summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-31net/mlx5: CT: Fix header-rewrite re-use for tupelsPaul Blakey
Tuple entries that don't have nat configured for them which are added to the ct nat table will always create a new modify header, as we don't check for possible re-use on them. The same for tuples that have nat configured for them but are added to ct table. Fix the above by only avoiding wasteful re-use lookup for actually natted entries in ct nat table. Fixes: 7fac5c2eced3 ("net/mlx5: CT: Avoid reusing modify header context for natted entries") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31net/mlx5e: TC NIC mode, fix tc chains miss tableMaor Dickman
The cited commit changed promisc table to be created on demand with the highest priority in the NIC table replacing the vlan table, this caused tc NIC tables miss flow to skip the prmoisc table because it use vlan table as miss table. OVS offload in NIC mode use promisc by default so any unicast packet which will be handled by tc NIC tables miss flow will skip the promisc rule and will be dropped. Fix this by adding new empty table in new tc level with low priority and point the nic tc chain miss to it, the new table is managed so it will point to vlan table if promisc is disabled and to promisc table if enabled. Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31net/mlx5: Don't use already freed action pointerLeon Romanovsky
The call to mlx5dr_action_destroy() releases "action" memory. That pointer is set to miss_action later and generates the following smatch error: drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c:53 set_miss_action() warn: 'action' was already freed. Make sure that the pointer is always valid by setting NULL after destroy. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31dm verity: set DM_TARGET_IMMUTABLE feature flagSarthak Kukreti
The device-mapper framework provides a mechanism to mark targets as immutable (and hence fail table reloads that try to change the target type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's feature flags to prevent switching the verity target with a different target type. Fixes: a4ffc152198e ("dm: add verity target") Cc: stable@vger.kernel.org Signed-off-by: Sarthak Kukreti <sarthakkukreti@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-05-31MAINTAINERS: Update Lorenzo Pieralisi's email addressLorenzo Pieralisi
I will soon lose my @arm.com email address, so to prevent any possible issue let's update all kernel references (inclusive of .mailmap) to my @kernel.org alias ahead of time. My @arm.com address is still working and will likely resume to work at some point in the future; nonetheless, it is safer to switch to the @kernel.org alias from now onwards so that continuity is guaranteed. Link: https://lore.kernel.org/r/20220528151411.29810-1-lorenzo.pieralisi@arm.com Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com>
2022-05-31PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299Bjorn Helgaas
92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted braces around the new Elo i2 entry, so it overwrote the existing Gigabyte X299 entry. Add the appropriate braces. Found by: $ make W=1 drivers/pci/pci.o CC drivers/pci/pci.o drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init] 2974 | .ident = "Elo i2", | ^~~~~~~~ Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas Fixes: 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.15+
2022-05-31Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"Bjorn Helgaas
This reverts commit 830aa6f29f07a4e2f1a947dfa72b3ccddb46dd21. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-5-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"Bjorn Helgaas
This reverts commit 67211aadcb4b968d0fdc57bc27240fa71500c2d4. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-4-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Revert "PCI: brcmstb: Add control of subdevice voltage regulators"Bjorn Helgaas
This reverts commit 93e41f3fca3d4a0f927b784012338c37f80a8a80. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-3-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"Bjorn Helgaas
This reverts commit 11ed8b8624b8085f706864b4addcd304b1e4fc38. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-2-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31dm table: fix dm_table_supports_poll to return false if no data devicesMike Snitzer
It was reported that the "generic/250" test in xfstests (which uses the dm-error target) demonstrates a regression where the kernel crashes in bioset_exit(). Since commit cfc97abcbe0b ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset") the bioset_init() for the dm_io bioset will setup the bioset's per-cpu alloc cache if all devices have QUEUE_FLAG_POLL set. But there was an bug where a target that doesn't have any data devices (and that doesn't even set the .iterate_devices dm target callback) will incorrectly return true from dm_table_supports_poll(). Fix this by updating dm_table_supports_poll() to follow dm-table.c's well-worn pattern for testing that _all_ targets in a DM table do in fact have underlying devices that set QUEUE_FLAG_POLL. NOTE: An additional block fix is still needed so that bio_alloc_cache_destroy() clears the bioset's ->cache member. Otherwise, a DM device's table reload that transitions the DM device's bioset from using a per-cpu alloc cache to _not_ using one will result in bioset_exit() crashing in bio_alloc_cache_destroy() because dm's dm_io bioset ("io_bs") was left with a stale ->cache member. Fixes: cfc97abcbe0b ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset") Reported-by: Matthew Wilcox <willy@infradead.org> Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-05-31Merge tag 'iommu-updates-v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Intel VT-d driver updates: - Domain force snooping improvement. - Cleanups, no intentional functional changes. - ARM SMMU driver updates: - Add new Qualcomm device-tree compatible strings - Add new Nvidia device-tree compatible string for Tegra234 - Fix UAF in SMMUv3 shared virtual addressing code - Force identity-mapped domains for users of ye olde SMMU legacy binding - Minor cleanups - Fix a BUG_ON in the vfio_iommu_group_notifier: - Groundwork for upcoming iommufd framework - Introduction of DMA ownership so that an entire IOMMU group is either controlled by the kernel or by user-space - MT8195 and MT8186 support in the Mediatek IOMMU driver - Make forcing of cache-coherent DMA more coherent between IOMMU drivers - Fixes for thunderbolt device DMA protection - Various smaller fixes and cleanups * tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits) iommu/amd: Increase timeout waiting for GA log enablement iommu/s390: Tolerate repeat attach_dev calls iommu/vt-d: Remove hard coding PGSNP bit in PASID entries iommu/vt-d: Remove domain_update_iommu_snooping() iommu/vt-d: Check domain force_snooping against attached devices iommu/vt-d: Block force-snoop domain attaching if no SC support iommu/vt-d: Size Page Request Queue to avoid overflow condition iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller iommu/vt-d: Change return type of dmar_insert_one_dev_info() iommu/vt-d: Remove unneeded validity check on dev iommu/dma: Explicitly sort PCI DMA windows iommu/dma: Fix iova map result check bug iommu/mediatek: Fix NULL pointer dereference when printing dev_name iommu: iommu_group_claim_dma_owner() must always assign a domain iommu/arm-smmu: Force identity domains for legacy binding iommu/arm-smmu: Support Tegra234 SMMU dt-bindings: arm-smmu: Add compatible for Tegra234 SOC dt-bindings: arm-smmu: Document nvidia,memory-controller property iommu/arm-smmu-qcom: Add SC8280XP support dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP ...
2022-05-31Merge tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze updates from Michal Simek: - Fix issues with freestanding - Wire memblock_dump_all() - Add support for memory reservation from DT * tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: fix typos in comments microblaze: Add support for reserved memory defined by DT microblaze: Wire memblock_dump_all() microblaze: Use simple memmove/memcpy implementation from lib/string.c microblaze: Do loop unrolling for optimized memset implementation microblaze: Use simple memset implementation from lib/string.c
2022-05-31erofs: fix 'backmost' member of z_erofs_decompress_frontendWeizhao Ouyang
Initialize 'backmost' to true in DECOMPRESS_FRONTEND_INIT. Fixes: 5c6dcc57e2e5 ("erofs: get rid of `struct z_erofs_collector'") Signed-off-by: Weizhao Ouyang <o451686892@gmail.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20220530075114.918874-1-o451686892@gmail.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-05-31erofs: simplify z_erofs_pcluster_readmore()Gao Xiang
Get rid of unnecessary label `skip'. No logic changes. Link: https://lore.kernel.org/r/20220529055425.226363-4-xiang@kernel.org Acked-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-05-31erofs: get rid of label `restart_now'Gao Xiang
Simplify this part of code. No logic changes. Link: https://lore.kernel.org/r/20220529055425.226363-3-xiang@kernel.org Acked-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-05-31erofs: get rid of `struct z_erofs_collection'Gao Xiang
It was incompletely introduced for deduplication between different logical extents backed with the same pcluster. We will have a better in-memory representation in the next release cycle for this, as well as partial memory folios support. So get rid of it instead. No logic changes. Link: https://lore.kernel.org/r/20220529055425.226363-2-xiang@kernel.org Acked-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2022-05-31xen/netback: fix incorrect usage of RING_HAS_UNCONSUMED_REQUESTS()Juergen Gross
Commit 6fac592cca60 ("xen: update ring.h") missed to fix one use case of RING_HAS_UNCONSUMED_REQUESTS(). Reported-by: Jan Beulich <jbeulich@suse.com> Fixes: 6fac592cca60 ("xen: update ring.h") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20220530113459.20124-1-jgross@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31net/ipv6: Expand and rename accept_unsolicited_na to accept_untracked_naArun Ajith S
RFC 9131 changes default behaviour of handling RX of NA messages when the corresponding entry is absent in the neighbour cache. The current implementation is limited to accept just unsolicited NAs. However, the RFC is more generic where it also accepts solicited NAs. Both types should result in adding a STALE entry for this case. Expand accept_untracked_na behaviour to also accept solicited NAs to be compliant with the RFC and rename the sysctl knob to accept_untracked_na. Fixes: f9a2fb73318e ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131") Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31bonding: show NS IPv6 targets in proc master infoHangbin Liu
When adding bond new parameter ns_targets. I forgot to print this in bond master proc info. After updating, the bond master info will look like: ARP IP target/s (n.n.n.n form): 192.168.1.254 NS IPv6 target/s (XX::XX form): 2022::1, 2022::2 Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reported-by: Li Liang <liali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220530062639.37179-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-30net: phy: at803x: disable WOL at probeViorel Suman
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch "at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose. The problem here is that the values of these two bits are different after hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will set WAKE_MAGIC flag, even if WOL function is not enabled by calling "at803x_set_wol" function. The patch disables WOL function on probe thus the behavior is consistent. Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/20220527084935.235274-1-viorel.suman@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-30net: ipv4: Avoid bounds check warninghuhai
Fix the following build warning when CONFIG_IPV6 is not set: In function ‘fortify_memcpy_chk’, inlined from ‘tcp_md5_do_add’ at net/ipv4/tcp_ipv4.c:1210:2: ./include/linux/fortify-string.h:328:4: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: huhai <huhai@kylinos.cn> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220526101213.2392980-1-zhanggenjian@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-30RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]Uwe Kleine-König
Without this change arch/riscv/kernel/elf_kexec.c fails to compile once commit 233c1e6c319c ("kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]") is also contained in the tree. This currently happens in next-20220527. Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c. This is safe to do on top of the riscv change even without the change to arch_kexec_apply_relocations. Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file") Looks-good-to: liaochang (A) <liaochang1@huawei.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-05-30Merge tag 'for-5.19/fbdev-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and updates from Helge Deller: "A buch of small fixes and cleanups, including: - vesafb: Fix a use-after-free due early fb_info cleanup - clcdfb: Fix refcount leak in clcdfb_of_vram_setup - hyperv_fb: Allow resolutions with size > 64 MB for Gen1 - pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() - omapfb: Prevent compiler warning regarding hwa742_update_window_async()" * tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Add prototype for hwa742_update_window_async() video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup video: fbdev: radeon: Fix spelling typo in comment video: fbdev: xen: remove setting of 'transp' parameter video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() video: fbdev: omapfb: simplify the return expression of nec_8048_connect() video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data() video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
2022-05-30Merge tag 'for-5.19/parisc-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: "Minor cleanups and code optimizations, e.g.: - improvements in assembly statements in the tmpalias code path - added some additionals compile time checks - drop some unneccesary assembler DMA syncs" * tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT parisc: Optimize tmpalias function calls parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels parisc: Fix wrong comment for shr macro parisc: Prevent ldil() to sign-extend into upper 32 bits parisc: Don't hardcode assembler bit definitions in tmpalias code parisc: Don't enforce DMA completion order in cache flushes parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
2022-05-30Merge tag 'pm-5.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update the ARM cpufreq drivers and fix up the CPPC cpufreq driver after recent changes, update the OPP code and PM documentation and add power sequences support to the system reboot and power off code. Specifics: - Add Tegra234 cpufreq support (Sumit Gupta) - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing, Rex-BC Chen, and Jia-Wei Chang) - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin, Pierre Gondois) - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana) - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel) - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski) - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter) - Cleanups (Krzysztof Kozlowski, and Viresh Kumar) - Add Out of Band mode description to the intel-speed-select utility documentation (Srinivas Pandruvada) - Add power sequences support to the system reboot and power off code and make related platform-specific changes for multiple platforms (Dmitry Osipenko, Geert Uytterhoeven)" * tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits) cpufreq: CPPC: Fix unused-function warning cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE Documentation: admin-guide: PM: Add Out of Band mode kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() ...
2022-05-30Merge tag 'thermal-5.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional thermal control update from Rafael Wysocki: "Add Meteor Lake PCI device ID to the int340x thermal control driver (Sumeet Pawnikar)" * tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Add Meteor Lake PCI device ID
2022-05-30Merge tag 'acpi-5.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These add some new device IDs, update a few drivers (processor, battery, backlight) and clean up code in a few places. Specifics: - Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar) - Rearrange find_child_checks() to simplify code (Rafael Wysocki) - Use memremap() to map the UCSI mailbox that is always in main memory and drop acpi_release_memory() that has no more users (Heikki Krogerus, Dan Carpenter) - Make max_cstate/nocst/bm_check_disable processor module parameters visible in sysfs (Yajun Deng) - Fix typo in the CPPC driver (Julia Lawall) - Make the ACPI battery driver show the "not-charging" status by default unless "charging" or "full" is directly indicated (Werner Sembach) - Improve the PM notifier in the ACPI backlight driver (Zhang Rui) - Clean up some white space in the ACPI code (Ian Cowan)" * tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe ACPI: DPTF: Support Meteor Lake ACPI: CPPC: fix typo in comment ACPI: video: improve PM notifer callback ACPI: clean up white space in a few places for consistency ACPI: glue: Rearrange find_child_checks() ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs ACPI: battery: Make "not-charging" the default on no charging or full info ACPI: OSL: Remove the helper for deactivating memory region usb: typec: ucsi: acpi: Map the mailbox with memremap()
2022-05-30Merge tag 'ovl-update-5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: - Support idmapped layers in overlayfs (Christian Brauner) - Add a fix to exportfs that is relevant to open_by_handle_at(2) as well - Introduce new lookup helpers that allow passing mnt_userns into inode_permission() * tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: support idmapped layers ovl: handle idmappings in ovl_xattr_{g,s}et() ovl: handle idmappings in layer open helpers ovl: handle idmappings in ovl_permission() ovl: use ovl_copy_{real,upper}attr() wrappers ovl: store lower path in ovl_inode ovl: handle idmappings for layer lookup ovl: handle idmappings for layer fileattrs ovl: use ovl_path_getxattr() wrapper ovl: use ovl_lookup_upper() wrapper ovl: use ovl_do_notify_change() wrapper ovl: pass layer mnt to ovl_open_realfile() ovl: pass ofs to setattr operations ovl: handle idmappings in creation operations ovl: add ovl_upper_mnt_userns() wrapper ovl: pass ofs to creation operations ovl: use wrappers to all vfs_*xattr() calls exportfs: support idmapped mounts fs: add two trivial lookup helpers
2022-05-30Merge tag 'mips_5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Cleanups and fixes" * tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits) MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem() MIPS: Kconfig: Fix indentation and add endif comment MIPS: bmips: Fix compiler warning observed on W=1 build MIPS: Rewrite `csum_tcpudp_nofold' in plain C mips: setup: use strscpy to replace strlcpy MIPS: Octeon: add SNIC10E board MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo. MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards. MIPS: Ingenic: Add PWM nodes for X1830. MIPS: Octeon: fix typo in comment MIPS: loongson32: Kconfig: Remove extra space MIPS: Sibyte: remove unnecessary return variable MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation selftests/ftrace: Save kprobe_events to test log MIPS: tools: no need to initialise statics to 0 MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon MIPS: VR41xx: Drop redundant spinlock initialization MIPS: smp: optimization for flush_tlb_mm when exiting ...
2022-05-30Merge tag 'm68knommu-for-v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "A collection of changes to add elf-fdpic loader support for m68k. Also a collection of various fixes. They include typo corrections, undefined symbol compilation fixes, removal of the ISA_DMA_API support and removal of unused code. Summary: - correctly set up ZERO_PAGE pointer - drop ISA_DMA_API support - fix comment typos - fixes for undefined symbols - remove unused code and variables - elf-fdpic loader support for m68k" * tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 68000 CPU link with no platform selected m68k: removed unused "mach_get_ss" m68knommu: fix undefined reference to `mach_get_rtc_pll' m68knommu: fix undefined reference to `_init_sp' m68knommu: allow elf_fdpic loader to be selected m68knommu: add definitions to support elf_fdpic program loader m68knommu: implement minimal regset support m68knommu: use asm-generic/mmu.h for nommu setups m68k: fix typos in comments m68k: coldfire: drop ISA_DMA_API support m68knommu: set ZERO_PAGE() to the allocated zeroed page
2022-05-30Merge branches 'acpi-battery', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
Merge ACPI battery and backlight driver update and miscellaneous cleanup for 5.19-rc1: - Make the ACPI battery driver show the "not-charging" status by default unless "charging" or "full" is directly indicated (Werner Sembach). - Improve the PM notifier in the ACPI backlight driver (Zhang Rui). - Clean up some white space in the ACPI code (Ian Cowan). * acpi-battery: ACPI: battery: Make "not-charging" the default on no charging or full info * acpi-video: ACPI: video: improve PM notifer callback * acpi-misc: ACPI: clean up white space in a few places for consistency
2022-05-30Merge branches 'acpi-glue', 'acpi-osl', 'acpi-processor' and 'acpi-cppc'Rafael J. Wysocki
Merge general ACPI cleanups and processor support updates for 5.19-rc1: - Rearrange find_child_checks() to simplify code (Rafael Wysocki). - Use memremap() to map the UCSI mailbox that is always in main memory and drop acpi_release_memory() that has no more users (Heikki Krogerus, Dan Carpenter). - Make max_cstate/nocst/bm_check_disable processor module parameters visible in sysfs (Yajun Deng). - Fix typo in the CPPC driver (Julia Lawall). * acpi-glue: ACPI: glue: Rearrange find_child_checks() * acpi-osl: usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe ACPI: OSL: Remove the helper for deactivating memory region usb: typec: ucsi: acpi: Map the mailbox with memremap() * acpi-processor: ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs * acpi-cppc: ACPI: CPPC: fix typo in comment
2022-05-30usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probeDan Carpenter
The devm_memremap() function never returns NULL. It returns error pointers. Fixes: cdc3d2abf438 ("usb: typec: ucsi: acpi: Map the mailbox with memremap()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-30parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNTHelge Deller
Those old syscalls aren't exported via our syscall table, so just drop them. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-30Merge branch 'pm-sysoff'Rafael J. Wysocki
Merge system power off handling rework from Dmitry Osipenko for 5.19-rc1. This introduces a mechanism allowing power sequences to be used for powering off the system and makes related changes in platform-specific code for multiple platforms. * pm-sysoff: (29 commits) kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() arm64: Use do_kernel_power_off() riscv: Use do_kernel_power_off() csky: Use do_kernel_power_off() ...
2022-05-30Merge branch 'pm-docs'Rafael J. Wysocki
Merge PM documentation update for 5.19-rc1. * pm-docs: Documentation: admin-guide: PM: Add Out of Band mode
2022-05-30Merge branch 'pm-opp'Rafael J. Wysocki
Merge OPP (Operating Performance Points) changes for 5.19-rc1: - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana). - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel). - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski). - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter). - Cleanups (Krzysztof Kozlowski, and Viresh Kumar). * pm-opp: opp: Reorder definition of ceil/floor helpers opp: Add apis to retrieve opps with interconnect bandwidth dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM opp: use list iterator only inside the loop opp: replace usage of found with dedicated list iterator variable PM: opp: simplify with dev_err_probe() OPP: call of_node_put() on error path in _bandwidth_supported()
2022-05-30cpufreq: CPPC: Fix unused-function warningPierre Gondois
Building the cppc_cpufreq driver with for arm64 with CONFIG_ENERGY_MODEL=n triggers the following warnings: drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used [-Werror=unused-function] 550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz, | ^~~~~~~~~~~~~~~~~ drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used [-Werror=unused-function] 481 | static int cppc_get_cpu_power(struct device *cpu_dev, | ^~~~~~~~~~~~~~~~~~ Move the Energy Model related functions into specific guards. This allows to fix the warning and prevent doing extra work when the Energy Model is not present. Fixes: 740fcdc2c20e ("cpufreq: CPPC: Register EM based on efficiency class information") Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-30cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIEZheng Bin
If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails: drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’: drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’? cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em; ^~~~~~~~~~~~~~~~~~~ cpufreq_driver Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE to fix this. Fixes: 740fcdc2c20e ("cpufreq: CPPC: Register EM based on efficiency class information") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-30wifi: rtw88: add a work to correct atomic scheduling warning of ::set_timPing-Ke Shih
The set_tim is supposed to be atomic, but we should download beacon context to firmware with a mutex lock. To avoid warning, do the thing in another work. BUG: scheduling while atomic: swapper/1/0/0x00000700 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.18.0-rc7-00703-g33b5ee09a0c1 #4 Hardware name: Pine64 RK3566 Quartz64-A Board (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x14/0x60 dump_stack_lvl+0x60/0x78 dump_stack+0x14/0x2c __schedule_bug+0x5c/0x70 __schedule+0x5c4/0x630 schedule+0x44/0xb0 schedule_preempt_disabled+0xc/0x14 __mutex_lock.constprop.0+0x538/0x56c __mutex_lock_slowpath+0x10/0x20 mutex_lock+0x54/0x60 rtw_ops_set_tim+0x20/0x40 __sta_info_recalc_tim+0x150/0x250 sta_info_recalc_tim+0x10/0x20 invoke_tx_handlers_early+0x4e4/0x5c0 ieee80211_tx+0x78/0x110 ieee80211_xmit+0x94/0xc0 __ieee80211_subif_start_xmit+0x818/0xd20 ieee80211_subif_start_xmit+0x44/0x2d0 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 br_dev_queue_push_xmit+0x94/0x174 br_forward_finish+0x90/0xa0 __br_forward+0xc0/0x13c br_forward+0x108/0x134 br_dev_xmit+0x1cc/0x3a4 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 arp_xmit+0x6c/0x7c arp_send_dst+0x8c/0xc0 arp_solicit+0xd4/0x1e0 neigh_probe+0x58/0xa0 neigh_timer_handler+0x27c/0x380 call_timer_fn.constprop.0+0x20/0x80 __run_timers.part.0+0x230/0x280 run_timer_softirq+0x38/0x70 _stext+0x104/0x278 __irq_exit_rcu+0xa4/0xdc irq_exit_rcu+0xc/0x14 el1_interrupt+0x34/0x50 el1h_64_irq_handler+0x14/0x20 el1h_64_irq+0x64/0x68 arch_cpu_idle+0x14/0x20 do_idle+0x208/0x290 cpu_startup_entry+0x20/0x30 secondary_start_kernel+0x130/0x144 __secondary_switched+0x54/0x58 Fixes: f2217968ffda ("rtw88: Add update beacon flow for AP mode") Reported-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220526051251.281905-1-pkshih@realtek.com
2022-05-30wifi: iwlwifi: pcie: rename CAUSE macroJohannes Berg
At least mips64 has ist own CAUSE macro, so rename ours to IWL_CAUSE to fix build issues. Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: c1918196427b ("iwlwifi: pcie: simplify MSI-X cause mapping") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
2022-05-30wifi: libertas: use variable-size data in assoc req/resp cmdJohannes Berg
The firmware has a 512 limit here, but we use less, so gcc starts complaining about it: drivers/net/wireless/marvell/libertas/cfg.c:1198:63: warning: array subscript ‘struct cmd_ds_802_11_associate_response[0]’ is partly outside array bounds of ‘unsigned char[203]’ [-Warray-bounds] 1198 | "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), | ^~ Since we size the command and response buffer per our needs and not per the firmware maximum, change to a variable size data array and put the 512 only into a comment. In the end, that's actually what the code always wanted, and it simplifies the code that used to subtract the fixed size buffer size in two places. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220523180200.115fa27fbece.Ie66d874b047e7afad63900aa2df70f031711147e@changeid
2022-05-30Merge branch 'guilt/xfs-5.19-larp-cleanups' into xfs-5.19-for-nextDave Chinner
This series contains a two key cleanups for the new LARP code. Most of it is refactoring and tweaking the code that creates kernel log messages about enabling and disabling features -- we should be warning about LARP being turned on once per mount, instead of once per insmod cycle; we shouldn't be spamming the logs so aggressively about turning *off* log incompat features. The second part of the series refactors the LARP code responsible for getting (and releasing) permission to use xattr log items. The implementation code doesn't belong in xfs_log.c, and calls to logging functions don't belong in libxfs -- they really should be done by the VFS implementation functions before they start calling into libraries. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-30Merge branch 'guilt/xfs-5.19-recovery-buf-cancel' into xfs-5.19-for-nextDave Chinner
As part of solving the memory leaks and UAF problems in the new LARP code, kmemleak also reported that log recovery will leak the table used to hash buffer cancellations if the recovery fails. Fix this problem by creating alloc/free helpers that initialize and free the hashtable contents correctly. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-30xfs: fix xfs_ifree() error handling to not leak perag refBrian Foster
For some reason commit 9a5280b312e2e ("xfs: reorder iunlink remove operation in xfs_ifree") replaced a jump to the exit path in the event of an xfs_difree() error with a direct return, which skips releasing the perag reference acquired at the top of the function. Restore the original code to drop the reference on error. Fixes: 9a5280b312e2e ("xfs: reorder iunlink remove operation in xfs_ifree") Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-29Merge tag 'dmaengine-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...
2022-05-29Merge tag 'trace-tools-v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing tool updates from Steven Rostedt: - Various clean ups and fixes to rtla (Real Time Linux Analysis) * tag 'trace-tools-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rtla: Remove procps-ng dependency rtla: Fix __set_sched_attr error message rtla: Minor grammar fix for rtla README rtla: Don't overwrite existing directory mode rtla: Avoid record NULL pointer dereference rtla/Makefile: Properly handle dependencies
2022-05-29Merge tag 'trace-v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The majority of the changes are for fixes and clean ups. Notable changes: - Rework trace event triggers code to be easier to interact with. - Support for embedding bootconfig with the kernel (as suppose to having it embedded in initram). This is useful for embedded boards without initram disks. - Speed up boot by parallelizing the creation of tracefs files. - Allow absolute ring buffer timestamps handle timestamps that use more than 59 bits. - Added new tracing clock "TAI" (International Atomic Time) - Have weak functions show up in available_filter_function list as: __ftrace_invalid_address___<invalid-offset> instead of using the name of the function before it" * tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits) ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function tracing: Fix comments for event_trigger_separate_filter() x86/traceponit: Fix comment about irq vector tracepoints x86,tracing: Remove unused headers ftrace: Clean up hash direct_functions on register failures tracing: Fix comments of create_filter() tracing: Disable kcov on trace_preemptirq.c tracing: Initialize integer variable to prevent garbage return value ftrace: Fix typo in comment ftrace: Remove return value of ftrace_arch_modify_*() tracing: Cleanup code by removing init "char *name" tracing: Change "char *" string form to "char []" tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ tracing/timerlat: Print stacktrace in the IRQ handler if needed tracing/timerlat: Notify IRQ new max latency only if stop tracing is set kprobes: Fix build errors with CONFIG_KRETPROBES=n tracing: Fix return value of trace_pid_write() tracing: Fix potential double free in create_var_ref() tracing: Use strim() to remove whitespace instead of doing it manually ftrace: Deal with error return code of the ftrace_process_locs() function ...
2022-05-29Merge tag 'perf-tools-for-v5.19-2022-05-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add BPF based off-CPU profiling - Improvements for system wide recording, specially for Intel PT - Improve DWARF unwinding on arm64 - Support Arm CoreSight trace data disassembly in 'perf script' python - Fix build with new libbpf version, related to supporting older versions of distro released libbpf packages - Fix event syntax error caused by ExtSel in the JSON events infra - Use stdio interface if slang is not supported in 'perf c2c' - Add 'perf test' checking for perf stat CSV output - Sync the msr-index.h copy with the kernel sources * tag 'perf-tools-for-v5.19-2022-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (38 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf scripts python: Support Arm CoreSight trace data disassembly perf scripting python: Expose dso and map information perf jevents: Fix event syntax error caused by ExtSel perf tools arm64: Add support for VG register perf unwind arm64: Decouple Libunwind register names from Perf perf unwind: Use dynamic register set for DWARF unwind perf tools arm64: Copy perf_regs.h from the kernel perf unwind arm64: Use perf's copy of kernel headers perf c2c: Use stdio interface if slang is not supported perf test: Add a basic offcpu profiling test perf record: Add cgroup support for off-cpu profiling perf record: Handle argument change in sched_switch perf record: Implement basic filtering for off-cpu perf record: Enable off-cpu analysis with BPF perf report: Do not extend sample type of bpf-output event perf test: Add checking for perf stat CSV output. perf tools: Allow system-wide events to keep their own threads perf tools: Allow system-wide events to keep their own CPUs libperf evsel: Add comments for booleans ...
generated by cgit (git 2.34.1) at 2025-09-20 12:07:02 +0000