summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-15locks: allow __break_lease to sleep even when break_time is 0Jeff Layton
A fl->fl_break_time of 0 has a special meaning to the lease break code that basically means "never break the lease". knfsd uses this to ensure that leases don't disappear out from under it. Unfortunately, the code in __break_lease can end up passing this value to wait_event_interruptible as a timeout, which prevents it from going to sleep at all. This makes __break_lease to spin in a tight loop and causes soft lockups. Fix this by ensuring that we pass a minimum value of 1 as a timeout instead. Cc: <stable@vger.kernel.org> Cc: J. Bruce Fields <bfields@fieldses.org> Reported-by: Terry Barnaby <terry1@beam.ltd.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-15video: bf54x-lq043fb: fix build errorSteven Miao
Fix build error by including linux/gpio.h. Also drop asm/gpio.h which is not needed. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-15ARM: rockchip: fix copy'n'paste error in smp error messagesHeiko Stuebner
The error emitted when mapping the pmu failed, wrongly mentions the sram. Reported-by: Kent Borg <kentborg@borg.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-04-15ARM: rockchip: rk3188: enable pull-ups on UART RX pinsMax Schwarz
The default behaviour of the uart-rx pins on the rk3188 is to be pulled up and a lot of designs use diodes to even prevent them from being raised from the outside. Therefore change the rx-pin settings accordingly. This also fixes a uart receive problem on mass production Radxa Rock boards. Signed-off-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-04-14iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptorsJiang Liu
Commit "59ce0515cdaf iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens" introduces a bug, which fails to match PCI devices with DMAR device scope entries if PCI path array in the entry has more than one level. For example, it fails to handle [1D2h 0466 1] Device Scope Entry Type : 01 [1D3h 0467 1] Entry Length : 0A [1D4h 0468 2] Reserved : 0000 [1D6h 0470 1] Enumeration ID : 00 [1D7h 0471 1] PCI Bus Number : 00 [1D8h 0472 2] PCI Path : 1C,04 [1DAh 0474 2] PCI Path : 00,02 And cause DMA failure on HP DL980 as: DMAR:[fault reason 02] Present bit in context entry is clear dmar: DRHD: handling fault status reg 602 dmar: DMAR:[DMA Read] Request device [02:00.2] fault addr 7f61e000 Reported-and-tested-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-04-14iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridgesDavid Woodhouse
Commit 146922ec79 ("iommu/vt-d: Make get_domain_for_dev() take struct device") introduced new variables bridge_bus and bridge_devfn to identify the upstream PCIe to PCI bridge responsible for the given target device. Leaving the original bus/devfn variables to identify the target device itself, now that it is no longer assumed to be PCI and we can no longer trivially find that information. However, the patch failed to correctly use the new variables in all cases; instead using the as-yet-uninitialised 'bus' and 'devfn' variables. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-04-15driver/net: cosa driver uses udelay incorrectlyLi, Zhen-Hua
In cosa driver, udelay with more than 20000 may cause __bad_udelay. Use msleep for instead. Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15at86rf230: fix __at86rf230_read_subreg functionAlexander Aring
The __at86rf230_read_subreg function don't mask and shift register contents which it should do. This patch adds the necessary masks and shift operations in this function. Since we have csma support this can make some trouble on state changes. Since CSMA support turned on some bits in the TRX_STATUS register that used to be zero, not masking broke checking of the TRX_STATUS field after commanding a state change. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15at86rf230: remove check if AVDD settledAlexander Aring
The AVDD regulator is only enabled when the RF section is active TX_ON (PLL_ON) state. Since commit 7dcbd22a97eb0689e6c583ad630ae0e7341e34c1 ("ieee802154: ensure that first RF212 state comes from TRX_OFF"). We are in TRX_OFF state at the time at86rf230_hw_init is run. Note that this test would only fail in case of a severe hardware malfunction (faulty/shorted power supply, etc.) so it wasn't all that useful in the first place. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15net: cadence: Add architecture dependenciesJean Delvare
The Cadence ethernet chipsets are only used on specific ARM architectures. Add Kconfig dependencies so that drivers for these chipsets are only buildable on the relevant architectures. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGETheodore Ts'o
In retrospect, this was a bad way to handle things, since it limited testing of these patches. We should just get the VFS level changes merged in first. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-14ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabledAzat Khuzhin
With bigalloc enabled we must use EXT4_CLUSTERS_PER_GROUP() instead of EXT4_BLOCKS_PER_GROUP() otherwise we will go beyond the allocated buffer. $ mount -t ext4 /dev/vde /vde [ 70.573993] EXT4-fs DEBUG (fs/ext4/mballoc.c, 2346): ext4_mb_alloc_groupinfo: [ 70.575174] allocated s_groupinfo array for 1 meta_bg's [ 70.576172] EXT4-fs DEBUG (fs/ext4/super.c, 2092): ext4_check_descriptors: [ 70.576972] Checking group descriptorsBUG: unable to handle kernel paging request at ffff88006ab56000 [ 72.463686] IP: [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f [ 72.464168] PGD 295e067 PUD 2961067 PMD 7fa8e067 PTE 800000006ab56060 [ 72.464738] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 72.465139] Modules linked in: [ 72.465402] CPU: 1 PID: 3560 Comm: mount Tainted: G W 3.14.0-rc2-00069-ge57bce1 #60 [ 72.466079] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 72.466505] task: ffff88007ce6c8a0 ti: ffff88006b7f0000 task.ti: ffff88006b7f0000 [ 72.466505] RIP: 0010:[<ffffffff81394eb9>] [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f [ 72.466505] RSP: 0018:ffff88006b7f1c00 EFLAGS: 00010206 [ 72.466505] RAX: 0000000000000000 RBX: 000000000000050a RCX: 0000000000000040 [ 72.466505] RDX: 0000000000000000 RSI: 0000000000080000 RDI: 0000000000000000 [ 72.466505] RBP: ffff88006b7f1c28 R08: 0000000000000002 R09: 0000000000000000 [ 72.466505] R10: 000000000000babe R11: 0000000000000400 R12: 0000000000080000 [ 72.466505] R13: 0000000000000200 R14: 0000000000002000 R15: ffff88006ab55000 [ 72.466505] FS: 00007f43ba1fa840(0000) GS:ffff88007f800000(0000) knlGS:0000000000000000 [ 72.466505] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 72.466505] CR2: ffff88006ab56000 CR3: 000000006b7e6000 CR4: 00000000000006e0 [ 72.466505] Stack: [ 72.466505] ffff88006ab65000 0000000000000000 0000000000000000 0000000000010000 [ 72.466505] ffff88006ab6f400 ffff88006b7f1c58 ffffffff81396bb8 0000000000010000 [ 72.466505] 0000000000000000 ffff88007b869a90 ffff88006a48a000 ffff88006b7f1c70 [ 72.466505] Call Trace: [ 72.466505] [<ffffffff81396bb8>] memweight+0x5f/0x8a [ 72.466505] [<ffffffff811c3b19>] ext4_count_free+0x13/0x21 [ 72.466505] [<ffffffff811c396c>] ext4_count_free_clusters+0xdb/0x171 [ 72.466505] [<ffffffff811e3bdd>] ext4_fill_super+0x117c/0x28ef [ 72.466505] [<ffffffff81391569>] ? vsnprintf+0x1c7/0x3f7 [ 72.466505] [<ffffffff8114d8dc>] mount_bdev+0x145/0x19c [ 72.466505] [<ffffffff811e2a61>] ? ext4_calculate_overhead+0x2a1/0x2a1 [ 72.466505] [<ffffffff811dab1d>] ext4_mount+0x15/0x17 [ 72.466505] [<ffffffff8114e3aa>] mount_fs+0x67/0x150 [ 72.466505] [<ffffffff811637ea>] vfs_kern_mount+0x64/0xde [ 72.466505] [<ffffffff81165d19>] do_mount+0x6fe/0x7f5 [ 72.466505] [<ffffffff81126cc8>] ? strndup_user+0x3a/0xd9 [ 72.466505] [<ffffffff8116604b>] SyS_mount+0x85/0xbe [ 72.466505] [<ffffffff81619e90>] tracesys+0xdd/0xe2 [ 72.466505] Code: c3 89 f0 b9 40 00 00 00 55 99 48 89 e5 41 57 f7 f9 41 56 49 89 ff 41 55 45 31 ed 41 54 41 89 f4 53 31 db 41 89 c6 45 39 ee 7e 10 <4b> 8b 3c ef 49 ff c5 e8 bf ff ff ff 01 c3 eb eb 31 c0 45 85 f6 [ 72.466505] RIP [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f [ 72.466505] RSP <ffff88006b7f1c00> [ 72.466505] CR2: ffff88006ab56000 [ 72.466505] ---[ end trace 7d051a08ae138573 ]--- Killed Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-15ARM: i.MX6: ipu_di_sel clocks can set parent ratesPhilipp Zabel
To obtain exact pixel clocks, allow the DI clock selectors to influence the PLLs that they are derived from. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-15ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_selSascha Hauer
Route the video PLL to the display interface clocks via the di_pre_sel and di_sel muxes by default. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Marcelo Tosatti: - Fix for guest triggerable BUG_ON (CVE-2014-0155) - CR4.SMAP support - Spurious WARN_ON() fix * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove WARN_ON from get_kernel_ns() KVM: Rename variable smep to cr4_smep KVM: expose SMAP feature to guest KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode KVM: Add SMAP support when setting CR4 KVM: Remove SMAP bit from CR4_RESERVED_BITS KVM: ioapic: try to recover if pending_eoi goes out of range KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
2014-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull bmc2835 crypto fix from Herbert Xu: "This fixes a potential boot crash on bcm2835 due to the recent change that now causes hardware RNGs to be accessed on registration" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: bcm2835 - fix oops when rng h/w is accessed during registration
2014-04-14user namespace: fix incorrect memory barriersMikulas Patocka
smp_read_barrier_depends() can be used if there is data dependency between the readers - i.e. if the read operation after the barrier uses address that was obtained from the read operation before the barrier. In this file, there is only control dependency, no data dependecy, so the use of smp_read_barrier_depends() is incorrect. The code could fail in the following way: * the cpu predicts that idx < entries is true and starts executing the body of the for loop * the cpu fetches map->extent[0].first and map->extent[0].count * the cpu fetches map->nr_extents * the cpu verifies that idx < extents is true, so it commits the instructions in the body of the for loop The problem is that in this scenario, the cpu read map->extent[0].first and map->nr_extents in the wrong order. We need a full read memory barrier to prevent it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains three Netfilter fixes for your net tree, they are: * Fix missing generation sequence initialization which results in a splat if lockdep is enabled, it was introduced in the recent works to improve nf_conntrack scalability, from Andrey Vagin. * Don't flush the GRE keymap list in nf_conntrack when the pptp helper is disabled otherwise this crashes due to a double release, from Andrey Vagin. * Fix nf_tables cmp fast in big endian, from Patrick McHardy. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14net: Start with correct mac_len in skb_network_protocolVlad Yasevich
Sometimes, when the packet arrives at skb_mac_gso_segment() its skb->mac_len already accounts for some of the mac lenght headers in the packet. This seems to happen when forwarding through and OpenSSL tunnel. When we start looking for any vlan headers in skb_network_protocol() we seem to ignore any of the already known mac headers and start with an ETH_HLEN. This results in an incorrect offset, dropped TSO frames and general slowness of the connection. We can start counting from the known skb->mac_len and return at least that much if all mac level headers are known and accounted for. Fixes: 53d6471cef17262d3ad1c7ce8982a234244f68ec (net: Account for all vlan headers in skb_mac_gso_segment) CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Daniel Borkman <dborkman@redhat.com> Tested-by: Martin Filip <nexus+kernel@smoula.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfcMagnus Damm
Fix typo of renesas,groups in the koeslch dt. The kernel has no renesas,gpios but this should match renesas,groups. Noticed thanks to similar fix for Lager by Rob Taylor and Ben Dooks. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-15ARM: shmobile: r8a7740: drop address cells from GIC nodeLucas Stach
This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-15ARM: shmobile: sh73a0: drop address cells from GIC nodeLucas Stach
This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversalMike Qiu
3bc955987fb3 ("powerpc/PCI: Use list_for_each_entry() for bus traversal") caused a NULL pointer dereference because the loop body set the iterator to NULL: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000041d78 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000041d78] .sys_pciconfig_iobase+0x68/0x1f0 LR [c000000000041e0c] .sys_pciconfig_iobase+0xfc/0x1f0 Call Trace: [c0000003b4787db0] [c000000000041e0c] .sys_pciconfig_iobase+0xfc/0x1f0 (unreliable) [c0000003b4787e30] [c000000000009ed8] syscall_exit+0x0/0x98 Fix it by using a temporary variable for the iterator. [bhelgaas: changelog, drop tmp_bus initialization] Fixes: 3bc955987fb3 powerpc/PCI: Use list_for_each_entry() for bus traversal Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-14ARM: 8026/1: Fix emulation of multiply accumulate instructionsJay Foad
The emulation for single and double precision multiply accumulate instructions correctly normalised any denormal values in the operand registers, but failed to normalise the destination (accumulator) register. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70501 Signed-off-by: Jay Foad <jay.foad@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-14ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sortedAlexander Shiyan
This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-14regulator: pbias: Convert to use regmap helper functionsAxel Lin
This patch converts this driver to use the regmap helper functions provided by regulator core. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14regulator: pbias: Fix is_enabled callback implementationAxel Lin
The is_enabled implementation is wrong in some cases: e.g. for pbias_mmc_omap5: enable_mask is : BIT(27) | BIT(25) | BIT(26) However, pbias_regulator_enable() only sets BIT(27) | BIT(26) bits. So is_enabled callback will always return false in this case. Fix the logic to compare the register value with info->enable rather than info->enable_mask. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14KVM: x86: remove WARN_ON from get_kernel_ns()Marcelo Tosatti
Function and callers can be preempted. https://bugzilla.kernel.org/show_bug.cgi?id=73721 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-14KVM: Rename variable smep to cr4_smepFeng Wu
Rename variable smep to cr4_smep, which can better reflect the meaning of the variable. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: expose SMAP feature to guestFeng Wu
This patch exposes SMAP feature to guest Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Disable SMAP for guests in EPT realmode and EPT unpaging modeFeng Wu
SMAP is disabled if CPU is in non-paging mode in hardware. However KVM always uses paging mode to emulate guest non-paging mode with TDP. To emulate this behavior, SMAP needs to be manually disabled when guest switches to non-paging mode. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Add SMAP support when setting CR4Feng Wu
This patch adds SMAP handling logic when setting CR4 for guests Thanks a lot to Paolo Bonzini for his suggestion to use the branchless way to detect SMAP violation. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Remove SMAP bit from CR4_RESERVED_BITSFeng Wu
This patch removes SMAP bit from CR4_RESERVED_BITS. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the ↵Daniel Borkmann
receiver's buffer" This reverts commit ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") as it introduced a serious performance regression on SCTP over IPv4 and IPv6, though a not as dramatic on the latter. Measurements are on 10Gbit/s with ixgbe NICs. Current state: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.241.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 17:56:21 GMT Connecting to host 192.168.241.3, port 5201 Cookie: Lab200slot2.1397238981.812898.548918 [ 4] local 192.168.241.2 port 38616 connected to 192.168.241.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.09 sec 20.8 MBytes 161 Mbits/sec [ 4] 1.09-2.13 sec 10.8 MBytes 86.8 Mbits/sec [ 4] 2.13-3.15 sec 3.57 MBytes 29.5 Mbits/sec [ 4] 3.15-4.16 sec 4.33 MBytes 35.7 Mbits/sec [ 4] 4.16-6.21 sec 10.4 MBytes 42.7 Mbits/sec [ 4] 6.21-6.21 sec 0.00 Bytes 0.00 bits/sec [ 4] 6.21-7.35 sec 34.6 MBytes 253 Mbits/sec [ 4] 7.35-11.45 sec 22.0 MBytes 45.0 Mbits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-12.51 sec 16.0 MBytes 126 Mbits/sec [ 4] 12.51-13.59 sec 20.3 MBytes 158 Mbits/sec [ 4] 13.59-14.65 sec 13.4 MBytes 107 Mbits/sec [ 4] 14.65-16.79 sec 33.3 MBytes 130 Mbits/sec [ 4] 16.79-16.79 sec 0.00 Bytes 0.00 bits/sec [ 4] 16.79-17.82 sec 5.94 MBytes 48.7 Mbits/sec (etc) [root@Lab200slot2 ~]# iperf3 --sctp -6 -c 2001:db8:0:f101::1 -V -l 1400 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 19:08:41 GMT Connecting to host 2001:db8:0:f101::1, port 5201 Cookie: Lab200slot2.1397243321.714295.2b3f7c [ 4] local 2001:db8:0:f101::2 port 55804 connected to 2001:db8:0:f101::1 port 5201 Starting Test: protocol: SCTP, 1 streams, 1400 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 169 MBytes 1.42 Gbits/sec [ 4] 1.00-2.00 sec 201 MBytes 1.69 Gbits/sec [ 4] 2.00-3.00 sec 188 MBytes 1.58 Gbits/sec [ 4] 3.00-4.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 4.00-5.00 sec 165 MBytes 1.39 Gbits/sec [ 4] 5.00-6.00 sec 199 MBytes 1.67 Gbits/sec [ 4] 6.00-7.00 sec 163 MBytes 1.36 Gbits/sec [ 4] 7.00-8.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 8.00-9.00 sec 193 MBytes 1.62 Gbits/sec [ 4] 9.00-10.00 sec 196 MBytes 1.65 Gbits/sec [ 4] 10.00-11.00 sec 157 MBytes 1.31 Gbits/sec [ 4] 11.00-12.00 sec 175 MBytes 1.47 Gbits/sec [ 4] 12.00-13.00 sec 192 MBytes 1.61 Gbits/sec [ 4] 13.00-14.00 sec 199 MBytes 1.67 Gbits/sec (etc) After patch: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.240.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0+ #1 SMP Mon Apr 14 12:06:40 EDT 2014 x86_64 Time: Mon, 14 Apr 2014 16:40:48 GMT Connecting to host 192.168.240.3, port 5201 Cookie: Lab200slot2.1397493648.413274.65e131 [ 4] local 192.168.240.2 port 50548 connected to 192.168.240.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 1.00-2.00 sec 239 MBytes 2.01 Gbits/sec [ 4] 2.00-3.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 3.00-4.00 sec 239 MBytes 2.00 Gbits/sec [ 4] 4.00-5.00 sec 245 MBytes 2.05 Gbits/sec [ 4] 5.00-6.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 6.00-7.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 7.00-8.00 sec 239 MBytes 2.01 Gbits/sec With the reverted patch applied, the SCTP/IPv4 performance is back to normal on latest upstream for IPv4 and IPv6 and has same throughput as 3.4.2 test kernel, steady and interval reports are smooth again. Fixes: ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") Reported-by: Peter Butler <pbutler@sonusnet.com> Reported-by: Dongsheng Song <dongsheng.song@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Peter Butler <pbutler@sonusnet.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Cc: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14cxgb4: Save the correct mac addr for hw-loopback connections in the L2TSteve Wise
Hardware needs the local device mac address to support hw loopback for rdma loopback connections. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_WDaniel Borkmann
While reviewing seccomp code, we found that BPF_S_ANC_SECCOMP_LD_W has been wrongly decoded by commit a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") into the opcode BPF_LD|BPF_B|BPF_ABS although it should have been decoded as BPF_LD|BPF_W|BPF_ABS. In practice, this should not have much side-effect though, as such conversion is/was being done through prctl(2) PR_SET_SECCOMP. Reverse operation PR_GET_SECCOMP will only return the current seccomp mode, but not the filter itself. Since the transition to the new BPF infrastructure, it's also not used anymore, so we can simply remove this as it's unreachable. Fixes: a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPFDaniel Borkmann
Linus reports that on 32-bit x86 Chromium throws the following seccomp resp. audit log messages: audit: type=1326 audit(1397359304.356:28108): auid=500 uid=500 gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023 pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=172 compat=0 ip=0xb2dd9852 code=0x30000 audit: type=1326 audit(1397359304.356:28109): auid=500 uid=500 gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023 pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=5 compat=0 ip=0xb2dd9852 code=0x50000 These audit messages are being triggered via audit_seccomp() through __secure_computing() in seccomp mode (BPF) filter with seccomp return codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO) during filter runtime. Moreover, Linus reports that x86_64 Chromium seems fine. The underlying issue that explains this is that the implementation of populate_seccomp_data() is wrong. Our seccomp data structure sd that is being shared with user ABI is: struct seccomp_data { int nr; __u32 arch; __u64 instruction_pointer; __u64 args[6]; }; Therefore, a simple cast to 'unsigned long *' for storing the value of the syscall argument via syscall_get_arguments() is just wrong as on 32-bit x86 (or any other 32bit arch), it would result in storing a0-a5 at wrong offsets in args[] member, and thus i) could leak stack memory to user space and ii) tampers with the logic of seccomp BPF programs that read out and check for syscall arguments: syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]); Tested on 32-bit x86 with Google Chrome, unfortunately only via remote test machine through slow ssh X forwarding, but it fixes the issue on my side. So fix it up by storing args in type correct variables, gcc is clever and optimizes the copy away in other cases, e.g. x86_64. Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set") Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14spi: sh-hspi: Do not specifically request shyway_clk clockSimon Horman
Rather than requesting the shyway_clk call clk_get with the device and a NULL con_id. This is in keeping with the way that clk_get() is called on other drivers used by Renesas Gen 1 SoCs. And I believe it is compatible with supplying clocks via DT, unlike the current code. It appears to me that the two uses of this driver are the r8a7778 and r8a7779 SoCs. The r8a7779 already has clocks setup to allow this driver to continue to work with this change applied. The r8a7778 has clocks incorrectly setup to allow this driver to continue to work with this change applied. This problem is addressed in "ARM: shmobile: r8a7778: Use clks as MSTP007 parent" which is thus a pre-requisite of this patch. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14ARM: shmobile: r8a7778: Use clks as MSTP007 parentSimon Horman
According to the documentation the parent clock of MSTP007 should be clks not clkp. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: sirf: make GPIO chipselect function work wellQipan Li
orignal GPIO chipslect is not standard because it don't take care to the chipselect signal: BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: sirf: set SPI controller in RISC IO chipselect modeQipan Li
SPI bitbang supply "chipselect" interface for change chip-select line , in the SiRFSoC SPI controller, we need to enable "SPI_CS_IO_MODE", otherwise, spi_sirfsoc_chipselect() has no effect. now the driver is working is because SPI controller will control CS automatically without SPI_CS_IO_MODE. this patch makes the CS controller really controlled by software. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: sirf: correct TXFIFO empty interrupt status bitQipan Li
the old code uses wrong marco - SIRFSOC_SPI_FIFO_FULL is not for FIFO interrupt status, it is for FIFO status. here in the ISR, SIRFSOC_SPI_TXFIFO_EMPTY is the right bit for SPI TXFIFO interrupt status. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: bfin5xx: fix build errorSteven Miao
should include linux/gpio.h Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14wl18xx: align event mailbox with current fwEliad Peller
Some fields are missing from the event mailbox struct definitions, which cause issues when trying to handle some events. Add the missing fields in order to align the struct size (without adding actual support for the new fields). Reported-and-tested-by: Imre Kaloz <kaloz@openwrt.org> Cc: stable@vger.kernel.org # 3.14+ Fixes: 028e724 ("wl18xx: move to new firmware (wl18xx-fw-3.bin)") Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14rsi: Fix a potential memory leak in rsi_send_auto_rate_request()Christian Engelmayer
Fix a potential memory leak in the error path of function rsi_send_auto_rate_request(). In case memory allocation for array 'selected_rates' fails, the error path exits and leaves the previously allocated skb in place. Detected by Coverity: CID 1195575. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14cw1200: Fix cw1200_debug_link_idFrederic Danis
This array is used in debug string to display cw1200_link_status defined in drivers/net/wireless/cw1200/cw1200.h. Add missing strings for CW1200_LINK_RESET and CW1200_LINK_RESET_REMAP. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14wlcore: ignore dummy packet events in PLT modeLuciano Coelho
Sometimes the firmware sends a dummy packet event while we are in PLT mode. This doesn't make sense, it's a firmware bug. Fix this by ignoring dummy packet events when we're PLT mode. Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14rsi: Fix a potential memory leak in rsi_set_channel()Christian Engelmayer
Fix a potential memory leak in function rsi_set_channel() that is used to program channel changes. The channel check block for the frequency bands directly exits the function in case of an error, thus leaving an already allocated skb unreferenced. Move the checks above allocating the skb. Detected by Coverity: CID 1195576. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14rsi: Add missing initialization of iiGeert Uytterhoeven
drivers/net/wireless/rsi/rsi_91x_core.c: In function ‘rsi_core_determine_hal_queue’: drivers/net/wireless/rsi/rsi_91x_core.c:91: warning: ‘ii’ may be used uninitialized in this function Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-14btrfs: fix use-after-free in mount_subvol()Christoph Jaeger
Pointer 'newargs' is used after the memory that it points to has already been freed. Picked up by Coverity - CID 1201425. Fixes: 0723a0473f ("btrfs: allow mounting btrfs subvolumes with different ro/rw options") Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Chris Mason <clm@fb.com>
generated by cgit (git 2.34.1) at 2025-09-14 16:59:48 +0000