summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-15bnxt_en: Fix length value in dmesg log firmware error message.Michael Chan
The len value in the hwrm error message is wrong. Use the properly adjusted value in the variable len. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Improve the delay logic for firmware response.Michael Chan
The current code has 2 problems: 1. The maximum wait time is not long enough. It is about 60% of the duration specified by the firmware. It is calling usleep_range(600, 800) for every 1 msec we are supposed to wait. 2. The granularity of the delay is too coarse. Many simple firmware commands finish in 25 usec or less. We fix these 2 issues by multiplying the original 1 msec loop counter by 40 and calling usleep_range(25, 40) for each iteration. There is also a second delay loop to wait for the last DMA word to complete. This delay loop should be a very short 5 usec wait. This change results in much faster bring-up/down time: Before the patch: time ip link set p4p1 up real 0m0.120s user 0m0.001s sys 0m0.009s After the patch: time ip link set p4p1 up real 0m0.030s user 0m0.000s sys 0m0.010s Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Reduce maximum ring pages if page size is 64K.Michael Chan
The chip supports 4K/8K/64K page sizes for the rings and we try to match it to the CPU PAGE_SIZE. The current page size limits for the rings are based on 4K/8K page size. If the page size is 64K, these limits are too large. Reduce them appropriately. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Report PCIe link speed and width during driver loadAjit Khaparde
Add code to log a message during driver load indicating PCIe link speed and width. The log message will look like this: bnxt_en 0000:86:00.0 eth0: PCIe: Speed 8.0GT/s Width x8 Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPROAjit Khaparde
Add support to fetch the SFP EEPROM settings from the firmware and display it via the ethtool -m command. We support SFP+ and QSFP modules. v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings. Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Fix invalid max channel parameter in ethtool -l.Satish Baddipadige
When there is only 1 MSI-X vector or in INTA mode, tx and rx pre-set max channel parameters are shown incorrectly in ethtool -l. With only 1 vector, bnxt_get_max_rings() will return -ENOMEM. bnxt_get_channels should check this return value, and set max_rx/max_tx to 0 if it is non-zero. Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "Just the missing compat entry for the new pread/writev2" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Use compat version for preadv2 and pwritev2
2016-05-15i2c: rcar: add DMA supportNiklas Söderlund
Make it possible to transfer i2c message buffers via DMA. Start/Stop/Sending_Slave_Address and some data is still handled using the old state machine, it is sending the bulk of the data that is done via DMA. The first byte of a transmission and the last two bytes of reception are sent/received using PIO. This is needed for the HW to have access to the first byte before DMA transmit and to be able to set the STOP condition for DMA reception. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [wsa: fixed a checkpatch warning] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix mvneta/bm dependencies, from Arnd Bergmann. 2) RX completion hw bug workaround in bnxt_en, from Michael Chan. 3) Kernel pointer leak in nf_conntrack, from Linus. 4) Hoplimit route attribute limits not enforced properly, from Paolo Abeni. 5) qlcnic driver NULL deref fix from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: arm64: bpf: jit JMP_JSET_{X,K} net/route: enforce hoplimit max value nf_conntrack: avoid kernel pointer value leak in slab name drivers: net: xgene: fix register offset drivers: net: xgene: fix statistics counters race condition drivers: net: xgene: fix ununiform latency across queues drivers: net: xgene: fix sharing of irqs drivers: net: xgene: fix IPv4 forward crash xen-netback: fix extra_info handling in xenvif_tx_err() net: mvneta: bm: fix dependencies again bnxt_en: Add workaround to detect bad opaque in rx completion (part 2) bnxt_en: Add workaround to detect bad opaque in rx completion (part 1) qlcnic: potential NULL dereference in qlcnic_83xx_get_minidump_template()
2016-05-14net: switchdev: Drop EXPERIMENTAL from descriptionFlorian Fainelli
Switchdev has been around for quite a while now, putting "EXPERIMENTAL" in the description is no longer accurate, drop it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14arm64: bpf: jit JMP_JSET_{X,K}Zi Shen Lim
Original implementation commit e54bcde3d69d ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net/route: enforce hoplimit max valuePaolo Abeni
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14nf_conntrack: avoid kernel pointer value leak in slab nameLinus Torvalds
The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501faa874 ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Overlayfs fixes from Miklos, assorted fixes from me. Stable fodder of varying severity, all sat in -next for a while" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ovl: ignore permissions on underlying lookup vfs: add lookup_hash() helper vfs: rename: check backing inode being equal vfs: add vfs_select_inode() helper get_rock_ridge_filename(): handle malformed NM entries ecryptfs: fix handling of directory opening atomic_open(): fix the handling of create_error fix the copy vs. map logics in blk_rq_map_user_iov() do_splice_to(): cap the size before passing to ->splice_read()
2016-05-14Merge branch 'jani-rest' into docs-nextJonathan Corbet
Patch series from Jani Nikula: > Jon, I was hoping we could consider nudging things forward a bit in the > kernel-doc and docproc reStructuredText front already in 4.7. I know > it's a bit close to the merge window, but this should not interfere with > anything else, and some of it are just trivial cleanups that I've been > carrying around locally. > > Obviously this doesn't actually add anything that uses them yet, but I > think it would be helpful to have some common base in to ease > collaboration.
2016-05-14serial: doc: Use port->state instead of infoGeert Uytterhoeven
As of commit ebd2c8f6d2ec4012 ("serial: kill off uart_info"), the circular transmission buffer is part of struct uart_state instead of struct uart_info. Make it clear this structure is pointed to from struct uart_port. Change 'circ' to 'circ_buf' to match the structure name while we're at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14serial: doc: Always refer to tty_port->mutexGeert Uytterhoeven
Stop referring to the mutex member of the tty_port struct as 'port->mutex', as 'port' is ambiguous, and usually refers to the uart_port struct in this document. Use 'tty_port->mutex' instead, following the single existing use. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14Documentation: vm: Spelling s/paltform/platform/gGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14Documentation/memcg: update kmem limit doc as codes behaviorQiang Huang
The restriction of kmem setting is not there anymore because the accounting is enabled by default even in the cgroup v1 - see b313aeee2509 ("mm: memcontrol: enable kmem accounting for all cgroups in the legacy hierarchy"). Update docs accordingly. Signed-off-by: Qiang Huang <h.huangqiang@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14docproc: print a comment about autogeneration for rst outputJani Nikula
Leave a hint to folks which file to edit instead. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14docproc: add support for reStructuredText format via --rst optionJani Nikula
Expect reStructuredText input and have kernel-doc produce reStructuredText output with the new --rst option. Also add --docbook option for completeness. If no option is given, default to reStructuredText if the input file has ".rst" extension, DocBook otherwise. Directives for reStructuredText use .. ! instead of just !, to make them reStructuredText comments. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14docproc: abstract terminating lines at first spaceJani Nikula
Cleaner code. Also fixes a bug when F or P directives didn't in fact have space. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14docproc: abstract docproc directive detectionJani Nikula
Helps follow-up work. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14docproc: reduce unnecessary indentationJani Nikula
Improves clarity. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14docproc: add variables for subcommand and filenameJani Nikula
Improves clarity. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14kernel-doc: use rst C domain directives and references for typesJani Nikula
First, the headings for structs, enums and typedefs will be similar to functions. Second, this provides a kind of namespace for cross references. Third, and most importantly, the return and parameter types from .. c:function:: definitions will automagically become cross references to the documented types. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14kernel-doc: produce RestructuredText outputJonathan Corbet
If given the -rst flag, output will now be in RestructuredText. Various glitches to be worked out yet. In the end I decided not to use RST section headings within the kerneldoc comments. gpu.tmpl already has headings five levels deep; adding more is not going to bring clarity. This is really just Jani Nikula's asciidoc change with the serial numbers filed off. It's a hack job that doubtless needs a lot of cleaning up. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14kernel-doc: rewrite usage description, remove duplicated commentsJani Nikula
Instead of having the kernel-doc usage in both comments and in output to the user, merge them all to one here document. While at it, imrove the text and make it pretty. Give shoemaker's children some shoes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-14Merge tag 'usb-serial-4.7-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.7-rc1 These updates fixes a number of issues where resources were not properly released on probe errors. Included is also a fix for hardware flow-control disable for cp210x. Support for Moxa UPort 11x0 is added to the ti_usb_3410_5052 driver, and included are also some general code clean ups. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-14dmaengine: ioatdma: disable relaxed ordering for ioatdmaDave Jiang
ioatdma by default is in snoop mode. Relaxed ordering according to spec does not do anything in snoop mode. However, it causes hang or significant performance degrade when tested with NTB. Disabling in the driver due to some BIOS do not configure it correctly. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-14dmaengine: of_dma: approximate an average distributionNiklas Söderlund
Currently the following DT description would result in dmac0 always being tried first and dmac1 second if dmac0 was unavailable. This results in heavier use of dmac0 then of dmac1. This patch adds an approximate average distribution over the two nodes lessening the load of anyone of them. i2c6: i2c@e60b0000 { ... dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; ... }; Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-14dmaengine: core: Use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-14dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error eventPeter Ujfalusi
When the ccerr handler is called but the error registers indicate no error events we need to command eDMA to re-evaluate the errors. Otherwise we can receive flood of error interrupts. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-14i40e: fix an uninitialized variable bugDan Carpenter
We removed this initialization but it is required. Let's put it back. Fixes: 895106a577c4 ('i40e: trivial fixes') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e: Bump version from 1.5.10 to 1.5.16Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e: don't add broadcast filter for VFsMitch Williams
Now that all VSIs are configured to receive broadcasts as default, we don't need to add a filter. This eliminates an annoying but harmless error message each time VFs are created or reset. Change-ID: I4cd6339684df45b0d2722133eeb84c14fa93ea19 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e/i40evf: properly report Rx packet hashMitch Williams
This logic is inverted. If the RXHASH flag is set, then we should go ahead and call skb_set_hash. Change-ID: Ib2e30356dced1d3e939c8061ab6ad5bd94197e7c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14i40e: set context to use VSI RSS LUT for SR-IOVAshish Shah
For the SR-IOV VSIs, when the queue filtering section is valid, the RSS LUT needs to be set to use the VSI specific lookup table (otherwise it will use the PF RSS LUT table). Change-ID: Ia9377cc818078238a75c3bdeade1b593a91b3480 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Correct UDP packet header for non_tunnel-ipv6Akeem G Abodunrin
This patch corrects Rx ptype payload layer for non_tunneled ipv6. It should be layer 4 for UDP, instead of layer 3. Change-ID: I9382e4458ab3c4e58f6d2e9f195d5d4ee513805e Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: change Rx hang message into a WARN_ONCEJacob Keller
Use WARN_ONCE in order to highlight the issue, but don't display a warning every time. The user should be able to see the ethtool counter we created if necessary to see how often it is occurring. Change-ID: I40c4ea159819b64a7d33b7f5716749089791533a Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Refactor ethtool get_settingsCatherine Sullivan
Previously we were only looking at the FW supported PHY types if link was down, because we want to be more specific when link is up. This refactor changes this. When link is down, we still rely on the FW supported PHY types, but when link is up, we select the possible supported link modes from what we know about the current PHY type, and AND that with the FW supported PHY types. Change-ID: Ice5dad83f2a17932b0b8b59f07439696ad6aa013 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-14dmaengine: qcom_hidma: add support for object hierarchySinan Kaya
In order to create a relationship model between the channels and the management object, we are adding support for object hierarchy to the drivers. This patch simplifies the userspace application development. We will not have to traverse different firmware paths based on device tree or ACPI based kernels. No matter what flavor of kernel is used, objects will be represented as platform devices. The new layout is as follows: hidmam_10: hidma-mgmt@0x5A000000 { compatible = "qcom,hidma-mgmt-1.0"; ... hidma_10: hidma@0x5a010000 { compatible = "qcom,hidma-1.0"; ... } } The hidma_mgmt_init detects each instance of the hidma-mgmt-1.0 objects in device tree and calls into the channel driver to create platform devices for each child of the management object. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-14dmaengine: qcom_hidma: add debugfs hooksSinan Kaya
Add debugfs hooks for debugging the execution behavior of the DMA channel. The debugfs hooks get initialized by the probe function and uninitialized by the remove function. A stats file is created in debugfs. The stats file will show the information about each HIDMA channel as well as each asynchronous job queued and completed at a given time. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-14dmaengine: qcom_hidma: implement lower level hardware interfaceSinan Kaya
This patch implements the hardware hooks for the HIDMA channel driver. The main functions of interest are: - hidma_ll_init - hidma_ll_request - hidma_ll_queue_request - hidma_ll_hw_start OS layer calls the hidma_ll_init function during probe to set up the hardware. At this moment, the number of supported descriptors are also given. On each request, a descriptor is allocated from the free pool and filled in with the transfer parameters. Multiple requests can be queued into the hardware via the OS interface. When client is ready for requests to be executed, start method is called. Completions are delivered via callbacks via tasklet. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-13i40e: lie to the VFMitch Williams
If an untrusted VF attempts to configure promiscuous mode, log a message pointing out its naughty behavior. But then, instead of returning an error to the offender, just lie to it and say everything's OK. It will continue on its way, thinking it's in promiscuous mode, but receiving no packets except its own. Change-ID: I63369215b1720f3c531eedfc06af86ff8c0e3dc8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add vf-true-promisc-support priv flagAnjali Singhai Jain
This patch adds priv-flag knob to configure global true promisc support. With this patch the user can decide the flavor of promiscuous that the VFs will see when promiscuous mode is enabled on the interface. Since this a global setting for the whole device, the priv-flag is exposed only on the first PF of the device. The default is true promisc support is off, which means the promisc mode for the VF will be limited/defport mode. For the PF, we still will be in limited promisc unless in MFP mode irrespective of the flavor picked through this knob. Usage: On PF0 ethtool --show-priv-flags p261p1 Private flags for p261p1: MFP : off LinkPolling : off flow-director-atr : on veb-stats : off hw-atr-eviction : off vf-true-promisc-support: off to enable setting true promisc ethtool --set-priv-flags p261p1 vf-true-promisc-support on At this point if the VF is set to trust and promisc is enabled on the VF through ip link set ... promisc on The VF/VFs will be able to see ALL ingress traffic Change-Id: I8fac4b6eb1af9ca77b5376b79c50bdce5055bd94 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Implement the API function for aq_set_switch_configShannon Nelson
Add the support code for calling the AdminQ API call aq_set_switch_config Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add allmulti support for the VFAnjali Singhai Jain
This patch enables a feature to enable/disable all multicast for a trusted VF. Change-Id: I926eba7f8850c8d40f8ad7e08bbe4056bbd3985f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add support for disabling all link and change bits needed for PHY ↵Kevin Scott
interactions Add flag to tell firmware to disable link on all ports. This patch changes the bits set for telling firmware the PHY needs to be modified by driver. Without this patch, the setting will only set that mode for the current port on the device. Because the MDIO interface is common for the copper device. The command needs to set the mode for all ports. Change-ID: I8baa7da91d384291ac95b41ae1a516604f8eb67f Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 08:04:58 +0000