summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-21usb: typec: stusb160x: register role switch before interrupt registrationAmelie Delaunay
During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UASJulian Sikorski
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: ehci: Prevent missed ehci interrupts with edge-triggered MSIDavid Jeffery
When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Jeffery <djeffery@redhat.com> Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Disable USB 3 device initiated lpm if exit latency is too highMathias Nyman
The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Fix link power management max exit latency (MEL) calculationsMathias Nyman
Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: <stable@kernel.org> # v3.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: tipd: Don't block probing of consumer of "connector" nodesMartin Kepplinger
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.sm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21xhci: Fix lost USB 2 remote wakeMathias Nyman
There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "usb: renesas-xhci: Fix handling of unknown ROM state"Moritz Fischer
This reverts commit d143825baf15f204dac60acdf95e428182aa3374. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21drm/ttm: Force re-init if ttm_global_init() failsJason Ekstrand
If we have a failure, decrement the reference count so that the next call to ttm_global_init() will actually do something instead of assume everything is all set up. Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Fixes: 62b53b37e4b1 ("drm/ttm: use a static ttm_bo_global instance") Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720181357.2760720-5-jason@jlekstrand.net Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-20scsi: target: Fix NULL dereference on XCOPY completionDavid Disseldorp
CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") Cc: Lee Duncan <lduncan@suse.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-20ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-07-20 This series contains updates to e1000e and igc drivers. Sasha adds initial S0ix support for devices with CSME and adds polling for exiting of DPG. He sets the PHY to low power idle when in S0ix. He also adds support for new device IDs for and adds a space to debug messaging to help with readability for e1000e. For igc, he ensures that q_vector array is not accessed beyond its bounds and removes unneeded PHY related checks. Tree Davies corrects a spelling mistake in e1000e. Muhammad corrects the value written when there is no TSN offloading and adjusts timeout value to avoid possible Tx hang for igc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20arm64: dts: imx8mp: change interrupt order per dt-bindingJoakim Zhang
This patch changs interrupt order which found by dtbs_check. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:0: 'macirq' was expected arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:1: 'eth_wake_irq' was expected According to Documentation/devicetree/bindings/net/snps,dwmac.yaml, we should list interrupt in it's order. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yamlJoakim Zhang
In order to automate the verification of DT nodes covert imx-dwmac to nxp,dwmac-imx.yaml, and pass below checking. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20dt-bindings: net: snps,dwmac: add missing DWMAC IP versionJoakim Zhang
Add missing DWMAC IP version in snps,dwmac.yaml which found by below command, as NXP i.MX8 families support SNPS DWMAC 5.10a IP. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Documentation/devicetree/bindings/net/nxp,dwmac-imx.example.dt.yaml: ethernet@30bf0000: compatible: None of ['nxp,imx8mp-dwmac-eqos', 'snps,dwmac-5.10a'] are valid under the given schema Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20igc: Increase timeout value for Speed 100/1000/2500Muhammad Husaini Zulkifli
As the cycle time is set to maximum of 1s, the TX Hang timeout need to be increase to avoid possible TX Hang. There is no dedicated number specific in data sheet for the timeout factor. Timeout factor was determined during the debugging to solve the "Tx Hang" issues that happen in some cases mainly during ETF(Earliest TxTime First). This can be test by using TSN Schedule Tx Tools udp_tai sample application. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Set QBVCYCLET_S to 0 for TSN Basic SchedulingMuhammad Husaini Zulkifli
According to datasheet section 8.12.19, when there's no TSN offloading Shadow_QbvCycle bit[29:0] must be set to zero for basic scheduling. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Remove phy->type checkingSasha Neftin
i225 devices have only one phy->type: copper. There is no point checking phy->type during the igc_has_link method from the watchdog that invoked every 2 seconds. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Remove _I_PHY_ID checkingSasha Neftin
i225 devices have only one PHY vendor. There is no point checking _I_PHY_ID during the link establishment and auto-negotiation process. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Check if num of q_vectors is smaller than max before array accessSasha Neftin
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20net/e1000e: Fix spelling mistake "The" -> "This"Tree Davies
There is a spelling mistake in the comment block. Signed-off-by: Tree Davies <tdavies@darkphysics.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add space to the debug printSasha Neftin
Minor fixes to allow debug prints more readable. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for Lunar LakeSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Lunar Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Additional PHY power saving in S0ixSasha Neftin
After transferring the MAC-PHY interface to the SMBus set the PHY to S0ix low power idle mode. Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add polling mechanism to indicate CSME DPG exitSasha Neftin
Per guidance from the CSME architecture team, it may take up to 1 second for unconfiguring dynamic power gating mode. Practically it can take more time. Wait up to 2.5 seconds to indicate dynamic power gating exit from the S0ix configuration. Detect scenarios that take more than 1 second but less than 2.5 seconds will emit warning message. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add handshake with the CSME to support S0ixSasha Neftin
On the corporate system, the driver will ask from the CSME (manageability engine) to perform device settings are required to allow S0ix residency. This patch provides initial support. Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20Merge branch 'libbpf: btf typed data dumping fixes (__int128 usage, error ↵Andrii Nakryiko
propagation)' Alan Maguire says: ==================== This series aims to resolve further issues with the BTF typed data dumping interfaces in libbpf. Compilation failures with use of __int128 on 32-bit platforms were reported [1]. As a result, the use of __int128 in libbpf typed data dumping is replaced with __u64 usage for bitfield manipulations. In the case of 128-bit integer values, they are simply split into two 64-bit hex values for display (patch 1). Tests are added for __int128 display in patch 2, using conditional compilation to avoid problems with a lack of __int128 support. Patch 3 resolves an issue Andrii noted about error propagation when handling enum data display. More followup work is required to ensure multi-dimensional char array display works correctly. [1] https://lore.kernel.org/bpf/1626362126-27775-1-git-send-email-alan.maguire@oracle.com/T/#mc2cb023acfd6c3cd0b661e385787b76bb757430d Changes since v1: - added error handling for bitfield size > 64 bits by changing function signature for bitfield retrieval to return an int error value and to set bitfield value via a __u64 * argument (Andrii) ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-07-20libbpf: Propagate errors when retrieving enum value for typed data displayAlan Maguire
When retrieving the enum value associated with typed data during "is data zero?" checking in btf_dump_type_data_check_zero(), the return value of btf_dump_get_enum_value() is not passed to the caller if the function returns a non-zero (error) value. Currently, 0 is returned if the function returns an error. We should instead propagate the error to the caller. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1626770993-11073-4-git-send-email-alan.maguire@oracle.com
2021-07-20selftests/bpf: Add __int128-specific tests for typed data dumpAlan Maguire
Add tests for __int128 display for platforms that support it. __int128s are dumped as hex values. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1626770993-11073-3-git-send-email-alan.maguire@oracle.com
2021-07-20libbpf: Avoid use of __int128 in typed dump displayAlan Maguire
__int128 is not supported for some 32-bit platforms (arm and i386). __int128 was used in carrying out computations on bitfields which aid display, but the same calculations could be done with __u64 with the small effect of not supporting 128-bit bitfields. With these changes, a big-endian issue with casting 128-bit integers to 64-bit for enum bitfields is solved also, as we now use 64-bit integers for bitfield calculations. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1626770993-11073-2-git-send-email-alan.maguire@oracle.com
2021-07-20selftests, bpf: test_tc_tunnel.sh nc: Cannot use -p and -lVincent Li
When run test_tc_tunnel.sh, it complains following error ipip encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100 test basic connectivity nc: cannot use -p and -l nc man page has: -l Listen for an incoming connection rather than initiating a connection to a remote host.Cannot be used together with any of the options -psxz. Additionally, any timeouts specified with the -w option are ignored. Correct nc in server_listen(). Signed-off-by: Vincent Li <vincent.mc.li@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210719223022.66681-1-vincent.mc.li@gmail.com
2021-07-20i2c: mpc: Poll for MCFChris Packham
During some transfers the bus can still be busy when an interrupt is received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status register") attempted to address this by re-reading MPC_I2C_SR once but that just made it less likely to happen without actually preventing it. Instead of a single re-read, poll with a timeout so that the bus is given enough time to settle but a genuine stuck SCL is still noticed. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-20Merge tag 'at24-fixes-for-v5.14' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.14 - fix a problem with repeating labels not getting a device id
2021-07-20bpf, selftests: Fix test_maps now that sockmap supports UDPJohn Fastabend
UDP socket support was added recently so testing UDP insert failure is no longer correct and causes test_maps failure. The fix is easy though, we simply need to test that UDP is correctly added instead of blocked. Fixes: 122e6c79efe1c ("sock_map: Update sock type checks for UDP") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210720184832.452430-1-john.fastabend@gmail.com
2021-07-20s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/cpumf: fix semicolon.cocci warningskernel test robot
arch/s390/kernel/perf_cpum_cf.c:748:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a029a4eab39e ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility") CC: Thomas Richter <tmricht@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/boot: fix use of expolines in the DMA codeAlexander Egorenkov
The DMA code section of the decompressor must be compiled with expolines if Spectre V2 mitigation has been enabled for the decompressed kernel. This is required because although the decompressor's image contains the DMA code section, it is handed over to the decompressed kernel for use. Because the DMA code is already slow w/o expolines, use expolines always regardless whether the decompressed kernel is using them or not. This simplifies the DMA code by dropping the conditional compilation of expolines. Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20ceph: don't WARN if we're still opening a session to an MDSLuis Henriques
If MDSs aren't available while mounting a filesystem, the session state will transition from SESSION_OPENING to SESSION_CLOSING. And in that scenario check_session_state() will be called from delayed_work() and trigger this WARN. Avoid this by only WARNing after a session has already been established (i.e., the s_ttl will be different from 0). Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq") Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-07-20rbd: don't hold lock_rwsem while running_list is being drainedIlya Dryomov
Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking on releasing_wait completion. On the I/O completion side, each image request also needs to take lock_rwsem for read. Because rw_semaphore implementation doesn't allow new readers after a writer has indicated interest in the lock, this can result in a deadlock if something that needs to take lock_rwsem for write gets involved. For example: 1. watch error occurs 2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 3. after reestablishing the watch, rbd_reregister_watch() takes lock_rwsem for write and calls rbd_reacquire_lock() 4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on releasing_wait until running_list becomes empty 5. another watch error occurs 6. rbd_watch_errcb() blocks trying to take lock_rwsem for write 7. no in-flight image request can complete and delete itself from running_list because lock_rwsem won't be granted anymore A similar scenario can occur with "lock has been acquired" and "lock has been released" notification handers which also take lock_rwsem for write to update owner_cid. We don't actually get anything useful from sitting on lock_rwsem in rbd_quiesce_lock() -- owner_cid updates certainly don't need to be synchronized with. In fact the whole owner_cid tracking logic could probably be removed from the kernel client because we don't support proxied maintenance operations. Cc: stable@vger.kernel.org # 5.3+ URL: https://tracker.ceph.com/issues/42757 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20rbd: always kick acquire on "acquired" and "released" notificationsIlya Dryomov
Skipping the "lock has been released" notification if the lock owner is not what we expect based on owner_cid can lead to I/O hangs. One example is our own notifications: because owner_cid is cleared in rbd_unlock(), when we get our own notification it is processed as unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer that requested the lock then doesn't go through with acquiring it, I/O requests that came in while the lock was being quiesced would be stalled until another I/O request is submitted and kicks acquire from rbd_img_exclusive_lock(). This makes the comment in rbd_release_lock() actually true: prior to this change the canceled work was being requeued in response to the "lock has been acquired" notification from rbd_handle_acquired_lock(). Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10Kai Vehmanen
On some Intel NUC10 variants, codec reports AC_JACK_PORT_NONE as pin default config for all pins. This results in broken audio. Add a quirk to force connectivity. BugLink: https://github.com/clearlinux/distribution/issues/2396 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210720153216.2200938-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20net: phy: at803x: simplify custom phy id matchingRussell King
The at803x driver contains a function, at803x_match_phy_id(), which tests whether the PHY ID matches the value passed, comparing phy_id with phydev->phy_id and testing all bits that in the driver's mask. This is the same test that is used to match the driver, with phy_id replaced with the driver specified ID, phydev->drv->phy_id. Hence, we already know the value of the bits being tested if we look at phydev->drv->phy_id directly, and we do not require a complicated test to check them. Test directly against phydev->drv->phy_id instead. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"Jia He
This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller <davem@davemloft.net> Cc: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptionsPaolo Abeni
While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: marvell: clean up trigraph warning on ??! stringColin Ian King
The character sequence ??! is a trigraph and causes the following clang warning: drivers/net/ethernet/marvell/mvneta.c:2604:39: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20atm: idt77252: clean up trigraph warning on ??) stringColin Ian King
The character sequence ??) is a trigraph and causes the following clang warning: drivers/atm/idt77252.c:3544:35: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: phy: intel-xway: Add RGMII internal delay configurationMartin Schiller
This adds the possibility to configure the RGMII RX/TX clock skew via devicetree. Simply set phy mode to "rgmii-id", "rgmii-rxid" or "rgmii-txid" and add the "rx-internal-delay-ps" or "tx-internal-delay-ps" property to the devicetree. Furthermore, a warning is now issued if the phy mode is configured to "rgmii" and an internal delay is set in the phy (e.g. by pin-strapping), as in the dp83867 driver. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: phylink: add phy change pause mode debugRussell King (Oracle)
Augment the phy link debug prints with the pause state. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: mvpp2: deny disabling autoneg for 802.3z modesRussell King (Oracle)
The documentation for Armada 8040 says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvpp2 hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause # ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 05:45:46 +0000