summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-27sh: fixed cmpxchg gRB versionGiuseppe CAVALLARO
This patch fixes a bug within the cmpxchg GRB version. A problem was notices while running some tests to stress the priority inheritance, for example pi_stress (http://rt.wiki.kernel.org/index.php/PI_Mutex_Test). Also, without this patch, after applying the latest work to consolidate atomic_cmpxchg() definitions (commit: 8c0b8139c87cfe8b95c6e763b4ca3190aa9b1ad0) the Kernel doesn't boot at all. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-27sh: kmemleak support.Chris Smith
Enables support for kmemleak on sh. Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-27sh: Optimize runtime disabling of trapped I/O.Paul Mundt
Presently trapped I/O is only registered if it's not explicitly disabled for the platforms that select it openly. From the fault path this runs through an address lookup before figuring out that nothing matches and falls back through the error path, but we can forego the lookup completely by testing if it's been explicitly disabled. This provides a measurable speedup for things like qemu that rely on runtime disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-27perf trace: Add -i option for choosing input fileHitoshi Mitake
perf trace lacks -i option for choosing input file. This patch adds it to perf trace. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264167929-6741-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf symbols: Use the right variable to check for kallsyms in the cacheArnaldo Carvalho de Melo
Probably this wasn't noticed when testing this on my parisc machine because I must have copied manually to its cache the vmlinux file used in the x86_64 machine, now that I tried looking on a x86-32 machine with a fresh cache, kernel symbols weren't being resolved even with the right kallsyms copy on its cache, duh. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264178102-4203-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf symbols: Fix inverted logic for showing kallsyms as the source of symbolsArnaldo Carvalho de Melo
Only if we parsed /proc/kallsyms (or a copy found in the buildid cache) we should set the dso long name to "[kernel.kallsyms]". Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264178102-4203-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf top: Handle PERF_RECORD_{FORK,EXIT} eventsArnaldo Carvalho de Melo
As noticed by Mike, symbols in new tasks were not being processed as we weren't processing these events. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264086284-1431-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf top: Fix sample countingArnaldo Carvalho de Melo
Broken since "5b2bb75 perf top: Support userspace symbols too". Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264086284-1431-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Revert "x86: ucode-amd: Load ucode-patches once ..." x86: Disable HPET MSI on ATI SB700/SB800 x86: Set hotpluggable nodes in nodes_possible_map
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build.
2010-01-27x86, UV: Fix RTC latency bug by reading replicated cachelinesDimitri Sivanich
For SGI UV node controllers (HUB) rev 2.0 or greater, use replicated cachelines to read the RTC timer. This optimization allows faster simulataneous reads from a given socket. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100122154140.GB4975@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf: Ignore perf.data.oldAmerigo Wang
Tell git to ignore this file. Signed-off-by: WANG Cong <amwang@redhat.com> LKML-Reference: <20100125051052.3999.28082.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27Merge branch 'iommu/fixes' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
2010-01-27perf report: Fix segmentation fault when running with '-g none'Yong Wang
Segmentation fault occurs when running perf report with '-g none'. Reported-by: Austin Zhang <austin.zhang@intel.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27UBI: fix volume creation input checkingMika Westerberg
Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@vger.kernel.org
2010-01-27Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent
2010-01-27[S390] fix single stepped svcs with TRACE_IRQFLAGS=yMartin Schwidefsky
If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] zcrypt: Do not remove coprocessor for error 8/72Felix Beck
In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] sclp_vt220: set initial terminal window sizeHendrik Brueckner
When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] use set_current_state in sigsuspendMartin Schwidefsky
Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] irqflags: add missing types.h includeHeiko Carstens
Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] dasd: fix possible NULL pointer errorsStefan Haberland
Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-26x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID ↵Russ Anderson
drivers. Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Dean Nelson <dnelson@redhat.com> LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-27perf: Reimplement frequency driven samplingPeter Zijlstra
There was a bug in the old period code that caused intel_pmu_enable_all() or native_write_msr_safe() to show up quite high in the profiles. In staring at that code it made my head hurt, so I rewrote it in a hopefully simpler fashion. Its now fully symetric between tick and overflow driven adjustments and uses less data to boot. The only complication is that it basically wants to do a u128 division. The code approximates that in a rather simple truncate until it fits fashion, taking care to balance the terms while truncating. This version does not generate that sampling artefact. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27lockdep: Fix check_usage_backwards() error messageOleg Nesterov
Lockdep has found the real bug, but the output doesn't look right to me: > ========================================================= > [ INFO: possible irq lock inversion dependency detected ] > 2.6.33-rc5 #77 > --------------------------------------------------------- > emacs/1609 just changed the state of lock: > (&(&tty->ctrl_lock)->rlock){+.....}, at: [<ffffffff8127c648>] tty_fasync+0xe8/0x190 > but this lock took another, HARDIRQ-unsafe lock in the past: > (&(&sighand->siglock)->rlock){-.....} "HARDIRQ-unsafe" and "this lock took another" looks wrong, afaics. > ... key at: [<ffffffff81c054a4>] __key.46539+0x0/0x8 > ... acquired at: > [<ffffffff81089af6>] __lock_acquire+0x1056/0x15a0 > [<ffffffff8108a0df>] lock_acquire+0x9f/0x120 > [<ffffffff81423012>] _raw_spin_lock_irqsave+0x52/0x90 > [<ffffffff8127c1be>] __proc_set_tty+0x3e/0x150 > [<ffffffff8127e01d>] tty_open+0x51d/0x5e0 The stack-trace shows that this lock (ctrl_lock) was taken under ->siglock (which is hopefully irq-safe). This is a clear typo in check_usage_backwards() where we tell the print a fancy routine we're forwards. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100126181641.GA10460@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-26starfire: clean up properly if firmware loading failsBen Hutchings
netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in <http://bugzilla.kernel.org/show_bug.cgi?id=15091>, and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reported-by: Michael Moffatt <michael@moffatt.org.nz> Tested-by: Michael Moffatt <michael@moffatt.org.nz> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26Fix failure exit in ipathfsAl Viro
deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fix oops in fs/9p late mount failureAl Viro
if 9P ->get_sb() fails late (at root inode or root dentry allocation), we'll hit its ->kill_sb() with NULL ->s_root Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fix leak in romfs_fill_super()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26get rid of pointless checks after simple_pin_fs()Al Viro
if we'd just got success from it, vfsmount won't be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26Fix failure exits in bfs_fill_super()Al Viro
double iput(), leaks... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fix affs parse_options()Al Viro
Error handling in that sucker got broken back in 2003. If function returns 0 on failure, it's not nice to add return -EINVAL into it. Adding return 1 on other failure exits is also not a good thing (and yes, original success exits with 1 and some of failure exits with 0 are still there; so's the original logics in callers). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26Fix remount races with symlink handling in affsAl Viro
A couple of fields in affs_sb_info is used in follow_link() and symlink() for handling AFFS "absolute" symlinks. Need locking against affs_remount() updates. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26Fix a leak in affs_fill_super()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26fnctl: f_modown should call write_lock_irqsave/restoreGreg Kroah-Hartman
Commit 703625118069f9f8960d356676662d3db5a9d116 exposed that f_modown() should call write_lock_irqsave instead of just write_lock_irq so that because a caller could have a spinlock held and it would not be good to renable interrupts. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tavis Ormandy <taviso@google.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-26tracing/documentation: Cover new frame pointer semanticsMike Frysinger
Update the graph tracer examples to cover the new frame pointer semantics (in terms of passing it along). Move the HAVE_FUNCTION_GRAPH_FP_TEST docs out of the Kconfig, into the right place, and expand on the details. Signed-off-by: Mike Frysinger <vapier@gentoo.org> LKML-Reference: <1264165967-18938-1-git-send-email-vapier@gentoo.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26tracing/documentation: Fix a typo in ftrace.txtYang Hongyang
'ftrace' is no longer the name of the function tracer, to activate the function trace 'echo function > current_tracer' is to be used instead of 'echo ftrace > current_tracer'. Update the documentation to reflect the current implementation. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> LKML-Reference: <4B5D0BA8.20106@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26ring-buffer: Check for end of page in iteratorSteven Rostedt
If the iterator comes to an empty page for some reason, or if the page is emptied by a consuming read. The iterator code currently does not check if the iterator is pass the contents, and may return a false entry. This patch adds a check to the ring buffer iterator to test if the current page has been completely read and sets the iterator to the next page if necessary. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26ring-buffer: Check if ring buffer iterator has stale dataSteven Rostedt
Usually reads of the ring buffer is performed by a single task. There are two types of reads from the ring buffer. One is a consuming read which will consume the entry that was read and the next read will be the entry that follows. The other is an iterator that will let the user read the contents of the ring buffer without modifying it. When an iterator is allocated, writes to the ring buffer are disabled to protect the iterator. The problem exists when consuming reads happen while an iterator is allocated. Specifically, the kind of read that swaps out an entire page (used by splice) and replaces it with a new read. If the iterator is on the page that is swapped out, then the next read may read from this swapped out page and return garbage. This patch adds a check when reading the iterator to make sure that the iterator contents are still valid. If a consuming read has taken place, the iterator is reset. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-26NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctlyTrond Myklebust
Even if the server is crazy, we should be able to mark the stateid as being bad, to ensure it gets recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarilyTrond Myklebust
Currently, nfs4_handle_exception() will call it twice if called with an error of -NFS4ERR_STALE_CLIENTID, -NFS4ERR_STALE_STATEID or -NFS4ERR_EXPIRED. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFSv4: Don't allow posix locking against servers that don't support itTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFSv4: Ensure that the NFSv4 locking can recover from stateid errorsTrond Myklebust
In most cases, we just want to mark the lock_stateid sequence id as being uninitialised. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFS: Avoid warnings when CONFIG_NFS_V4=nDavid Howells
Avoid the following warnings when CONFIG_NFS_V4=n: fs/nfs/sysctl.c:19: warning: unused variable `nfs_set_port_max' fs/nfs/sysctl.c:18: warning: unused variable `nfs_set_port_min' by making those variables contingent on NFSv4 being configured. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFS: Make nfs_commitdata_release staticH Hartley Sweeten
The symbol nfs_commitdata_release is only used locally in this file. Make it static to prevent the following sparse warning: warning: symbol 'nfs_commitdata_release' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFS: Try to commit unstable writes in nfs_release_page()Trond Myklebust
If someone calls nfs_release_page(), we presumably already know that the page is clean, however it may be holding an unstable write. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26NFS: Fix a reference leak in nfs_wb_cancel_page()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2010-01-26firewire: core: fix use-after-free regression in FCP handlerStefan Richter
Commit db5d247a "firewire: fix use of multiple AV/C devices, allow multiple FCP listeners" introduced a regression into 2.6.33-rc3: The core freed payloads of incoming requests to FCP_Request or FCP_Response before a userspace driver accessed them. We need to copy such payloads for each registered userspace client and free the copies according to the lifetime rules of non-FCP client request resources. (This could possibly be optimized by reference counts instead of copies.) The presently only kernelspace driver which listens for FCP requests, firedtv, was not affected because it already copies FCP frames into an own buffer before returning to firewire-core's FCP handler dispatcher. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26firewire: cdev: add_descriptor documentation fixStefan Richter
struct fw_cdev_add_descriptor.length is in quadlets, not in bytes. Also remove any doubts about the endianess of descriptor data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26firewire: core: add_descriptor size checkStefan Richter
Presently, firewire-core only checks whether descriptors that are to be added by userspace drivers to the local node's config ROM do not exceed a size of 256 quadlets. However, the sum of the bare minimum ROM plus all descriptors (from firewire-core, from firewire-net, from userspace) must not exceed 256 quadlets. Otherwise, the bounds of a statically allocated buffer will be overwritten. If the kernel survives that, firewire-core will subsequently be unable to parse the local node's config ROM. (Note, userspace drivers can add descriptors only through device files of local nodes. These are usually only accessible by root, unlike device files of remote nodes which may be accessible to lesser privileged users.) Therefore add a test which takes the actual present and required ROM size into account for all descriptors of kernelspace and userspace drivers. Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
generated by cgit (git 2.34.1) at 2025-09-30 12:41:18 +0000