| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
- Add a WARN_ON_ONCE() on queue_delayed_work_on() on an offline CPU as
such work items won't get executed till the CPU comes back online
* tag 'wq-for-6.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: warn if delayed_work is queued to an offlined cpu.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix an OF node leak in the code parsing thermal zone DT properties
(Joe Hattori)"
* tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: fix OF node leak in of_thermal_zone_find()
|
|
In 'ath9k_hw_get_nf_hist_mid()', prefer 'memcpy()' and 'sort()'
over an ad-hoc things. Briefly tested as a separate module.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250109080703.106692-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add two more ACPI IRQ override quirks and update the code using them
to avoid unnecessary overhead (Hans de Goede)"
* tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: acpi_dev_irq_override(): Check DMI match last
ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
|
|
With the consolidation of put_prev_task/set_next_task(), see
commit 436f3eed5c69 ("sched: Combine the last put_prev_task() and the
first set_next_task()"), we are now skipping the transition between
these two functions when the previous and the next tasks are the same.
As a result, the scx idle state of a CPU is updated only when
transitioning to or from the idle thread. While this is generally
correct, it can lead to uneven and inefficient core utilization in
certain scenarios [1].
A typical scenario involves proactive wake-ups: scx_bpf_pick_idle_cpu()
selects and marks an idle CPU as busy, followed by a wake-up via
scx_bpf_kick_cpu(), without dispatching any tasks. In this case, the CPU
continues running the idle thread, returns to idle, but remains marked
as busy, preventing it from being selected again as an idle CPU (until a
task eventually runs on it and releases the CPU).
For example, running a workload that uses 20% of each CPU, combined with
an scx scheduler using proactive wake-ups, results in the following core
utilization:
CPU 0: 25.7%
CPU 1: 29.3%
CPU 2: 26.5%
CPU 3: 25.5%
CPU 4: 0.0%
CPU 5: 25.5%
CPU 6: 0.0%
CPU 7: 10.5%
To address this, refresh the idle state also in pick_task_idle(), during
idle-to-idle transitions, but only trigger ops.update_idle() on actual
state changes to prevent unnecessary updates to the scx scheduler and
maintain balanced state transitions.
With this change in place, the core utilization in the previous example
becomes the following:
CPU 0: 18.8%
CPU 1: 19.4%
CPU 2: 18.0%
CPU 3: 18.7%
CPU 4: 19.3%
CPU 5: 18.9%
CPU 6: 18.7%
CPU 7: 19.3%
[1] https://github.com/sched-ext/scx/pull/1139
Fixes: 7c65ae81ea86 ("sched_ext: Don't call put_prev_task_scx() before picking the next task")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
With IORING_SETUP_SQPOLL all requests are created by the SQPOLL task,
which means that req->task should always match sqd->thread. Since
accesses to sqd->thread should be separately protected, use req->task
in io_req_normal_work_add() instead.
Note, in the eyes of io_req_normal_work_add(), the SQPOLL task struct
is always pinned and alive, and sqd->thread can either be the task or
NULL. It's only problematic if the compiler decides to reload the value
after the null check, which is not so likely.
Cc: stable@vger.kernel.org
Cc: Bui Quang Minh <minhquangbui99@gmail.com>
Reported-by: lizetao <lizetao1@huawei.com>
Fixes: 78f9b61bd8e54 ("io_uring: wake SQPOLL task when task_work is added to an empty queue")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1cbbe72cf32c45a8fee96026463024cd8564a7d7.1736541357.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Syzkeller reports:
BUG: KASAN: slab-use-after-free in thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341
Read of size 8 at addr ffff88803578c510 by task syz.2.3223/27552
Call Trace:
<TASK>
...
kasan_report+0x143/0x180 mm/kasan/report.c:602
thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341
thread_group_cputime_adjusted+0xa6/0x340 kernel/sched/cputime.c:639
getrusage+0x1000/0x1340 kernel/sys.c:1863
io_uring_show_fdinfo+0xdfe/0x1770 io_uring/fdinfo.c:197
seq_show+0x608/0x770 fs/proc/fd.c:68
...
That's due to sqd->task not being cleared properly in cases where
SQPOLL task tctx setup fails, which can essentially only happen with
fault injection to insert allocation errors.
Cc: stable@vger.kernel.org
Fixes: 1251d2025c3e1 ("io_uring/sqpoll: early exit thread if task_context wasn't allocated")
Reported-by: syzbot+3d92cfcfa84070b0a470@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/efc7ec7010784463b2e7466d7b5c02c2cb381635.1736519461.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
|
|
Add support to request pdev puncture stats from firmware through
HTT stats type 46. These stats give the count of number of
subbands used in different wifi standards.
Sample output:
-------------
echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
tx_ofdm_su_last_used_pattern_mask = 0x00000001
tx_ofdm_su_num_subbands_used_cnt_01 = 217
tx_ofdm_su_num_subbands_used_cnt_02 = 0
tx_ofdm_su_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000
tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0
tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0
tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000
tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0
tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0
tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000
rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0
rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0
rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000
rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0
rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0
rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request Address Search Table(AST) entries stats
from firmware through HTT stats type 41. These stats give AST entries
related information such as software peer id, MAC address, pdev id,
vdev, id, next hop, etc.
Sample output:
-------------
echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_AST_ENTRY_TLV:
ast_index = 10
mac_addr = 00:00:00:01:00:00
sw_peer_id = 0
pdev_id = 3
vdev_id = 255
next_hop = 0
mcast = 0
monitor_direct = 0
mesh_sta = 0
mec = 0
intra_bss = 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218035711.2573584-2-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request OFDMA stats of transmit buffers from firmware through
HTT stats type 32. These stats give information about NDPA, NDP, BRP and
steering mechanisms.
Note: WCN7850 firmware version -
WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not
support HTT stats type 32.
Sample output:
-------------
echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV:
ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_NDP_STATS_TLV:
ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_BRP_STATS_TLV:
ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_STEER_STATS_TLV:
ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV:
rbo_steer_mpdus_tried = 0
rbo_steer_mpdus_failed = 0
sifs_steer_mpdus_tried = 0
sifs_steer_mpdus_failed = 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request transmit rate buffer stats from firmware through
HTT stats type 31. These stats give information such as MCS, NSS and
bandwidth of transmit and input buffer.
Sample output:
-------------
echo 31 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_STATS_PDEV_TX_RATE_TXBF_STATS:
Legacy OFDM Rates: 6 Mbps: 0, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0
24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0
tx_ol_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0
tx_ibf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0
tx_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0
tx_ol_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
tx_ibf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
tx_txbf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0
half_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0
quarter_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0
tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
half_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
quarter_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
half_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
quarter_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
HTT_STATS_PDEV_TXBF_FLAG_RETURN_STATS:
TXBF_reason_code_stats: 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Link: https://patch.msgid.link/20241128110949.3672364-2-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a handful of selftest fixes
- fix a memory leak in relocation processing during module loading
- avoid sleeping in die()
- fix kprobe instruction slot address calculations
- fix DT node reference leak in SBI idle probing
- avoid initializing out of bounds pages on sparse vmemmap systems with
a gap at the start of their physical memory map
- fix backtracing through exceptions
- _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y
- local labels in entry.S are now marked with ".L", which prevents them
from trashing backtraces
- a handful of fixes for SBI-based performance counters
* tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
tools: selftests: riscv: Add test count for vstate_prctl
tools: selftests: riscv: Add pass message for v_initval_nolibc
riscv: use local label names instead of global ones in assembly
riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition
riscv: stacktrace: fix backtracing through exceptions
riscv: mm: Fix the out of bound issue of vmemmap address
cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu
riscv: kprobes: Fix incorrect address calculation
riscv: Fix sleeping in invalid context in die()
riscv: module: remove relocation_head rel_entry member allocation
riscv: selftests: Fix warnings pointer masking test
|
|
delayed_work submitted to an offlined cpu, will not get executed,
after the specified delay if the cpu remains offline. If the cpu
never comes online the work will never get executed.
checking for online cpu in __queue_delayed_work, does not sound
like a good idea because to do this reliably we need hotplug lock
and since work may be submitted from atomic contexts, we would
have to use cpus_read_trylock. But if trylock fails we would queue
the work on any cpu and this may not be optimal because our intended
cpu might still be online.
Putting a WARN_ON_ONCE for an already offlined cpu, will indicate users
of queue_delayed_work_on, if they are (wrongly) trying to queue
delayed_work on offlined cpu. Also indicate the problem of using
offlined cpu with queue_delayed_work_on, in its description.
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixed card-detect on one board and some missing properties added.
* tag 'v6.13-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
Link: https://lore.kernel.org/r/2914560.yaVYbkx8dN@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix the maximum cell name length
- Fix merge preference rule failure condition
fuse:
- Fix fuse_get_user_pages() so it doesn't risk misleading the caller
to think pages have been allocated when they actually haven't
- Fix direct-io folio offset and length calculation
netfs:
- Fix async direct-io handling
- Fix read-retry for filesystems that don't provide a
->prepare_read() method
vfs:
- Prevent truncating 64-bit offsets to 32-bits in iomap
- Fix memory barrier interactions when polling
- Remove MNT_ONRB to fix concurrent modification of @mnt->mnt_flags
leading to MNT_ONRB to not be raised and invalid access to a list
member"
* tag 'vfs-6.13-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
afs: Fix merge preference rule failure condition
netfs: Fix read-retry for fs with no ->prepare_read()
netfs: Fix kernel async DIO
fs: kill MNT_ONRB
iomap: avoid avoid truncating 64-bit offset to 32 bits
afs: Fix the maximum cell name length
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix a missing lock while detaching a dquot buffer
- Fix failure on xfs_update_last_rtgroup_size for !XFS_RT
* tag 'xfs-fixes-6.13-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: lock dquot buffer before detaching dquot from b_li_list
xfs: don't return an error from xfs_update_last_rtgroup_size for !XFS_RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for !REGULATOR and !OF configurations, adding
missing stubs"
* tag 'regulator-fix-v6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATOR
regulator: Guard of_regulator_bulk_get_all() with CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There's one small fix for real HW - gpio-loongson.
The rest concern two virtual testing drivers in which some issues were
recently found and addressed:
- fix resource leaks in error path in gpio-virtuser (and one
consistent memory leak triggered on every device removal))
- fix the use-case of having multiple con_ids in a lookup table in
gpio-virtuser which has never worked (despite being advertised)
- don't allow rmdir() on configfs directories when they are in use in
gpio-sim and gpio-virtuser
- fix register offsets in gpio-loongson-64"
* tag 'gpio-fixes-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offset
gpio: sim: lock up configfs that an instantiated device depends on
gpio: virtuser: lock up configfs that an instantiated device depends on
gpio: virtuser: fix handling of multiple conn_ids in lookup table
gpio: virtuser: fix missing lookup table cleanups
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.13-rc7
Here are some new modem and cp210x device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
|
|
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following
kernel-doc issues:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes'
Add the missing 'Return:' tags to the kernel-doc of these functions.
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
|
|
THe last use of il_get_single_channel_number() was removed in 2011 by
commit dd6d2a8aef69 ("iwlegacy: remove reset rf infrastructure")
when it was still called iwl_legacy_get_single_channel_number.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
|
|
The last use of il3945_calc_db_from_ratio() was removed in 2010 by
commit ed1b6e99b5e6 ("iwlwifi: remove noise reporting")
when it was still called iwl3945_calc_db_from_ratio().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
|
|
The intention here is not clear but as this was already tested and matches
vendor driver it's better not to change behavior even if it looks suspicious.
So just remove the unused values.
Coverity-ID: 1525307
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
[kvalo@kernel.org: write commit message]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr
|
|
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac]
Signed-off-by: Stefan Dösinger <stefan@codeweavers.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
|
|
If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.
Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
|
|
There is a specific error path in probe functions in wilc drivers (both
sdio and spi) which can lead to kernel panic, as this one for example
when using SPI:
Unable to handle kernel paging request at virtual address 9f000000 when read
[9f000000] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc
CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22
Hardware name: Atmel SAMA5
PC is at wiphy_unregister+0x244/0xc40 [cfg80211]
LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211]
[...]
wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000]
wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi]
wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4
spi_probe from really_probe+0x270/0xb2c
really_probe from __driver_probe_device+0x1dc/0x4e8
__driver_probe_device from driver_probe_device+0x5c/0x140
driver_probe_device from __driver_attach+0x220/0x540
__driver_attach from bus_for_each_dev+0x13c/0x1a8
bus_for_each_dev from bus_add_driver+0x2a0/0x6a4
bus_add_driver from driver_register+0x27c/0x51c
driver_register from do_one_initcall+0xf8/0x564
do_one_initcall from do_init_module+0x2e4/0x82c
do_init_module from load_module+0x59a0/0x70c4
load_module from init_module_from_file+0x100/0x148
init_module_from_file from sys_finit_module+0x2fc/0x924
sys_finit_module from ret_fast_syscall+0x0/0x1c
The issue can easily be reproduced, for example by not wiring correctly
a wilc device through SPI (and so, make it unresponsive to early SPI
commands). It is due to a recent change decoupling wiphy allocation from
wiphy registration, however wilc_netdev_cleanup has not been updated
accordingly, letting it possibly call wiphy unregister on a wiphy which
has never been registered.
Fix this crash by moving wiphy_unregister/wiphy_free out of
wilc_netdev_cleanup, and by adjusting error paths in both drivers
Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com
|
|
Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface
combination is invalid, which will trigger the following warning trace
and get error returned from wiphy_register().
[ 10.080325] Call trace:
[ 10.082761] wiphy_register+0xc4/0x76c [cfg80211]
[ 10.087465] ieee80211_register_hw+0x800/0xac4 [mac80211]
[ 10.092868] mt76_register_device+0x16c/0x2c0 [mt76]
[ 10.097829] mt7996_register_device+0x740/0x844 [mt7996e]
Fix this by removing unused adhoc iftype.
Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com
|
|
Bring in the fixes for __pollwait() and waitqueue_active() interactions.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
waitqueue_active() and .poll()"
Oleg Nesterov <oleg@redhat.com> says:
The waitqueue_active() helper can only be used if both waker and waiter
have memory barriers that pair with each other. But __pollwait() is
broken in this respect. Fix it.
* patches from https://lore.kernel.org/r/20250107162649.GA18886@redhat.com:
poll: kill poll_does_not_wait()
sock_poll_wait: kill the no longer necessary barrier after poll_wait()
io_uring_poll: kill the no longer necessary barrier after poll_wait()
poll_wait: kill the obsolete wait_address check
poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll()
Link: https://lore.kernel.org/r/20250107162649.GA18886@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It no longer has users.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162743.GA18947@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that poll_wait() provides a full barrier we can remove smp_mb() from
sock_poll_wait().
Also, the poll_does_not_wait() check before poll_wait() just adds the
unnecessary confusion, kill it. poll_wait() does the same "p && p->_qproc"
check.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162736.GA18944@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that poll_wait() provides a full barrier we can remove smp_rmb() from
io_uring_poll().
In fact I don't think smp_rmb() was correct, it can't serialize LOADs and
STOREs.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162730.GA18940@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This check is historical and no longer needed, wait_address is never NULL.
These days we rely on the poll_table->_qproc check. NULL if select/poll
is not going to sleep, or it already has a data to report, or all waiters
have already been registered after the 1st iteration.
However, poll_table *p can be NULL, see p9_fd_poll() for example, so we
can't remove the "p != NULL" check.
Link: https://lore.kernel.org/all/20250106180325.GF7233@redhat.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162724.GA18926@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
.poll()
As the comment above waitqueue_active() explains, it can only be used
if both waker and waiter have mb()'s that pair with each other. However
__pollwait() is broken in this respect.
This is not pipe-specific, but let's look at pipe_poll() for example:
poll_wait(...); // -> __pollwait() -> add_wait_queue()
LOAD(pipe->head);
LOAD(pipe->head);
In theory these LOAD()'s can leak into the critical section inside
add_wait_queue() and can happen before list_add(entry, wq_head), in this
case pipe_poll() can race with wakeup_pipe_readers/writers which do
smp_mb();
if (waitqueue_active(wq_head))
wake_up_interruptible(wq_head);
There are more __pollwait()-like functions (grep init_poll_funcptr), and
it seems that at least ep_ptable_queue_proc() has the same problem, so the
patch adds smp_mb() into poll_wait().
Link: https://lore.kernel.org/all/20250102163320.GA17691@redhat.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162717.GA18922@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
alloc_can_err_skb() fails"
This series improves the the kvaser_usb and the kvaser_pciefd driver.
Update the error statistics, even if allocation of error skb fails and
add support for CAN_CTRLMODE_BERR_REPORTING.
Link: https://patch.msgid.link/20241230142645.128244-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for CAN_CTRLMODE_BERR_REPORTING,
allowing Bus Error Reporting to be enabled or disabled.
Previously, Bus Error Reporting was always active.
Co-developed-by: Alison Below <alisonbelow@gmail.com>
Signed-off-by: Alison Below <alisonbelow@gmail.com>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20241230142645.128244-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Ensure statistics, error counters, and CAN state are updated consistently,
even when alloc_can_err_skb() fails during state changes or error message
frame reception.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20241230142645.128244-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for CAN_CTRLMODE_BERR_REPORTING,
allowing Bus Error Reporting to be enabled or disabled.
Previously, Bus Error Reporting was always active.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20241230142645.128244-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Ensure statistics, error counters, and CAN state are updated consistently,
even when alloc_can_err_skb() fails during state changes or error message
frame reception.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20241230142645.128244-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The SRAM memory shared pointed to by the st,gcan property is unique, so
we don't need an array of phandles.
Fixes: e43250c0ac81 ("dt-bindings: net: can: add STM32 bxcan DT bindings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241228150043.3926696-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
suspend"
Sean Nyekjaer <sean@geanix.com> says:
When downing the tcan4x5x there is no reason to keep the tcan4x5x in
"normal" mode and waste power. So set standby mode when the interface
is down and normal mode when interface is up.
Also when going into suspend, set the tcan4x5x into standby mode. The
tcan4x5x can still be used as a wake-source when in standby as low
power RX is enabled.
Link: https://patch.msgid.link/20241122-tcan-standby-v3-0-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
m_can user like the tcan4x5x device, can go into standby mode.
Low power RX mode is enabled to allow wake on can.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-3-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
At Vsup 12V, standby mode will save 7-8mA, when the interface is
down.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-2-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is added in preparation for calling standby mode in the tcan4x5x
driver or other users of m_can.
For the tcan4x5x; If Vsup 12V, standby mode will save 7-8mA, when the
interface is down.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241122-tcan-standby-v3-1-90bafaf5eccd@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have to lock the buffer before we can delete the dquot log item from
the buffer's log item list.
Cc: stable@vger.kernel.org # v6.13-rc3
Fixes: acc8f8628c3737 ("xfs: attach dquot buffer to dquot log item buffer")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
