summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-20drm/i915: Adjust seamless_m_n flag behaviourVille Syrjälä
Make the seamless_m_n flag more like the update_pipe fastset flag, ie. the flag will only be set if we need to do the seamless M/N update, and in all other cases the flag is cleared. Also rename the flag to update_m_n to make it more clear it's similar to update_pipe. I believe special casing seamless_m_n like this makes sense as it also affects eg. vblank evasion. We can potentially avoid some vblank evasion tricks, simplify some checks, and hopefully will help with the VRR vs. M/N mess. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
2023-09-20drm/i915: Enable VRR later during fastsetsVille Syrjälä
In order to reconcile seamless M/N updates with VRR we'll need to defer the fastset VRR enable to happen after the seamless M/N update (which happens during the vblank evade critical section). So just push the VRR enable to be the last thing during the update. This will also affect the vblank evasion as the transcoder will now still be running with the old VRR state during the vblank evasion. So just grab the timings always from the old crtc state during any non-modeset commit, and also grab the current state of VRR from the active timings (as we disable VRR before vblank evasion during fastsets). This also fixes vblank evasion for seamless M/N updates as we now properly account for the fact that the M/N update happens after vblank evasion. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20drm/i915: Extract intel_crtc_vblank_evade_scanlines()Ville Syrjälä
Pull the vblank evasion scanline calculations into their own helper to declutter intel_pipe_update_start() a bit. Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20drm/i915: Change intel_pipe_update_{start,end}() calling conventionVille Syrjälä
We'll need to also look at the old crtc state in intel_pipe_update_start() so change the calling convention to just plumb in the full atomic state instead. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20drm/i915: Move psr unlock out from the pipe update critical sectionVille Syrjälä
Do the PSR unlock after the vblank evade critcal section is fully over, not before. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-09-20drm/i915/dsi: let HW maintain CLK_POSTWilliam Tseng
This change is to adjust TCLK-POST timing so DSI signaling can meet CTS specification. For clock lane, the TCLK-POST timing may be changed from 133.44 ns to 178.72 ns, which is greater than (60 ns+52*UI) and is conformed to the CTS standard. The computed UI is around 1.47 ns. v2: remove the change of HS-TRAIL. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: William Tseng <william.tseng@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230914095137.4132029-1-william.tseng@intel.com
2023-09-18drm/i915/cx0: Add step for programming msgbus timerGustavo Sousa
There was a recent update in the BSpec adding an extra step to the PLL enable sequence, which is for programming the msgbus timer. Since we also touch PHY registers during hw readout, let's do the programming when starting a transaction rather than only when doing the PLL enable sequence. This might be the missing step that was causing the timeouts that we have recently seen during C20 SRAM register programming sequences. With this in place, we shouldn't need the logic to bump the timer thresholds, since now we have a documented value that should be set peform programming the registers. As such, let's also remove intel_cx0_bus_check_and_bump_timer(), but keep the part that checks if hardware really detected a timeout, which might be useful debugging information. v2: - Use debug level instead of warning for the message notifying that the hardware did not detect the timeout. (Mika) - Got a new BSpec update clarifying that we need to program the msgbus timer of both PHY lanes. Update the changes to reflect that. (Gustavo) BSpec: 64568 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230912155923.39494-1-gustavo.sousa@intel.com
2023-09-18drm/i915/dp_mst: Tune down error message during payload additionImre Deak
If a sink is removed in the middle of payload addition drm_dp_add_payload_part1() will fail as expected, either not finding the payload's MST port or failing the payload-add AUX transaction. Based on the above tune the error message down to a debug messge. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-4-imre.deak@intel.com
2023-09-18drm/i915: Remove runtime suspended boolean from intel_runtime_pm structJouni Högander
It's not necessary to carry separate suspended status information in intel_runtime_pm struct as this information is already in underlying device structure. Remove it and use pm_runtime_suspended() to obtain suspended status information when needed. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230913100430.3433969-1-jouni.hogander@intel.com
2023-09-15drm/i915: move intel_display_device_probe() one level higherJani Nikula
Don't hide display probe in device info code. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230912120537.2158209-3-jani.nikula@intel.com
2023-09-15drm/i915/display: call gmdid display probe at a higher levelJani Nikula
Move gmdid selection one abstraction level higher. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230912120537.2158209-2-jani.nikula@intel.com
2023-09-15drm/i915: move more of the display probe to display codeJani Nikula
Initializing i915->display.info.__device_info and DISPLAY_RUNTIME_INFO() really belongs in display code. Move them there. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230912120537.2158209-1-jani.nikula@intel.com
2023-09-15drm/i915/dpt: replace GEM_BUG_ON() with drm_WARN_ON()Jani Nikula
Avoid using GEM_BUG_ON() in display code. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/17e70eaf967bdfe99111cdbb3bcf6aa2f0b0e837.1694684044.git.jani.nikula@intel.com
2023-09-15drm/i915/fb: replace GEM_WARN_ON() with drm_WARN_ON()Jani Nikula
Avoid using GEM_WARN_ON() in display code. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/593285450602c259b6985972d68511190c754bf5.1694684044.git.jani.nikula@intel.com
2023-09-15drm/i915/fbc: replace GEM_BUG_ON() to drm_WARN_ON()Jani Nikula
Avoid using GEM_BUG_ON() in display code. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a7d53a403822b43c7d78689a10480b47ccc0534d.1694684044.git.jani.nikula@intel.com
2023-09-15drm/i915/sdvo: Constify mapping structsVille Syrjälä
We aren't intending to mutate the SDVO device mapping structs, so make them const. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-13-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/hdmi: Remove old i2c symlinkVille Syrjälä
Remove the i915 specific i2c-N symlink from HDMI connectors. This was added to sort of mirror the DP connectors that alreayd had their aux ch based i2c adapter sitting beneath them in the sysfs hierarchy. But now that we have the standard "ddc" symlink approach provided by the core let's switch to that fully. I don't think anything beyond igt depends on this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-12-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/hdmi: Nuke hdmi->ddc_busVille Syrjälä
Remove the mostly redundant hdmi->ddc_bus. The only thing that needs it anymore is get_encoder_by_ddc_bus(), but that can be replaced with a slight detour through attached_connector+intel_gmbus_get_adapter(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-11-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/hdmi: Use connector->ddc everwhereVille Syrjälä
We already populate connector->ddc for HDMI ports, but so far we've not taken full advantage of it. Do that by eliminating a bunch of intel_gmbus_get_adapter() lookups. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/mst: Populate connector->ddcVille Syrjälä
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for DP MST connectors. TODO: test that this actually works References: https://gitlab.freedesktop.org/drm/intel/-/issues/3605 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/dp: Populate connector->ddcVille Syrjälä
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for analog DP SST connectors. Let's also reorder intel_dp_aux_init() vs. drm_connector_init_with_ddc() a bit to make sure the i2c aux ch is at least somewhat populated before we pass it on, though drm_connector_init_with_ddc() does not actually do anything with it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/dvo: Populate connector->ddcVille Syrjälä
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for DVO connectors. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/crt: Populate connector->ddcVille Syrjälä
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for analog VGA connectors. As a bonus we can replace a bunch of intel_gmbus_get_adapter() lookups with just the connector->ddc pointer. Sadly one extra lookup still remains due to the g4x DVI-I shenanigans. We could perhaps consider borrowing the ddc proxy idea from SDVO to deal with that in a perhaps nicer way, but can't really be bothered right now at least. Also not sure exposing such a dual ddc bus to userspace would be quite wise. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/lvds: Populate connector->ddcVille Syrjälä
Populate connector->ddc, and thus create the "ddc" symlink in sysfs for the LVDS port. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915: Call the DDC bus i2c adapter "ddc"Ville Syrjälä
Rename the various names we've used for the DDC bus i2c adapter ("i2c", "adapter", etc.) to just "ddc". This differentiates it from the various other i2c busses we might have (DSI panel stuff, DVO control bus, etc.). v2: Don't add a bogus drm_get_edid() call (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230831104300.29688-1-ville.syrjala@linux.intel.com
2023-09-15drm/sysfs: Register "ddc" symlink laterVille Syrjälä
Currently drm_sysfs_connector_add() attempts to register the "ddc" symlink (based one connector->ddc) before the driver's .early_register() hook has been called. That is too early for i915 which only fully registers the aux ch and associated i2c bus from said hook (to prevent half initialized stuff getting exposed to userspace). This causes my attempt at using drm_connector_init_with_ddc() to fail, and the entire connector disappears from sysfs on account of sysfs_create_link() failing. To fix that split the sysfs symlink stuff into separate functions (drm_sysfs_connector_add_late() and drm_sysfs_connector_remove_early()) which are called on the opposite side of the .later_register() and .early_unregister() hooks. Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
2023-09-15drm: Reorder drm_sysfs_connector_remove() vs. drm_debugfs_connector_remove()Ville Syrjälä
Use the standard onion peeling approach and call drm_debugfs_connector_remove() and drm_sysfs_connector_remove() in the reverse order in drm_connector_unregister() than what we called their add counterpartse in drm_connector_register(). The error unwiding in drm_connector_register() is already doing this the correct way around. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
2023-09-15Merge drm/drm-next into drm-intel-nextJani Nikula
Sync to v6.6-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-09-14drm/i915/dsc: Fix pic_width readoutSuraj Kandpal
pic_width when written into the PPS register is divided by the no. of vdsc instances first but the actual variable that we compare it to does not change i.e vdsc_cfg->pic_width hence when reading the register back for pic_width it needs to be multiplied by num_vdsc_instances rather than being divided. Fixes: 8b70b5691704 ("drm/i915/vdsc: Fill the intel_dsc_get_pps_config function") Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230911193742.836063-1-suraj.kandpal@intel.com
2023-09-13drm/i915: Introduce crtc_state->enhanced_framingVille Syrjälä
Track DP enhanced framing properly in the crtc state instead of relying just on the cached DPCD everywhere, and hook it up into the state check and dump. v2: Actually set enhanced_framing in .compute_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Reduce combo PHY log spamVille Syrjälä
We always check whether combo PHYs need to be re-initialized after disabling DC states, which leads to log spam. Switch things around so that we only log something when we actually have to re-initialized a PHY. The log spam was exacerbated by commit 41b4c7fe72b6 ("drm/i915: Disable DC states for all commits") since we now disable DC states far more often. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-12-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Stop spamming the logs with PLL stateVille Syrjälä
encoder->get_config() is not the place where the state should be dumped. Get rid of the spam. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-10-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Split some long lines in hsw_fdi_link_train()Ville Syrjälä
Split some overly long lines in hsw_fdi_link_train(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-8-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Fix FEC state dumpVille Syrjälä
Stop dumping state while reading it out. We have a proper place for that stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-7-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Fix FEC pipe A vs. DDI A mixupVille Syrjälä
On pre-TGL FEC is a port level feature, not a transcoder level feature, and it's DDI A which doesn't have it, not trancoder A. Check for the correct thing when determining whether FEC is supported or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915/mst: Read out FEC stateVille Syrjälä
The MST codepath is missing FEC readout. Add it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-4-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-12drm/i915/gt: rename DBG() to GTT_TRACE()Jani Nikula
intel_gtt.h is indirectly included absolutely everywhere in the driver. DBG() is too short a name. Rename it GTT_TRACE() after GEM_TRACE(). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230911123305.1682554-1-jani.nikula@intel.com
2023-09-11drm/i915/dsc: use REG_BIT, REG_GENMASK, and friends for PPS0 and PPS1Jani Nikula
Use the register helper macros for PPS0 and PPS1 register contents. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0dfebe37a391a5ceb8bfae8e16383f1e5aef815d.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: add the PPS number to the register content macrosJani Nikula
Improve clarity by specifying the PPS number in the register content macros. It's easier to notice if macros are being used for the wrong register. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/58de57b04ad2da5207f52c56c9e40663aaf16173.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: clean up pps commentsJani Nikula
Unify comments to be the simple "PPS n" instead of all sorts of variants. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/915970973ef117fc8d47fbc57e8fa296235ad3e3.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: drop redundant = 0 assignmentsJani Nikula
Directly assign the values instead of first assigning 0 and then |= the values. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d752a148cc84558b76c8c3dacd9c0b2e0a4efd91.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: rename pps write to intel_dsc_pps_write()Jani Nikula
Make the function name conform to existing style better. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e793056e610ee8cfe2a8d69605402cd2445a517a.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: have intel_dsc_pps_read() return the valueJani Nikula
Register read functions usually return the value instead of passing via pointer parameters. Return the multiple register verification results via a pointer parameter, which can also be NULL to skip the extra checks. Make the name conform to existing style better while at it. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4d08c0f63c4975cc8cd01b0f82845c989bf13dd0.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: have intel_dsc_pps_read_and_verify() return the valueJani Nikula
Register read functions usually return the value instead of passing via pointer parameters. The calling code becomes easier to read. Make the name conform to existing style better while at it. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/89b7d70bb19114ab3ff0e150a4b862d8032f136d.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915/dsc: improve clarity of the pps reg read/write helpersJani Nikula
Make it clear what's the number of vdsc per pipe, and what's the number of registers to grab. Have intel_dsc_get_pps_reg() return the registers it knows even if the requested amount is bigger. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e2551b52ac0dd2b4ffe18d5e7733fafdc191d68a.1693933849.git.jani.nikula@intel.com
2023-09-11drm/i915: Only check eDP HPD when AUX CH is sharedVille Syrjälä
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the eDP HPD line properly connected, and thus fails the new HPD check during eDP probe. The result is that we lose the eDP output. I suspect all such machines would be Chromebooks or other Linux exclusive systems as the Windows driver likely wouldn't work either. I did check a few other BDW machines here and those do have eDP HPD connected, one of them even is a different Chromebook (Samus). To account for these funky machines let's skip the HPD check when it looks like the eDP port is the only one using that specific AUX channel. In case of multiple ports sharing the same AUX CH (eg. on Asrock B250M-HDV) we still do the check and thus should correctly ignore the eDP port in favor of the other DP port (usually a DP->VGA converter). v2: Don't oops during list iteration Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264 Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-10Linux 6.6-rc1v6.6-rc1Linus Torvalds
2023-09-10Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm ci scripts from Dave Airlie: "This is a bunch of ci integration for the freedesktop gitlab instance where we currently do upstream userspace testing on diverse sets of GPU hardware. From my perspective I think it's an experiment worth going with and seeing how the benefits/noise playout keeping these files useful. Ideally I'd like to get this so we can do pre-merge testing on PRs eventually. Below is some info from danvet on why we've ended up making the decision and how we can roll it back if we decide it was a bad plan. Why in upstream? - like documentation, testcases, tools CI integration is one of these things where you can waste endless amounts of time if you accidentally have a version that doesn't match your source code - but also like the above, there's a balance, this is the initial cut of what we think makes sense to keep in sync vs out-of-tree, probably needs adjustment - gitlab supports out-of-repo gitlab integration and that's what's been used for the kernel in drm, but it results in per-driver fragmentation and lots of duplicated effort. the simple act of smashing an arbitrary winner into a topic branch already started surfacing patches on dri-devel and sparking good cross driver team discussions Why gitlab? - it's not any more shit than any of the other CI - drm userspace uses it extensively for everything in userspace, we have a lot of people and experience with this, including integration of hw testing labs - media userspace like gstreamer is also on gitlab.fd.o, and there's discussion to extend this to the media subsystem in some fashion Can this be shared? - there's definitely a pile of code that could move to scripts/ if other subsystem adopt ci integration in upstream kernel git. other bits are more drm/gpu specific like the igt-gpu-tests/tools integration - docker images can be run locally or in other CI runners Will we regret this? - it's all in one directory, intentionally, for easy deletion - probably 1-2 years in upstream to see whether this is worth it or a Big Mistake. that's roughly what it took to _really_ roll out solid CI in the bigger userspace projects we have on gitlab.fd.o like mesa3d" * tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm: drm: ci: docs: fix build warning - add missing escape drm: Add initial ci/ subdirectory
2023-09-10Merge tag 'x86-urgent-2023-09-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups" * tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld x86/smp: Don't send INIT to non-present and non-booted CPUs
2023-09-10Merge tag 'perf-urgent-2023-09-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Work around a firmware bug in the uncore PMU driver, affecting certain Intel systems" * tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on EMR
generated by cgit (git 2.34.1) at 2025-09-14 21:47:05 +0000