| Age | Commit message (Collapse) | Author |
|---|
|
When writing to a delalloc region in the data fork, commit the new
allocations (of the da reservation) as unwritten so that the mappings
are only marked written once writeback completes successfully. This
fixes the problem of stale data exposure if the system goes down during
targeted writeback of a specific region of a file, as tested by
generic/042.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Refactor xfs_iomap_prealloc_size to be the function that dynamically
computes the per-file preallocation size by moving the allocsize= case
to the caller. Break up the huge comment preceding the function to
annotate the relevant parts of the code, and remove the impossible
check_writeio case.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
When we're estimating a new speculative preallocation length for an
extending write, we should walk backwards through the extent list to
determine the number of number of blocks that are physically and
logically contiguous with the write offset, and use that as an input to
the preallocation size computation.
This way, preallocation length is truly measured by the effectiveness of
the allocator in giving us contiguous allocations without being
influenced by the state of a given extent. This fixes both the problem
where ZERO_RANGE within an EOF can reduce preallocation, and prevents
the unnecessary shrinkage of preallocation when delalloc extents are
turned into unwritten extents.
This was found as a regression in xfs/014 after changing delalloc writes
to create unwritten extents during writeback.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
During writeback, it's possible for the quota block reservation in
xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
limit. This causes writeback errors for data that was already written
to disk, when it's not even guaranteed that the bmbt will expand to
exceed the quota limit. Irritatingly, this condition is reported to
userspace as EIO by fsync, which is confusing.
We wrote the data, so allow the reservation. That might put us slightly
above the hard limit, but it's better than losing data after a write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The perag structure already has a pointer to the xfs_mount, so we don't
need to pass that separately and can drop it. Having done that, move
iter_flags so that the argument order is the same between xfs_inode_walk
and xfs_inode_walk_ag. The latter will make things less confusing for a
future patch that enables background scanning work to be done in
parallel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
We're not very consistent about function names for the incore inode
iteration function. Turn them all into xfs_inode_walk* variants.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the xfs_inode_ag_iterator function to be nearer xfs_inode_ag_walk
so that we don't have to scroll back and forth to figure out how the
incore inode walking function works. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
This is a boolean variable, so use the bool type.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
There are a number of predicate functions that help the incore inode
walking code decide if we really want to apply the iteration function to
the inode. These are boolean decisions, so change the return types to
boolean to match.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Refactor the two eofb-matching logics into a single helper so that we
don't repeat ourselves.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This is now a pointless wrapper, so kill it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The incore inode walk code passes a flags argument and a pointer from
the xfs_inode_ag_iterator caller all the way to the iteration function.
We can reduce the function complexity by passing flags through the
private pointer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Combine xfs_inode_ag_iterator_flags and xfs_inode_ag_iterator_tag into a
single wrapper function since there's only one caller of the _flags
variant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Not used by anyone, so get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Use XFS_ICI_NO_TAG instead of -1 when appropriate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Move xfs_fs_eofblocks_from_user into the only file that actually uses
it, so that we don't have this function cluttering up the header file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The only grace period which can be set in the kernel today is for id 0,
i.e. the default grace period for all users. However, setting an
individual grace period is useful; for example:
Alice has a soft quota of 100 inodes, and a hard quota of 200 inodes
Alice uses 150 inodes, and enters a short grace period
Alice really needs to use those 150 inodes past the grace period
The administrator extends Alice's grace period until next Monday
vfs quota users such as ext4 can do this today, with setquota -T
To enable this for XFS, we simply move the timelimit assignment out
from under the (id == 0) test. Default setting remains under (id == 0).
Note that this now is consistent with how we set warnings.
(Userspace requires updates to enable this as well; xfs_quota needs to
parse new options, and setquota needs to set appropriate field flags.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move timers and warnings out of xfs_quotainfo and into xfs_def_quota
so that we can utilize them on a per-type basis, rather than enforcing
them based on the values found in the first enabled quota type.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[zlang: new way to get defquota in xfs_qm_init_timelimits]
[zlang: remove redundant defq assign]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_get_defquota() currently takes an xfs_dquot, and from that obtains
the type of default quota we should get (user/group/project).
But early in init, we don't have access to a fully set up quota, so
that's not possible. The next patch needs go set up default quota
timers early, so switch xfs_get_defquota to take an explicit type
and add a helper function to obtain that type from an xfs_dquot
for the existing callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pass xfs_dquot rather than xfs_disk_dquot to xfs_qm_adjust_dqtimers;
this makes it symmetric with xfs_qm_adjust_dqlimits and will help
the next patch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There is a fair bit of whitespace damage in the quota code, so
fix up enough of it that subsequent patches are restricted to
functional change to aid review.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
XFS project quota treats project hierarchies as "mini filesysems" and
so rather than -EDQUOT, the intent is to return -ENOSPC when a quota
reservation fails, but this behavior is not consistent.
The only place we make a decision between -EDQUOT and -ENOSPC
returns based on quota type is in xfs_trans_dqresv().
This behavior is currently controlled by whether or not the
XFS_QMOPT_ENOSPC flag gets passed into the quota reservation. However,
its use is not consistent; paths such as xfs_create() and xfs_symlink()
don't set the flag, so a reservation failure will return -EDQUOT for
project quota reservation failures rather than -ENOSPC for these sorts
of operations, even for project quota:
# mkdir mnt/project
# xfs_quota -x -c "project -s -p mnt/project 42" mnt
# xfs_quota -x -c 'limit -p isoft=2 ihard=3 42' mnt
# touch mnt/project/file{1,2,3}
touch: cannot touch ‘mnt/project/file3’: Disk quota exceeded
We can make this consistent by not requiring the flag to be set at the
top of the callchain; instead we can simply test whether we are
reserving a project quota with XFS_QM_ISPDQ in xfs_trans_dqresv and if
so, return -ENOSPC for that failure. This removes the need for the
XFS_QMOPT_ENOSPC altogether and simplifies the code a fair bit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Long ago, group & project quota were mutually exclusive, and so
when we turned on XFS_QMOPT_ENOSPC ("return ENOSPC if project quota
is exceeded") when project quota was enabled, we only needed to
disable it again for user quota.
When group & project quota got separated, this got missed, and as a
result if project quota is enabled and group quota is exceeded, the
error code returned is incorrectly returned as ENOSPC not EDQUOT.
Fix this by stripping XFS_QMOPT_ENOSPC out of flags for group
quota when we try to reserve the space.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
It's a global atomic counter, and we are hitting it at a rate of
half a million transactions a second, so it's bouncing the counter
cacheline all over the place on large machines. We don't actually
need it anymore - it used to be required because the VFS freeze code
could not track/prevent filesystem transactions that were running,
but that problem no longer exists.
Hence to remove the counter, we simply have to ensure that nothing
calls xfs_sync_sb() while we are trying to quiesce the filesytem.
That only happens if the log worker is still running when we call
xfs_quiesce_attr(). The log worker is cancelled at the end of
xfs_quiesce_attr() by calling xfs_log_quiesce(), so just call it
early here and then we can remove the counter altogether.
Concurrent create, 50 million inodes, identical 16p/16GB virtual
machines on different physical hosts. Machine A has twice the CPU
cores per socket of machine B:
unpatched patched
machine A: 3m16s 2m00s
machine B: 4m04s 4m05s
Create rates:
unpatched patched
machine A: 282k+/-31k 468k+/-21k
machine B: 231k+/-8k 233k+/-11k
Concurrent rm of same 50 million inodes:
unpatched patched
machine A: 6m42s 2m33s
machine B: 4m47s 4m47s
The transaction rate on the fast machine went from just under
300k/sec to 700k/sec, which indicates just how much of a bottleneck
this atomic counter was.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Seeing massive cpu usage from xfs_agino_range() on one machine;
instruction level profiles look similar to another machine running
the same workload, only one machine is consuming 10x as much CPU as
the other and going much slower. The only real difference between
the two machines is core count per socket. Both are running
identical 16p/16GB virtual machine configurations
Machine A:
25.83% [k] xfs_agino_range
12.68% [k] __xfs_dir3_data_check
6.95% [k] xfs_verify_ino
6.78% [k] xfs_dir2_data_entry_tag_p
3.56% [k] xfs_buf_find
2.31% [k] xfs_verify_dir_ino
2.02% [k] xfs_dabuf_map.constprop.0
1.65% [k] xfs_ag_block_count
And takes around 13 minutes to remove 50 million inodes.
Machine B:
13.90% [k] __pv_queued_spin_lock_slowpath
3.76% [k] do_raw_spin_lock
2.83% [k] xfs_dir3_leaf_check_int
2.75% [k] xfs_agino_range
2.51% [k] __raw_callee_save___pv_queued_spin_unlock
2.18% [k] __xfs_dir3_data_check
2.02% [k] xfs_log_commit_cil
And takes around 5m30s to remove 50 million inodes.
Suspect is cacheline contention on m_sectbb_log which is used in one
of the macros in xfs_agino_range. This is a read-only variable but
shares a cacheline with m_active_trans which is a global atomic that
gets bounced all around the machine.
The workload is trying to run hundreds of thousands of transactions
per second and hence cacheline contention will be occurring on this
atomic counter. Hence xfs_agino_range() is likely just be an
innocent bystander as the cache coherency protocol fights over the
cacheline between CPU cores and sockets.
On machine A, this rearrangement of the struct xfs_mount
results in the profile changing to:
9.77% [kernel] [k] xfs_agino_range
6.27% [kernel] [k] __xfs_dir3_data_check
5.31% [kernel] [k] __pv_queued_spin_lock_slowpath
4.54% [kernel] [k] xfs_buf_find
3.79% [kernel] [k] do_raw_spin_lock
3.39% [kernel] [k] xfs_verify_ino
2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock
Vastly less CPU usage in xfs_agino_range(), but still 3x the amount
of machine B and still runs substantially slower than it should.
Current rm -rf of 50 million files:
vanilla patched
machine A 13m20s 6m42s
machine B 5m30s 5m02s
It's an improvement, hence indicating that separation and further
optimisation of read-only global filesystem data is worthwhile, but
it clearly isn't the underlying issue causing this specific
performance degradation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Shaokun Zhang reported that XFS was using substantial CPU time in
percpu_count_sum() when running a single threaded benchmark on
a high CPU count (128p) machine from xfs_mod_ifree(). The issue
is that the filesystem is empty when the benchmark runs, so inode
allocation is running with a very low inode free count.
With the percpu counter batching, this means comparisons when the
counter is less that 128 * 256 = 32768 use the slow path of adding
up all the counters across the CPUs, and this is expensive on high
CPU count machines.
The summing in xfs_mod_ifree() is only used to fire an assert if an
underrun occurs. The error is ignored by the higher level code.
Hence this is really just debug code and we don't need to run it
on production kernels, nor do we need such debug checks to return
error values just to trigger an assert.
Finally, xfs_mod_icount/xfs_mod_ifree are only called from
xfs_trans_unreserve_and_mod_sb(), so get rid of them and just
directly call the percpu_counter_add/percpu_counter_compare
functions. The compare functions are now run only on debug builds as
they are internal to ASSERT() checks and so only compiled in when
ASSERTs are active (CONFIG_XFS_DEBUG=y or CONFIG_XFS_WARN=y).
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()
From: Dave Chinner <dchinner@redhat.com>
The error handling in xfs_trans_unreserve_and_mod_sb() is largely
incorrect - rolling back the changes in the transaction if only one
counter underruns makes all the other counters incorrect. We still
allow the change to proceed and committing the transaction, except
now we have multiple incorrect counters instead of a single
underflow.
Further, we don't actually report the error to the caller, so this
is completely silent except on debug kernels that will assert on
failure before we even get to the rollback code. Hence this error
handling is broken, untested, and largely unnecessary complexity.
Just remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There is a generic, kernel wide configuration symbol for enabling the
IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including
INTEL_IOMMU and AMD_IOMMU driver) select it so use it here as well.
This makes the conditional archdata.iommu field consistent with other
platforms and also fixes any compile test builds of other IOMMU drivers,
when INTEL_IOMMU or AMD_IOMMU are not selected).
For the case when INTEL_IOMMU/AMD_IOMMU and COMPILE_TEST are not
selected, this should create functionally equivalent code/choice. With
COMPILE_TEST this field could appear if other IOMMU drivers are chosen
but neither INTEL_IOMMU nor AMD_IOMMU are not.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200518120855.27822-2-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a generic, kernel wide configuration symbol for enabling the
IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including
INTEL_IOMMU driver) select it so use it here as well.
This makes the conditional archdata.iommu field consistent with other
platforms and also fixes any compile test builds of other IOMMU drivers,
when INTEL_IOMMU is not selected).
For the case when INTEL_IOMMU and COMPILE_TEST are not selected, this
should create functionally equivalent code/choice. With COMPILE_TEST
this field could appear if other IOMMU drivers are chosen but
INTEL_IOMMU not.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200518120855.27822-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
We already have two conditionals inside the outer one to check
if the command is GPIO_GET_LINEINFO_WATCH_IOCTL. I think it's
time to actually do what I have proposed in the first place, i.e.
to separate GPIO_GET_LINEINFO_WATCH_IOCTL from GPIO_GET_LINEINFO_IOCTL.
It's +13 LOCs, and surprisingly only +13 bytes of binary on x86_32,
but for the price of much better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200525194028.74236-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Linux 5.7-rc7
|
|
Remove duplicate headers which are included twice.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fixes: 02a95dee8cf0 ("NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This patch corrects the SPDX License Identifier style in
header file related to NFS Client support.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fixes coccicheck warning:
include/linux/nfs4.h:298:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fix off-by-one issues in 'rpc_ntop6':
- 'snprintf' returns the number of characters which would have been
written if enough space had been available, excluding the terminating
null byte. Thus, a return value of 'sizeof(scopebuf)' means that the
last character was dropped.
- 'strcat' adds a terminating null byte to the string, thus if len ==
buflen, the null byte is written past the end of the buffer.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In nfs3_proc_lookup, if nfs_alloc_fattr fails, will only print
"NFS call lookup". This may be confusing, move dprintk after
nfs_alloc_fattr.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The data structure member "wq->rescuer" was reset to a null pointer
in one if branch. It was passed to a call of the function "kfree"
in the callback function "rcu_free_wq" (which was eventually executed).
The function "kfree" does not perform more meaningful data processing
for a passed null pointer (besides immediately returning from such a call).
Thus delete this function call which became unnecessary with the referenced
software update.
Fixes: def98c84b6cd ("workqueue: Fix spurious sanity check failures in destroy_workqueue()")
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This long-overdue patchset adds missing system suspend/resume support
and hardens the IPC to solve module load/unload issues on specific
devices such as Cyan Chromebook. With this series SOF is finally
iso-feature with the legacy driver. Thanks to Ranjani and Keyon for
the basic patches and Enric for testing.
The last part needed for Baytrail/Cherrytrail is simplification of the
driver/card names and turn-key UCM support (on-going work with
Jaroslav).
Keyon Jie (1):
ASoC: SOF: Intel: BYT: harden IPC initialization and handling
Pierre-Louis Bossart (3):
ASoC: Intel: bytcr_rt5640/51: remove .ignore_suspend
ASoC: Intel: byt/cht: add .pm_ops
ASoC: SOF: Intel: BYT: mask BUSY or DONE interrupts in handler
Ranjani Sridharan (4):
ASoC: SOF: Intel: byt: Add PM callbacks
ASoC: SOF: pm: handle resume on legacy Intel platforms
ASoC: SOF: ipc: ignore DSP replies received when they are not expected
ASoC: SOF: Intel: BYT: add .remove op
sound/soc/intel/boards/bytcht_cx2072x.c | 3 +
sound/soc/intel/boards/bytcht_da7213.c | 3 +
sound/soc/intel/boards/bytcht_es8316.c | 3 +
sound/soc/intel/boards/bytcr_rt5640.c | 7 +-
sound/soc/intel/boards/bytcr_rt5651.c | 6 +-
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 3 +
sound/soc/intel/boards/cht_bsw_nau8824.c | 3 +
sound/soc/intel/boards/cht_bsw_rt5645.c | 3 +
sound/soc/intel/boards/cht_bsw_rt5672.c | 3 +
sound/soc/sof/intel/byt.c | 116 ++++++++++++++-----
sound/soc/sof/ipc.c | 9 +-
sound/soc/sof/pm.c | 8 +-
sound/soc/sof/sof-priv.h | 2 +-
13 files changed, 122 insertions(+), 47 deletions(-)
base-commit: 0d71a5cf691a8226151ceeb79fb872925f053df5
--
2.20.1
|
|
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200527030210.124393-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the warnings when using the W=1 compiler flag.
sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’:
sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
570 | int ret = 0;
| ^~~
This was set but only used in case where the reset GPIO is not defined.
Have the function return the value of ret.
sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’:
sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF ||
| ^
sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V ||
This condition will not occur since if the dt property is not set then
the *_source variable is set to the default value. So there is no way
that *_source can be less then 0. Which is what each #define is set to.
The code just needs to make sure that the dt property is not out of the
upper bounds.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526175247.15309-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200527024625.9937-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200527084326.4131-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to configure the GPI pins to the specific configuration.
The pins can be disabled or be configured as data input for any of the
digital mic channels. In addition the GPI can be used a a general
purpose input, a Master clock input or an ASI input for daisy chaining
devices.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an array property that configures the General Purpose Input (GPI)
register. The device has 4 GPI pins and each pin can be configured in 1
of 7 different ways.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200527084610.4790-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio: updates for v5.8 - part 2
- fix the initialization ordering in gpio-max730x
- make gpio-pxa buildable for compile testing
- make gpio-pca953x buildable as a module
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio fixes for v5.7
- fix mutex and spinlock ordering in gpio-mlxbf2
- fix the return value checks on devm_platform_ioremap_resource in
gpio-pxa and gpio-bcm-kona
|
|
On probe and reset, we should not touch the SHIM_IMRD register since
it is configured by firmware.
The driver only configures SHIM_IMRX with the BUSY interrupt enabled
by default and DONE interrupt disabled. When sending an IPC message,
the DONE interrupt is enabled until the DSP response is provided.
This sequence hardens the IPC communication and avoid
interrupt-related issues when adding/removing modules or during system
suspend-resume transitions.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
