summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-31clocksource: timer-riscv: Increase rating of clock_event_device for SstcAnup Patel
When Sstc is available the RISC-V timer clock_event_device should be the preferred clock_event_device hence we increase clock_event_device rating for Sstc. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230710131902.1459180-3-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31clocksource: timer-riscv: Don't enable/disable timer interruptAnup Patel
Currently, we enable/disable timer interrupt at runtime to start/stop timer events. This makes timer interrupt state go out-of-sync with the Linux interrupt subsystem. To address the above issue, we can stop a per-HART timer interrupt by setting U64_MAX in timecmp CSR (or sbi_set_timer()) at the time of handling timer interrupt. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230710131902.1459180-2-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge patch series "RISC-V: Enable cbo.zero in usermode"Palmer Dabbelt
Andrew Jones <ajones@ventanamicro.com> says: In order for usermode to issue cbo.zero, it needs privilege granted to issue the extension instruction (patch 2) and to know that the extension is available and its block size (patch 3). Patch 1 could be separate from this series (it just fixes up some error messages), patches 4-5 convert the hwprobe selftest to a statically-linked, TAP test and patch 6 adds a new hwprobe test for the new information as well as testing CBO instructions can or cannot be issued as appropriate. * b4-shazam-merge: RISC-V: selftests: Add CBO tests RISC-V: selftests: Convert hwprobe test to kselftest API RISC-V: selftests: Statically link hwprobe test RISC-V: hwprobe: Expose Zicboz extension and its block size RISC-V: Enable cbo.zero in usermode RISC-V: Make zicbom/zicboz errors consistent Link: https://lore.kernel.org/r/20230918131518.56803-8-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge patch series "riscv: kexec: cleanup and fixups"Palmer Dabbelt
Song Shuai <songshuaishuai@tinylab.org> says: This series contains a cleanup for riscv_kexec_relocate() and two fixups for KEXEC_FILE and had passed the basic kexec test in my 64bit Qemu-virt. You can use this kexec-tools[3] to test the kexec-file-syscall and these patches. riscv: kexec: Cleanup riscv_kexec_relocate (patch1) ================================================== For readability and simplicity, cleanup the riscv_kexec_relocate code: - Re-sort the first 4 `mv` instructions against `riscv_kexec_method()` - Eliminate registers for debugging (s9,s10,s11) and storing const-value (s5,s6) - Replace `jalr` with `jr` for no-link jump riscv: kexec: Align the kexeced kernel entry (patch2) ================================================== The current riscv boot protocol requires 2MB alignment for RV64 and 4MB alignment for RV32. In KEXEC_FILE path, the elf_find_pbase() function should align the kexeced kernel entry according to the requirement, otherwise the kexeced kernel would silently BUG at the setup_vm(). riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS (patch3) ================================================== With CONFIG_RELOCATABLE enabled, KBUILD_CFLAGS had a -fPIE option and then the purgatory/string.o was built to reference _ctype symbol via R_RISCV_GOT_HI20 relocations which can't be handled by purgatory. As a consequence, the kernel failed kexec_load_file() with: [ 880.386562] kexec_image: The entry point of kernel at 0x80200000 [ 880.388650] kexec_image: Unknown rela relocation: 20 [ 880.389173] kexec_image: Error loading purgatory ret=-8 So remove the -fPIE option for PURGATORY_CFLAGS to generate R_RISCV_PCREL_HI20 relocations type making puragtory work as it was. arch/riscv/kernel/elf_kexec.c | 8 ++++- arch/riscv/kernel/kexec_relocate.S | 52 +++++++++++++----------------- arch/riscv/purgatory/Makefile | 4 +++ 3 files changed, 34 insertions(+), 30 deletions(-) * b4-shazam-merge: riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS riscv: kexec: Align the kexeced kernel entry riscv: kexec: Cleanup riscv_kexec_relocate Link: https://lore.kernel.org/r/20230907103304.590739-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge tag 'pm-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add new hardware support (new Qualcomm SoC versions in cpufreq, RK3568/RK3588 in devfreq), extend the OPP (operating performance points) framework, improve cpufreq governors, fix issues and clean up code (most of the changes are in cpufreq and devfreq). Specifics: - Add support for several Qualcomm SoC versions and other similar changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan Gerhold and Varadarajan Narayanan) - Clean up the tegra cpufreq driver (Sumit Gupta) - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring) - Add support for TI's am62p5 Soc (Bryan Brattlof) - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian Fainelli) - Update Kconfig to mention i.MX7 as well (Alexander Stein) - Revise global turbo disable check in intel_pstate (Srinivas Pandruvada) - Carry out initialization of sg_cpu in the schedutil cpufreq governor in one loop (Liao Chang) - Simplify the condition for storing 'down_threshold' in the conservative cpufreq governor (Liao Chang) - Use fine-grained mutex in the userspace cpufreq governor (Liao Chang) - Move is_managed indicator in the userspace cpufreq governor into a per-policy structure (Liao Chang) - Rebuild sched-domains when removing cpufreq driver (Pierre Gondois) - Fix buffer overflow detection in trans_stats() (Christian Marangi) - Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support specific devices like UFS which handle multiple clocks through OPP (Operating Performance Point) framework (Manivannan Sadhasivam) - Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq- event driver: * Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type (Sascha Hauer). * Convert DT binding document format to yaml (Sascha Hauer). * Add perf support for DFI (a unit suitable for measuring DDR utilization) to rockchip-dfi.c to extend DFI usage (Sascha Hauer) - Add locking to the OPP handling code in the Mediatek CCI devfreq driver, because the voltage of shared OPP might be changed by multiple drivers (Mark Tseng, Dan Carpenter) - Use device_get_match_data() in the Samsung Exynos PPMU devfreq-event driver (Rob Herring) - Extend support for the opp-level beyond required-opps (Ulf Hansson) - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru) - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi) - Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan Chancellor) - General cleanup of OPP code (Viresh Kumar) - Use __get_safe_page() rather than touching the list in hibernation snapshot code (Brian Geffon) - Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav) - Clean up sync_read handling in snapshot_write_next() (Brian Geffon) - Fix kerneldoc comments for swsusp_check() and swsusp_close() to better match code (Christoph Hellwig) - Downgrade BIOS locked limits pr_warn() in the Intel RAPL power capping driver to pr_debug() (Ville Syrjälä) - Change the minimum python version for the intel_pstate_tracer utility from 2.7 to 3.6 (Doug Smythies)" * tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits) dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: drop pvs_ver for format a fuses dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for IPQ6018 dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 cpufreq: qcom-nvmem: Add MSM8909 cpufreq: qcom-nvmem: Simplify driver data allocation powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug() cpufreq: stats: Fix buffer overflow detection in trans_stats() dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml PM / devfreq: rockchip-dfi: add support for RK3588 PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers PM / devfreq: rockchip-dfi: make register stride SoC specific PM / devfreq: rockchip-dfi: Add perf support PM / devfreq: rockchip-dfi: give variable a better name ...
2023-10-31Merge tag 'acpi-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These fix issues, add new quirks, rearrange the IRQ override quirk definitions, add new helpers and switch over code to using them, rework a couple of interfaces to be more flexible, eliminate strncpy() usage from PNP, extend the ACPI PCC mailbox driver and clean up code. This is based on ACPI thermal driver changes that are present in the thermal control updates for 6.7-rc1 pull request (they are depended on by the ACPI utilities updates). However, the ACPI thermal driver changes are not included in the list of specific ACPI changes below. Specifics: - Add symbol definitions related to CDAT to the ACPICA code (Dave Jiang) - Use the acpi_device_is_present() helper in more places and rename acpi_scan_device_not_present() to be about enumeration (James Morse) - Add __printf format attribute to acpi_os_vprintf() (Su Hui) - Clean up departures from kernel coding style in the low-level interface for ACPICA (Jonathan Bergh) - Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt) - Fail FPDT parsing on zero length records and add proper handling for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick) - Rework acpi_handle_list handling so as to manage it dynamically, including size computation (Rafael Wysocki) - Clean up ACPI utilities code so as to make it follow the kernel coding style (Jonathan Bergh) - Consolidate IRQ trigger-type override DMI tables and drop .ident values from dmi_system_id tables used for ACPI resources management quirks (Hans de Goede) - Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach) - Allow _DSD buffer data only for byte accessors and document the _DSD data buffer GUID (Andy Shevchenko) - Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS driver, because it does not need them (Raag Jadav) - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej Zary) - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans de Goede) - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de Goede) - Annotate struct prm_module_info with __counted_by (Kees Cook) - Fix AER info corruption in aer_recover_queue() when error status data has multiple sections (Shiju Jose) - Make APEI use ERST maximum execution time for slow devices (Jeshua Smith) - Add support for platform notification handling to the PCC mailbox driver and modify it to support shared interrupts for multiple subspaces (Huisong Li) - Define common macros to use when referring to various bitfields in the PCC generic communications channel command and status fields and use them in some drivers (Sudeep Holla) - Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan Denose) - Fix and clean up create_pnp_modalias() and create_of_modalias() (Christophe JAILLET) - Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy Shevchenko) - Define acpi_dev_uid_match() for matching _UID and use it in several places (Raag Jadav) - Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav) - Add context argument to acpi_dev_install_notify_handler() (Rafael Wysocki) - Clarify ACPI bus concepts in the ACPI device enumeration documentation (Rafael Wysocki) - Switch over the ACPI AC and ACPI PAD drivers to using the platform driver interface which, is more logically consistent than binding a driver directly to an ACPI device object, and clean them up (Michal Wilczynski) - Replace strncpy() in the PNP code with either memcpy() or strscpy() as appropriate (Justin Stitt) - Clean up coding style in pnp.h (GuoHua Cheng)" * tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits) ACPI: resource: Do IRQ override on TongFang GMxXGxx perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID ACPI: EC: Add quirk for HP 250 G7 Notebook PC ACPI: x86: use acpi_dev_uid_match() for matching _UID ACPI: utils: use acpi_dev_uid_match() for matching _UID pinctrl: intel: use acpi_dev_uid_match() for matching _UID ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias() ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias() ACPI: acpi_pad: Rename ACPI device from device to adev ACPI: acpi_pad: Use dev groups for sysfs ACPI: acpi_pad: Replace acpi_driver with platform_driver ACPI: APEI: Use ERST timeout for slow devices ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration PNP: replace deprecated strncpy() with memcpy() PNP: ACPI: replace deprecated strncpy() with strscpy() perf: qcom: use acpi_device_uid() for fetching _UID ACPI: sysfs: use acpi_device_uid() for fetching _UID ACPI: scan: Use the acpi_device_is_present() helper in more places ACPI: AC: Rename ACPI device from device to adev ...
2023-10-31Merge tag 'thermal-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These further rework the ACPI thermal driver, after the changes made to it in the previous cycle, to make it easier to grasp, get rid of redundant pieces of internal data structures and eliminate its reliance on a specific ordering of trip point objects in the thermal core, make thermal core adjustments needed for the ACPI thermal driver rework, modify the thermal governor interface so as to use trip pointers for representing trip points in it, switch over multiple thermal drivers to using void platform driver remove callbacks, add support for 2 hardware features to the Intel int340x thermal driver, add support for new hardware on ARM platforms, update documentation, fix problems, clean up code and update the MAINTAINERS record for thermal control. Specifics: - Untangle the initialization and updates of passive and active trip points in the ACPI thermal driver (Rafael Wysocki) - Reduce code duplication related to the initialization and updates of trip points in the ACPI thermal driver (Rafael Wysocki) - Use trip pointers for cooling device binding in the ACPI thermal driver (Rafael Wysocki) - Simplify critical and hot trips representation in the ACPI thermal driver (Rafael Wysocki) - Use trip pointers in thermal governors and in the related part of the thermal core (Rafael Wysocki) - Drop the trips_disabled bitmask that has become redundant from the thermal core (Rafael Wysocki) - Avoid updating trip points when the thermal zone temperature falls into a trip point's hysteresis range (ícolas F. R. A. Prado) - Add power floor notifications support to the int340x thermal control driver (Srinivas Pandruvada) - Rework updating trip points in the int340x thermal driver so that it does not access thermal zone internals directly (Rafael Wysocki) - Use param_get_byte() instead of param_get_int() as the max_idle module parameter .get() callback in the Intel powerclamp thermal driver to avoid possible out-of-bounds access (David Arcari) - Add workload hints support to the int340x thermal driver (Srinivas Pandruvada) - Add support for Mediatek LVTS MT8192 along with suspend/resume routines (Balsam Chihi) - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus Schneider-Pargmann) - Remove duplicate error message from the max76620 driver when thermal_of_zone_register() fails (Thierry Reding) - Add i.MX7D compatible bindings to fix a warning from dtbs_check for the imx6ul platform (Alexander Stein) - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain) - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in the LVTS Mediatek driver (Minjie Du) - Remove unused variable in thermal/tools (Kuan-Wei Chiu) - Document the imx8dl thermal sensor (Fabio Estevam) - Add variable names in callback prototypes to prevent warning from checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel) - Add missing unevaluatedProperties on child node schemas for tegra124 (Rob Herring) - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)" * tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits) thermal: ACPI: Include the right header file thermal: core: Don't update trip points inside the hysteresis range thermal: core: Pass trip pointer to governor throttle callback thermal: gov_step_wise: Fold update_passive_instance() into its caller thermal: gov_power_allocator: Use trip pointers instead of trip indices thermal: gov_fair_share: Rearrange get_trip_level() thermal: trip: Define for_each_trip() macro thermal: trip: Simplify computing trip indices thermal/qcom/tsens: Drop ops_v0_1 thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation thermal/drivers/mediatek/lvts_thermal: Add mt8192 support thermal/drivers/mediatek/lvts_thermal: Add suspend and resume dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 thermal/drivers/mediatek: Fix probe for THERMAL_V2 thermal/drivers/max77620: Remove duplicate error message dt-bindings: timer: add imx7d compatible dt-bindings: net: microchip: Allow nvmem-cell usage dt-bindings: imx-thermal: Add #thermal-sensor-cells property dt-bindings: thermal: tsens: Add sa8775p compatible thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init() ...
2023-10-31ext4: properly sync file size update after O_SYNC direct IOJan Kara
Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly sync file size update and thus if we crash at unfortunate moment, the file can have smaller size although O_SYNC IO has reported successful completion. The problem happens because update of on-disk inode size is handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus dio_complete() in particular) has returned and generic_file_sync() gets called by dio_complete(). Fix the problem by handling on-disk inode size update directly in our ->end_io completion handler. References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com> CC: stable@vger.kernel.org Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure") Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-10-31ext4: fix racy may inline data check in dio writeBrian Foster
syzbot reports that the following warning from ext4_iomap_begin() triggers as of the commit referenced below: if (WARN_ON_ONCE(ext4_has_inline_data(inode))) return -ERANGE; This occurs during a dio write, which is never expected to encounter an inode with inline data. To enforce this behavior, ext4_dio_write_iter() checks the current inline state of the inode and clears the MAY_INLINE_DATA state flag to either fall back to buffered writes, or enforce that any other writers in progress on the inode are not allowed to create inline data. The problem is that the check for existing inline data and the state flag can span a lock cycle. For example, if the ilock is originally locked shared and subsequently upgraded to exclusive, another writer may have reacquired the lock and created inline data before the dio write task acquires the lock and proceeds. The commit referenced below loosens the lock requirements to allow some forms of unaligned dio writes to occur under shared lock, but AFAICT the inline data check was technically already racy for any dio write that would have involved a lock cycle. Regardless, lift clearing of the state bit to the same lock critical section that checks for preexisting inline data on the inode to close the race. Cc: stable@kernel.org Reported-by: syzbot+307da6ca5cb0d01d581a@syzkaller.appspotmail.com Fixes: 310ee0902b8d ("ext4: allow concurrent unaligned dio overwrites") Signed-off-by: Brian Foster <bfoster@redhat.com> Link: https://lore.kernel.org/r/20231002185020.531537-1-bfoster@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-11-01Merge branch 'for-6.7/uclogic' into for-linusJiri Kosina
- fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic driver (Jinjie Ruan)
2023-11-01Merge branch 'for-6.7/selftests' into for-linusJiri Kosina
- HID selftests fixes and improvements (Benjamin Tissoires)
2023-11-01Merge branch 'for-6.7/nvidia-shield' into for-linusJiri Kosina
- probe error handling path fixes in hid-nvidia-shield driver (Christophe JAILLET)
2023-11-01Merge branch 'for-6.7/nintendo' into for-linusJiri Kosina
- cleanup of LED handling in hid-nintendo (Martino Fontana)
2023-11-01Merge branch 'for-6.7/logitech' into for-linusJiri Kosina
- big cleanup of logitech-hidpp probe code (Hans de Goede)
2023-11-01Merge branch 'for-6.7/lenovo' into for-linusJiri Kosina
- Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin) - firmware detection improvement for Lenovo cptkbd (Mikhail Khvainitski)
2023-11-01Merge branch 'for-6.7/cp2112' into for-linusJiri Kosina
- IRQ shutdown and workqueue initialization fixes for hid-cp2112 driver (Danny Kaehn)
2023-11-01Merge branch 'for-6.7/config_pm' into for-linusJiri Kosina
- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)
2023-10-31drm/amdgpu: remove unused macro HW_REVYang Wang
remove unused macro HW_REV Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amd/pm: Fix error of MACO flag setting codeMa Jun
MACO only works if BACO is supported Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-10-31drm/amdgpu: Fix the vram base start addressArunpravin Paneer Selvam
If the size returned by drm buddy allocator is higher than the required size, we take the higher size to calculate the buffer start address. This is required if we couldn't trim the buffer to the requested size. This will fix the display corruption issue on APU's which has limited VRAM size. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2859 Fixes: 0a1844bf0b53 ("drm/buddy: Improve contiguous memory allocation") Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31cxl/hdm: Remove broken error pathDan Williams
Dan reports that cxl_decoder_commit() potentially leaks a hold of cxl_dpa_rwsem. The potential error case is a "should not" happen scenario, turn it into a "can not" happen scenario by adding the error check to cxl_port_setup_targets() where other setting validation occurs. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: http://lore.kernel.org/r/63295673-5d63-4919-b851-3b06d48734c0@moroto.mountain Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-10-31drm/amdgpu: set XGMI IP version manually for v6_4Tao Zhou
The version can't be queried from discovery table. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31cxl/hdm: Fix && vs || bugDan Carpenter
If "info" is NULL then this code will crash. || was intended instead of &&. Fixes: 8ce520fdea24 ("cxl/hdm: Use stored Component Register mappings to map HDM decoder capability") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Robert Richter <rrichter@amd.com> Link: https://lore.kernel.org/r/60028378-d3d5-4d6d-90fd-f915f061e731@moroto.mountain Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-10-31drm/amdgpu: add unmap latency when gfx11 set kiq resourcesTong Liu01
[why] If driver does not set unmap latency for KIQ, the default value of KIQ unmap latency is zero. When do unmap queue, KIQ will return that almost immediately after receiving unmap command. So, the queue status will be saved to MQD incorrectly or lost in some chance. [how] Set unmap latency when do kiq set resources. The unmap latency is set to be 1 second that is synchronized with Windows driver. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amd/pm: fix the high voltage and temperature issueKenneth Feng
fix the high voltage and temperature issue after the driver is unloaded on smu 13.0.0, smu 13.0.7 and smu 13.0.10 v2 - fix the code format and make sure it is used on the unload case only. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amdgpu: remove amdgpu_mes_self_test in gpu recoverYifan Zhang
gpu tlb flush is skipped if reset sem is held, it makes mes_self_test fail since it involves add_hw_queue/remove_hw_queue which needs tlb flush functional. Remove mes_self_test in gpu recover sequence. This patch is to fix the recover failure in gfx11. [ 1831.768292] [drm] ring sdma_32769.3.3 was added [ 1831.768313] [drm] ring gfx_32769.1.1 ib test pass [ 1831.768337] [drm] ring compute_32769.2.2 ib test pass [ 1831.768399] amdgpu 0000:c2:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:24 vmid:8 pasid:32769, for process pid 0 thread pid 0) [ 1831.768434] amdgpu 0000:c2:00.0: amdgpu: in page starting at address 0x0000aec200000000 from client 10 [ 1831.768456] amdgpu 0000:c2:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00800A30 [ 1831.768473] amdgpu 0000:c2:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 1831.768489] amdgpu 0000:c2:00.0: amdgpu: MORE_FAULTS: 0x0 [ 1831.768501] amdgpu 0000:c2:00.0: amdgpu: WALKER_ERROR: 0x0 [ 1831.768513] amdgpu 0000:c2:00.0: amdgpu: PERMISSION_FAULTS: 0x3 [ 1831.768521] amdgpu 0000:c2:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 1831.768529] amdgpu 0000:c2:00.0: amdgpu: RW: 0x0 [ 1831.931229] amdgpu 0000:c2:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma_32769.3.3 test failed (-110) [ 1832.062917] [drm:mes_v11_0_submit_pkt_and_poll_completion.constprop.0 [amdgpu]] *ERROR* MES failed to response msg=3 [ 1832.063107] [drm:amdgpu_mes_remove_hw_queue [amdgpu]] *ERROR* failed to remove hardware queue, queue id = 3 Fixes: e2e3788850b9 ("drm/amdgpu: rework lock handling for flush_tlb v2") Reported-by: Li Ma <li.ma@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amdgpu: Drop deferred error in uncorrectable error checkCandice Li
Drop checking deferred error which can be handled by poison consumption. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amd/pm: Fix warningsLijo Lazar
Fixes warnings: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:286:45: warning: '%s' directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:286:52: warning: '%s' directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:72:45: warning: '%s' directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:72:52: warning: '%s' directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amdgpu: check RAS supported first in ras_reset_error_countTao Zhou
Not all platforms support RAS. Fixes: 73582be11ac8 ("drm/amdgpu: bypass RAS error reset in some conditions") Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31Merge tag 'kvmarm-6.7' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.7 - Generalized infrastructure for 'writable' ID registers, effectively allowing userspace to opt-out of certain vCPU features for its guest - Optimization for vSGI injection, opportunistically compressing MPIDR to vCPU mapping into a table - Improvements to KVM's PMU emulation, allowing userspace to select the number of PMCs available to a VM - Guest support for memory operation instructions (FEAT_MOPS) - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing bugs and getting rid of useless code - Changes to the way the SMCCC filter is constructed, avoiding wasted memory allocations when not in use - Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing the overhead of errata mitigations - Miscellaneous kernel and selftest fixes
2023-10-31net: tcp: remove call to obsolete crypto_ahash_alignmask()Stephen Rothwell
linux-next hit the following build error: net/ipv4/tcp_ao.c: In function 'tcp_ao_key_alloc': net/ipv4/tcp_ao.c:1536:13: error: implicit declaration of function 'crypto_ahash_alignmask'; did you mean 'crypto_ahash_alg_name'? [-Werror=implicit-function-declaration] 1536 | if (crypto_ahash_alignmask(tfm) > TCP_AO_KEY_ALIGN) { | ^~~~~~~~~~~~~~~~~~~~~~ | crypto_ahash_alg_name Caused by commit from the crypto tree 0f8660c82b79 ("crypto: ahash - remove crypto_ahash_alignmask") interacting with commit 4954f17ddefc ("net/tcp: Introduce TCP_AO setsockopt()s") from networking. crypto_ahash_alignmask() has been phased out by the former commit, drop the call in networking. Eric confirms that the check is safe to remove and was questionable here in the first place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-31dm crypt: account large pages in cc->n_allocated_pagesMikulas Patocka
The commit 5054e778fcd9c ("dm crypt: allocate compound pages if possible") changed dm-crypt to use compound pages to improve performance. Unfortunately, there was an oversight: the allocation of compound pages was not accounted at all. Normal pages are accounted in a percpu counter cc->n_allocated_pages and dm-crypt is limited to allocate at most 2% of memory. Because compound pages were not accounted at all, dm-crypt could allocate memory over the 2% limit. Fix this by adding the accounting of compound pages, so that memory consumption of dm-crypt is properly limited. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 5054e778fcd9c ("dm crypt: allocate compound pages if possible") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-10-31Merge branch 'for-6.7/cxl-commited' into cxl/nextDan Williams
Add the committed decoder sysfs attribute for v6.7.
2023-10-31Merge branch 'for-6.7/cxl' into cxl/nextDan Williams
Pickup some misc. CXL updates for v6.7.
2023-10-31Merge branch 'for-6.7/cxl-qtg' into cxl/nextDan Williams
Merge some prep-work for CXL QOS class support. This cycle saw large collisions with mm on this topic, so the bulk of this topic needs to wait.
2023-10-31Merge branch 'for-6.7/cxl-rch-eh' into cxl/nextDan Williams
Restricted CXL Host (RCH) Error Handling undoes the topology munging of CXL 1.1 to enabled some AER recovery, and lands some base infrastructure for handling Root-Complex-Event-Collectors (RCECs) with CXL. Include this long running series finally for v6.7.
2023-10-31cifs: add xid to query server interface callShyam Prasad N
We were passing 0 as the xid for the call to query server interfaces. This is not great for debugging. This change adds a real xid. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-31cifs: print server capabilities in DebugDataShyam Prasad N
In the output of /proc/fs/cifs/DebugData, we do not print the server->capabilities field today. With this change, we will do that. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-31smb: use crypto_shash_digest() in symlink_hash()Eric Biggers
Simplify symlink_hash() by using crypto_shash_digest() instead of an init+update+final sequence. This should also improve performance. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-31smb: client: fix use-after-free bug in cifs_debug_data_proc_show()Paulo Alcantara
Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-31smb: client: fix potential deadlock when releasing midsPaulo Alcantara
All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock* Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-31ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()Harshit Mogalapalli
When firmware status is invalid, assign -EINVAL to ret as ret is '0' at that point and returning success is incorrect when firmware status is invalid. Fixes: a51d8ba03a4f ("ALSA: hda: cs35l41: Check CSPL state after loading firmware") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20231030070836.3234385-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-10-31smb3: fix creating FIFOs when mounting with "sfu" mount optionSteve French
Fixes some xfstests including generic/564 and generic/157 The "sfu" mount option can be useful for creating special files (character and block devices in particular) but could not create FIFOs. It did recognize existing empty files with the "system" attribute flag as FIFOs but this is too general, so to support creating FIFOs more safely use a new tag (but the same length as those for char and block devices ie "IntxLNK" and "IntxBLK") "LnxFIFO" to indicate that the file should be treated as a FIFO (when mounted with the "sfu"). For some additional context note that "sfu" followed the way that "Services for Unix" on Windows handled these special files (at least for character and block devices and symlinks), which is different than newer Windows which can handle special files as reparse points (which isn't an option to many servers). Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-31ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanupDan Carpenter
The acpi_thermal_unregister_thermal_zone() is paired with acpi_thermal_register_thermal_zone() so it should mirror it. It should clean up all the resources that the register function allocated and leave the stuff that was allocated elsewhere. Unfortunately, it doesn't call thermal_zone_device_disable(). Also it calls kfree(tz->trip_table) when it shouldn't. That was allocated in acpi_thermal_add(). Putting the kfree() here leads to a double free in the acpi_thermal_add() clean up function. Likewise, the acpi_thermal_remove() should mirror acpi_thermal_add() so it should have an explicit kfree(tz->trip_table) as well. Fixes: ec23c1c462de ("ACPI: thermal: Use trip point table to register thermal zones") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-31bcachefs: bch2_inum_opts_get()Kent Overstreet
New helper for new rebalance code Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-10-31bcachefs: move: move_stats refactoringKent Overstreet
data_progress_list is gone - it was redundant with moving_context_list The upcoming rebalance rewrite is going to have it using two different move_stats objects with the same moving_context, depending on whether it's scanning or using the rebalance_work btree - this patch plumbs stats around a bit differently so that will work. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-10-31bcachefs: move: convert to bbposKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-10-31bcachefs: moving_context now owns a btree_transKent Overstreet
btree_trans and moving_context are used together, and having the moving_context owns the transaction object reduces some plumbing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-10-31bcachefs: move.c exports, refactoringKent Overstreet
Prep work for the new rebalance code - we need a few helpers exported. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-10-31bcachefs: Guard against unknown compression optionsKent Overstreet
Since compression options now include compression level, proper validation is a bit more involved. This adds bch2_compression_opt_valid(), and plumbs it around appropriately. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
generated by cgit (git 2.34.1) at 2025-09-14 13:54:52 +0000