| Age | Commit message (Collapse) | Author |
|---|
|
When firmware loading is disabled, gcc warns that the local
'fw' variable fails to get initialized:
sound/soc/codecs/sma1307.c: In function 'sma1307_setting_loaded.isra':
sound/soc/codecs/sma1307.c:1717:12: error: 'fw' is used uninitialized [-Werror=uninitialized]
1717 | if (!fw) {
| ^
sound/soc/codecs/sma1307.c:1712:32: note: 'fw' was declared here
1712 | const struct firmware *fw;
Check the return code from request_firmware() to ensure that the
firmware is correctly set, and drop the incorrect release_firmware()
on that uninitialized data.
Fixes: 576c57e6b4c1 ("ASoC: sma1307: Add driver for Iron Device SMA1307")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241113175734.2443315-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If there were no anamolies noted, then we can simply remove the log file
and return, but only after the path variable has been initialized.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930012757.2395-1-zhangjiao2@cmss.chinamobile.com
|
|
When queueing a set element add or removal operation to the transaction
log, check if the previous operation already asks for a the identical
operation on the same set.
If so, store the element reference in the preceding operation.
This significantlty reduces memory consumption when many set add/delete
operations appear in a single transaction.
Example: 10k elements require 937kb of memory (10k allocations from
kmalloc-96 slab).
Assuming we can compact 4 elements in the same set, 468 kbytes
are needed (64 bytes for base struct, nft_trans_elemn, 32 bytes
for nft_trans_one_elem structure, so 2500 allocations from kmalloc-192
slab).
For large batch updates we can compact up to 62 elements
into one single nft_trans_elem structure (~65% mem reduction):
(64 bytes for base struct, nft_trans_elem, 32 byte for nft_trans_one_elem
struct).
We can halve size of nft_trans_one_elem struct by moving
timeout/expire/update_flags into a dynamically allocated structure,
this allows to store 124 elements in a 2k slab nft_trans_elem struct.
This is done in a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nftables audit log format emits the number of added/deleted rules, sets,
set elements and so on, to userspace:
table=t1 family=2 entries=4 op=nft_register_set
~~~~~~~~~
At this time, the 'entries' key is the number of transactions that will
be applied.
The upcoming set element compression will coalesce subsequent
adds/deletes to the same set requests in the same transaction
request to conseve memory.
Without this patch, we'd under-report the number of altered elements.
Increment the audit counter by the number of elements to keep the reported
entries value the same.
Without this, nft_audit.sh selftest fails because the recorded
(expected) entries key is smaller than the expected one.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helpers to release the individual elements contained in the
trans_elem container structure.
No functional change intended.
Followup patch will add 'nelems' member and will turn 'priv' into
a flexible array.
These helpers can then loop over all elements.
Care needs to be taken to handle a mix of new elements and existing
elements that are being updated (e.g. timeout refresh).
Before this patch, NEWSETELEM transaction with update is released
early so nft_trans_set_elem_destroy() won't get called, so we need
to skip elements marked as update.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add and use a wrapper to append trans_elem structures to the
transaction log.
Unlike the existing helper, pass a gfp_t to indicate if sleeping
is allowed.
This will be used by a followup patch to realloc nft_trans_elem
structures after they gain a flexible array member to reduce
number of such container structures on the transaction list.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of request_module() is potentially insecure.
E.g. clang-18 says:
.../nf_bpf_link.c:46:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
46 | err = request_module(mod);
| ^~~
.../kmod.h:25:55: note: expanded from macro 'request_module'
25 | #define request_module(mod...) __request_module(true, mod)
| ^~~
.../nf_bpf_link.c:46:24: note: treat the string as an argument to avoid this
46 | err = request_module(mod);
| ^
| "%s",
.../kmod.h:25:55: note: expanded from macro 'request_module'
25 | #define request_module(mod...) __request_module(true, mod)
| ^
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Needed for new Intel board file changes.
|
|
The nftables batch processing does not currently populate extack with
policy errors. Fix this by passing extack when parsing batch messages.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
simple-mux immediately activates the new output, even when it is powered
down. This can be undesirable in some cases, for example when a
mechanical relais is used.
Adds "idle-state" property from the mux controller to select the output
state to be used when the mux is powered down.
Signed-off-by: Hendrik v. Raven <h.v.raven@merzmedtech.de>
Link: https://patch.msgid.link/20241114-simple-mux-idle-state-v2-2-a30cb37d2be2@merzmedtech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
So far the mux changes it state immediately, even when not in use. Allow
overriding this behaviour by specifying an optional idle-state. This
state is used whenever the mux is powered down, only switching to the
selected state on power up. If unspecified it defaults to as-is,
maintaining the previous behaviour.
Signed-off-by: Hendrik v. Raven <h.v.raven@merzmedtech.de>
Link: https://patch.msgid.link/20241114-simple-mux-idle-state-v2-1-a30cb37d2be2@merzmedtech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently this cannot lookup symbol beyond 64 characters in some cases
like "ls", "lp" and "t"
Fix this by using KSYM_NAME_LEN instead of fixed 64 characters
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241024191232.1570894-2-mchauras@linux.ibm.com
|
|
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
arch/powerpc/platforms/82xx/ep8248e.c: In function 'ep8248e_mdio_probe':
arch/powerpc/platforms/82xx/ep8248e.c:131:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
131 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241014-ep8248e-pa-fmt-v1-1-009ea0dcc18f@kernel.org
|
|
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930112121.95324-12-Julia.Lawall@inria.fr
|
|
|
|
Fix typo in the following kvm function names from:
kmvhv_counters_tracepoint_regfunc -> kvmhv_counters_tracepoint_regfunc
kmvhv_counters_tracepoint_unregfunc -> kvmhv_counters_tracepoint_unregfunc
Fixes: e1f288d2f9c6 ("KVM: PPC: Book3S HV nestedv2: Add support for reading VPA counters for pseries guests")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241114085020.1147912-1-kjain@linux.ibm.com
|
|
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The function strncpy is deprecated since it does not guarantee the
destination buffer is NULL terminated. Recommended replacement is
strscpy. The padded version was used to remain consistent with the other
strscpy_pad usage in the modified function.
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Wait for the command transmission to be completed in the DSI transfer
function polling for the dc_start bit to go back to idle state after the
transmission is started.
This is documented in the datasheet and failures to do so lead to
commands corruption.
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240926141246.48282-1-francesco@dolcini.it
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926141246.48282-1-francesco@dolcini.it
|
|
Early return in i2cdev_ioctl_rdwr() failed to free the memory allocated
by the caller. Move freeing the memory to the function where it has been
allocated to prevent similar leaks in the future.
Fixes: 97ca843f6ad3 ("i2c: dev: Check for I2C_FUNC_I2C before calling i2c_transfer")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
[wsa: replaced '== NULL' with '!']
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Hangbin Liu says:
====================
bonding: fix ns targets not work on hardware NIC
The first patch fixed ns targets not work on hardware NIC when bonding
set arp_validate.
The second patch add a related selftest for bonding.
v4: Thanks Nikolay for the comments:
use bond_slave_ns_maddrs_{add/del} with clear name
fix comments typos
remove _slave_set_ns_maddrs underscore directly
update bond_option_arp_validate_set() change logic
v3: use ndisc_mc_map to convert the mcast mac address (Jay Vosburgh)
v2: only add/del mcast group on backup slaves when arp_validate is set (Jay Vosburgh)
arp_validate doesn't support 3ad, tlb, alb. So let's only do it on ab mode.
====================
Link: https://patch.msgid.link/20241111101650.27685-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test to make sure the backup slaves join correct multicast group
when arp_validate enabled and ns_ip6_target is set. Here is the result:
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
DIP algorithm requires a one-to-one mapping between dgid and dip_idx.
Currently a queue 'spare_idx' is used to store QPN of QPs that use
DIP algorithm. For a new dgid, use a QPN from spare_idx as dip_idx.
This method lacks a mechanism for deduplicating QPN, which may result
in different dgids sharing the same dip_idx and break the one-to-one
mapping requirement.
This patch replaces spare_idx with xarray and introduces a refcnt of
a dip_idx to indicate the number of QPs that using this dip_idx.
The state machine for dip_idx management is implemented as:
* The entry at an index in xarray is empty -- This indicates that the
corresponding dip_idx hasn't been created.
* The entry at an index in xarray is not empty but with 0 refcnt --
This indicates that the corresponding dip_idx has been created but
not used as dip_idx yet.
* The entry at an index in xarray is not empty and with non-0 refcnt --
This indicates that the corresponding dip_idx is being used by refcnt
number of DIP QPs.
Fixes: eb653eda1e91 ("RDMA/hns: Bugfix for incorrect association between dip_idx and dgid")
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Feng Fang <fangfeng4@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241112055553.3681129-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The is_mgtime test checks whether the FS_MGTIME flag is set in the
fstype. To get there from the inode though, we have to dereference 3
pointers.
Add a new IOP_MGTIME flag, and have inode_init_always() set that flag
when the fstype flag is set. Then, make is_mgtime test for IOP_MGTIME
instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241113-mgtime-v1-1-84e256980e11@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On RZ/Five, which is non-coherent, and uses CONFIG_DMA_GLOBAL_POOL=y:
Oops - store (or AMO) access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: swapper Not tainted 6.12.0-rc1-00015-g8a6e02d0c00e #201
Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
epc : __memset+0x60/0x100
ra : __dma_alloc_from_coherent+0x150/0x17a
epc : ffffffff8062d2bc ra : ffffffff80053a94 sp : ffffffc60000ba20
gp : ffffffff812e9938 tp : ffffffd601920000 t0 : ffffffc6000d0000
t1 : 0000000000000000 t2 : ffffffffe9600000 s0 : ffffffc60000baa0
s1 : ffffffc6000d0000 a0 : ffffffc6000d0000 a1 : 0000000000000000
a2 : 0000000000001000 a3 : ffffffc6000d1000 a4 : 0000000000000000
a5 : 0000000000000000 a6 : ffffffd601adacc0 a7 : ffffffd601a841a8
s2 : ffffffd6018573c0 s3 : 0000000000001000 s4 : ffffffd6019541e0
s5 : 0000000200000022 s6 : ffffffd6018f8410 s7 : ffffffd6018573e8
s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000010
s11: 0000000000000000 t3 : 0000000000000000 t4 : ffffffffdefe62d1
t5 : 000000001cd6a3a9 t6 : ffffffd601b2aad6
status: 0000000200000120 badaddr: ffffffc6000d0000 cause: 0000000000000007
[<ffffffff8062d2bc>] __memset+0x60/0x100
[<ffffffff80053e1a>] dma_alloc_from_global_coherent+0x1c/0x28
[<ffffffff80053056>] dma_direct_alloc+0x98/0x112
[<ffffffff8005238c>] dma_alloc_attrs+0x78/0x86
[<ffffffff8035fdb4>] rz_dmac_probe+0x3f6/0x50a
[<ffffffff803a0694>] platform_probe+0x4c/0x8a
If CONFIG_DMA_GLOBAL_POOL=y, the reserved_mem structure passed to
rmem_dma_setup() is saved for later use, by saving the passed pointer.
However, when dma_init_reserved_memory() is called later, the pointer
has become stale, causing a crash.
E.g. in the RZ/Five case, the referenced memory now contains the
reserved_mem structure for the "mmode_resv0@30000" node (with base
0x30000 and size 0x10000), instead of the correct "pma_resv0@58000000"
node (with base 0x58000000 and size 0x8000000).
Fix this by saving the needed reserved_mem structure's contents instead.
Fixes: 8a6e02d0c00e7b62 ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
It literally directly follows a spin_lock() call.
This whacks an explicit barrier on x86-64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241113155103.4194099-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
|
|
Break the assignment logic for misc flags into their own respective
functions to reduce the complexity of the nested logic.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-5-coltonlewis@google.com
|
|
Make sure PowerPC uses the arch-specific function now that those have
been reorganized.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-4-coltonlewis@google.com
|
|
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
|
|
For ARM's implementation, perf_instruction_pointer() and
perf_misc_flags() are equivalent to the generic versions in
include/linux/perf_event.h so arch/arm doesn't need to provide its
own versions. Drop them here.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-2-coltonlewis@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.13-rc1
- add support for the lockable page on ST M24256E
|
|
Constify the i2c_device_id structure in the doc to give a cleaner starting
point.
Also remove an empty line which is usually not added.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The first PPS latch time needs to be calculated by the driver
(in rounded off seconds) and configured as the start time
offset for the cycle. After synchronizing two PTP clocks
running as master/slave, missing this would cause master
and slave to start immediately with some milliseconds
drift which causes the PPS signal to never synchronize with
the PTP master.
Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20241111095842.478833-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A kernel test robot detected a missing error code:
qmc.c:1942 qmc_probe() warn: missing error code 'ret'
Indeed, the error returned by platform_get_irq() is checked and the
operation is aborted in case of failure but the ret error code is
not set in that case.
Set the ret error code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/
Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
of_find_compatible_node() requires a call to of_node_put() when the
pointer to the node is not required anymore to decrement its refcount
and avoid leaking memory.
Add the missing call to of_node_put() after the node has been used.
Cc: stable@vger.kernel.org
Fixes: e95f287deed2 ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The non-scoped variant of this macro turns error-prone as soon as error
paths are included, because explicit calls to of_node_put() are required
to avoid leaking memory.
Using its scoped counterpart simplifies the code by removing the need of
explicit calls to of_node_put(), as they are automatically triggered as
soon as the child node goes out of scope. Moreover, it is more robust as
it accounts for new error paths without having to worry about
decrementing the object's refcount.
Note that the device_node is declared within the macro, and its explicit
declaration can be dropped as well if it is not used anywhere else.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241002-tsa-scoped-v1-1-ba6a6d657f82@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Error handling is missing when call to nla_put_u32() fails.
Handle the error when the call to nla_put_u32() returns an error.
The error was reported by Coverity Scan.
Report:
CID 1601525: (#1 of 1): Unused value (UNUSED_VALUE)
returned_value: Assigning value from nla_put_u32(skb, XFRMA_SA_PCPU, x->pcpu_num)
to err here, but that stored value is overwritten before it can be used
Fixes: 1ddf9916ac09 ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The 'vmw_user_object_buffer' function may return NULL with incorrect
inputs. To avoid possible null pointer dereference, add a check whether
the 'bo' is NULL in the vmw_framebuffer_surface_create_handle.
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029083429.1185479-1-chenridong@huaweicloud.com
|
|
As the size of a directory increases item creation slows down.
Optimizing access to s_children removes this bottleneck.
dirents are already pinned into the cache, there is no need to scan the
s_children list looking for duplicate Items. The configfs_dirent_exists
check is moved to a location where it is called only during subsystem
initialization.
d_lookup will only need to call configfs_lookup in the case where the
item in question is not pinned to dcache. The only items not pinned to
dcache are attributes. These are placed at the front of the s_children
list, whilst pinned items are inserted at the back. configfs_lookup
stops scanning when it encounters the first pinned entry in s_children.
The assumption of the above optimizations is that there will be few
attributes, but potentially many Items in a given directory.
Signed-off-by: Seamus Connor <sconnor@purestorage.com>
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
configfs_hash_and_remove() has been unused since it was added in 2005
by commit
7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Tristram Ha says:
====================
net: dsa: microchip: Add LAN9646 switch support
This series of patches is to add LAN9646 switch support to the KSZ DSA
driver.
====================
Link: https://patch.msgid.link/20241109015705.82685-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has
4 internal PHYs and 1 SGMII port. The chip id read from hardware is
same as KSZ9477, so software driver needs to create a new chip id and
group allowable functions under its chip data structure to
differentiate the product.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/20241109015705.82685-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has
4 internal PHYs and 1 SGMII port.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241109015705.82685-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe,
it should not be disabled in any path.
Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241108173334.2973603-1-mordan@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31dd ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mediatek,mac-wol property is being handled backwards to what is
described in the binding: it currently enables PHY WOL when the property
is present and vice versa. Invert the driver logic so it matches the
binding description.
Fixes: fd1d62d80ebc ("net: stmmac: replace the use_phy_wol field with a flag")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20241109-mediatek-mac-wol-noninverted-v2-1-0e264e213878@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions are not used outside of sstep.c
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241001130356.14664-1-msuchanek@suse.de
|
