| Age | Commit message (Collapse) | Author |
|---|
|
Legacy RQ allocates WQEs in batches. If the batch allocation fails, the
pages of the allocated part are released. This commit changes this
behavior to allow to use the pages that have been already allocated.
After this change, we need to be careful about indexing rq->wqe.frags[].
The WQ size is a power of two that divides by wqe_bulk (8), and the old
code used whole bulks, which allowed to use indices [8*K; 8*K+7] without
overflowing. Now that the bulks may be partial, the range can start at
any location (not only at 8*K), so we need to wrap them around to avoid
out-of-bounds array access.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The old calculation of wqe_index_mask may give false positives, i.e.
request bulking of pairs of WQEs when not strictly needed, for example,
when the first fragment size is equal to the PAGE_SIZE, bulking is not
needed, even if the number of fragments is odd.
Make the calculation more exact to cut false positives.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fragments of different WQEs share the same page, mlx5e_post_rx_wqes
must wait until the old WQE stops using the page, only then the new WQE
can allocate the new page. Essentially, it means that if WQE index i is
still in use, the allocation must stop before `i % bulk`, where bulk is
the number of WQEs that may share the same page.
As bulk is always a power of two, `i % bulk = i & (bulk - 1)`, and the
new wqe_index_mask field will be equal to `bulk - 1`.
At the same time, wqe_bulk remains for optimization purposes and stores
`max(bulk, 8)`, which allows to skip the allocation until we have at
least 8 WQEs free.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MLX5E_CHANNEL_STATE_XSK flag checked in mlx5e_xsk_wakeup indicates
that XSK queues are open, but not necessarily activated. This check is
not very useful, because:
0. Both XSK setup and netdev state transitions take the same state_lock
mutex, so they can't happen at the same time.
1. If the netdev is up, xsk_is_bound can return true only when
MLX5E_CHANNEL_STATE_XSK is set on the corresponding channel.
mlx5e_xsk_wakeup is only called when xsk_is_bound is true.
2. If the XSK socket is bound, and the netdev is going up or down,
mlx5e_xsk_wakeup can take one of two branches, depending on the return
value of napi_if_scheduled_mark_missed:
2.1. True means one of two things: either NAPI was enabled at this
point, which means MLX5E_CHANNEL_STATE_XSK was also set; or NAPI was
disabled, and nothing really happened.
2.2. False means that NAPI was enabled by this point, which also implies
MLX5E_CHANNEL_STATE_XSK was set. Additionally, mlx5e_xsk_wakeup contains
a following check for MLX5E_SQ_STATE_ENABLED on async_icosq, and this
flag implies MLX5E_CHANNEL_STATE_XSK too on XSK channels.
As checking this flag doesn't cut any flows, remove the check.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_xsk_wakeup triggers an IRQ by posting a NOP to async_icosq, taking
a spinlock to protect from concurrent access. There is already a
function that does the same: mlx5e_trigger_napi_icosq. Use this function
in mlx5e_xsk_wakeup.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some tiny USB and Thunderbolt driver fixes and quirks.
Included in here are:
- three uas/usb-storage driver quirks to get the devices working
properly due to broken firmware images in them (they can not run at
high data rates, and are also throttled on other operating systems
because of this)
- thunderbolt bugfix for plug event delays
- typec runtime warning removal
- dwc3 st driver bugfix. Note, a follow-on fix for this will end up
coming in for 6.1-rc1 as the developers are still arguing over what
the final solution will be, but this should be sufficient for now
All of these have been in linux-next with no reported problems"
* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
uas: ignore UAS for Thinkplus chips
usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
uas: add no-uas quirk for Hiksemi usb_disk
usb: dwc3: st: Fix node's child name
usb: typec: ucsi: Remove incorrect warning
thunderbolt: Explicitly reset plug events delay back to USB4 spec value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for the v4l2 ioctl handler logic
- a fix for an out of bound access in the DVB videobuf2 handler
- three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)
* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"One MAINTAINERS update, two MM fixes, both cc:stable"
The previous pull wasn't fated to be the last one..
* tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
damon/sysfs: fix possible memleak on damon_sysfs_add_target
mm: fix BUG splat with kvmalloc + GFP_ATOMIC
MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE
|
|
This patch switches the driver from legacy gpio API to the newer
gpiod API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Nearly all other firmware environments have some way of passing a RNG
seed to initialize the RNG: DTB's rng-seed, EFI's RNG protocol, m68k's
bootinfo block, x86's setup_data, and so forth. This adds something
similar for MIPS, which will allow various firmware environments,
bootloaders, and hypervisors to pass an RNG seed to initialize the
kernel's RNG.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Delete misformatted table.
Fixes: 6166da0a02cd ("bpf, docs: Move legacy packet instructions to a separate file")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We enable -Wcast-function-type globally in the kernel to warn about
mismatching types in function pointer casts. Compilers currently
warn only about ABI incompability with this flag, but Clang 16 will
enable a stricter version of the check by default that checks for an
exact type match. This will be very noisy in the kernel, so disable
-Wcast-function-type-strict without W=1 until the new warnings have
been addressed.
Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D134831
Link: https://github.com/ClangBuiltLinux/linux/issues/1724
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220930203310.4010564-1-samitolvanen@google.com
|
|
Hans reported that his Sony VAIO VPX11S1E showed the broken sound
behavior at the start of the stream for a couple of seconds, and it
turned out that the position_fix=1 option fixes the issue. It implies
that the position reporting is inaccurate, and very likely hitting on
all Poulsbo devices.
The patch applies the workaround for Poulsbo generically to switch to
LPIB mode instead of the default position buffer.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3e8697e1-87c6-7a7b-d2e8-b21f1d2f181b@redhat.com
Link: https://lore.kernel.org/r/20221001142124.7241-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HDMI driver skips the notification handling from the graphics
driver when the codec driver is being in the PM operation. This
behavior was introduced by the commit eb399d3c99d8 ("ALSA: hda - Skip
ELD notification during PM process"). This skip may cause a problem,
as we may miss the ELD update when the connection/disconnection
happens right at the runtime-PM operation of the audio codec.
Although this workaround was valid at that time, it's no longer true;
the fix was required just because the ELD update procedure needed to
wake up the audio codec, which had lead to a runtime-resume during a
runtime-suspend. Meanwhile, the ELD update procedure doesn't need a
codec wake up any longer since the commit 788d441a164c ("ALSA: hda -
Use component ops for i915 HDMI/DP audio jack handling"); i.e. there
is no much reason for skipping the notification.
Let's drop those checks for addressing the missing notification.
Fixes: 788d441a164c ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling")
Reported-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220927135807.4097052-1-brent.lu@intel.com
Link: https://lore.kernel.org/r/20221001074809.7461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For scan loop must ensure that at least EXT4_FC_TAG_BASE_LEN space. If remain
space less than EXT4_FC_TAG_BASE_LEN which will lead to out of bound read
when mounting corrupt file system image.
ADD_RANGE/HEAD/TAIL is needed to add extra check when do journal scan, as this
three tags will read data during scan, tag length couldn't less than data length
which will read.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220924075233.2315259-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_fc_get_tl() to fill 'tl' with host byte order.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220924075233.2315259-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Introduce EXT4_FC_TAG_BASE_LEN helper for calculate length of
struct ext4_fc_tl.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220924075233.2315259-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_free_ext_path() to free extent path. As after previous patch
'ext4_ext_drop_refs()' is only used in 'extents.c', so make it static.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220924021211.3831551-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
According to Jan Kara's suggestion:
"The use in mext_check_coverage() can be actually removed
- get_ext_path() -> ext4_find_extent() takes care of dropping the references."
So remove unnecessary call ext4_ext_drop_refs() in mext_check_coverage().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220924021211.3831551-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
It is already checked after comment "check for invalid bits set",
so let's remove this one.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220918115219.12407-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220917093805.1782845-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now since all preparations is done, we can move the DIOREAD_NOLOCK
setting to ext4_set_def_opts().
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-17-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since sb->s_blocksize is now initialized at the very beginning, the
local variable 'blocksize' in __ext4_fill_super() is not needed now.
Remove it and use sb->s_blocksize instead.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-16-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now we load the super block from the disk in two steps. First we load
the super block with the default block size(EXT4_MIN_BLOCK_SIZE). Second
we load the super block with the real block size. The second step is a
little far from the first step. This patch move these two steps together
in a new function.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-15-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_journal_data_mode_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara<jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-14-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch group the journal load and initialize code together and
factor out ext4_load_and_init_journal(). This patch also removes the
lable 'no_journal' which is not needed after refactor.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-13-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_group_desc_init() and ext4_group_desc_free(). No
functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-12-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_geometry_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-11-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_check_feature_compatibility(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-10-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_init_metadata_csum(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-9-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_encoding_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-8-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_inode_info_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-7-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_fast_commit_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_handle_clustersize(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-5-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_set_def_opts(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The 'cantfind_ext4' error handler is just a error msg print and then
goto failed_mount. This two level goto makes the code complex and not
easy to read. The only benefit is that is saves a little bit code.
However some branches can merge and some branches dot not even need it.
So do some refactor and remove it.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Before these two branches neither loaded the journal nor created the
xattr cache. So the right label to goto is 'failed_mount3a'. Although
this did not cause any issues because the error handler validated if the
pointer is null. However this still made me confused when reading
the code. So it's still worth to modify to goto the right label.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-2-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If fastcommit is already disabled, there isn't need to mark inode ineligible.
So move 'ext4_fc_disabled()' judgement bofore 'ext4_should_journal_data(inode)'
judgement which can avoid to do meaningless judgement.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916083836.388347-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Factor out ext4_fc_disabled(). No functional change.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916083836.388347-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count
which may lead to use-after-free.
So judge buffer if uptodate before put buffer head reference count.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100812.1414768-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220911045204.516460-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_inline_data_fiemap() has been removed since
commit d3b6f23f7167 ("ext4: move ext4_fiemap to use iomap framework"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220909065307.1155201-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations with NFSv4 and unnecessary remeasurements for IMA.
The increment in ext4_mark_iloc_dirty is also problematic since it can
corrupt the i_version counter for ea_inodes. We aren't bumping the file
times in ext4_mark_iloc_dirty, so changing the i_version there seems
wrong, and is the cause of both problems.
Remove that callsite and add increments to the setattr, setxattr and
ioctl codepaths, at the same times that we update the ctime. The
i_version bump that already happens during timestamp updates should take
care of the rest.
In ext4_move_extents, increment the i_version on both inodes, and also
add in missing ctime updates.
[ Some minor updates since we've already enabled the i_version counter
unconditionally already via another patch series. -- TYT ]
Cc: stable@kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit 307af6c87937 ("mbcache: automatically delete entries from cache
on freeing") started nesting cache->c_list_lock under the bit locks
protecting hash buckets of the mbcache hash table in
mb_cache_entry_create(). This causes problems for real-time kernels
because there spinlocks are sleeping locks while bitlocks stay atomic.
Luckily the nesting is easy to avoid by holding entry reference until
the entry is added to the LRU list. This makes sure we cannot race with
entry deletion.
Cc: stable@kernel.org
Fixes: 307af6c87937 ("mbcache: automatically delete entries from cache on freeing")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
LIFO wakeup order is unfair and sometimes leads to a journal
user not being able to get a journal handle for hundreds of
transactions in a row.
FIFO wakeup can make things more fair.
Cc: stable@kernel.org
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@gmail.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220907165959.1137482-1-alexey.lyashkov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
