| Age | Commit message (Collapse) | Author |
|---|
|
The list of devices is protected by the device_list_mutex and the device
replace code, in its finishing phase correctly takes that mutex before
removing the source device from that list. However the readahead code was
iterating that list without acquiring the respective mutex leading to
crashes later on due to invalid memory accesses:
[125671.831036] general protection fault: 0000 [#1] PREEMPT SMP
[125671.832129] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis tpm ppdev evdev parport_pc psmouse sg parport
processor ser
[125671.834973] CPU: 10 PID: 19603 Comm: kworker/u32:19 Tainted: G W 4.6.0-rc7-btrfs-next-29+ #1
[125671.834973] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[125671.834973] Workqueue: btrfs-readahead btrfs_readahead_helper [btrfs]
[125671.834973] task: ffff8801ac520540 ti: ffff8801ac918000 task.ti: ffff8801ac918000
[125671.834973] RIP: 0010:[<ffffffff81270479>] [<ffffffff81270479>] __radix_tree_lookup+0x6a/0x105
[125671.834973] RSP: 0018:ffff8801ac91bc28 EFLAGS: 00010206
[125671.834973] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b6a RCX: 0000000000000000
[125671.834973] RDX: 0000000000000000 RSI: 00000000000c1bff RDI: ffff88002ebd62a8
[125671.834973] RBP: ffff8801ac91bc70 R08: 0000000000000001 R09: 0000000000000000
[125671.834973] R10: ffff8801ac91bc70 R11: 0000000000000000 R12: ffff88002ebd62a8
[125671.834973] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000c1bff
[125671.834973] FS: 0000000000000000(0000) GS:ffff88023fd40000(0000) knlGS:0000000000000000
[125671.834973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[125671.834973] CR2: 000000000073cae4 CR3: 00000000b7723000 CR4: 00000000000006e0
[125671.834973] Stack:
[125671.834973] 0000000000000000 ffff8801422d5600 ffff8802286bbc00 0000000000000000
[125671.834973] 0000000000000001 ffff8802286bbc00 00000000000c1bff 0000000000000000
[125671.834973] ffff88002e639eb8 ffff8801ac91bc80 ffffffff81270541 ffff8801ac91bcb0
[125671.834973] Call Trace:
[125671.834973] [<ffffffff81270541>] radix_tree_lookup+0xd/0xf
[125671.834973] [<ffffffffa04ae6a6>] reada_peer_zones_set_lock+0x3e/0x60 [btrfs]
[125671.834973] [<ffffffffa04ae8b9>] reada_pick_zone+0x29/0x103 [btrfs]
[125671.834973] [<ffffffffa04af42f>] reada_start_machine_worker+0x129/0x2d3 [btrfs]
[125671.834973] [<ffffffffa04880be>] btrfs_scrubparity_helper+0x185/0x3aa [btrfs]
[125671.834973] [<ffffffffa0488341>] btrfs_readahead_helper+0xe/0x10 [btrfs]
[125671.834973] [<ffffffff81069691>] process_one_work+0x271/0x4e9
[125671.834973] [<ffffffff81069dda>] worker_thread+0x1eb/0x2c9
[125671.834973] [<ffffffff81069bef>] ? rescuer_thread+0x2b3/0x2b3
[125671.834973] [<ffffffff8106f403>] kthread+0xd4/0xdc
[125671.834973] [<ffffffff8149e242>] ret_from_fork+0x22/0x40
[125671.834973] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286
So fix this by taking the device_list_mutex in the readahead code. We
can't use here the lighter approach of using a rcu_read_lock() and
rcu_read_unlock() pair together with a list_for_each_entry_rcu() call
because we end up doing calls to sleeping functions (kzalloc()) in the
respective code path.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
|
|
commit 059500940def (ACPI/video: export acpi_video_get_levels)
mistakenly dropped the correct value of max_level and that caused the
set_level function following failed and the acpi_video backlight interface
didn't get created. Fix this by passing back the correct max_level value.
While at it, also fix the param used in acpi_video_device_lcd_query_levels
where acpi_handle is expected but acpi_video_device is passed.
Fixes: 059500940def (ACPI/video: export acpi_video_get_levels)
Reported-and-tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the documentation comment does not have params or sections, the
section heading may leak from the previous documentation comment.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If there are multiple sections with the same section name, the current
implementation results in several sections by the same heading, with the
content duplicated from the last section to all. Even if there's the
error message, a more graceful approach is to combine all the
identically named sections into one, with concatenated contents.
With the supported sections already limited to select few, there are
massively fewer collisions than there used to be, but this is still
useful for e.g. when function parameters are documented in the middle of
a documentation comment, with description spread out above and
below. (This is not a recommended documentation style, but used in the
kernel nonetheless.)
We can now also demote the error to a warning.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
kernel-doc currently identifies anything matching "section header:"
(specifically a string of word characters and spaces followed by a
colon) as a new section in the documentation comment, and renders the
section header accordingly.
Unfortunately, this turns all uses of colon into sections, mostly
unintentionally. Considering the output, erroneously creating sections
when not intended is always worse than erroneously not creating sections
when intended. For example, a line with "http://example.com" turns into
a "http" heading followed by "//example.com" in normal text style, which
is quite ugly. OTOH, "WARNING: Beware of the Leopard" is just fine even
if "WARNING" does not turn into a heading.
It is virtually impossible to change all the kernel-doc comments, either
way. The compromise is to pick the most commonly used and depended on
section headers (with variants) and accept them as section headers.
The accepted section headers are, case insensitive:
* description:
* context:
* return:
* returns:
Additionally, case sensitive:
* @return:
All of the above are commonly used in the kernel-doc comments, and will
result in worse output if not identified as section headers. Also,
kernel-doc already has some special handling for all of them, so there's
nothing particularly controversial in adding more special treatment for
them.
While at it, improve the whitespace handling surrounding section
names. Do not consider the whitespace as part of the name.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Yes, for our purposes the type should contain typedef.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The latter isn't special to rst.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If a param description spans multiple lines, check any leading
whitespace in the first continuation line, and remove same amount of
whitespace from following lines.
This allows indentation in the multi-line parameter descriptions for
aesthetical reasons while not causing accidentally significant
indentation in the rst output.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Handle whitespace on the first line of param text as if it was the empty
string. There is no need to add the newline in this case. This improves
the rst output in particular, where blank lines may be problematic in
parameter lists.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move away from field lists, and simply use **strong emphasis** for
section headings on lines of their own. Do not use rst section headings,
because their nesting depth depends on the surrounding context, which
kernel-doc has no knowledge of. Also, they do not need to end up in any
table of contexts or indexes.
There are two related immediate benefits. Field lists are typically
rendered in two columns, while the new style uses the horizontal width
better. With no extra indent on the left, there's no need to be as fussy
about it. Field lists are more susceptible to indentation problems than
the new style.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The inline member markup allows whitespace lines before the actual
documentation starts. Strip the leading blank lines. This improves the
rst output.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Current approach leads to two blank lines, while one is enough.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The use of these is confusing in the script, and per this grep, they're
not used anywhere anyway:
$ git grep " \* [%$&][a-zA-Z0-9_]*:" -- *.[ch] | grep -v "\$\(Id\|Revision\|Date\)"
While at it, throw out the constants array, nothing is ever put there
again.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let the user use @foo, &bar, %baz, etc. in the first kernel-doc purpose
line too.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This bit is already done by xml_unescape() above.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Link "&foo->bar", "&foo->bar()", "&foo.bar", and "&foo.bar()" to the
struct/union/enum foo definition. The members themselves do not
currently have anchors to link to, but this is better than nothing, and
promotes a universal notation.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let the user use "&union foo" and "&typedef foo" to reference foo. The
difference to using "union &foo", "typedef &foo", or just "&foo" (which
are valid too) is that "union" and "typedef" become part of the link
text.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It's possible to use &foo to reference structs, enums, typedefs, etc. in
the Sphinx C domain. Thus do not prefix the links with "struct".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Sphinx C domain spec says function references should include the
parens ().
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If the user requests a specific DOC: section by name, do not output its
section title. In these cases, the surrounding context already has a
heading, and the DOC: section title is only used as an identifier and a
heading for clarity in the source file.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make the output selection a bit more readable by adding constants for
the various types of output selection. While at it, actually call the
variable for choosing what to output $output_selection.
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make the state machine a bit more readable by adding constants for
parser states and inline member documentation parser substates. While at
it, rename the "split" documentation to "inline" documentation.
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add "struct" in the label of the reference.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Function references should include the parens (), struct references
should not include "struct".
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This script uses pandoc to convert existing DocBook template files to RST
templates. A couple of sed scripts are need to massage things both before
and after the conversion, but the result is then usable with no hand
editing.
[Jani: Change usage to tmplcvt <in> <out>. Fix escaping for docproc
directives. Add support the new kernel-doc extension.]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Read the version and release from the top level Makefile (for use when
Sphinx is invoked directly, by e.g. Read the Docs), but override them
via Sphinx command line arguments in a normal documentation build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Tell Sphinx where to find the extension, and pass on the kernel src tree
and kernel-doc paths to the extension.
With this, any .rst files under Documentation may contain the kernel-doc
rst directive to include kernel-doc documentation from any source file.
While building, it may be handy to pass kernel-doc extension
configuration on the command line. For example, 'make SPHINXOPTS="-D
kerneldoc_verbosity=0" htmldocs' silences all stderr output from
kernel-doc when the kernel-doc exit code is 0. (The stderr will be
logged unconditionally when the exit code is non-zero.)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add an extension to handle kernel-doc directives, to call kernel-doc
according to the arguments and parameters given to the reStructuredText
directive.
The syntax for the kernel-doc directive is:
.. kernel-doc:: FILENAME
:export:
:internal:
:functions: FUNCTION [FUNCTION ...]
:doc: SECTION TITLE
Of the directive options export, internal, functions, and doc, currently
only one option may be given at a time.
The FILENAME is relative from the kernel source tree root.
The extension notifies Sphinx about the document dependency on FILENAME,
causing the document to be rebuilt when the file has been changed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Sphinx output directory is generated.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we use docproc to figure out which symbols are exported, and
then docproc calls kernel-doc on specific functions, to get
documentation on exported functions. According to git blame and docproc
comments, this is due to historical reasons, as functions and their
corresponding EXPORT_SYMBOL* may have been in different files. However
for more than ten years the recommendation in CodingStyle has been to
place the EXPORT_SYMBOL* immediately after the closing function brace
line.
Additionally, the kernel-doc comments for functions are generally placed
above the function definition in the .c files (i.e. where the
EXPORT_SYMBOL* is) rather than above the declaration in the .h
files. There are some exceptions to this, but AFAICT none of these are
included in DocBook documentation using the "!E" docproc directive.
Therefore, assuming the EXPORT_SYMBOL* and kernel-doc are with the
function definition, kernel-doc can extract the exported vs. not
information by making two passes on the input file. Add support for that
via the new -export and -internal parameters.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
I'm not quite sure why the errors below are happening, but this fixes
them.
Use of uninitialized value in string ne at ./scripts/kernel-doc line 1819, <IN> line 6494.
Use of uninitialized value $_[0] in join or string at ./scripts/kernel-doc line 1759, <IN> line 6494.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464599449-12509-1-git-send-email-daniel.vetter@ffwll.ch
|
|
When a CRTC is going to be disabled, it's state may contain a display mode
with zeroed content. This could be reproduced by HDMI cable hotplug out
operation with legacy fbdev support in dual display cases. It would confuse
driver's CRTC callback ->mode_fixup and make the total state be rejected.
So, let's don't call the callback for the CRTC.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464341754-7087-1-git-send-email-gnuiyl@gmail.com
|
|
Fix egregious typo in comment.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/10576.1464589598@turing-police.cc.vt.edu
|
|
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The input/output directions were inversed on the GPIO direction
read function. Loose a ! and it is correct.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
As irqchip and gpiochip functions are orthogonal, the IRQ
set-up or something else can have changed the direction of
the GPIO line from what the GPIO descriptor knows when we
get into gpiochip_lock_as_irq(). Make sure to re-read the
direction setting if we have the .get_direction() callback
enabled for the chip.
Else we get problems like this:
iio iio:device2: interrupts on the rising edge
gpio gpiochip2: (8012e080.gpio): gpiochip_lock_as_irq:
tried to flag a GPIO set as output for IRQ
gpio gpiochip2: (8012e080.gpio): unable to lock HW IRQ 0 for IRQ
genirq: Failed to request resources for l3g4200d-trigger
(irq 111) on irqchip nmk1-32-63
iio iio:device2: failed to request trigger IRQ.
st-gyro-i2c: probe of 2-0068 failed with error -22
Fixes: 72d320006177 ("gpio: set up initial state from .get_direction()")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The "to_irq" functionality is broken inside this driver since commit
76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler").
The addition of the new lpc32xx irqchip driver in 4.7, fixed the
lpc32xx platform interrupt issue.
When switching to the new lpc32xx irqchip driver, a warning appear
in the lpc32xx gpio driver: warning: "NR_IRQS" redefined.
To remove this warning (temporary solution), this patch
disables the broken "to_irq" mapping functionality support.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Since the drm core sets plane->crtc correctly, we don't need to do that.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This patch allows to select a specific video mode from a list of modes
defined in DT by setting the 'native-mode' property appropriately.
This change does not affect the behaviour of existing platforms, since
they either:
- have just one display-timings subnode
- have the native-mode property pointing to the first entry
- let the bootloader select the appropriate timing
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The 'mode_valid' flag is never set in this driver. Remove it and the
code that depends on it.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This patch allows panels to set pixel clock and data enable pin polarity
other than the default of driving data at the falling pixel clock edge
and active high display enable.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Advertise the DRM_FORMAT_UYVY and DRM_FORMAT_VYUY formats to userspace.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Instead of using of_graph_get_port_by_id() to get the port and then
of_get_child_by_name() to get the first endpoint, get to the endpoint
in a single step.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Instead of using of_graph_get_port_by_id() to get the port and then
of_get_child_by_name() to get the first endpoint, get to the endpoint
in a single step.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Document the ddc-i2c-bus property used by imx-ldb driver to read EDID
information via I2C interface.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add support for reading EDID over Display Data Channel. If no DDC
adapter is available, falls back to hardcoded EDID or display-timings
node as before.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
