summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-23clk: sunxi-ng: Allow the CCU core to be built as a moduleSamuel Holland
Like the individual CCU drivers, it can be beneficial for memory consumption of cross-platform configurations to only load the CCU core on the relevant platform. For example, a generic arm64 kernel sees the following improvement when building the CCU core and drivers as modules: before: text data bss dec hex filename 13882360 5251670 360800 19494830 12977ae vmlinux after: text data bss dec hex filename 13734787 5086442 360800 19182029 124b1cd vmlinux So the result is a 390KB total reduction in kernel image size. The one early clock provider (sun5i) requires the core to be built in. Now that loading the MMC driver will trigger loading the CCU core, the MMC timing mode functions do not need a compile-time fallback. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-5-samuel@sholland.org
2021-11-23clk: sunxi-ng: Convert early providers to platform driversSamuel Holland
The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-22clk: samsung: exynos850: Register clocks earlySam Protsenko
Some clocks must be registered before init calls. For example MCT clock (from CMU_PERI) is needed for MCT timer driver, which is registered with TIMER_OF_DECLARE(). By the time we get to core_initcall() used for clk-exynos850 platform driver init, it's already too late. Inability to get "mct" clock in MCT driver leads to kernel panic, as functions registered with *_OF_DECLARE() can't do deferred calls. MCT timer driver can't be fixed either, as it's acting as a clock source and it's essential to register it in start_kernel() -> time_init(). Let's register CMU_PERI clocks early, using CLK_OF_DECLARE(). CMU_TOP generates clocks needed for CMU_PERI, but it's already registered early. While at it, let's cleanup the code a bit, by extracting everything related to CMU initialization and registration to the separate function. Similar issue was discussed at [1] and addressed in commit 1f7db7bbf031 ("clk: renesas: cpg-mssr: Add early clock support"), as well as in drivers/clk/mediatek/clk-mt2712.c. [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20180829132954.64862-2-chris.brandt@renesas.com/ Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211122144206.23134-1-semen.protsenko@linaro.org
2021-11-22clk: imx8mp: Fix the parent clk of the audio_root_clkHui Wang
Having the parent of the audio_root_clk set to ipg_root in the clk-imx8mp.c, there is a hang happening when the audiomix IP regs are accessed. Switch parent to audio_ahb. And we could also refer to the section "5.1.4 System Clocks" of the IMX8MPRM.pdf, the parent clk of CCGR101 (Audiomix) is the AUDIO_AHB_CLK_ROOT. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20211109125657.63485-2-hui.wang@canonical.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-11-22clk: imx8mp: Remove IPG_AUDIO_ROOT from imx8mp-clock.hHui Wang
Since the commit b24e288d5063 ("clk: imx: Remove the audio ipg clock from imx8mp") removes the non-existing IPG_AUDIO_ROOT from the clk-imx8mp.c, and this definition is not used by anywhere, let us removed it in the imx8mp-clock.h as well. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20211109125657.63485-1-hui.wang@canonical.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-11-22clk: imx8mn: Fix imx8mn_clko1_selsAdam Ford
When attempting to use sys_pll1_80m as the parent for clko1, the system hangs. This is due to the fact that the source select for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which doesn't yet exist. According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly references an osc_27m which does not exist, nor does an entry for source select bits 010b. Fix both by inserting a dummy clock into the missing space in the table and renaming the incorrectly name clock with dummy. Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20211117133202.775633-1-aford173@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-11-22clk: imx: Use div64_ul instead of do_divChangcheng Deng
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20211118080634.165275-1-deng.changcheng@zte.com.cn Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-11-22clk: imx: imx8ulp: set suppress_bind_attrs to truePeng Fan
The clock driver is registered as platform devices and it is possible to reloading the driver at runtime. But actually the clocks should never be removed to make system work, attempting to bind again would result in a crash, because almost all devices depends on clock to function well. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20211022131513.17381-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-11-22clk: samsung: exynos850: Keep some crucial clocks runningSam Protsenko
Some clocks shouldn't be automatically disabled in clk_disable_unused(), otherwise kernel hangs. Mark those clocks with: - CLK_IS_CRITICAL flag, when there won't be any consumers for that clock, but system can't function when it's gated - CLK_IGNORE_UNUSED flag, when consumer driver will be probably added later That makes it possible to run the kernel without passing the "clk_ignore_unused" param. Next clocks were modified: - "gout_dpu_cmu_dpu_pclk": CLK_IGNORE_UNUSED Will be enabled later in DSIM driver (Display Serial Interface Master). - "gout_gpio_peri_pclk": CLK_IGNORE_UNUSED "gout_gpio_cmgp_pclk": CLK_IGNORE_UNUSED "gout_gpio_hsi_pclk": CLK_IGNORE_UNUSED Should be probably enabled in corresponding GPIO driver later, or made CLK_IS_CRITICAL. "gout_gpio_peri_clk" is actually used by LEDs on Exynos850-based dev board, so kernel hangs if this clock is not running. Other clocks were marked as "ignore unused" to prevent similar issues for other use cases or boards that might be added later. - "gout_cci_aclk": CLK_IS_CRITICAL CCI (Cache Coherent Interconnect): obviously is critical. - "gout_gic_clk": CLK_IS_CRITICAL GIC (Generic Interrupt Controller): obviously is critical. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211121232741.6967-7-semen.protsenko@linaro.org
2021-11-22clk: samsung: exynos850: Implement CMU_CMGP domainSam Protsenko
CMU_CMGP clock domain provides clocks for CMGP IP-core (Common GPIO). CMGP module encapsulates next blocks: - 8 GPIO lines - 1 GPADC - 2 USI blocks, each can be configured to provide one of UART/SPI/HSI2C serial interfaces Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211121232741.6967-5-semen.protsenko@linaro.org
2021-11-22dt-bindings: clock: Add bindings for Exynos850 CMU_CMGPSam Protsenko
CMU_CMGP generates USI and ADC clocks for BLK_ALIVE. In particular USI clocks are needed for HSI2C_3 and HSI2C_4 instances. Add clock indices and bindings documentation for CMU_CMGP domain. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211121232741.6967-4-semen.protsenko@linaro.org
2021-11-22clk: samsung: exynos850: Implement CMU_APM domainSam Protsenko
CMU_APM clock domain provides clocks for APM IP-core (Active Power Management). According to Exynos850 TRM, CMU_APM generates I3C, Mailbox, Speedy, Timer, WDT, RTC and PMU clocks for BLK_ALIVE. This patch adds next clocks: - bus clocks in CMU_TOP needed for CMU_APM - all internal CMU_APM clocks - leaf clocks for I3C, Speedy and RTC IP-cores - bus clocks for CMU_CMGP and CMU_CHUB CMU_APM doesn't belong to Power Domains, but platform driver is used for its registration to keep its bus clock always running. Otherwise rtc-s3c driver disables that clock and system freezes. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211121232741.6967-3-semen.protsenko@linaro.org
2021-11-22dt-bindings: clock: Add bindings for Exynos850 CMU_APMSam Protsenko
CMU_APM generates clocks for APM IP-core (Active Power Management). In particular it generates RTC clocks, which are needed to enable rtc-s3c driver on Exynos850 SoC. Add clock indices and binding documentation for CMU_APM. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211121232741.6967-2-semen.protsenko@linaro.org
2021-11-22clk: sunxi-ng: Allow drivers to be built as modulesSamuel Holland
While it is useful to build all of the CCU drivers at once, only 1-3 of them will be loaded at a time, or possibly none of them if the kernel is booted on a non-sunxi platform. These CCU drivers are relatively large; 32-bit drivers have 30-50k of data each, while the 64-bit ones are 50-75k due to the increased pointer overhead. About half of that data comes from relocations. Let's allow the user to build these drivers as modules so only the necessary data is loaded. As a first step, convert the CCUs that are already platform drivers. When the drivers are built as modules, normally the file name becomes the module name. However, the current file names are inconsistent with the <platform>-<peripheral> name used everywhere else: the devicetree bindings, the platform driver names, and the Kconfig symbols. Use Makfile logic to rename the modules so they follow the usual pattern. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-3-samuel@sholland.org
2021-11-22clk: sunxi-ng: Export symbols used by CCU driversSamuel Holland
For the individual CCU drivers to be built as modules, the ops structs, helper functions, and callback registration functions must be exported. These symbols are intended for use only by the adjacent CCU drivers, so export them into the SUNXI_CCU namespace. of_sunxi_ccu_probe is not exported because it is only used by built-in OF clock providers. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-2-samuel@sholland.org
2021-11-20clk: samsung: Update CPU clk registrationWill McVicker
Convert the remaining exynos clock drivers to use samsung_clk_register_cpu() or if possible use samsung_cmu_register_one(). With this we can now make exynos_register_cpu_clock() a static function so that future CPU clock registration changes will use the samsung common clock driver. The main benefit of this change is that it standardizes the CPU clock registration for the samsung clock drivers. Link: https://lore.kernel.org/r/20211015190515.3760577-1-willmcvicker@google.com Signed-off-by: Will McVicker <willmcvicker@google.com> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> [snawrocki@kernel.org: Fixed build break in clk-exynos4.c, clk-exynos5250.c] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-11-19clk: samsung: Remove meaningless __init and extern from header filesSylwester Nawrocki
Remove useless __init atrribute and unneeded extern qualifier in function declarations in header files. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211015151425.29743-1-s.nawrocki@samsung.com
2021-11-19clk: samsung: remove __clk_lookup() usageMarek Szyprowski
__clk_lookup() interface is obsolete, so remove it from the Samsung clock drivers. This has been achieved by getting rid of custom _get_rate() helper and replacing it with clk_hw_get_rate(). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211018125456.8292-2-m.szyprowski@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-11-19dt-bindings: clock: samsung: add IDs for some core clocksMarek Szyprowski
Add IDs for some core clocks referenced during the boot process. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20211018125456.8292-1-m.szyprowski@samsung.com Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-11-19dt-bindings: clock: renesas,cpg-mssr: Document r8a779f0Yoshihiro Shimoda
Add binding documentation for the R-Car S4-8 (R8A779F0) Clock Pulse Generator. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211116074130.107554-7-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: cpg-mssr: propagate return value of_genpd_add_provider_simple()Lad Prabhakar
of_genpd_add_provider_simple() might fail, this patch makes sure we check the return value of of_genpd_add_provider_simple() by propagating the return value to the caller of cpg_mssr_add_clk_domain(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: cpg-mssr: Check return value of pm_genpd_init()Lad Prabhakar
Make sure we check the return value of pm_genpd_init() which might fail. Also add a devres action to remove the power-domain in-case the probe callback fails further down in the code flow. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple()Lad Prabhakar
of_genpd_add_provider_simple() might fail, this patch makes sure we check the return value of of_genpd_add_provider_simple() by propagating the return value to the caller of rzg2l_cpg_add_clk_domain(). Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rzg2l: Check return value of pm_genpd_init()Lad Prabhakar
Make sure we check the return value of pm_genpd_init() which might fail. Also add a devres action to remove the power-domain in-case the probe callback fails further down in the code flow. Fixes: ef3c613ccd68a ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: r9a07g044: Add RSPI clock and reset entriesLad Prabhakar
Add RSPI{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20211117002601.17971-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIVBiju Das
Core clock "I" is sourced from CPG_PL1_DDIV divider as per HW manual Rev.1.00. This patch adds clock divider table "dtable_1_8" and switches to DEF_DIV for "I" clock. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211112081003.15453-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rzg2l: Add CPG_PL1_DDIV macroBiju Das
Core clock "I" is sourced from CPG_PL1_DDIV which controls CPU frequency. Define CPG_PL1_DDIV, so that we can register it as a clock divider in later patch. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211112081003.15453-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19mmc: renesas_sdhi: Parse DT for SDnHWolfram Sang
If there is a SDnH clock provided in DT, let's use it instead of relying on the fallback. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20211110191610.5664-21-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19mmc: renesas_sdhi: Use dev_err_probe when getting clock failsWolfram Sang
This is to improve deferred probe in this driver and to keep consistent with an up-to-date handling of a soon to be added second clock. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20211110191610.5664-20-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rcar-gen3: Remove outdated SD_SKIP_FIRSTWolfram Sang
We handle it differently meanwhile. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-7-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rcar-gen3: Switch to new SD clock handlingWolfram Sang
The old SD handling code was huge and could not handle all the details which showed up on R-Car Gen3 SoCs meanwhile. It is time to switch to another design. Have SDnH a separate clock, use the existing divider clocks and move the errata handling from the clock driver to the SDHI driver where it belongs. This patch removes the old SD handling code and switch to the new one. This updates the SDHI driver at the same time. Because the SDHI driver can only communicate with the clock driver via clk_set_rate(), I don't see an alternative to this flag-day-approach, so we cross subsystems here. The patch sadly looks messy for the CPG lib, but it is basically a huge chunk of code removed and smaller chunks added. It looks much better when you just view the resulting source file. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Link: https://lore.kernel.org/r/20211110191610.5664-6-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19mmc: renesas_sdhi: Flag non-standard SDnH handling for V3MWolfram Sang
V3M handles SDnH differently than other Gen3 SoCs, so let's add a separate entry for that. This will allow better SDnH handling in the future. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20211110191610.5664-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: r8a779a0: Add SDnH clock to V3UWolfram Sang
Currently a pass-through clock but we will make it a real divider clock in the next patches. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rcar-gen3: Add SDnH clockWolfram Sang
Currently a pass-through clock but we will make it a real divider clock in the next patches. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: rcar-gen3: Add dummy SDnH clockWolfram Sang
Currently, SDnH is handled together with SDn. This caused lots of problems, so we want SDnH as a separate clock. Introduce a dummy SDnH type here which creates a fixed-factor clock with factor 1. That allows us to convert the per-SoC CPG drivers while keeping the old behaviour for now. A later patch then will add the proper functionality. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15clk: renesas: r9a07g044: Add OSTM clock and reset entriesBiju Das
Add OSTM{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211110082019.28554-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15clk: renesas: r9a07g044: Rename CLK_PLL2_DIV16 and CLK_PLL2_DIV20 macrosBiju Das
Rename the macros CLK_PLL2_DIV16->CLK_PLL2_DIV2_8 and CLK_PLL2_DIV20->CLK_PLL2_DIV2_10 to match the clock tree mentioned in the hardware manual(Rev.1.00 Sep, 2021). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211110082019.28554-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15clk: renesas: r9a07g044: Add WDT clock and reset entriesBiju Das
Add WDT{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20211104160858.15550-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15clk: renesas: r9a07g044: Add clock and reset entry for SCI1Lad Prabhakar
Add clock and reset entry for SCI1 interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20211103160537.32253-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15clk: renesas: rzg2l: Add missing kerneldoc for resetsGeert Uytterhoeven
make W=1: drivers/clk/renesas/rzg2l-cpg.c:95: warning: Function parameter or member 'num_resets' not described in 'rzg2l_cpg_priv' Add the missing kerneldoc for fields in struct rzg2l_cpg_priv and struct rzg2l_cpg_info related to Module Resets. Fixes: c3e67ad6f5a2c698 ("dt-bindings: clock: r9a07g044-cpg: Update clock/reset definitions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/39c2c5fd4232b6620a4a56dba4e2b0d61476ee36.1634646869.git.geert+renesas@glider.be
2021-11-14Linux 5.16-rc1v5.16-rc1Linus Torvalds
2021-11-14kconfig: Add support for -Wimplicit-fallthroughGustavo A. R. Silva
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236 Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs cleanups from Darrick Wong: "The most 'exciting' aspect of this branch is that the xfsprogs maintainer and I have worked through the last of the code discrepancies between kernel and userspace libxfs such that there are no code differences between the two except for #includes. IOWs, diff suffices to demonstrate that the userspace tools behave the same as the kernel, and kernel-only bits are clearly marked in the /kernel/ source code instead of just the userspace source. Summary: - Clean up open-coded swap() calls. - A little bit of #ifdef golf to complete the reunification of the kernel and userspace libxfs source code" * tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: sync xfs_btree_split macros with userspace libxfs xfs: #ifdef out perag code for userspace xfs: use swap() to make dabtree code cleaner
2021-11-14Merge tag 'for-5.16/parisc-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc fixes from Helge Deller: "Fix a build error in stracktrace.c, fix resolving of addresses to function names in backtraces, fix single-stepping in assembly code and flush userspace pte's when using set_pte_at()" * tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/entry: fix trace test in syscall exit path parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page parisc: Fix implicit declaration of function '__kernel_text_address' parisc: Fix backtrace to always include init funtion names
2021-11-14Merge tag 'sh-for-5.16' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
2021-11-14Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
2021-11-14Merge tag 'devicetree-fixes-for-5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Two fixes due to DT node name changes on Arm, Ltd. boards - Treewide rename of Ingenic CGU headers - Update ST email addresses - Remove Netlogic DT bindings - Dropping few more cases of redundant 'maxItems' in schemas - Convert toshiba,tc358767 bridge binding to schema * tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: watchdog: sunxi: fix error in schema bindings: media: venus: Drop redundant maxItems for power-domain-names dt-bindings: Remove Netlogic bindings clk: versatile: clk-icst: Ensure clock names are unique of: Support using 'mask' in making device bus id dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml dt-bindings: media: Update maintainers for st,stm32-cec.yaml dt-bindings: mfd: timers: Update maintainers for st,stm32-timers dt-bindings: timer: Update maintainers for st,stm32-timer dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14Merge tag 'timers-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-14Merge tag 'locking-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 static call update from Thomas Gleixner: "A single fix for static calls to make the trampoline patching more robust by placing explicit signature bytes after the call trampoline to prevent patching random other jumps like the CFI jump table entries" * tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call,x86: Robustify trampoline patching
generated by cgit (git 2.34.1) at 2025-09-23 19:22:38 +0000