| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of miscellaneous ext4 bug fixes and cleanups this cycle, most
notably in the journaling code, bufered I/O, and compiler warning
cleanups"
* tag 'ext4_for_linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
jbd2: Fix comment describing journal_init_common()
ext4: prevent an infinite loop in the lazyinit thread
ext4: use struct_size() to improve ext4_htree_store_dirent()
ext4: annotate struct fname with __counted_by()
jbd2: avoid dozens of -Wflex-array-member-not-at-end warnings
ext4: use str_yes_no() helper function
ext4: prevent delalloc to nodelalloc on remount
jbd2: make b_frozen_data allocation always succeed
ext4: cleanup variable name in ext4_fc_del()
ext4: use string choices helpers
jbd2: remove the 'success' parameter from the jbd2_do_replay() function
jbd2: remove useless 'block_error' variable
jbd2: factor out jbd2_do_replay()
jbd2: refactor JBD2_COMMIT_BLOCK process in do_one_pass()
jbd2: unified release of buffer_head in do_one_pass()
jbd2: remove redundant judgments for check v1 checksum
ext4: use ERR_CAST to return an error-valued pointer
mm: zero range of eof folio exposed by inode size extension
ext4: partial zero eof block on unaligned inode size extension
ext4: disambiguate the return value of ext4_dio_write_end_io()
...
|
|
"micrel,led-mode" is not yet documented by a schema. It's irrelevant to
the example, so just drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241113225742.1784723-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull statx updates from Al Viro:
"Sanitize struct filename and lookup flags handling in statx and
friends"
* tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: kill empty_dir_getattr()
fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag
fs/stat.c: switch to CLASS(fd_raw)
kill getname_statx_lookup_flags()
io_statx_prep(): use getname_uflags()
|
|
When building the rust_print sample with CONFIG_JUMP_LABEL=n, the Rust
static key support falls back to using static_key_count. This function
accepts a mutable pointer to the `struct static_key`, but the Rust
abstractions are incorrectly passing a const pointer.
This means that builds using CONFIG_JUMP_LABEL=n and SAMPLE_RUST_PRINT=y
fail with the following error message:
error[E0308]: mismatched types
--> <root>/samples/rust/rust_print_main.rs:87:5
|
87 | / kernel::declare_trace! {
88 | | /// # Safety
89 | | ///
90 | | /// Always safe to call.
91 | | unsafe fn rust_sample_loaded(magic: c_int);
92 | | }
| | ^
| | |
| |_____types differ in mutability
| arguments to this function are incorrect
|
= note: expected raw pointer `*mut kernel::bindings::static_key`
found raw pointer `*const kernel::bindings::static_key`
note: function defined here
--> <root>/rust/bindings/bindings_helpers_generated.rs:33:12
|
33 | pub fn static_key_count(key: *mut static_key) -> c_int;
| ^^^^^^^^^^^^^^^^
To fix this, insert a pointer cast so that the pointer is mutable.
Link: https://lore.kernel.org/20241118202727.73646-1-aliceryhl@google.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411181440.qEdcuyh6-lkp@intel.com/
Fixes: 169484ab6677 ("rust: add arch_static_branch")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
- improvement of the way hid-bpf coexists with specific drivers (others than
hid-generic) that are already bound to devices (Benjamin Tissoires)
|
|
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang)
|
|
- assorted cleanups and small code fixes (Dmitry Torokhov, Yan Zhen,
Nathan Chancellor, Andy Shevchenko)
|
|
- support for Corsair Void headset family (Stuart Hayhurst)
|
|
Pull ufs updates from Al Viro:
"ufs cleanups, fixes and folio conversion"
* tag 'pull-ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: ufs_sb_private_info: remove unused s_{2,3}apb fields
ufs: Convert ufs_change_blocknr() to take a folio
ufs: Pass a folio to ufs_new_fragments()
ufs: Convert ufs_inode_getfrag() to take a folio
ufs: Convert ufs_extend_tail() to take a folio
ufs: Convert ufs_inode_getblock() to take a folio
ufs: take the handling of free block counters into a helper
clean ufs_trunc_direct() up a bit...
ufs: get rid of ubh_{ubhcpymem,memcpyubh}()
ufs_inode_getfrag(): remove junk comment
ufs_free_fragments(): fix the braino in sanity check
ufs_clusteracct(): switch to passing fragment number
ufs: untangle ubh_...block...(), part 3
ufs: untangle ubh_...block...(), part 2
ufs: untangle ubh_...block...() macros, part 1
ufs: fix ufs_read_cylinder() failure handling
ufs: missing ->splice_write()
ufs: fix handling of delete_entry and set_link failures
|
|
- Support for Goodix GT7986U SPI (Charles Wang)
- assorted code cleanups and fixes (Charles Wang)
|
|
- code cleanup (Uwe Kleine-König)
|
|
- exposing firmware versions for Intel-ISH devices that load
firmware from the host (Zhang Lixu)
- switch to flex-array members (Erick Archer)
|
|
- initial vendor-specific driver for Kysona, currently adding support for
Kysona M600 (Lode Willems)
|
|
- unused variable removal in hidpp_root_get_feature() (Bastien Nocera)
|
|
- code cleanup for mt_set_mode() (Dmitry Torokhov)
|
|
mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Pull xattr updates from Al Viro:
"Sanitize xattr and io_uring interactions with it, add *xattrat()
syscalls, sanitize struct filename handling in there"
* tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr: remove redundant check on variable err
fs/xattr: add *at family syscalls
new helpers: file_removexattr(), filename_removexattr()
new helpers: file_listxattr(), filename_listxattr()
replace do_getxattr() with saner helpers.
replace do_setxattr() with saner helpers.
new helper: import_xattr_name()
fs: rename struct xattr_ctx to kernel_xattr_ctx
xattr: switch to CLASS(fd)
io_[gs]etxattr_prep(): just use getname()
io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE
getname_maybe_null() - the third variant of pathname copy-in
teach filename_lookup() to treat NULL filename as ""
|
|
- bugfixes for Steelseries Arctis 1 battery level handling (Bastien Nocera)
|
|
- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)
|
|
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
|
The issue that unrelated function name is shown on stack trace like
following even though it should be trampoline code address is caused by
the creation of trampoline code in the area where .init.text section
of module was freed after module is loaded.
bash-1344 [002] ..... 43.644608: <stack trace>
=> (MODULE INIT FUNCTION)
=> vfs_write
=> ksys_write
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
To resolve this, when function address of stack trace entry is in
trampoline, output without looking up symbol name.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241021071454.34610-2-tatsuya.s2862@gmail.com
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ecryptfs updates from Christian Brauner:
"The folio project is about to remove page->index. This contains the
work required for ecryptfs"
* tag 'vfs-6.13.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ecryptfs: Pass the folio index to crypt_extent()
ecryptfs: Convert lower_offset_for_page() to take a folio
ecryptfs: Convert ecryptfs_decrypt_page() to take a folio
ecryptfs: Convert ecryptfs_encrypt_page() to take a folio
ecryptfs: Convert ecryptfs_write_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_write() to use a folio
ecryptfs: Convert ecryptfs_read_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_copy_up_encrypted_with_header() to take a folio
ecryptfs: Use a folio throughout ecryptfs_read_folio()
ecryptfs: Convert ecryptfs_writepage() to ecryptfs_writepages()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs untorn write support from Christian Brauner:
"An atomic write is a write issed with torn-write protection. This
means for a power failure or any hardware failure all or none of the
data from the write will be stored, never a mix of old and new data.
This work is already supported for block devices. If a block device is
opened with O_DIRECT and the block device supports atomic write, then
FMODE_CAN_ATOMIC_WRITE is added to the file of the opened block
device.
This contains the work to expand atomic write support to filesystems,
specifically ext4 and XFS. Currently, only support for writing exactly
one filesystem block atomically is added.
Since it's now possible to have filesystem block size > page size for
XFS, it's possible to write 4K+ blocks atomically on x86"
* tag 'vfs-6.13.untorn.writes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: drop an obsolete comment in iomap_dio_bio_iter
ext4: Do not fallback to buffered-io for DIO atomic write
ext4: Support setting FMODE_CAN_ATOMIC_WRITE
ext4: Check for atomic writes support in write iter
ext4: Add statx support for atomic writes
xfs: Support setting FMODE_CAN_ATOMIC_WRITE
xfs: Validate atomic writes
xfs: Support atomic write for statx
fs: iomap: Atomic write support
fs: Export generic_atomic_write_valid()
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull tmpfs case folding updates from Christian Brauner:
"This adds case-insensitive support for tmpfs.
The work contained in here adds support for case-insensitive file
names lookups in tmpfs. The main difference from other casefold
filesystems is that tmpfs has no information on disk, just on RAM, so
we can't use mkfs to create a case-insensitive tmpfs. For this
implementation, there's a mount option for casefolding. The rest of
the patchset follows a similar approach as ext4 and f2fs.
The use case for this feature is similar to the use case for ext4, to
better support compatibility layers (like Wine), particularly in
combination with sandboxing/container tools (like Flatpak).
Those containerization tools can share a subset of the host filesystem
with an application. In the container, the root directory and any
parent directories required for a shared directory are on tmpfs, with
the shared directories bind-mounted into the container's view of the
filesystem.
If the host filesystem is using case-insensitive directories, then the
application can do lookups inside those directories in a
case-insensitive way, without this needing to be implemented in
user-space. However, if the host is only sharing a subset of a
case-insensitive directory with the application, then the parent
directories of the mount point will be part of the container's root
tmpfs. When the application tries to do case-insensitive lookups of
those parent directories on a case-sensitive tmpfs, the lookup will
fail"
* tag 'vfs-6.13.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tmpfs: Initialize sysfs during tmpfs init
tmpfs: Fix type for sysfs' casefold attribute
libfs: Fix kernel-doc warning in generic_ci_validate_strict_name
docs: tmpfs: Add casefold options
tmpfs: Expose filesystem features via sysfs
tmpfs: Add flag FS_CASEFOLD_FL support for tmpfs dirs
tmpfs: Add casefold lookup support
libfs: Export generic_ci_ dentry functions
unicode: Recreate utf8_parse_version()
unicode: Export latest available UTF-8 version number
ext4: Use generic_ci_validate_strict_name helper
libfs: Create the helper function generic_ci_validate_strict_name()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull copy_struct_to_user helper from Christian Brauner:
"This adds a copy_struct_to_user() helper which is a companion helper
to the already widely used copy_struct_from_user().
It copies a struct from kernel space to userspace, in a way that
guarantees backwards-compatibility for struct syscall arguments as
long as future struct extensions are made such that all new fields are
appended to the old struct, and zeroed-out new fields have the same
meaning as the old struct.
The first user is sched_getattr() system call but the new extensible
pidfs ioctl will be ported to it as well"
* tag 'vfs-6.13.usercopy' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
sched_getattr: port to copy_struct_to_user
uaccess: add copy_struct_to_user helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs update from Christian Brauner:
"This adds a new ioctl to retrieve information about a pidfd.
A common pattern when using pidfds is having to get information about
the process, which currently requires /proc being mounted, resolving
the fd to a pid, and then do manual string parsing of /proc/N/status
and friends. This needs to be reimplemented over and over in all
userspace projects (e.g.: it has been reimplemented in systemd, dbus,
dbus-daemon, polkit so far), and requires additional care in checking
that the fd is still valid after having parsed the data, to avoid
races.
Having a programmatic API that can be used directly removes all these
requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct so that
more parameters can be added later if needed. Start with returning
pid/tgid/ppid and some creds unconditionally, and cgroupid optionally"
* tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfd: add ioctl to retrieve pid info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull overlayfs updates from Christian Brauner:
"Make overlayfs support specifying layers through file descriptors.
Currently overlayfs only allows specifying layers through path names.
This is inconvenient for users that want to assemble an overlayfs
mount purely based on file descriptors:
This enables user to specify both:
fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2);
in addition to:
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0);
There's also a large set of new overlayfs selftests to test new
features and some older properties"
* tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add test for specifying 500 lower layers
selftests: add overlayfs fd mounting selftests
selftests: use shared header
Documentation,ovl: document new file descriptor based layers
ovl: specify layers via file descriptors
fs: add helper to use mount option as path or fd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"Various fixes for the netfs library and related infrastructure:
cachefiles:
- Fix a dentry leak in cachefiles_open_file()
- Fix incorrect length return value in
cachefiles_ondemand_fd_write_iter()
- Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
- Clean up in cachefiles_commit_tmpfile()
- Fix NULL pointer dereference in object->file
- Add a memory barrier for FSCACHE_VOLUME_CREATING
netfs:
- Remove call to folio_index()
- Fix a few minor bugs in netfs_page_mkwrite()
- Remove unnecessary references to pages"
* tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING
cachefiles: Fix NULL pointer dereference in object->file
cachefiles: Clean up in cachefiles_commit_tmpfile()
cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
cachefiles: Fix incorrect length return value in cachefiles_ondemand_fd_write_iter()
netfs: Remove unnecessary references to pages
netfs: Fix a few minor bugs in netfs_page_mkwrite()
netfs: Remove call to folio_index()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pagecache updates from Christian Brauner:
"Cleanup filesystem page flag usage: This continues the work to make
the mappedtodisk/owner_2 flag available to filesystems which don't use
buffer heads. Further patches remove uses of Private2. This brings us
very close to being rid of it entirely"
* tag 'vfs-6.13.pagecache' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
migrate: Remove references to Private2
ceph: Remove call to PagePrivate2()
btrfs: Switch from using the private_2 flag to owner_2
mm: Remove PageMappedToDisk
nilfs2: Convert nilfs_copy_buffer() to use folios
fs: Move clearing of mappedtodisk to buffer.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust file abstractions from Christian Brauner:
"This contains the file abstractions needed by the Rust implementation
of the Binder driver and other parts of the kernel.
Let's treat this as a first attempt at getting something working but I
do expect the actual interfaces to change significantly over time.
Simply because we are still figuring out what actually works. But
there's no point in further theorizing. Let's see how it holds up with
actual users"
* tag 'vfs-6.13.rust.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: task: adjust safety comments in Task methods
rust: add seqfile abstraction
rust: file: add abstraction for `poll_table`
rust: file: add `Kuid` wrapper
rust: file: add `FileDescriptorReservation`
rust: security: add abstraction for secctx
rust: cred: add Rust abstraction for `struct cred`
rust: file: add Rust abstraction for `struct file`
rust: task: add `Task::current_raw`
rust: types: add `NotThreadSafe`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit 681ce8623567 ("vfs: Delete the associated dentry when
deleting a file") introduced an unconditional deletion of the
associated dentry when a file is removed. However, this led to
performance regressions in specific benchmarks, such as
ilebench.sum_operations/s, prompting a revert in commit
4a4be1ad3a6e ("Revert "vfs: Delete the associated dentry when
deleting a file""). This reintroduces the concept conditionally
through a sysctl
- Expand the statmount() system call:
* Report the filesystem subtype in a new fs_subtype field to
e.g., report fuse filesystem subtypes
* Report the superblock source in a new sb_source field
* Add a new way to return filesystem specific mount options in an
option array that returns filesystem specific mount options
separated by zero bytes and unescaped. This allows caller's to
retrieve filesystem specific mount options and immediately pass
them to e.g., fsconfig() without having to unescape or split
them
* Report security (LSM) specific mount options in a separate
security option array. We don't lump them together with
filesystem specific mount options as security mount options are
generic and most users aren't interested in them
The format is the same as for the filesystem specific mount
option array
- Support relative paths in fsconfig()'s FSCONFIG_SET_STRING command
- Optimize acl_permission_check() to avoid costly {g,u}id ownership
checks if possible
- Use smp_mb__after_spinlock() to avoid full smp_mb() in evict()
- Add synchronous wakeup support for ep_poll_callback.
Currently, epoll only uses wake_up() to wake up task. But sometimes
there are epoll users which want to use the synchronous wakeup flag
to give a hint to the scheduler, e.g., the Android binder driver.
So add a wake_up_sync() define, and use wake_up_sync() when sync is
true in ep_poll_callback()
Fixes:
- Fix kernel documentation for inode_insert5() and iget5_locked()
- Annotate racy epoll check on file->f_ep
- Make F_DUPFD_QUERY associative
- Avoid filename buffer overrun in initramfs
- Don't let statmount() return empty strings
- Add a cond_resched() to dump_user_range() to avoid hogging the CPU
- Don't query the device logical blocksize multiple times for hfsplus
- Make filemap_read() check that the offset is positive or zero
Cleanups:
- Various typo fixes
- Cleanup wbc_attach_fdatawrite_inode()
- Add __releases annotation to wbc_attach_and_unlock_inode()
- Add hugetlbfs tracepoints
- Fix various vfs kernel doc parameters
- Remove obsolete TODO comment from io_cancel()
- Convert wbc_account_cgroup_owner() to take a folio
- Fix comments for BANDWITH_INTERVAL and wb_domain_writeout_add()
- Reorder struct posix_acl to save 8 bytes
- Annotate struct posix_acl with __counted_by()
- Replace one-element array with flexible array member in freevxfs
- Use idiomatic atomic64_inc_return() in alloc_mnt_ns()"
* tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
statmount: retrieve security mount options
vfs: make evict() use smp_mb__after_spinlock instead of smp_mb
statmount: add flag to retrieve unescaped options
fs: add the ability for statmount() to report the sb_source
writeback: wbc_attach_fdatawrite_inode out of line
writeback: add a __releases annoation to wbc_attach_and_unlock_inode
fs: add the ability for statmount() to report the fs_subtype
fs: don't let statmount return empty strings
fs:aio: Remove TODO comment suggesting hash or array usage in io_cancel()
hfsplus: don't query the device logical block size multiple times
freevxfs: Replace one-element array with flexible array member
fs: optimize acl_permission_check()
initramfs: avoid filename buffer overrun
fs/writeback: convert wbc_account_cgroup_owner to take a folio
acl: Annotate struct posix_acl with __counted_by()
acl: Realign struct posix_acl to save 8 bytes
epoll: Add synchronous wakeup support for ep_poll_callback
coredump: add cond_resched() to dump_user_range
mm/page-writeback.c: Fix comment of wb_domain_writeout_add()
mm/page-writeback.c: Update comment for BANDWIDTH_INTERVAL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount api conversions from Christian Brauner:
"Convert adfs, affs, befs, hfs, hfsplus, jfs, and hpfs to the new mount
api"
* tag 'vfs-6.13.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
efs: fix the efs new mount api implementation
ubifs: Convert ubifs to use the new mount API
hpfs: convert hpfs to use the new mount api
jfs: convert jfs to use the new mount api
hfsplus: convert hfsplus to use the new mount api
hfs: convert hfs to use the new mount api
befs: convert befs to use the new mount api
affs: convert affs to use the new mount api
adfs: convert adfs to use the new mount api
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
|
|
A timer sigqueue may find itself already pending when it is tried to
be enqueued. This situation can happen if the timer sigqueue is enqueued
but then the timer is reset afterwards and fires before the pending
signal managed to be delivered.
However when such a double enqueue occurs while the corresponding signal
is ignored, the sigqueue is expected to be found either on the dedicated
ignored list if the timer was periodic or dropped if the timer was
one-shot. In any case it is not supposed to be queued on the real signal
queue.
An assertion verifies the latter expectation on top of the return value
of prepare_signal(), assuming "false" means that the signal is being
ignored. But prepare_signal() may also fail if the target is exiting as
the last task of its group. In this case the double enqueue observes the
sigqueue queued, as in such a situation:
TASK A (same group as B) TASK B (same group as A)
------------------------ ------------------------
// timer event
// queue signal to TASK B
posix_timer_queue_signal()
// reset timer through syscall
do_timer_settime()
// exit, leaving task B alone
do_exit()
do_exit()
synchronize_group_exit()
signal->flags = SIGNAL_GROUP_EXIT
// ========> <IRQ> timer event
posix_timer_queue_signal()
// return false due to SIGNAL_GROUP_EXIT
if (!prepare_signal())
WARN_ON_ONCE(!list_empty(&q->list))
And this spuriously triggers this warning:
WARNING: CPU: 0 PID: 5854 at kernel/signal.c:2008 posixtimer_send_sigqueue
CPU: 0 UID: 0 PID: 5854 Comm: syz-executor139 Not tainted 6.12.0-rc6-next-20241108-syzkaller #0
RIP: 0010:posixtimer_send_sigqueue+0x9da/0xbc0 kernel/signal.c:2008
Call Trace:
<IRQ>
alarm_handle_timer
alarmtimer_fired
__run_hrtimer
__hrtimer_run_queues
hrtimer_interrupt
local_apic_timer_interrupt
__sysvec_apic_timer_interrupt
instr_sysvec_apic_timer_interrupt
sysvec_apic_timer_interrupt
</IRQ>
Fortunately the recovery code in that case already does the right thing:
just exit from posixtimer_send_sigqueue() and wait for __exit_signal()
to flush the pending signal. Just make sure to warn only the case when
the sigqueue is queued and the signal is really ignored.
Fixes: df7a996b4dab ("signal: Queue ignored posixtimers on ignore list")
Reported-by: syzbot+852e935b899bde73626e@syzkaller.appspotmail.com
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: syzbot+852e935b899bde73626e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/20241116234823.28497-1-frederic@kernel.org
Closes: https://lore.kernel.org/all/673549c6.050a0220.1324f8.008c.GAE@google.com
|
|
When using both function tracer and function graph simultaneously,
it is found that function tracer sometimes captures a fake parent ip
(return_to_handler) instead of the true parent ip.
This issue is easy to reproduce. Below are my reproduction steps:
jeff-labs:~/bin # ./trace-net.sh
jeff-labs:~/bin # cat /sys/kernel/debug/tracing/instances/foo/trace | grep return_to_handler
trace-net.sh-405 [001] ...2. 31.859501: avc_has_perm+0x4/0x190 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...2. 31.859503: simple_setattr+0x4/0x70 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...2. 31.859503: truncate_pagecache+0x4/0x60 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...2. 31.859505: unmap_mapping_range+0x4/0x140 <-return_to_handler+0x0/0x40
trace-net.sh-405 [001] ...3. 31.859508: _raw_spin_unlock+0x4/0x30 <-return_to_handler+0x0/0x40
[...]
The following is my simple trace script:
<snip>
jeff-labs:~/bin # cat ./trace-net.sh
TRACE_PATH="/sys/kernel/tracing"
set_events() {
echo 1 > $1/events/net/enable
echo 1 > $1/events/tcp/enable
echo 1 > $1/events/sock/enable
echo 1 > $1/events/napi/enable
echo 1 > $1/events/fib/enable
echo 1 > $1/events/neigh/enable
}
set_events ${TRACE_PATH}
echo 1 > ${TRACE_PATH}/options/sym-offset
echo 1 > ${TRACE_PATH}/options/funcgraph-tail
echo 1 > ${TRACE_PATH}/options/funcgraph-proc
echo 1 > ${TRACE_PATH}/options/funcgraph-abstime
echo 'tcp_orphan*' > ${TRACE_PATH}/set_ftrace_notrace
echo function_graph > ${TRACE_PATH}/current_tracer
INSTANCE_FOO=${TRACE_PATH}/instances/foo
if [ ! -e $INSTANCE_FOO ]; then
mkdir ${INSTANCE_FOO}
fi
set_events ${INSTANCE_FOO}
echo 1 > ${INSTANCE_FOO}/options/sym-offset
echo 'tcp_orphan*' > ${INSTANCE_FOO}/set_ftrace_notrace
echo function > ${INSTANCE_FOO}/current_tracer
echo 1 > ${TRACE_PATH}/tracing_on
echo 1 > ${INSTANCE_FOO}/tracing_on
echo > ${TRACE_PATH}/trace
echo > ${INSTANCE_FOO}/trace
</snip>
Link: https://lore.kernel.org/20241008033159.22459-1-jeff.xie@linux.dev
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info.
Cc: stable@kernel.org
Fixes: d2f277e26f52 ("fsnotify: rename fsnotify_{get,put}_sb_connectors()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again.
Fixes: 3a747f4a2ee8 ("dlm: move rsb root_list to ls_recover() stack")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Problem: When using kdb via keyboard it does not react to control
characters which are supported in serial mode.
Example: Chords such as ctrl+a/e/d/p do not work in keyboard mode
Solution: Before disregarding non-printable key characters, check if they
are one of the supported control characters, I have took the control
characters from the switch case upwards in this function that translates
scan codes of arrow keys/backspace/home/.. to the control characters.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241111215622.GA161253@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Going forward, I'll be using my kernel.org address for upstream work.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241108-new-maintainer-address-2-v1-2-47c9d71aac11@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
The word "trace" begins with a consonant sound,
so "a" should be used instead of "an".
Link: https://lore.kernel.org/20241107095327.6390-1-liujing@cmss.chinamobile.com
Signed-off-by: liujing <liujing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
LS7A HD-Audio disable interrupts and use polling mode due to hardware
drawbacks. As a result, unsolicited jack events are also unusable. If
we want to support headphone hotplug, we need to also poll jack events.
Here we use 1500ms as the poll interval if no module parameter specify
it.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20241115150653.2819100-1-chenhuacai@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.12 devel branch for further HD-audio and USB-audio fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
|
|
|
|
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: enable DSCP to priority map for RX
Configure default DSCP to User Priority mapping registers as per:
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
Also update Priority to Thread maping to be compliant with
IEEE802.1Q-2014. Priority Code Point (PCP) 2 is higher priority than
PCP 0 (Best Effort). PCP 1 (Background) is lower priority than
PCP 0 (Best Effort).
---
Changes in v4:
- Updated default DSCP to User Priority mapping as per
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
- Link to v3: https://lore.kernel.org/r/20241109-am65-cpsw-multi-rx-dscp-v3-0-1cfb76928490@kernel.org
Changes in v3:
- Added Reviewed-by tag to patch 1
- Added macros for DSCP PRI field size and DSCP PRI per register
- Drop unnecessary readl() in am65_cpsw_port_set_dscp_map()
- Link to v2: https://lore.kernel.org/r/20241107-am65-cpsw-multi-rx-dscp-v2-0-9e9cd1920035@kernel.org
Changes in v2:
- Updated references to more recent standard IEEE802.1Q-2014.
- Dropped reference to web link which might change in the future.
- Typo fix in commit log.
- Link to v1: https://lore.kernel.org/r/20241105-am65-cpsw-multi-rx-dscp-v1-0-38db85333c88@kernel.org
====================
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AM65 CPSW hardware can map the 6-bit DSCP/TOS field to
appropriate priority queue via DSCP to Priority mapping registers
(CPSW_PN_RX_PRI_MAP_REG).
Use a default DSCP to User Priority (UP) mapping as per
https://datatracker.ietf.org/doc/html/rfc8325#section-4.3
and
https://datatracker.ietf.org/doc/html/rfc8622#section-11
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IEEE802.1Q-2014 supersedes IEEE802.1D-2004. Now Priority Code Point (PCP)
2 is no longer at a lower priority than PCP 0. PCP 1 (Background) is still
at a lower priority than PCP 0 (Best Effort).
Reference:
IEEE802.1Q-2014, Standard for Local and metropolitan area networks
Table I-2 - Traffic type acronyms
Table I-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Philo Lu says:
====================
udp: Add 4-tuple hash for connected sockets
This patchset introduces 4-tuple hash for connected udp sockets, to make
connected udp lookup faster.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Patch1: Add a new counter for hslot2 named hash4_cnt, to avoid cache line
miss when lookup.
Patch2: Add hslot/hlist_nulls for 4-tuple hash.
Patch3 and 4: Implement 4-tuple hash for ipv4 and ipv6.
The detailed motivation is described in Patch 3.
The 4-tuple hash increases the size of udp_sock and udp_hslot. Thus add it
with CONFIG_BASE_SMALL, i.e., it's a no op with CONFIG_BASE_SMALL.
Intentionally, the feature is not available for udplite. Though udplite
shares some structs and functions with udp, its connect() keeps unchanged.
So all udplite sockets perform the same as un-connected udp sockets.
Besides, udplite also shares the additional memory consumption in udp_sock
and udptable.
changelogs:
v8 -> v9 (Paolo Abeni):
- Add explanation about udplite in cover letter
- Update tags for co-developers
- Add acked-by tags of Paolo and Willem
v7 -> v8:
- add EXPORT_SYMBOL for ipv6.ko build
v6 -> v7 (Kuniyuki Iwashima):
- export udp_ehashfn to be used by udpv6 rehash
v5 -> v6 (Paolo Abeni):
- move udp_table_hash4_init from patch2 to patch1
- use hlist_nulls for lookup-rehash race
- add test results in commit log
- add more comment, e.g., for rehash4 used in hash4
- add ipv6 support (Patch4), and refactor some functions for better
sharing, without functionality change
v4 -> v5 (Paolo Abeni):
- add CONFIG_BASE_SMALL with which udp hash4 does nothing
v3 -> v4 (Willem de Bruijn):
- fix mistakes in udp_pernet_table_alloc()
RFCv2 -> v3 (Gur Stavi):
- minor fix in udp_hashslot2() and udp_table_init()
- add rcu sync in rehash4()
RFCv1 -> RFCv2:
- add a new struct for hslot2
- remove the sockopt UDP_HASH4 because it has little side effect for
unconnected sockets
- add rehash in connect()
- re-organize the patch into 3 smaller ones
- other minor fix
v8:
https://lore.kernel.org/all/20241108054836.123484-1-lulie@linux.alibaba.com/
v7:
https://lore.kernel.org/all/20241105121225.12513-1-lulie@linux.alibaba.com/
v6:
https://lore.kernel.org/all/20241031124550.20227-1-lulie@linux.alibaba.com/
v5:
https://lore.kernel.org/all/20241018114535.35712-1-lulie@linux.alibaba.com/
v4:
https://lore.kernel.org/all/20241012012918.70888-1-lulie@linux.alibaba.com/
v3:
https://lore.kernel.org/all/20241010090351.79698-1-lulie@linux.alibaba.com/
RFCv2:
https://lore.kernel.org/all/20240924110414.52618-1-lulie@linux.alibaba.com/
RFCv1:
https://lore.kernel.org/all/20240913100941.8565-1-lulie@linux.alibaba.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
