summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-22scsi: aacraid: Skip IOP reset on controller panic(SMART Family)Raghava Aditya Renukunta
When the SMART family of controller panic (KERNEL_PANIC) , they do not honor IOP resets. So better to skip it and directly perform a IWBR reset. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Decrease adapter health check intervalRaghava Aditya Renukunta
Currently driver checks the health status of the adapter once every 24 hours. When that happens the driver becomes dependent on the kernel to figure out if the adapter is misbehaving. This might take some time (when the adapter is idle). The driver currently has support to restart/recover the controller when it fails, and decreasing the time interval will help. Fixed by decreasing check interval from 24 hours to 1 minute Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Reload offlined drives after controller resetRaghava Aditya Renukunta
During the IOP reset stress testing, it was found that the drives can be marked offline when the adapter controller crashes and IO's are running in parallel. When the controller does come back from the reset, the drive that is marked offline is not exposed. Fixed by removing and adding drives that are marked offline. In addition invoke a scsi host bus rescan to capture any additional configuration changes. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Skip wellness sync on controller failureRaghava Aditya Renukunta
aac_command_thread checks on the health of controller periodically, using aac_check_health. If the status is an error state KERNEL_PANIC or anything else. The driver will attempt to restart the adapter, but the response is not checked in aac_command_thread. This allows the periodic sync to go thru and lead the driver to a hung state. Fixed by terminating the periodic loop(intended per original design), if the controller is not restored to a healthy state. Cc: stable@vger.kernel.org Fixes: 3d77d8404478353358 (scsi: aacraid: Added support for periodic wellness sync) Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Fix sync fibs time out on controller resetRaghava Aditya Renukunta
After controller shutdown, all sync fibs time out due to not knowing about the switch to INT-x mode Fixed by replacing aac_src_access_devreg() to aac_set_intx_mode() call. Cc: stable@vger.kernel.org Fixes: 495c021767bd78c998 (aacraid: MSI-x support) Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Added sysfs for driver versionRaghava Aditya Renukunta
Added support to retrieve driver version from a new sysfs variable called driver_version. It makes it easier for the user to figure out the driver version that is currently running. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Fix memory leak in fib init pathRaghava Aditya Renukunta
aac_fib_map_free frees misaligned fib dma memory, additionally it does not free up the whole memory. Fixed by changing the code to free up the correct and full memory allocation. Cc: stable@vger.kernel.org Fixes: e8b12f0fb835223 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family) Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Prevent E3 lockup when deleting unitsRaghava Aditya Renukunta
Arrconf management utility at times sends fibs with AdapterProcessed set in its fibs. This causes the controller to panic and lockup. Fixed by failing the commands that have AdapterProcessed set in its flag. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Fix for excessive prints on EEHRaghava Aditya Renukunta
This issue showed up on a kdump debug(single CPU on powerkvm), when EEH errors rendered the adapter unusable. The driver correctly detected the issue and attempted to restart the controller, in doing so the driver attempted to read the status registers of the controller. This triggered additional eeh errors which continued for a good 6 minutes. Fixed by returning without waiting when EEH error is reported. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Use correct channel number for raw srbRaghava Aditya Renukunta
The channel being used for raw srb commands is retrieved from the utility sent fibs and is converted into physical channel id. The driver does not need to to do this since the management utility sends the correct channel id in the first place and in addition the driver sets inaccurate information in the cmd sent to the firmware and gets an invalid response. Fixed by using channel id from srb command. Cc: stable@vger.kernel.org Fixes: 423400e64d377c0 ("scsi: aacraid: Include HBA direct interface") Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: aacraid: Fix camel caseRaghava Aditya Renukunta
Replaced camel case with snake case for init supported options. Suggested-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22drm/amd/powerplay: fix PSI feature on Polars12.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-23seccomp: Only dump core when single-threadedKees Cook
The SECCOMP_RET_KILL filter return code has always killed the current thread, not the entire process. Changing this as a side-effect of dumping core isn't a safe thing to do (a few test suites have already flagged this behavioral change). Instead, restore the RET_KILL semantics, but still dump core when a RET_KILL delivers SIGSYS to a single-threaded process. Fixes: b25e67161c29 ("seccomp: dump core when using SECCOMP_RET_KILL") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-02-22nvme: detect NVMe controller in recent MacBooksDaniel Roschka
Adds support for detection of the NVMe controller found in the following recent MacBooks: - Retina MacBook 2016 (MacBook9,1) - 13" MacBook Pro 2016 without Touch Bar (MacBook13,1) - 13" MacBook Pro 2016 with Touch Bar (MacBook13,2) Signed-off-by: Daniel Roschka <danielroschka@phoenitydawn.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22tcp: account for ts offset only if tsecr not zeroAlexey Kodanev
We can get SYN with zero tsecr, don't apply offset in this case. Fixes: ee684b6f2830 ("tcp: send packets with a socket timestamp") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22tcp: setup timestamp offset when write_seq already setAlexey Kodanev
Found that when randomized tcp offsets are enabled (by default) TCP client can still start new connections without them. Later, if server does active close and re-uses sockets in TIME-WAIT state, new SYN from client can be rejected on PAWS check inside tcp_timewait_state_process(), because either tw_ts_recent or rcv_tsval doesn't really have an offset set. Here is how to reproduce it with LTP netstress tool: netstress -R 1 & netstress -H 127.0.0.1 -lr 1000000 -a1 [...] < S seq 1956977072 win 43690 TS val 295618 ecr 459956970 > . ack 1956911535 win 342 TS val 459967184 ecr 1547117608 < R seq 1956911535 win 0 length 0 +1. < S seq 1956977072 win 43690 TS val 296640 ecr 459956970 > S. seq 657450664 ack 1956977073 win 43690 TS val 459968205 ecr 296640 Fixes: 95a22caee396 ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-23powerpc: Remove leftover cputime_to_nsecs call causing build errorFrédéric Weisbecker
This type conversion is a leftover that got ignored during the kcpustat conversion to nanosecs, resulting in build breakage with config having CONFIG_NO_HZ_FULL=y. arch/powerpc/kernel/time.c: In function 'running_clock': arch/powerpc/kernel/time.c:712:2: error: implicit declaration of function 'cputime_to_nsecs' [-Werror=implicit-function-declaration] return local_clock() - cputime_to_nsecs(kcpustat_this_cpu->cpustat[CPUTIME_STEAL]); All we need is to remove it. Fixes: e7f340ca9c07 ("powerpc, sched/cputime: Remove unused cputime definitions") Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-23powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPUAneesh Kumar K.V
We will set LPCR with correct value for radix during int. This make sure we start with a sanitized value of LPCR. In case of kexec, cpus can have LPCR value based on the previous translation mode we were running. Fixes: fe036a0605d60 ("powerpc/64/kexec: Fix MMU cleanup on radix") Cc: stable@vger.kernel.org # v4.9+ Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-23powerpc/optprobes: Fix TOC handling in optprobes trampolineNaveen N. Rao
Optprobes on powerpc are limited to kernel text area. We decided to also optimize kretprobe_trampoline since that is also in kernel text area. However,we failed to take into consideration the fact that the same trampoline is also used to catch function returns from kernel modules. As an example: $ sudo modprobe kobject-example $ sudo bash -c "echo 'r foo_show+8' > /sys/kernel/debug/tracing/kprobe_events" $ sudo bash -c "echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable" $ sudo cat /sys/kernel/debug/kprobes/list c000000000041350 k kretprobe_trampoline+0x0 [OPTIMIZED] d000000000e00200 r foo_show+0x8 kobject_example $ cat /sys/kernel/kobject_example/foo Segmentation fault With the below (trimmed) splat in dmesg: Unable to handle kernel paging request for data at address 0xfec40000 Faulting instruction address: 0xc000000000041540 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000041540] optimized_callback+0x70/0xe0 LR [c000000000041e60] optinsn_slot+0xf8/0x10000 Call Trace: [c0000000c7327850] [c000000000289af4] alloc_set_pte+0x1c4/0x860 (unreliable) [c0000000c7327890] [c000000000041e60] optinsn_slot+0xf8/0x10000 --- interrupt: 700 at 0xc0000000c7327a80 LR = kretprobe_trampoline+0x0/0x10 [c0000000c7327ba0] [c0000000003a30d4] sysfs_kf_seq_show+0x104/0x1d0 [c0000000c7327bf0] [c0000000003a0bb4] kernfs_seq_show+0x44/0x60 [c0000000c7327c10] [c000000000330578] seq_read+0xf8/0x560 [c0000000c7327cb0] [c0000000003a1e64] kernfs_fop_read+0x194/0x260 [c0000000c7327d00] [c0000000002f9954] __vfs_read+0x44/0x1a0 [c0000000c7327d90] [c0000000002fb4cc] vfs_read+0xbc/0x1b0 [c0000000c7327de0] [c0000000002fd138] SyS_read+0x68/0x110 [c0000000c7327e30] [c00000000000b8e0] system_call+0x38/0xfc Fix this by loading up the kernel TOC before calling into the kernel. The original TOC gets restored as part of the usual pt_regs restore. Fixes: 762df10bad69 ("powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-22f2fs: avoid needless checkpoint in f2fs_trim_fsJaegeuk Kim
The f2fs_trim_fs() doesn't need to do checkpoint if there are newly allocated data blocks only which didn't change the critical checkpoint data such as nat and sit entries. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-22net/dccp: fix use after free in tw_timer_handler()Andrey Ryabinin
DCCP doesn't purge timewait sockets on network namespace shutdown. So, after net namespace destroyed we could still have an active timer which will trigger use after free in tw_timer_handler(): BUG: KASAN: use-after-free in tw_timer_handler+0x4a/0xa0 at addr ffff88010e0d1e10 Read of size 8 by task swapper/1/0 Call Trace: __asan_load8+0x54/0x90 tw_timer_handler+0x4a/0xa0 call_timer_fn+0x127/0x480 expire_timers+0x1db/0x2e0 run_timer_softirq+0x12f/0x2a0 __do_softirq+0x105/0x5b4 irq_exit+0xdd/0xf0 smp_apic_timer_interrupt+0x57/0x70 apic_timer_interrupt+0x90/0xa0 Object at ffff88010e0d1bc0, in cache net_namespace size: 6848 Allocated: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x180 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x134/0x310 copy_net_ns+0x8d/0x280 create_new_namespaces+0x23f/0x340 unshare_nsproxy_namespaces+0x75/0xf0 SyS_unshare+0x299/0x4f0 entry_SYSCALL_64_fastpath+0x18/0xad Freed: save_stack_trace+0x1b/0x20 kasan_slab_free+0xae/0x180 kmem_cache_free+0xb4/0x350 net_drop_ns+0x3f/0x50 cleanup_net+0x3df/0x450 process_one_work+0x419/0xbb0 worker_thread+0x92/0x850 kthread+0x192/0x1e0 ret_from_fork+0x2e/0x40 Add .exit_batch hook to dccp_v4_ops()/dccp_v6_ops() which will purge timewait sockets on net namespace destruction and prevent above issue. Fixes: f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22uapi: fix linux/if.h userspace compilation errorsDmitry V. Levin
Include <sys/socket.h> (guarded by ifndef __KERNEL__) to fix the following linux/if.h userspace compilation errors: /usr/include/linux/if.h:234:19: error: field 'ifru_addr' has incomplete type struct sockaddr ifru_addr; /usr/include/linux/if.h:235:19: error: field 'ifru_dstaddr' has incomplete type struct sockaddr ifru_dstaddr; /usr/include/linux/if.h:236:19: error: field 'ifru_broadaddr' has incomplete type struct sockaddr ifru_broadaddr; /usr/include/linux/if.h:237:19: error: field 'ifru_netmask' has incomplete type struct sockaddr ifru_netmask; /usr/include/linux/if.h:238:20: error: field 'ifru_hwaddr' has incomplete type struct sockaddr ifru_hwaddr; This also fixes userspace compilation of the following uapi headers: linux/atmbr2684.h linux/gsmmux.h linux/if_arp.h linux/if_bonding.h linux/if_frad.h linux/if_pppox.h linux/if_tunnel.h linux/netdevice.h linux/route.h linux/wireless.h As no uapi header provides a definition of struct sockaddr, inclusion of <sys/socket.h> seems to be the most conservative and the only safe fix available. All current users of <linux/if.h> are very likely to be including <sys/socket.h> already because the latter is the sole provider of struct sockaddr definition in libc, so adding a uapi header with a definition of struct sockaddr would create a potential conflict with <sys/socket.h>. Replacing struct sockaddr in the definition of struct ifreq with a different type would create a potential incompatibility with current users of struct ifreq who might rely on ifru_addr et al members being of type struct sockaddr. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22l2tp: Avoid schedule while atomic in exit_netRidge Kennedy
While destroying a network namespace that contains a L2TP tunnel a "BUG: scheduling while atomic" can be observed. Enabling lockdep shows that this is happening because l2tp_exit_net() is calling l2tp_tunnel_closeall() (via l2tp_tunnel_delete()) from within an RCU critical section. l2tp_exit_net() takes rcu_read_lock_bh() << list_for_each_entry_rcu() >> l2tp_tunnel_delete() l2tp_tunnel_closeall() __l2tp_session_unhash() synchronize_rcu() << Illegal inside RCU critical section >> BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, pid: 86, name: kworker/u16:2 INFO: lockdep is turned off. CPU: 2 PID: 86 Comm: kworker/u16:2 Tainted: G W O 4.4.6-at1 #2 Hardware name: Xen HVM domU, BIOS 4.6.1-xs125300 05/09/2016 Workqueue: netns cleanup_net 0000000000000000 ffff880202417b90 ffffffff812b0013 ffff880202410ac0 ffffffff81870de8 ffff880202417bb8 ffffffff8107aee8 ffffffff81870de8 0000000000000c51 0000000000000000 ffff880202417be0 ffffffff8107b024 Call Trace: [<ffffffff812b0013>] dump_stack+0x85/0xc2 [<ffffffff8107aee8>] ___might_sleep+0x148/0x240 [<ffffffff8107b024>] __might_sleep+0x44/0x80 [<ffffffff810b21bd>] synchronize_sched+0x2d/0xe0 [<ffffffff8109be6d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8105c7bb>] ? __local_bh_enable_ip+0x6b/0xc0 [<ffffffff816a1b00>] ? _raw_spin_unlock_bh+0x30/0x40 [<ffffffff81667482>] __l2tp_session_unhash+0x172/0x220 [<ffffffff81667397>] ? __l2tp_session_unhash+0x87/0x220 [<ffffffff8166888b>] l2tp_tunnel_closeall+0x9b/0x140 [<ffffffff81668c74>] l2tp_tunnel_delete+0x14/0x60 [<ffffffff81668dd0>] l2tp_exit_net+0x110/0x270 [<ffffffff81668d5c>] ? l2tp_exit_net+0x9c/0x270 [<ffffffff815001c3>] ops_exit_list.isra.6+0x33/0x60 [<ffffffff81501166>] cleanup_net+0x1b6/0x280 ... This bug can easily be reproduced with a few steps: $ sudo unshare -n bash # Create a shell in a new namespace # ip link set lo up # ip addr add 127.0.0.1 dev lo # ip l2tp add tunnel remote 127.0.0.1 local 127.0.0.1 tunnel_id 1 \ peer_tunnel_id 1 udp_sport 50000 udp_dport 50000 # ip l2tp add session name foo tunnel_id 1 session_id 1 \ peer_session_id 1 # ip link set foo up # exit # Exit the shell, in turn exiting the namespace $ dmesg ... [942121.089216] BUG: scheduling while atomic: kworker/u16:3/13872/0x00000200 ... To fix this, move the call to l2tp_tunnel_closeall() out of the RCU critical section, and instead call it from l2tp_tunnel_del_work(), which is running from the l2tp_wq workqueue. Fixes: 2b551c6e7d5b ("l2tp: close sessions before initiating tunnel delete") Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0."Stephen Rothwell
When the firmware interface spec was updated, a constant element was renamed. The rename missed the instances in the bnxt_re driver because it wasn't upstream yet. This updates the bnxt_re driver with the rename. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-22qlogic: netxen: constify bin_attribute structuresBhumika Goyal
Declare bin_attribute structures as const as they are only passed as an arguments to the functions device_remove_bin_file and device_create_bin_file. These function arguments are of type const, so bin_attribute structures having this property can be made const too. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct bin_attribute i@p = {...}; @ok1@ identifier r1.i; position p,p1; @@ ( device_remove_bin_file(...,&i@p) | device_create_bin_file(..., &i@p1) ) @bad@ position p!={r1.p,ok1.p,ok1.p1}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct bin_attribute i; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22qlogic: qlcnic_sysfs: constify bin_attribute structuresBhumika Goyal
Declare bin_attribute structures as const as they are only passed as an arguments to the functions device_remove_bin_file and device_create_bin_file. These function arguments are of type const, so bin_attribute structures having this property can be made const too. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct bin_attribute i@p = {...}; @ok1@ identifier r1.i; position p,p1; @@ ( device_remove_bin_file(...,&i@p) | device_create_bin_file(..., &i@p1) ) @bad@ position p!={r1.p,ok1.p,ok1.p1}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct bin_attribute i; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22net: emac: add support for device-tree based PHY discovery and setupChristian Lamparter
This patch adds glue-code that allows the EMAC driver to interface with the existing dt-supported PHYs in drivers/net/phy. Because currently, the emac driver maintains a small library of supported phys for in a private phy.c file located in the drivers directory. The support is limited to mostly single ethernet transceiver like the: CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035. However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W) have a 5-port switch (AR8327N) attached to the EMAC. The switch chip is supported by the qca8k mdio driver, which uses the generic phy library. Another reason is that PHYLIB also supports the BCM54610, which was used for the Western Digital My Book Live. This will now also make EMAC select PHYLIB. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22rdma_cm: fail iwarp accepts w/o connection paramsSteve Wise
cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by: Shaobo He <shaobo@cs.utah.edu> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-22nvme-rdma: add support for host_traddrMax Gurtovoy
This will enable the user to control the specific interface for connection establishment in case the host has more than 1 interface under the same subnet. E.g: Host interfaces configured as: - ib0 1.1.1.1/16 - ib1 1.1.1.2/16 Target interfaces configured as: - ib0 1.1.1.3/16 (listener interface) - ib1 1.1.1.4/16 the following connect command will go through host iface ib0 (default): nvme connect -t rdma -n testsubsystem -a 1.1.1.3 -s 1023 but the following command will go through host iface ib1: nvme connect -t rdma -n testsubsystem -a 1.1.1.3 -s 1023 -w 1.1.1.2 Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvmet-rdma: Fix error handlingChristophe JAILLET
According to the preceeding goto, it is likely that 'out_destroy_sq' was expected here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvmet-rdma: use nvme cm status helperMax Gurtovoy
Also remove redundant debug prints. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme-rdma: move nvme cm status helper to .h fileMax Gurtovoy
This will enable the usage for nvme rdma target. Also move from a lookup array to a switch statement. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme-fc: don't bother to validate ioccsz and iorcszJames Smart
Discovery controllers don't set the values. They are in reserved areas of the Identify Controller data structure. Given the cmd completed, the minimal capsule sizes are supported, so no need to check nqn to detect discovery controllers and special case validations. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme/pci: No special case for queue busy on IOKeith Busch
This driver previously required we have a special check for IO submitted to nvme IO queues that are temporarily suspended. That is no longer necessary since blk-mq provides a quiesce, so any IO that actually gets submitted to such a queue must be ended since the queue isn't going to start back up. This is fixing a condition where we have fewer IO queues after a controller reset. This may happen if the number of CPU's has changed, or controller firmware update changed the queue count, for example. While it may be possible to complete the IO on a different queue, the block layer does not provide a way to resubmit a request on a different hardware context once the request has entered the queue. We don't want these requests to be stuck indefinitely either, so ending them in error is our only option at the moment. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme/core: Fix race kicking freed request_queueKeith Busch
If a namespace has already been marked dead, we don't want to kick the request_queue again since we may have just freed it from another thread. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme/pci: Disable on removal when disconnectedKeith Busch
If the device is not present, the driver should disable the queues immediately. Prior to this, the driver was relying on the watchdog timer to kill the queues if requests were outstanding to the device, and that just delays removal up to one second. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: Enable autonomous power state transitionsAndy Lutomirski
NVMe devices can advertise multiple power states. These states can be either "operational" (the device is fully functional but possibly slow) or "non-operational" (the device is asleep until woken up). Some devices can automatically enter a non-operational state when idle for a specified amount of time and then automatically wake back up when needed. The hardware configuration is a table. For each state, an entry in the table indicates the next deeper non-operational state, if any, to autonomously transition to and the idle time required before transitioning. This patch teaches the driver to program APST so that each successive non-operational state will be entered after an idle time equal to 100% of the total latency (entry plus exit) associated with that state. The maximum acceptable latency is controlled using dev_pm_qos (e.g. power/pm_qos_latency_tolerance_us in sysfs); non-operational states with total latency greater than this value will not be used. As a special case, setting the latency tolerance to 0 will disable APST entirely. On hardware without APST support, the sysfs file will not be exposed. The latency tolerance for newly-probed devices is set by the module parameter nvme_core.default_ps_max_latency_us. In theory, the device can expose "default" APST table, but this doesn't seem to function correctly on my device (Samsung 950), nor does it seem particularly useful. There is also an optional mechanism by which a configuration can be "saved" so it will be automatically loaded on reset. This can be configured from userspace, but it doesn't seem useful to support in the driver. On my laptop, enabling APST seems to save nearly 1W. The hardware tables can be decoded in userspace with nvme-cli. 'nvme id-ctrl /dev/nvmeN' will show the power state table and 'nvme get-feature -f 0x0c -H /dev/nvme0' will show the current APST configuration. This feature is quirked off on a known-buggy Samsung device. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: Add a quirk mechanism that uses identify_ctrlAndy Lutomirski
Currently, all NVMe quirks are based on PCI IDs. Add a mechanism to define quirks based on identify_ctrl's vendor id, model number, and/or firmware revision. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: make nvmf_register_transport require a create_ctrl callbackJohannes Thumshirn
nvmf_create_ctrl() relys on the presence of a create_crtl callback in the registered nvmf_transport_ops, so make nvmf_register_transport require one. Update the available call-sites as well to reflect these changes. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: Use CNS as 8-bit field and avoid endianness conversionParav Pandit
This patch defines CNS field as 8-bit field and avoids cpu_to/from_le conversions. Also initialize nvme_command cns value explicitly to NVME_ID_CNS_NS for readability (don't rely on the fact that NVME_ID_CNS_NS = 0). Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: add semicolon in nvme_command settingMax Gurtovoy
Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvmet: avoid dereferencing nvmet_reqMax Gurtovoy
No need to dereference req twice to get the cmd when we already have it stored in a local variable. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: Make controller state visible via sysfsSagi Grimberg
Easier for debugging and testing state machine transitions. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvmet: Make cntlid globally uniqueSagi Grimberg
We usually log the cntlid which is confusing in case we have multiple subsystems each with it's own cntlid ida. Instead make cntlid ida globally unique and log the initial association. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvmet_fc: cleanup of abort flag processing in fcp_op_doneJames Smart
Cleanup of abort flag processing in fcp_op_done. References were unnecessary Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22nvme: admin-cmd: fix spelling mistake: "Counld" -> "Could"Colin Ian King
trivial fix to spelling mistake in pr_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22block: get rid of blk-mq default scheduler choice Kconfig entriesJens Axboe
The wording in the entries were poor and not understandable by even deities. Kill the selection for default block scheduler, and impose a policy with sane defaults. Architected-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-22Merge tag 'tty-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver patchset for 4.11-rc1. Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer). The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.) All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits) tty: pl011: Work around QDF2400 E44 stuck BUSY bit atmel_serial: Use the fractional divider when possible tty: Remove extra include in HVC console tty framework serial: exar: Enable MSI support serial: exar: Move register defines from uapi header to consumer site serial: pci: Remove unused pci_boards entries serial: exar: Move Commtech adapters to 8250_exar as well serial: exar: Fix feature control register constants serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix mapping of port I/O resources serial: sh-sci: fix hardware RX trigger level setting tty/serial: atmel: ensure state is restored after suspending serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt serdev: ttyport: check whether tty_init_dev() fails serial: 8250_pci: make pciserial_detach_ports() static ARM: dts: STiH410-b2260: Enable HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH410-b2260: Identify the UART RTS line dt-bindings: serial: Update 'uart-has-rtscts' description ...
2017-02-22Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to ↵Trond Myklebust
OP_SEQUENCE" This reverts commit 2cf10cdd486c362f983abdce00dc1127e8ab8c59. The patch has been seen to cause excessive looping. Reported-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # 4.10+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-22Merge tag 'staging-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio driver updates from Greg KH: "Here is the big staging and iio driver patchsets for 4.11-rc1. We almost broke even this time around, with only a few thousand lines added overall, as we removed the old and obsolete i4l code, but added some new drivers for the RPi platform, as well as adding some new IIO drivers. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits) Staging: vc04_services: Fix the "space prohibited" code style errors Staging: vc04_services: Fix the "wrong indent" code style errors staging: octeon: Use net_device_stats from struct net_device Staging: rtl8192u: ieee80211: ieee80211.h - style fix Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix Staging: rtl8192u: r8192U.h - style fix Staging: rtl8192u: r8192U_core.c - style fix Staging: rtl8192u: r819xU_cmdpkt.c - style fix staging: rtl8192u: blank lines aren't necessary before a close brace '}' staging: rtl8192u: Adding space after enum and struct definition staging: rtl8192u: Adding space after struct definition Staging: ks7010: Add required and preferred spaces around operators Staging: ks7010: ks*: Remove redundant blank lines Staging: ks7010: ks*: Add missing blank lines after declarations staging: visorbus, replace init_timer with setup_timer staging: vt6656: rxtx.c Removed multiple dereferencing staging: vt6656: Alignment match open parenthesis ...
generated by cgit (git 2.34.1) at 2025-09-15 12:08:54 +0000