summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-20btrfs: fix u32 overflows when left shifting stripe_nrQu Wenruo
[BUG] David reported an ASSERT() get triggered during fio load on 8 devices with data/raid6 and metadata/raid1c3: fio --rw=randrw --randrepeat=1 --size=3000m \ --bsrange=512b-64k --bs_unaligned \ --ioengine=libaio --fsync=1024 \ --name=job0 --name=job1 \ The ASSERT() is from rbio_add_bio() of raid56.c: ASSERT(orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN); Which is checking if the target rbio is crossing the full stripe boundary. [100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622 [100.795] ------------[ cut here ]------------ [100.796] kernel BUG at fs/btrfs/raid56.c:1622! [100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124 [100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [100.802] Workqueue: writeback wb_workfn (flush-btrfs-1) [100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs] [100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246 [100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01 [100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001 [100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f [100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400 [100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000 [100.817] FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 [100.821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0 [100.824] Call Trace: [100.825] <TASK> [100.825] ? die+0x32/0x80 [100.826] ? do_trap+0x12d/0x160 [100.827] ? rbio_add_bio+0x204/0x210 [btrfs] [100.827] ? rbio_add_bio+0x204/0x210 [btrfs] [100.829] ? do_error_trap+0x90/0x130 [100.830] ? rbio_add_bio+0x204/0x210 [btrfs] [100.831] ? handle_invalid_op+0x2c/0x30 [100.833] ? rbio_add_bio+0x204/0x210 [btrfs] [100.835] ? exc_invalid_op+0x29/0x40 [100.836] ? asm_exc_invalid_op+0x16/0x20 [100.837] ? rbio_add_bio+0x204/0x210 [btrfs] [100.837] raid56_parity_write+0x64/0x270 [btrfs] [100.838] btrfs_submit_chunk+0x26e/0x800 [btrfs] [100.840] ? btrfs_bio_init+0x80/0x80 [btrfs] [100.841] ? release_pages+0x503/0x6d0 [100.842] ? folio_unlock+0x2f/0x60 [100.844] ? __folio_put+0x60/0x60 [100.845] ? btrfs_do_readpage+0xae0/0xae0 [btrfs] [100.847] btrfs_submit_bio+0x21/0x60 [btrfs] [100.847] submit_one_bio+0x6a/0xb0 [btrfs] [100.849] extent_write_cache_pages+0x395/0x680 [btrfs] [100.850] ? __extent_writepage+0x520/0x520 [btrfs] [100.851] ? mark_usage+0x190/0x190 [100.852] extent_writepages+0xdb/0x130 [btrfs] [100.853] ? extent_write_locked_range+0x480/0x480 [btrfs] [100.854] ? mark_usage+0x190/0x190 [100.854] ? attach_extent_buffer_page+0x220/0x220 [btrfs] [100.855] ? reacquire_held_locks+0x178/0x280 [100.856] ? writeback_sb_inodes+0x245/0x7f0 [100.857] do_writepages+0x102/0x2e0 [100.858] ? page_writeback_cpu_online+0x10/0x10 [100.859] ? __lock_release.isra.0+0x14a/0x4d0 [100.860] ? reacquire_held_locks+0x280/0x280 [100.861] ? __lock_acquired+0x1e9/0x3d0 [100.862] ? do_raw_spin_lock+0x1b0/0x1b0 [100.863] __writeback_single_inode+0x94/0x450 [100.864] writeback_sb_inodes+0x372/0x7f0 [100.864] ? lock_sync+0xd0/0xd0 [100.865] ? do_raw_spin_unlock+0x93/0xf0 [100.866] ? sync_inode_metadata+0xc0/0xc0 [100.867] ? rwsem_optimistic_spin+0x340/0x340 [100.868] __writeback_inodes_wb+0x70/0x130 [100.869] wb_writeback+0x2d1/0x530 [100.869] ? __writeback_inodes_wb+0x130/0x130 [100.870] ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0 [100.870] wb_do_writeback+0x3eb/0x480 [100.871] ? wb_writeback+0x530/0x530 [100.871] ? mark_lock_irq+0xcd0/0xcd0 [100.872] wb_workfn+0xe0/0x3f0< [CAUSE] Commit a97699d1d610 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce u64 division. Function btrfs_max_io_len() is to get the length to the stripe boundary. It calculates the full stripe start offset (inside the chunk) by the following code: *full_stripe_start = rounddown(*stripe_nr, nr_data_stripes(map)) << BTRFS_STRIPE_LEN_SHIFT; The calculation itself is fine, but the value returned by rounddown() is dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which returned int). Thus the result is also u32, then we do the left shift, which can overflow u32. If such overflow happens, @full_stripe_start will be a value way smaller than @offset, causing later "full_stripe_len - (offset - *full_stripe_start)" to underflow, thus make later length calculation to have no stripe boundary limit, resulting a write bio to exceed stripe boundary. There are some other locations like this, with a u32 @stripe_nr got left shift, which can lead to a similar overflow. [FIX] Fix all @stripe_nr with left shift with a type cast to u64 before the left shift. Those involved @stripe_nr or similar variables are recording the stripe number inside the chunk, which is small enough to be contained by u32, but their offset inside the chunk can not fit into u32. Thus for those specific left shifts, a type cast to u64 is necessary so this patch does not touch them and the code will be cleaned up in the future to keep the fix minimal. Reported-by: David Sterba <dsterba@suse.com> Fixes: a97699d1d610 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN") Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-20io_uring: add helpers to decode the fixed file file_ptrChristoph Hellwig
Remove all the open coded magic on slot->file_ptr by introducing two helpers that return the file pointer and the flags instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: use io_file_from_index in io_msg_grab_fileChristoph Hellwig
Use io_file_from_index instead of open coding it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: use io_file_from_index in __io_sync_cancelChristoph Hellwig
Use io_file_from_index instead of open coding it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: return REQ_F_ flags from io_file_get_flagsChristoph Hellwig
Two of the three callers want them, so return the more usual format, and shift into the FFS_ form only for the fixed file table. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: remove io_req_ffs_setChristoph Hellwig
Just checking the flag directly makes it a lot more obvious what is going on here. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: remove a confusing comment above io_file_get_flagsChristoph Hellwig
The SCM inflight mechanism has nothing to do with the fact that a file might be a regular file or not and if it supports non-blocking operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: remove the mode variable in io_file_get_flagsChristoph Hellwig
The variable is only once now, so don't bother with it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20io_uring: remove __io_file_supports_nowaitChristoph Hellwig
Now that this only checks O_NONBLOCK and FMODE_NOWAIT, the helper is complete overkilļ, and the comments are confusing bordering to wrong. Just inline the check into the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620113235.920399-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20accel/qaic: Call DRM helper function to destroy prime GEMPranjal Ramajor Asha Kanojiya
smatch warning: drivers/accel/qaic/qaic_data.c:620 qaic_free_object() error: dereferencing freed memory 'obj->import_attach' obj->import_attach is detached and freed using dma_buf_detach(). But used after free to decrease the dmabuf ref count using dma_buf_put(). drm_prime_gem_destroy() handles this issue and performs the proper clean up instead of open coding it in the driver. Fixes: ff13be830333 ("accel/qaic: Add datapath") Reported-by: Sukrut Bellary <sukrut.bellary@linux.com> Closes: https://lore.kernel.org/all/20230610021200.377452-1-sukrut.bellary@linux.com/ Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230614161528.11710-1-quic_jhugo@quicinc.com
2023-06-20reiserfs: fix blkdev_put() warning from release_journal_dev()Yu Kuai
In journal_init_dev(), if super bdev is used as 'j_dev_bd', then blkdev_get_by_dev() is called with NULL holder, otherwise, holder will be journal. However, later in release_journal_dev(), blkdev_put() is called with journal unconditionally, cause following warning: WARNING: CPU: 1 PID: 5034 at block/bdev.c:617 bd_end_claim block/bdev.c:617 [inline] WARNING: CPU: 1 PID: 5034 at block/bdev.c:617 blkdev_put+0x562/0x8a0 block/bdev.c:901 RIP: 0010:blkdev_put+0x562/0x8a0 block/bdev.c:901 Call Trace: <TASK> release_journal_dev fs/reiserfs/journal.c:2592 [inline] free_journal_ram+0x421/0x5c0 fs/reiserfs/journal.c:1896 do_journal_release fs/reiserfs/journal.c:1960 [inline] journal_release+0x276/0x630 fs/reiserfs/journal.c:1971 reiserfs_put_super+0xe4/0x5c0 fs/reiserfs/super.c:616 generic_shutdown_super+0x158/0x480 fs/super.c:499 kill_block_super+0x64/0xb0 fs/super.c:1422 deactivate_locked_super+0x98/0x160 fs/super.c:330 deactivate_super+0xb1/0xd0 fs/super.c:361 cleanup_mnt+0x2ae/0x3d0 fs/namespace.c:1247 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xadc/0x2a30 kernel/exit.c:874 do_group_exit+0xd4/0x2a0 kernel/exit.c:1024 __do_sys_exit_group kernel/exit.c:1035 [inline] __se_sys_exit_group kernel/exit.c:1033 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1033 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix this problem by passing in NULL holder in this case. Reported-by: syzbot+04625c80899f4555de39@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=04625c80899f4555de39 Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620111322.1014775-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()Yu Kuai
After commit 2736e8eeb0cc ("block: use the holder as indication for exclusive opens"), blkdev_get_by_dev() will warn if holder is NULL and mode contains 'FMODE_EXCL'. holder from blkdev_get_by_dev() from disk_scan_partitions() is always NULL, hence it should not use 'FMODE_EXCL', which is broben by the commit. For consequence, WARN_ON_ONCE() will be triggered from blkdev_get_by_dev() if user scan partitions with device opened exclusively. Fix this problem by removing 'FMODE_EXCL' from disk_scan_partitions(), as it used to be. Reported-by: syzbot+00cd27751f78817f167b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=00cd27751f78817f167b Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230618140402.7556-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20block: document the holder argument to blkdev_get_by_pathChristoph Hellwig
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620043536.707249-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20block: increment diskseq on all media change eventsDemi Marie Obenour
Currently, associating a loop device with a different file descriptor does not increment its diskseq. This allows the following race condition: 1. Program X opens a loop device 2. Program X gets the diskseq of the loop device. 3. Program X associates a file with the loop device. 4. Program X passes the loop device major, minor, and diskseq to something. 5. Program X exits. 6. Program Y detaches the file from the loop device. 7. Program Y attaches a different file to the loop device. 8. The opener finally gets around to opening the loop device and checks that the diskseq is what it expects it to be. Even though the diskseq is the expected value, the result is that the opener is accessing the wrong file. From discussions with Christoph Hellwig, it appears that disk_force_media_change() was supposed to call inc_diskseq(), but in fact it does not. Adding a Fixes: tag to indicate this. Christoph's Reported-by is because he stated that disk_force_media_change() calls inc_diskseq(), which is what led me to discover that it should but does not. Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Fixes: e6138dc12de9 ("block: add a helper to raise a media changed event") Cc: stable@vger.kernel.org # 5.15+ Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230607170837.1559-1-demi@invisiblethingslab.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20swim: fix a missing FMODE_ -> BLK_OPEN_ conversion in floppy_openChristoph Hellwig
Fix a missing conversion to the new BLK_OPEN constant in swim. Fixes: 05bdb9965305 ("block: replace fmode_t with a block-specific type for block open flags") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230620043051.707196-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-20x86/smp: Put CPUs into INIT on shutdown if possibleThomas Gleixner
Parking CPUs in a HLT loop is not completely safe vs. kexec() as HLT can resume execution due to NMI, SMI and MCE, which has the same issue as the MWAIT loop. Kicking the secondary CPUs into INIT makes this safe against NMI and SMI. A broadcast MCE will take the machine down, but a broadcast MCE which makes HLT resume and execute overwritten text, pagetables or data will end up in a disaster too. So chose the lesser of two evils and kick the secondary CPUs into INIT unless the system has installed special wakeup mechanisms which are not using INIT. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230615193330.608657211@linutronix.de
2023-06-20x86/smp: Split sending INIT IPI out into a helper functionThomas Gleixner
Putting CPUs into INIT is a safer place during kexec() to park CPUs. Split the INIT assert/deassert sequence out so it can be reused. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20230615193330.551157083@linutronix.de
2023-06-20x86/smp: Cure kexec() vs. mwait_play_dead() breakageThomas Gleixner
TLDR: It's a mess. When kexec() is executed on a system with offline CPUs, which are parked in mwait_play_dead() it can end up in a triple fault during the bootup of the kexec kernel or cause hard to diagnose data corruption. The reason is that kexec() eventually overwrites the previous kernel's text, page tables, data and stack. If it writes to the cache line which is monitored by a previously offlined CPU, MWAIT resumes execution and ends up executing the wrong text, dereferencing overwritten page tables or corrupting the kexec kernels data. Cure this by bringing the offlined CPUs out of MWAIT into HLT. Write to the monitored cache line of each offline CPU, which makes MWAIT resume execution. The written control word tells the offlined CPUs to issue HLT, which does not have the MWAIT problem. That does not help, if a stray NMI, MCE or SMI hits the offlined CPUs as those make it come out of HLT. A follow up change will put them into INIT, which protects at least against NMI and SMI. Fixes: ea53069231f9 ("x86, hotplug: Use mwait to offline a processor, fix the legacy case") Reported-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615193330.492257119@linutronix.de
2023-06-20x86/smp: Use dedicated cache-line for mwait_play_dead()Thomas Gleixner
Monitoring idletask::thread_info::flags in mwait_play_dead() has been an obvious choice as all what is needed is a cache line which is not written by other CPUs. But there is a use case where a "dead" CPU needs to be brought out of MWAIT: kexec(). This is required as kexec() can overwrite text, pagetables, stacks and the monitored cacheline of the original kernel. The latter causes MWAIT to resume execution which obviously causes havoc on the kexec kernel which results usually in triple faults. Use a dedicated per CPU storage to prepare for that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615193330.434553750@linutronix.de
2023-06-20x86/smp: Remove pointless wmb()s from native_stop_other_cpus()Thomas Gleixner
The wmb()s before sending the IPIs are not synchronizing anything. If at all then the apic IPI functions have to provide or act as appropriate barriers. Remove these cargo cult barriers which have no explanation of what they are synchronizing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615193330.378358382@linutronix.de
2023-06-20x86/smp: Dont access non-existing CPUID leafTony Battersby
stop_this_cpu() tests CPUID leaf 0x8000001f::EAX unconditionally. Intel CPUs return the content of the highest supported leaf when a non-existing leaf is read, while AMD CPUs return all zeros for unsupported leafs. So the result of the test on Intel CPUs is lottery. While harmless it's incorrect and causes the conditional wbinvd() to be issued where not required. Check whether the leaf is supported before reading it. [ tglx: Adjusted changelog ] Fixes: 08f253ec3767 ("x86/cpu: Clear SME feature flag when not in use") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/3817d810-e0f1-8ef8-0bbd-663b919ca49b@cybernetics.com Link: https://lore.kernel.org/r/20230615193330.322186388@linutronix.de
2023-06-20x86/smp: Make stop_other_cpus() more robustThomas Gleixner
Tony reported intermittent lockups on poweroff. His analysis identified the wbinvd() in stop_this_cpu() as the culprit. This was added to ensure that on SME enabled machines a kexec() does not leave any stale data in the caches when switching from encrypted to non-encrypted mode or vice versa. That wbinvd() is conditional on the SME feature bit which is read directly from CPUID. But that readout does not check whether the CPUID leaf is available or not. If it's not available the CPU will return the value of the highest supported leaf instead. Depending on the content the "SME" bit might be set or not. That's incorrect but harmless. Making the CPUID readout conditional makes the observed hangs go away, but it does not fix the underlying problem: CPU0 CPU1 stop_other_cpus() send_IPIs(REBOOT); stop_this_cpu() while (num_online_cpus() > 1); set_online(false); proceed... -> hang wbinvd() WBINVD is an expensive operation and if multiple CPUs issue it at the same time the resulting delays are even larger. But CPU0 already observed num_online_cpus() going down to 1 and proceeds which causes the system to hang. This issue exists independent of WBINVD, but the delays caused by WBINVD make it more prominent. Make this more robust by adding a cpumask which is initialized to the online CPU mask before sending the IPIs and CPUs clear their bit in stop_this_cpu() after the WBINVD completed. Check for that cpumask to become empty in stop_other_cpus() instead of watching num_online_cpus(). The cpumask cannot plug all holes either, but it's better than a raw counter and allows to restrict the NMI fallback IPI to be sent only the CPUs which have not reported within the timeout window. Fixes: 08f253ec3767 ("x86/cpu: Clear SME feature flag when not in use") Reported-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/3817d810-e0f1-8ef8-0bbd-663b919ca49b@cybernetics.com Link: https://lore.kernel.org/r/87h6r770bv.ffs@tglx
2023-06-20Merge tag 'ipsec-2023-06-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec ipsec-2023-06-20
2023-06-20fs: Provide helpers for manipulating sb->s_readonly_remountJan Kara
Provide helpers to set and clear sb->s_readonly_remount including appropriate memory barriers. Also use this opportunity to document what the barriers pair with and why they are needed. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Message-Id: <20230620112832.5158-1-jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-20mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019Marek Vasut
This microSD card never clears Flush Cache bit after cache flush has been started in sd_flush_cache(). This leads e.g. to failure to mount file system. Add a quirk which disables the SD cache for this specific card from specific manufacturing date of 11/2019, since on newer dated cards from 05/2023 the cache flush works correctly. Fixes: 08ebf903af57 ("mmc: core: Fixup support for writeback-cache for eMMC and SD") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230620102713.7701-1-marex@denx.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20cpufreq: amd-pstate: Set default governor to schedutilMario Limonciello
The Kconfig currently defaults the governor to schedutil on x86_64 only when intel-pstate and SMP have been selected. If the kernel is built only with amd-pstate, the default governor should also be schedutil. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Tested-by: Perry Yuan <Perry.Yuan@amd.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-20mmc: core: disable TRIM on Kingston EMMC04G-M627Robert Marko
It seems that Kingston EMMC04G-M627 despite advertising TRIM support does not work when the core is trying to use REQ_OP_WRITE_ZEROES. We are seeing I/O errors in OpenWrt under 6.1 on Zyxel NBG7815 that we did not previously have and tracked it down to REQ_OP_WRITE_ZEROES. Trying to use fstrim seems to also throw errors like: [93010.835112] I/O error, dev loop0, sector 16902 op 0x3:(DISCARD) flags 0x800 phys_seg 1 prio class 2 Disabling TRIM makes the error go away, so lets add a quirk for this eMMC to disable TRIM. Signed-off-by: Robert Marko <robimarko@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230619193621.437358-1-robimarko@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20mmc: mmci: stm32: add delay block support for STM32MP25Yann Gautier
On STM32MP25, the delay block is inside the SoC, and configured through the SYSCFG registers. The algorithm is also different from what was in STM32MP1 chip. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20230619115120.64474-7-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20mmc: mmci: stm32: prepare other delay block supportYann Gautier
Create an sdmmc_tuning_ops struct to ease support for another delay block peripheral. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20230619115120.64474-6-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20mmc: mmci: stm32: manage block gap hardware flow controlYann Gautier
In stm32 sdmmc variant revision v3.0, a block gap hardware flow control should be used with bus speed modes SDR104 and HS200. It is enabled by writing a non-null value to the new added register MMCI_STM32_FIFOTHRR. The threshold will be 2^(N-1) bytes, so we can use the ffs() function to compute the value N to be written to the register. The threshold used should be the data block size, but must not be bigger than the FIFO size. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20230619115120.64474-5-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20mmc: mmci: Add support for sdmmc variant revision v3.0Yann Gautier
This is an update of the SDMMC revision v2.2, with just an increased FIFO size, from 64B to 1kB. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20230619115120.64474-4-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20mmc: mmci: add stm32_idmabsize_align parameterYann Gautier
The alignment for the IDMA size depends on the peripheral version, it should then be configurable. Add stm32_idmabsize_align in the variant structure. And remove now unused (and wrong) MMCI_STM32_IDMABNDT_* macros. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20230619115120.64474-3-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20dt-bindings: mmc: mmci: Add st,stm32mp25-sdmmc2 compatibleYann Gautier
For STM32MP25, we'll need to distinguish how is managed the delay block. This is done through a new comptible dedicated for this SoC, as the delay block registers are located in SYSCFG peripheral. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230619115120.64474-2-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-20Merge tag 'devfreq-next-for-6.5' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Merge devfreq updates for v6.5 from Chanwoo Choi: "1. Reorder fieldls in 'struct devfreq_dev_status' in order to shrink the size of 'struct devfreqw_dev_status' without any behavior changes. 2. Add exynos-ppmu.c driver as a soft module dependency in order to prevent the freeze issue between exynos-bus.c devfreq driver and exynos-ppmu.c devfreq event driver. 3. Fix variable deferencing before NULL check on mtk-cci-devfreq.c" * tag 'devfreq-next-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: mtk-cci: Fix variable deferencing before NULL check PM / devfreq: exynos: add Exynos PPMU as a soft module dependency PM / devfreq: Reorder fields in 'struct devfreq_dev_status'
2023-06-20Merge branch 'dsa-mt7530-fixes'David S. Miller
Arınç ÜNAL says: ==================== net: dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling This patch series fixes all non-theoretical issues regarding multiple CPU ports and the handling of LLDP frames and BPDUs. I am adding me as a maintainer, I've got some code improvements on the way. I will keep an eye on this driver and the patches submitted for it in the future. Arınç v6: - Change a small portion of the comment in the diff on "net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP" with Russell's suggestion. - Change the patch log of "net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switch" with Vladimir's suggestion. - Group the code for trapping frames into a common function and call that. - Add Vladimir and Russell's reviewed-by tags to where they're given. v5: - Change the comment in the diff on the first patch with Russell's words. - Change the patch log of the first patch to state that the patch is just preparatory work for change "net: dsa: introduce preferred_default_local_cpu_port and use on MT7530" and not a fix to an existing problem on the code base. - Remove the "net: dsa: mt7530: fix trapping frames with multiple CPU ports on MT7530" patch. It fixes a theoretical issue, therefore it is net-next material. - Remove unnecessary information from the patch logs. Remove the enum renaming change. - Strengthen the point of the "net: dsa: introduce preferred_default_local_cpu_port and use on MT7530" patch. v4: Make the patch logs and my comments in the code easier to understand. v3: Fix the from header on the patches. Write a cover letter. v2: Add patches to fix the handling of LLDP frames and BPDUs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20MAINTAINERS: add me as maintainer of MEDIATEK SWITCH DRIVERArınç ÜNAL
Add me as a maintainer of the MediaTek MT7530 DSA subdriver. List maintainers in alphabetical order by first name. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: introduce preferred_default_local_cpu_port and use on MT7530Vladimir Oltean
Since the introduction of the OF bindings, DSA has always had a policy that in case multiple CPU ports are present in the device tree, the numerically smallest one is always chosen. The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because it has higher bandwidth. The MT7530 driver developers had 3 options: - to modify DSA when the MT7531 switch support was introduced, such as to prefer the better port - to declare both CPU ports in device trees as CPU ports, and live with the sub-optimal performance resulting from not preferring the better port - to declare just port 6 in the device tree as a CPU port Of course they chose the path of least resistance (3rd option), kicking the can down the road. The hardware description in the device tree is supposed to be stable - developers are not supposed to adopt the strategy of piecemeal hardware description, where the device tree is updated in lockstep with the features that the kernel currently supports. Now, as a result of the fact that they did that, any attempts to modify the device tree and describe both CPU ports as CPU ports would make DSA change its default selection from port 6 to 5, effectively resulting in a performance degradation visible to users with the MT7531BE switch as can be seen below. Without preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender [ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver With preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender [ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver Using one port for WAN and the other ports for LAN is a very popular use case which is what this test emulates. As such, this change proposes that we retroactively modify stable kernels (which don't support the modification of the CPU port assignments, so as to let user space fix the problem and restore the throughput) to keep the mt7530 driver preferring port 6 even with device trees where the hardware is more fully described. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: fix handling of LLDP framesArınç ÜNAL
LLDP frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat LLDP frames as regular multicast frames, therefore flooding them to user ports. To fix this, set LLDP frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: fix handling of BPDUs on MT7530 switchArınç ÜNAL
BPDUs are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT7530 switch treats BPDUs as regular multicast frames, therefore flooding them to user ports. To fix this, set BPDUs to be trapped to the CPU port. Group this on mt7530_setup() and mt7531_setup_common() into mt753x_trap_frames() and call that. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switchArınç ÜNAL
All MT7530 switch IP variants share the MT7530_MFC register, but the current driver only writes it for the switch variant that is integrated in the MT7621 SoC. Modify the code to include all MT7530 derivatives. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAPArınç ÜNAL
MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU frames (further restricted by PCR_MATRIX). Currently the driver sets the first CPU port as the single port in this bit mask, which works fine regardless of whether the device tree defines port 5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's logic of picking the first CPU port as the CPU port that all user ports are affine to, by default. An upcoming change would like to influence DSA's selection of the default CPU port to no longer be the first one, and in that case, this logic needs adaptation. Since there is no observed leakage or duplication of frames if all CPU ports are defined in this bit mask, simply include them all. Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dpaa2-mac: add 25gbase-r supportJosua Mayer
Layerscape MACs support 25Gbps network speed with dpmac "CAUI" mode. Add the mappings between DPMAC_ETH_IF_* and HY_INTERFACE_MODE_*, as well as the 25000 mac capability. Tested on SolidRun LX2162a Clearfog, serdes 1 protocol 18. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20Merge tag 'ieee802154-for-net-2023-06-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== An update from ieee802154 for your *net* tree: Two small fixes and MAINTAINERS update this time. Azeem Shaikh ensured consistent use of strscpy through the tree and fixed the usage in our trace.h. Chen Aotian fixed a potential memory leak in the hwsim simulator for ieee802154. Miquel Raynal updated the MAINATINERS file with the new team git tree locations and patchwork URLs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-19Merge tag 'hyperv-fixes-signed-20230619' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix races in Hyper-V PCI controller (Dexuan Cui) - Fix handling of hyperv_pcpu_input_arg (Michael Kelley) - Fix vmbus_wait_for_unload to scan present CPUs (Michael Kelley) - Call hv_synic_free in the failure path of hv_synic_alloc (Dexuan Cui) - Add noop for real mode handlers for virtual trust level code (Saurabh Sengar) * tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: PCI: hv: Add a per-bus mutex state_lock Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally" PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic PCI: hv: Fix a race condition bug in hv_pci_query_relations() arm64/hyperv: Use CPUHP_AP_HYPERV_ONLINE state to fix CPU online sequencing x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails x86/hyperv/vtl: Add noop for realmode pointers
2023-06-19watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCHPetr Mladek
The HAVE_ prefix means that the code could be enabled. Add another variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix. It will be set when it should be built. It will make it compatible with the other hardlockup detectors. The change allows to clean up dependencies of PPC_WATCHDOG and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc. As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies on arm, x86, powerpc architectures. Link: https://lkml.kernel.org/r/20230616150618.6073-7-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64Petr Mladek
The HAVE_ prefix means that the code could be enabled. Add another variable for HAVE_HARDLOCKUP_DETECTOR_SPARC64 without this prefix. It will be set when it should be built. It will make it compatible with the other hardlockup detectors. Before, it is far from obvious that the SPARC64 variant is actually used: $> make ARCH=sparc64 defconfig $> grep HARDLOCKUP_DETECTOR .config CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y After, it is more clear: $> make ARCH=sparc64 defconfig $> grep HARDLOCKUP_DETECTOR .config CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_SPARC64=y CONFIG_HARDLOCKUP_DETECTOR_SPARC64=y Link: https://lkml.kernel.org/r/20230616150618.6073-6-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specificPetr Mladek
There are several hardlockup detector implementations and several Kconfig values which allow selection and build of the preferred one. CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c1f53acb ("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36. It was a preparation step for introducing the new generic perf hardlockup detector. The existing arch-specific variants did not support the to-be-created generic build configurations, sysctl interface, etc. This distinction was made explicit by the commit 4a7863cc2eb5f98 ("x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR") in v2.6.38. CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c695f967e105 ("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used by three architectures, namely blackfin, mn10300, and sparc. The support for blackfin and mn10300 architectures has been completely dropped some time ago. And sparc is the only architecture with the historic NMI watchdog at the moment. And the old sparc implementation is really special. It is always built on sparc64. It used to be always enabled until the commit 7a5c8b57cec93196b ("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added in v4.10-rc1. There are only few locations where the sparc64 NMI watchdog interacts with the generic hardlockup detectors code: + implements arch_touch_nmi_watchdog() which is called from the generic touch_nmi_watchdog() + implements watchdog_hardlockup_enable()/disable() to support /proc/sys/kernel/nmi_watchdog + is always preferred over other generic watchdogs, see CONFIG_HARDLOCKUP_DETECTOR + includes asm/nmi.h into linux/nmi.h because some sparc-specific functions are needed in sparc-specific code which includes only linux/nmi.h. The situation became more complicated after the commit 05a4a95279311c3 ("kernel/watchdog: split up config options") and commit 2104180a53698df5 ("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1. They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc specific hardlockup detector. It was compatible with the perf one regarding the general boot, sysctl, and programming interfaces. HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of HAVE_NMI_WATCHDOG. It made some sense because all arch-specific detectors had some common requirements, namely: + implemented arch_touch_nmi_watchdog() + included asm/nmi.h into linux/nmi.h + defined the default value for /proc/sys/kernel/nmi_watchdog But it actually has made things pretty complicated when the generic buddy hardlockup detector was added. Before the generic perf detector was newer supported together with an arch-specific one. But the buddy detector could work on any SMP system. It means that an architecture could support both the arch-specific and buddy detector. As a result, there are few tricky dependencies. For example, CONFIG_HARDLOCKUP_DETECTOR depends on: ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH The problem is that the very special sparc implementation is defined as: HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear without reading understanding the history. Make the logic less tricky and more self-explanatory by making HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to HAVE_HARDLOCKUP_DETECTOR_SPARC64. Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF, and HARDLOCKUP_DETECTOR_BUDDY may conflict only with HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR and it is not longer enabled when HAVE_NMI_WATCHDOG is set. Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.hPetr Mladek
arch_touch_nmi_watchdog() needs a different implementation for various hardlockup detector implementations. And it does nothing when any hardlockup detector is not built at all. arch_touch_nmi_watchdog() is declared via linux/nmi.h. And it must be defined as an empty function when there is no hardlockup detector. It is done directly in this header file for the perf and buddy detectors. And it is done in the included asm/linux.h for arch specific detectors. The reason probably is that the arch specific variants build the code using another conditions. For example, powerpc64/sparc64 builds the code when CONFIG_PPC_WATCHDOG is enabled. Another reason might be that these architectures define more functions in asm/nmi.h anyway. However the generic code actually knows when the function will be implemented. It happens when some full featured or the sparc64-specific hardlockup detector is built. In particular, CONFIG_HARDLOCKUP_DETECTOR can be enabled only when a generic or arch-specific full featured hardlockup detector is available. The only exception is sparc64 which can be built even when the global HARDLOCKUP_DETECTOR switch is disabled. The information about sparc64 is a bit complicated. The hardlockup detector is built there when CONFIG_HAVE_NMI_WATCHDOG is set and CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH is not set. People might wonder whether this change really makes things easier. The motivation is: + The current logic in linux/nmi.h is far from obvious. For example, arch_touch_nmi_watchdog() is defined as {} when neither CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER nor CONFIG_HAVE_NMI_WATCHDOG is defined. + The change synchronizes the checks in lib/Kconfig.debug and in the generic code. + It is a step that will help cleaning HAVE_NMI_WATCHDOG related checks. The change should not change the existing behavior. Link: https://lkml.kernel.org/r/20230616150618.6073-4-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: make the config checks more straightforwardPetr Mladek
There are four possible variants of hardlockup detectors: + buddy: available when SMP is set. + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set. + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set. + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set. The check for the sparc64 variant is more complicated because HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific and sparc64 specific variant. Therefore it is automatically selected with HAVE_HARDLOCKUP_DETECTOR_ARCH. This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH. It reduces the size of some checks but it makes them harder to follow. Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global HARDLOCKUP_DETECTOR switch is enabled/disabled. Make the logic more straightforward by the following changes: + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and HAVE_NMI_WATCHDOG in comments. + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate HAVE_* for all four hardlockup detector variants. Use it in the other conditions instead of SMP. It makes it clear that it is about the buddy detector. + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand the conditions between the four hardlockup detector variants. + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY can be enabled. It explains the dependency on the other hardlockup detector variants. Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply". It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when the global HARDLOCKUP_DETECTOR switch is changed. + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables disappear when the hardlockup detectors are disabled. Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY value is not preserved when the global switch is disabled. The user has to make the decision again when it gets re-enabled. Link: https://lkml.kernel.org/r/20230616150618.6073-3-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19watchdog/hardlockup: sort hardlockup detector related config values a ↵Petr Mladek
logical way Patch series "watchdog/hardlockup: Cleanup configuration of hardlockup detectors", v2. Clean up watchdog Kconfig after introducing the buddy detector. This patch (of 6): There are four possible variants of hardlockup detectors: + buddy: available when SMP is set. + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set. + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set. + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set. Only one hardlockup detector can be compiled in. The selection is done using quite complex dependencies between several CONFIG variables. The following patches will try to make it more straightforward. As a first step, reorder the definitions of the various CONFIG variables. The logical order is: 1. HAVE_* variables define available variants. They are typically defined in the arch/ config files. 2. HARDLOCKUP_DETECTOR y/n variable defines whether the hardlockup detector is enabled at all. 3. HARDLOCKUP_DETECTOR_PREFER_BUDDY y/n variable defines whether the buddy detector should be preferred over the perf one. Note that the arch specific variants are always preferred when available. 4. HARDLOCKUP_DETECTOR_PERF/BUDDY variables define whether the given detector is enabled in the end. 5. HAVE_HARDLOCKUP_DETECTOR_NON_ARCH and HARDLOCKUP_DETECTOR_NON_ARCH are temporary variables that are going to be removed in a followup patch. This is a preparation step for further cleanup. It will change the logic without shuffling the definitions. This change temporary breaks the C-like ordering where the variables are declared or defined before they are used. It is not really needed for Kconfig. Also the following patches will rework the logic so that the ordering will be C-like in the end. The patch just shuffles the definitions. It should not change the existing behavior. Link: https://lkml.kernel.org/r/20230616150618.6073-1-pmladek@suse.com Link: https://lkml.kernel.org/r/20230616150618.6073-2-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 01:20:15 +0000