| Age | Commit message (Collapse) | Author |
|---|
|
Only two locations in i2c-hid are using the standard dev_dbg() APIs.
The rest are all using the custom i2c_hid_dbg(), which in turn uses
dev_dbg().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Instead of implementing a custom form of dynamic debugging we can use
the standard debugging APIs. If the kernel is built with
CONFIG_DYNAMIC_DEBUG this will be more discoverable and featureful.
Also the previous module parameter "debug" is read-only so it can't
actually be enabled.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- Four potential NULL pointers dereferences (Bastien Nocera, Enrik
Berkhan, Jiasheng Jiang and Roderick Colenbrander)
- Allow Wacom devices in bootloader mode to be flashed (Jason Gerecke)
- Some assorted devices quirks (José Expósito and Terry Junge)
* tag 'for-linus-2022122101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: sony: Fix unused function warning
HID: plantronics: Additional PIDs for double volume key presses quirk
HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
HID: Ignore HP Envy x360 eu0009nv stylus battery
HID: wacom: Ensure bootloader PID is usable in hidraw mode
HID: amd_sfh: Add missing check for dma_alloc_coherent
HID: playstation: fix free of uninialized pointer for DS4 in Bluetooth.
HID: mcp2221: don't connect hidraw
HID: logitech-hidpp: Guard FF init code against non-USB devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- A regression at V4L2 core breaking string controls
- Build warning fixes on sun6i drivers when building with clang
* tag 'media/v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: sun6i-isp: params: Unregister pending buffer on cleanup
media: sun6i-isp: params: Fix incorrect indentation
media: sun6i-isp: capture: Fix uninitialized variable use
media: sun6i-isp: proc: Declare subdev ops as static
media: sun6i-isp: proc: Error out on invalid port to fix warning
media: sun6i-isp: proc: Fix return code handling in stream off path
media: sun8i-a83t-mipi-csi2: Clarify return code handling in stream off path
media: sun6i-mipi-csi2: Clarify return code handling in stream off path
media: sun6i-csi: capture: Remove useless ret initialization
media: sun6i-csi: bridge: Error out on invalid port to fix warning
media: v4l2-ctrls-api.c: add back dropped ctrl->is_new = 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes across the board, mostly improvements and cleanups"
* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
pwm: pca9685: Convert to i2c's .probe_new()
pwm: sun4i: Propagate errors in .get_state() to the caller
pwm: Handle .get_state() failures
pwm: sprd: Propagate errors in .get_state() to the caller
pwm: rockchip: Propagate errors in .get_state() to the caller
pwm: mtk-disp: Propagate errors in .get_state() to the caller
pwm: imx27: Propagate errors in .get_state() to the caller
pwm: cros-ec: Propagate errors in .get_state() to the caller
pwm: crc: Propagate errors in .get_state() to the caller
leds: qcom-lpg: Propagate errors in .get_state() to the caller
drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
pwm/tracing: Also record trace events for failed API calls
pwm: Make .get_state() callback return an error code
pwm: pxa: Enable for MMP platform
pwm: pxa: Add reference manual link and limitations
pwm: pxa: Use abrupt shutdown mode
pwm: pxa: Remove clk enable/disable from pxa_pwm_config
pwm: pxa: Set duty cycle to 0 when disabling PWM
pwm: pxa: Remove pxa_pwm_enable/disable
pwm: mediatek: Add support for MT7986
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones:
"Convert a bunch of I2C class drivers over to .probe_new()"
* tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: tosa: Convert to i2c's .probe_new()
backlight: lv5207lp: Convert to i2c's .probe_new()
backlight: lp855x: Convert to i2c's .probe_new()
backlight: lm3639: Convert to i2c's .probe_new()
backlight: lm3630a: Convert to i2c's .probe_new()
backlight: bd6107: Convert to i2c's .probe_new()
backlight: arcxcnn: Convert to i2c's .probe_new()
backlight: adp8870: Convert to i2c's .probe_new()
backlight: adp8860: Convert to i2c's .probe_new()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
|
|
The m68 hand-written assembler version of strcmp() has always been
broken: it returns the difference between the first non-matching byte
done as a 8-bit subtraction.
That is _almost_ right, but is broken for the overflow case. The
strcmp() function should indeed return the sign of the difference
between the first byte that differs, but the subtraction needs to be
done in a wider type than 'char'. Otherwise the ordering isn't actually
stable.
This went unnoticed for basically forever, because nobody ever cares
about non-US-ASCII orderings in the kernel (in fact, most users only
care about "exact match or not"), so overflows don't really happen in
practice, even if it was very very wrong.
But that mostly unnoticeable bug becomes very noticeable by the recent
change to make 'char' be unsigned in the kernel across all architectures
(commit 3bc753c06dd0: "kbuild: treat char as always unsigned"). Because
the code not only did the subtraction in the wrong type width, it also
used 'char' to then make the compiler expand the result from an 8-bit
difference to the 'int' return value.
So now with an unsigned char that incorrect arithmetic width was then
not even sign-expanded, and always returned just a positive integer.
We could re-instate the old broken code by just turning the 'char' into
'signed char' as has been done elsewhere where people depended on the
signedness of 'char', but since the whole function was broken to begin
with, and we have a non-broken default fallback implementation, let's
just remove this broken function entirely.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20221221145332.GA2399037@roeck-us.net/
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter and can.
Current release - regressions:
- bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func
- rxrpc:
- fix security setting propagation
- fix null-deref in rxrpc_unuse_local()
- fix switched parameters in peer tracing
Current release - new code bugs:
- rxrpc:
- fix I/O thread startup getting skipped
- fix locking issues in rxrpc_put_peer_locked()
- fix I/O thread stop
- fix uninitialised variable in rxperf server
- fix the return value of rxrpc_new_incoming_call()
- microchip: vcap: fix initialization of value and mask
- nfp: fix unaligned io read of capabilities word
Previous releases - regressions:
- stop in-kernel socket users from corrupting socket's task_frag
- stream: purge sk_error_queue in sk_stream_kill_queues()
- openvswitch: fix flow lookup to use unmasked key
- dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()
- devlink:
- hold region lock when flushing snapshots
- protect devlink dump by the instance lock
Previous releases - always broken:
- bpf:
- prevent leak of lsm program after failed attach
- resolve fext program type when checking map compatibility
- skbuff: account for tail adjustment during pull operations
- macsec: fix net device access prior to holding a lock
- bonding: switch back when high prio link up
- netfilter: flowtable: really fix NAT IPv6 offload
- enetc: avoid buffer leaks on xdp_do_redirect() failure
- unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
- dsa: microchip: remove IRQF_TRIGGER_FALLING in
request_threaded_irq"
* tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
net: fec: check the return value of build_skb()
net: simplify sk_page_frag
Treewide: Stop corrupting socket's task_frag
net: Introduce sk_use_task_frag in struct sock.
mctp: Remove device type check at unregister
net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
can: flexcan: avoid unbalanced pm_runtime_enable warning
Documentation: devlink: add missing toc entry for etas_es58x devlink doc
mctp: serial: Fix starting value for frame check sequence
nfp: fix unaligned io read of capabilities word
net: stream: purge sk_error_queue in sk_stream_kill_queues()
myri10ge: Fix an error handling path in myri10ge_probe()
net: microchip: vcap: Fix initialization of value and mask
rxrpc: Fix the return value of rxrpc_new_incoming_call()
rxrpc: rxperf: Fix uninitialised variable
rxrpc: Fix I/O thread stop
rxrpc: Fix switched parameters in peer tracing
rxrpc: Fix locking issues in rxrpc_put_peer_locked()
rxrpc: Fix I/O thread startup getting skipped
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid cleanup from Christian Brauner:
"This moves the ima specific vfs{g,u}id_t comparison helpers out of the
header and into the one file in ima where they are used.
We shouldn't incentivize people to use them by placing them into the
header. As discussed and suggested by Linus in [1] let's just define
them locally in the one file in ima where they are used"
Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com [1]
* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
mnt_idmapping: move ima-only helpers to ima
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"Two remaining changes that are now possible after you merged a few
other trees:
- #include <asm/archrandom.h> can be removed from random.h now,
making the direct use of the arch_random_* API more of a private
implementation detail between the archs and random.c, rather than
something for general consumers.
- Two additional uses of prandom_u32_max() snuck in during the
initial phase of pulls, so these have been converted to
get_random_u32_below(), and now the deprecated prandom_u32_max()
alias -- which was just a wrapper around get_random_u32_below() --
can be removed.
In addition, there is one fix:
- Check efi_rt_services_supported() before attempting to use an EFI
runtime function.
This affected EFI systems that disable runtime services yet still
boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
well systems where EFI runtime services have been forcibly
disabled, such as on PREEMPT_RT.
On those machines, a very early and hard to diagnose crash would
happen, preventing boot"
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove prandom_u32_max()
efi: random: fix NULL-deref when refreshing seed
random: do not include <asm/archrandom.h> from random.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This fixes a lockdep false positive in synchronize_rcu() that can
otherwise occur during early boot.
The fix simply avoids invoking lockdep if the scheduler has not yet
been initialized, that is, during that portion of boot when interrupts
are disabled"
* tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Don't assert interrupts enabled too early in boot
|
|
The build_skb might return a null pointer but there is no check on the
return value in the fec_enet_rx_queue(). So a null pointer dereference
might occur. To avoid this, we check the return value of build_skb. If
the return value is a null pointer, the driver will recycle the page and
update the statistic of ndev. Then jump to rx_processing_done to clear
the status flags of the BD so that the hardware can recycle the BD.
Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single change to use the safer strscpy() instead of strncpy()
when setting up the cmdline"
* tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: use strscpy() to instead of strncpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX/License additions from Greg KH:
"Here are two small updates for LICENSES and some kernel files that add
the Copyleft-next license and use it in a SPDX tag as a dual-license
for some kernel files.
These have been discussed thoroughly in public on the linux-spdx
mailing list, and have the needed acks on them, as well as having been
in linux-next with no reported issues for quite some time"
* tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
testing: use the copyleft-next-0.3.1 SPDX tag
LICENSES: Add the copyleft-next-0.3.1 license
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"This is mostly a treewide clean-up from Krzysztof. There's also a
couple of fixes and things that fell thru the cracks.
I must say this has been a nice merge window without bindings dumped
in at the last minute introducing warnings.
Summary:
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node"
* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drop redundant part of title (manual)
dt-bindings: clock: drop redundant part of title
dt-bindings: drop redundant part of title (beginning)
dt-bindings: drop redundant part of title (end, part three)
dt-bindings: drop redundant part of title (end, part two)
dt-bindings: drop redundant part of title (end)
dt-bindings: clock: st,stm32mp1-rcc: add proper title
dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
dt-bindings: drop redundant part of title of shared bindings
dt-bindings: watchdog: gpio: Convert bindings to YAML
dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
dt-bindings: imx6q-pcie: Handle various PD configurations
dt-bindings: imx6q-pcie: Handle various clock configurations
dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
dt-bindings: vendor-prefixes: sort entries alphabetically
dt-bindings: usb: tegra-xusb: Remove path references
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"There is one noteable patch, which allows the parisc kernel to use the
same MADV_xxx constants as the other architectures going forward. With
that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
others) which is different. To prevent an ABI breakage, a wrapper is
included which translates old MADV values to the new ones, so existing
userspace isn't affected. Reason for that patch is, that some
applications wrongly used the standard MADV_xxx values even on some
non-x86 platforms and as such those programs failed to run correctly
on parisc (examples are qemu-user, tor browser and boringssl).
Then the kgdb console and the LED code received some fixes, and some
0-day warnings are now gone. Finally, the very last compile warning
which was visible during a kernel build is now fixed too (in the vDSO
code).
The majority of the patches are tagged for stable series and in
summary this patchset is quite small and drops more code than it adds:
Fixes:
- Fix potential null-ptr-deref in start_task()
- Fix kgdb console on serial port
- Add missing FORCE prerequisites in Makefile
- Drop PMD_SHIFT from calculation in pgtable.h
Enhancements:
- Implement a wrapper to align madvise() MADV_* constants with other
architectures
- If machine supports running MPE/XL, show the MPE model string
Cleanups:
- Drop duplicate kgdb console code
- Indenting fixes in setup_cmdline()"
* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Show MPE/iX model string at bootup
parisc: Add missing FORCE prerequisites in Makefile
parisc: Move pdc_result struct to firmware.c
parisc: Drop locking in pdc console code
parisc: Drop duplicate kgdb_pdc console
parisc: Fix locking in pdc_iodc_print() firmware call
parisc: Drop PMD_SHIFT from calculation in pgtable.h
parisc: Align parisc MADV_XXX constants with all other architectures
parisc: led: Fix potential null-ptr-deref in start_task()
parisc: Fix inconsistent indenting in setup_cmdline()
|
|
Compiling this driver without setting "CONFIG_SONY_FF" generates the
following warning:
drivers/hid/hid-sony.c:2358:20: warning: unused function
'sony_send_output_report' [-Wunused-function]
static inline void sony_send_output_report(struct sony_sc *sc)
^
1 warning generated.
Add the missing preprocessor check to fix it.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.
Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)
Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.
Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.
Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.
This fix is similar to/based on commit 40d5bb87377a ("HID: multitouch:
enable multi-input as a quirk for some devices").
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825
Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Battery status is reported for the HP Envy x360 eu0009nv stylus even
though it does not have battery.
Prevent it from always reporting the battery as low (1%).
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823
Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are only three fairly simple patches.
The #include change to linux/swab.h addresses a userspace build issue,
and the change to the mmio tracing logic helps provide more useful
traces"
* tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info
include/uapi/linux/swab: Fix potentially missing __always_inline
|
|
Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.
This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add check for the return value of the dma_alloc_coherent since
it may return NULL pointer if allocation fails.
Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220024921.21992-1-jiasheng@iscas.ac.cn
|
|
Convert the final two users of prandom_u32_max() that slipped in during
6.2-rc1 to use get_random_u32_below().
Then, with no more users left, we can finally remove the deprecated
function.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Do not try to refresh the RNG seed in case the firmware does not support
setting variables.
This is specifically needed to prevent a NULL-pointer dereference on the
Lenovo X13s with some firmware revisions, or more generally, whenever
the runtime services have been disabled (e.g. efi=noruntime or with
PREEMPT_RT).
Fixes: e7b813b32a42 ("efi: random: refresh non-volatile random seed when RNG is initialized")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-12-19
The first patch is by Vincent Mailhol and adds the etas_es58x
devlink documentation to the index.
Haibo Chen's patch for the flexcan driver fixes a unbalanced
pm_runtime_enable warning.
The last patch is by me, targets the kvaser_usb driver and fixes
an error occurring with gcc-13.
* tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
can: flexcan: avoid unbalanced pm_runtime_enable warning
Documentation: devlink: add missing toc entry for etas_es58x devlink doc
====================
Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Benjamin Coddington says:
====================
Stop corrupting socket's task_frag
The networking code uses flags in sk_allocation to determine if it can use
current->task_frag, however in-kernel users of sockets may stop setting
sk_allocation when they convert to the preferred memalloc_nofs_save/restore,
as SUNRPC has done in commit a1231fda7e94 ("SUNRPC: Set memalloc_nofs_save()
on all rpciod/xprtiod jobs").
This will cause corruption in current->task_frag when recursing into the
network layer for those subsystems during page fault or reclaim. The
corruption is difficult to diagnose because stack traces may not contain the
offending subsystem at all. The corruption is unlikely to show up in
testing because it requires memory pressure, and so subsystems that
convert to memalloc_nofs_save/restore are likely to continue to run into
this issue.
Previous reports and proposed fixes:
https://lore.kernel.org/netdev/96a18bd00cbc6cb554603cc0d6ef1c551965b078.1663762494.git.gnault@redhat.com/
https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
https://lore.kernel.org/linux-nfs/de6d99321d1dcaa2ad456b92b3680aa77c07a747.1665401788.git.gnault@redhat.com/
Guilluame Nault has done all of the hard work tracking this problem down and
finding the best fix for this issue. I'm just taking a turn posting another
fix.
====================
Link: https://lore.kernel.org/r/cover.1671194454.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that in-kernel socket users that may recurse during reclaim have benn
converted to sk_use_task_frag = false, we can have sk_page_frag() simply
check that value.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sockets that can be used while recursing into memory reclaim, like
those used by network block devices and file systems, mustn't use
current->task_frag: if the current process is already using it, then
the inner memory reclaim call would corrupt the task_frag structure.
To avoid this, sk_page_frag() uses ->sk_allocation to detect sockets
that mustn't use current->task_frag, assuming that those used during
memory reclaim had their allocation constraints reflected in
->sk_allocation.
This unfortunately doesn't cover all cases: in an attempt to remove all
usage of GFP_NOFS and GFP_NOIO, sunrpc stopped setting these flags in
->sk_allocation, and used memalloc_nofs critical sections instead.
This breaks the sk_page_frag() heuristic since the allocation
constraints are now stored in current->flags, which sk_page_frag()
can't read without risking triggering a cache miss and slowing down
TCP's fast path.
This patch creates a new field in struct sock, named sk_use_task_frag,
which sockets with memory reclaim constraints can set to false if they
can't safely use current->task_frag. In such cases, sk_page_frag() now
always returns the socket's page_frag (->sk_frag). The first user is
sunrpc, which needs to avoid using current->task_frag but can keep
->sk_allocation set to GFP_KERNEL otherwise.
Eventually, it might be possible to simplify sk_page_frag() by only
testing ->sk_use_task_frag and avoid relying on the ->sk_allocation
heuristic entirely (assuming other sockets will set ->sk_use_task_frag
according to their constraints in the future).
The new ->sk_use_task_frag field is placed in a hole in struct sock and
belongs to a cache line shared with ->sk_shutdown. Therefore it should
be hot and shouldn't have negative performance impacts on TCP's fast
path (sk_shutdown is tested just before the while() loop in
tcp_sendmsg_locked()).
Link: https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The unregister check could be incorrectly triggered if a netdev
changes its type after register. That is possible for a tun device
using TUNSETLINK ioctl, resulting in mctp unregister failing
and the netdev unregister waiting forever.
This was encountered by https://github.com/openthread/openthread/issues/8523
Neither check at register or unregister is required. They were added in
an attempt to track down mctp_ptr being set unexpectedly, which should
not happen in normal operation.
Fixes: 7b1871af75f3 ("mctp: Warn if pointer is set for a wrong dev type")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221215054933.2403401-1-matt@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ swithes used interrupts for detecting the phy link up and down.
During registering the interrupt handler, it used IRQF_TRIGGER_FALLING
flag. But this flag has to be retrieved from device tree instead of hard
coding in the driver, so removing the flag.
Fixes: ff319a644829 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common")
Reported-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
of Mediatek SoC specific fixes, all trivial"
* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: tegra: fix CPU_BIG_ENDIAN dependencies
ARM: disallow pre-ARMv5 builds with ld.lld
ARM: pxa: fix building with clang
MAINTAINERS: add related dts to IXP4xx
ARM: dts: spear: drop 0x from unit address
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
soc: mediatek: pm-domains: Fix the power glitch issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
buildtar: fix tarballs with EFI_ZBOOT enabled
modpost: Include '.text.*' in TEXT_SECTIONS
padata: Mark padata_work_init() as __ref
kbuild: ensure Make >= 3.82 is used
kbuild: refactor the prerequisites of the modpost rule
kbuild: change module.order to list *.o instead of *.ko
kbuild: use .NOTINTERMEDIATE for future GNU Make versions
kconfig: refactor Makefile to reduce process forks
kbuild: add read-file macro
kbuild: do not sort after reading modules.order
kbuild: add test-{ge,gt,le,lt} macros
Documentation: raise minimum supported version of binutils to 2.25
kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
kbuild: Port silent mode detection to future gnu make.
init/version.c: remove #include <generated/utsrelease.h>
firmware_loader: remove #include <generated/utsrelease.h>
modpost: Mark uuid_le type to be suitable only for MEI
kbuild: add ability to make source rpm buildable using koji
kbuild: warn objects shared among multiple modules
...
|
|
Pull zstd updates from Nick Terrell:
"Update the kernel to upstream zstd v1.5.2 [0]. Specifically to the tag
v1.5.2-kernel [1] which includes several cherrypicked fixes for the
kernel on top of v1.5.2.
Excepting the MAINTAINERS change, all the changes in this can be
generated by:
git clone https://github.com/facebook/zstd
cd zstd/contrib/linux-kernel
git checkout v1.5.2-kernel
LINUX=/path/to/linux/repo make import
Additionally, this includes several minor typo fixes, which have all
been fixed upstream so they are maintained on the next import"
Link: https://github.com/facebook/zstd/releases/tag/v1.5.2 [0]
Link: https://github.com/facebook/zstd/tree/v1.5.2-kernel [1]
Link: https://lore.kernel.org/lkml/20221024202606.404049-1-nickrterrell@gmail.com/
Link: https://github.com/torvalds/linux/commit/637a642f5ca5e850186bb64ac75ebb0f124b458d
* tag 'zstd-linus-v6.2' of https://github.com/terrelln/linux:
zstd: import usptream v1.5.2
zstd: Move zstd-common module exports to zstd_common_module.c
lib: zstd: Fix comment typo
lib: zstd: fix repeated words in comments
MAINTAINERS: git://github -> https://github.com for terrelln
lib: zstd: clean up double word in comment.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes
PM domains: enable isolation before resetting power
* tag 'v6.1-soc-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pm-domains: Fix the power glitch issue
Link: https://lore.kernel.org/r/29c8b913-53cf-096f-fe44-832ceaeac116@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes
MT8183: fix phandle for GPU clock
MT8195 demo: fix size of secmon reserved memory area
* tag 'v6.1-dts64-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
Link: https://lore.kernel.org/r/af4c45ce-a150-438f-dab4-e47b120c32c4@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
My previous patch to prevent BPMP from being enabled on big
endian kernels caused a build regression:
WARNING: unmet direct dependencies detected for TEGRA_BPMP
Depends on [n]: ARCH_TEGRA [=y] && TEGRA_HSP_MBOX [=y] && TEGRA_IVC [=y] && !CPU_BIG_ENDIAN [=y]
Selected by [y]:
- ARCH_TEGRA_186_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
- ARCH_TEGRA_194_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
- ARCH_TEGRA_234_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
Add even more such dependencies for the SoC types that use
the BPMP driver.
Fixes: 4ddb1bf1a837 ("tegra: mark BPMP driver as little-endian only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221215165336.1781080-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
lld cannot build for ARMv4/v4T targets because it inserts 'blx' instructions
that are unsupported there:
ld.lld: warning: lld uses blx instruction, no object with architecture supporting feature detected
Add a Kconfig time dependency to prevent those targets from being
selected in randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/llvm/llvm-project/issues/50764
Link: https://github.com/ClangBuiltLinux/linux/issues/964
Link: https://lore.kernel.org/r/20221215162635.3750763-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The integrated assembler in clang does not understand the xscale
specific mra/mar instructions:
arch/arm/mach-pxa/pxa27x.c:136:15: error: unsupported architectural extension: xscale
asm volatile(".arch_extension xscale\n\t"
arch/arm/mach-pxa/pxa27x.c:136:40: error: invalid instruction, did you mean: mcr, mla, mrc, mrs, msr?
mra r2, r3, acc0
Since these are coprocessor features, the same can be expressed using
mrrc/mcrr, so use that for builds with IAS.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221215162529.3659187-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
get_maintainer.pl currently give no maintainer on all IXP4xx DTS files.
Add them to the set of files handled by IXP4xx maintainers.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221005105734.3513581-1-clabbe@baylibre.com
Link: https://lore.kernel.org/r/20221214204223.177807-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
By coding style, unit address should not start with 0x.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20221210113347.63939-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd updates from Chuck Lever:
"This contains a number of crasher fixes that were not ready for the
initial pull request last week.
In particular, Jeff's patch attempts to address reference count
underflows in NFSD's filecache, which have been very difficult to
track down because there is no reliable reproducer.
Common failure modes:
https://bugzilla.kernel.org/show_bug.cgi?id=216691#c11
https://bugzilla.kernel.org/show_bug.cgi?id=216674#c6
https://bugzilla.redhat.com/show_bug.cgi?id=2138605
The race windows were found by inspection and the clean-ups appear
sensible and pass regression testing, so we include them here in the
hope that they address the problem. However we remain vigilant because
we don't have 100% certainty yet that the problem is fully addressed.
Summary:
- Address numerous reports of refcount underflows in NFSD's filecache
- Address a UAF in callback setup error handling
- Address a UAF during server-to-server copy"
* tag 'nfsd-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix use-after-free in __nfs42_ssc_open()
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
nfsd: rework refcounting in filecache
|
|
Some (mostly 64-bit machines) machines allow to run MPE/iX and report the MPE
model string via firmware call. Enhance the pdc_model_sysmodel() function to
report that model string.
Note that some 32-bit machines like the B160L wrongly report success for the
firmware call, so include a check to prevent showing wrong info.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Debian's gcc-13 [1] throws the following error in
kvaser_usb_hydra_cmd_size():
[1] gcc version 13.0.0 20221214 (experimental) [master r13-4693-g512098a3316] (Debian 13-20221214-1)
| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:502:65: error:
| array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array
| bounds of ‘unsigned char[32]’ [-Werror=array-bounds=]
| 502 | ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len);
kvaser_usb_hydra_cmd_size() returns the size of given command. It
depends on the command number (cmd->header.cmd_no). For extended
commands (cmd->header.cmd_no == CMD_EXTENDED) the above shown code is
executed.
Help gcc to recognize that this code path is not taken in all cases,
by calling kvaser_usb_hydra_cmd_size() directly after assigning the
command number.
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Cc: Jimmy Assarsson <extja@kvaser.com>
Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/all/20221219110104.1073881-1-mkl@pengutronix.de
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When do suspend/resume, meet the following warning message:
[ 30.028336] flexcan 425b0000.can: Unbalanced pm_runtime_enable!
Balance the pm_runtime_force_suspend() and pm_runtime_force_resume().
Fixes: 8cb53b485f18 ("can: flexcan: add auto stop mode for IMX93 to support wakeup")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20221213094351.3023858-1-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
