorder-target, and modtargets. Instead, add targets-for-builtin and targets-for-modules. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-01kbuild: refactor subdir-ym calculationMasahiro Yamada
Remove the unneeded variables, __subdir-y and __subdir-m. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-01kbuild: merge two 'ifdef CONFIG_TRIM_UNUSED_KSYMS' blocksMasahiro Yamada
This hunk has two 'ifdef CONFIG_TRIM_UNUSED_KSYMS ... endif' blocks with no other code interleaved. Merge them. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-01kbuild: force to build vmlinux if CONFIG_MODVERSION=yMasahiro Yamada
This code does not work as stated in the comment. $(CONFIG_MODVERSIONS) is always empty because it is expanded before include/config/auto.conf is included. Hence, 'make modules' with CONFIG_MODVERSION=y cannot record the version CRCs. This has been broken since 2003, commit ("kbuild: Enable modules to be build using the "make dir/" syntax"). [1] [1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=15c6240cdc44bbeef3c4797ec860f9765ef4f1a7 Cc: linux-stable <stable@vger.kernel.org> # v2.5.71+ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 06:05:46 +0000