| Age | Commit message (Collapse) | Author |
|---|
|
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
Fixes: 58e1b66b4e4b ("mptcp: pm: do not remove already closed subflows")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// 3WHS is OK
+0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey>
+0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]>
+0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]>
+0 accept(3, ..., ...) = 4
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
+0.1 read(4, ..., 500) = 500
+0 write(4, ..., 100) = 100
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Fixes: dea2b1ea9c70 ("mptcp: do not reset MP_CAPABLE subflow on mapping errors")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/518 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#name-fallback [2]
Link: https://github.com/multipath-tcp/packetdrill [3]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/519 [4]
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-3-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Modules linked in:
CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff
RSP: 0018:ffffc90000006db8 EFLAGS: 00010246
RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00
RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0
RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8
R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000
R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5
FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
move_skbs_to_msk net/mptcp/protocol.c:811 [inline]
mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854
subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490
tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283
tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350
ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5662 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6107
__napi_poll+0xcb/0x490 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6962
handle_softirqs+0x2c5/0x980 kernel/softirq.c:554
do_softirq+0x11b/0x1e0 kernel/softirq.c:455
</IRQ>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451
dev_queue_xmit include/linux/netdevice.h:3094 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536
__tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline]
tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752
__tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015
tcp_push_pending_frames include/net/tcp.h:2107 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline]
tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
sk_backlog_rcv include/net/sock.h:1113 [inline]
__release_sock+0x214/0x350 net/core/sock.c:3072
release_sock+0x61/0x1f0 net/core/sock.c:3626
mptcp_push_release net/mptcp/protocol.c:1486 [inline]
__mptcp_push_pending+0x6b5/0x9f0 net/mptcp/protocol.c:1625
mptcp_sendmsg+0x10bb/0x1b10 net/mptcp/protocol.c:1903
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2603
___sys_sendmsg net/socket.c:2657 [inline]
__sys_sendmsg+0x2aa/0x390 net/socket.c:2686
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb06e9317f9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe2cfd4f98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fb06e97f468 RCX: 00007fb06e9317f9
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 00007fb06e97f446 R08: 0000555500000000 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007fb06e97f406
R13: 0000000000000001 R14: 00007ffe2cfd4fe0 R15: 0000000000000003
</TASK>
Additionally syzkaller provided a nice reproducer. The repro enables
pmtu on the loopback device, leading to tcp_mtu_probe() generating
very large probe packets.
tcp_can_coalesce_send_queue_head() currently does not check for
mptcp-level invariants, and allowed the creation of cross-DSS probes,
leading to the mentioned corruption.
Address the issue teaching tcp_can_coalesce_send_queue_head() about
mptcp using the tcp_skb_can_collapse(), also reducing the code
duplication.
Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions")
Cc: stable@vger.kernel.org
Reported-by: syzbot+d1bff73460e33101f0e7@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/513
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-2-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A warning is triggered when there is insufficient space in the buffer
for userdata. However, this is not an issue since userdata will be sent
in the next iteration.
Current warning message:
------------[ cut here ]------------
WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0
? write_ext_msg+0x3b6/0x3d0
console_flush_all+0x1e9/0x330
The code incorrectly issues a warning when this_chunk is zero, which is
a valid scenario. The warning should only be triggered when this_chunk
is negative.
Fixes: 1ec9daf95093 ("net: netconsole: append userdata to fragmented netconsole messages")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008094325.896208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of a tc mirred action from one switch to another, the behavior
is not correct. We simply tell the source switch driver to program a
mirroring entry towards mirror->to_local_port = to_dp->index, but it is
not even guaranteed that the to_dp belongs to the same switch as dp.
For proper cross-chip support, we would need to go through the
cross-chip notifier layer in switch.c, program the entry on cascade
ports, and introduce new, explicit API for cross-chip mirroring, given
that intermediary switches should have introspection into the DSA tags
passed through the cascade port (and not just program a port mirror on
the entire cascade port). None of that exists today.
Reject what is not implemented so that user space is not misled into
thinking it works.
Fixes: f50f212749e8 ("net: dsa: Add plumbing for port mirroring")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241008094320.3340980-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on
these platforms fec_ptp_init() is not called and the related members
in fep are not initialized. However, fec_ptp_save_state() is called
unconditionally, which causes the kernel to panic. Therefore, add a
condition so that fec_ptp_save_state() is not called if PTP is not
supported.
Fixes: a1477dc87dc4 ("net: fec: Restart PPS after link state change")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/353e41fe-6bb4-4ee9-9980-2da2a9c1c508@roeck-us.net/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241008061153.1977930-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's done in probe so it should be undone here.
Fixes: 1d3bb996481e ("Device tree aware EMAC driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20241008233050.9422-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is racy issue between smb2 session log off and smb2 session setup.
It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece
count to session struct not to free session while it is being used.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25282
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add error handling from calling fixed_phy_register.
It may return some error, therefore, need to check the status.
And fixed_phy_register needs to bind a device node for mdio.
Add the mac device node for fixed_phy_register function.
This is a reference to this function, of_phy_register_fixed_link().
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20241007032435.787892-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an ID of a branch's child is greater than current maximum, we should
set new maximum to the child's ID, instead of its parent's.
Fixes: 2dc66a5ab2c6 ("clk: rockchip: rk3588: fix CLK_NR_CLKS usage")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20240912133204.29089-2-ziyao@disroot.org
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes, 5 of which are c:stable. All singletons, about half of
which are MM"
* tag 'mm-hotfixes-stable-2024-10-09-15-46' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: zswap: delete comments for "value" member of 'struct zswap_entry'.
CREDITS: sort alphabetically by name
secretmem: disable memfd_secret() if arch cannot set direct map
.mailmap: update Fangrui's email
mm/huge_memory: check pmd_special() only after pmd_present()
resource, kunit: fix user-after-free in resource_test_region_intersects()
fs/proc/kcore.c: allow translation of physical memory addresses
selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test
device-dax: correct pgoff align in dax_set_mapping()
kthread: unpark only parked kthread
Revert "mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN"
bcachefs: do not use PF_MEMALLOC_NORECLAIM
|
|
Disable NVME_CC_CRIME so that CSTS.RDY indicates that the media
is ready and able to handle commands without returning
NVME_SC_ADMIN_COMMAND_MEDIA_NOT_READY.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
meta iifname veth0 ip daddr ... fib daddr oif
... is expected to return "dummy0" interface which is part of same vrf
as veth0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We need to init l3mdev unconditionally, else main routing table is searched
and incorrect result is returned unless strict (iif keyword) matching is
requested.
Next patch adds a selftest for this.
Fixes: 2a8a7c0eaa87 ("netfilter: nft_fib: Fix for rpath check with VRF devices")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.
Check all UNSPEC matches and targets for similar issues:
- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.
Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.
The MARK target is also used by arptables, so register for NFPROTO_ARP too.
While at it, bail out if connbytes fails to enable the corresponding
conntrack family.
This change passes the selftests in iptables.git.
Reported-by: syzbot+256c348558aa5cf611a9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netfilter-devel/66fec2e2.050a0220.9ec68.0047.GAE@google.com/
Fixes: 0269ea493734 ("netfilter: xtables: add cluster match")
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
inode_bit_waitqueue() is changing - this update clears the way for
sched changes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Like how we already do when the allocator seems to be stuck, check if
we're waiting too long for a journal reservation and print some debug
info.
This is specifically to track down
https://github.com/koverstreet/bcachefs/issues/656
which is showing up in userspace where we don't have sysfs/debugfs to
get the journal debug info.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a closure version of wait_event_timeout(), with the same semantics.
The closure version is useful because unlike wait_event(), it allows
blocking code to run in the conditional expression.
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We increased write ref, if the fs went to RO, that would lead to
a deadlock, it actually happens:
00171 ========= TEST generic/279
00171
00172 bcachefs (vdb): starting version 1.12: rebalance_work_acct_fix opts=nocow
00172 bcachefs (vdb): recovering from clean shutdown, journal seq 35
00172 bcachefs (vdb): accounting_read... done
00172 bcachefs (vdb): alloc_read... done
00172 bcachefs (vdb): stripes_read... done
00172 bcachefs (vdb): snapshots_read... done
00172 bcachefs (vdb): journal_replay... done
00172 bcachefs (vdb): resume_logged_ops... done
00172 bcachefs (vdb): going read-write
00172 bcachefs (vdb): done starting filesystem
00172 FSTYP -- bcachefs
00172 PLATFORM -- Linux/aarch64 farm3-kvm 6.11.0-rc1-ktest-g3e290a0b8e34 #7030 SMP Tue Oct 8 14:15:12 UTC 2024
00172 MKFS_OPTIONS -- --nocow /dev/vdc
00172 MOUNT_OPTIONS -- /dev/vdc /mnt/scratch
00172
00172 bcachefs (vdc): starting version 1.12: rebalance_work_acct_fix opts=nocow
00172 bcachefs (vdc): initializing new filesystem
00172 bcachefs (vdc): going read-write
00172 bcachefs (vdc): marking superblocks
00172 bcachefs (vdc): initializing freespace
00172 bcachefs (vdc): done initializing freespace
00172 bcachefs (vdc): reading snapshots table
00172 bcachefs (vdc): reading snapshots done
00172 bcachefs (vdc): done starting filesystem
00173 bcachefs (vdc): shutting down
00173 bcachefs (vdc): going read-only
00173 bcachefs (vdc): finished waiting for writes to stop
00173 bcachefs (vdc): flushing journal and stopping allocators, journal seq 4
00173 bcachefs (vdc): flushing journal and stopping allocators complete, journal seq 6
00173 bcachefs (vdc): shutdown complete, journal seq 7
00173 bcachefs (vdc): marking filesystem clean
00173 bcachefs (vdc): shutdown complete
00173 bcachefs (vdb): shutting down
00173 bcachefs (vdb): going read-only
00361 INFO: task umount:6180 blocked for more than 122 seconds.
00361 Not tainted 6.11.0-rc1-ktest-g3e290a0b8e34 #7030
00361 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
00361 task:umount state:D stack:0 pid:6180 tgid:6180 ppid:6176 flags:0x00000004
00361 Call trace:
00362 __switch_to (arch/arm64/kernel/process.c:556)
00362 __schedule (kernel/sched/core.c:5191 kernel/sched/core.c:6529)
00363 schedule (include/asm-generic/bitops/generic-non-atomic.h:128 include/linux/thread_info.h:192 include/linux/sched.h:2084 kernel/sched/core.c:6608 kernel/sched/core.c:6621)
00365 bch2_fs_read_only (fs/bcachefs/super.c:346 (discriminator 41))
00367 __bch2_fs_stop (fs/bcachefs/super.c:620)
00368 bch2_put_super (fs/bcachefs/fs.c:1942)
00369 generic_shutdown_super (include/linux/list.h:373 (discriminator 2) fs/super.c:650 (discriminator 2))
00371 bch2_kill_sb (fs/bcachefs/fs.c:2170)
00372 deactivate_locked_super (fs/super.c:434 fs/super.c:475)
00373 deactivate_super (fs/super.c:508)
00374 cleanup_mnt (fs/namespace.c:250 fs/namespace.c:1374)
00376 __cleanup_mnt (fs/namespace.c:1381)
00376 task_work_run (include/linux/sched.h:2024 kernel/task_work.c:224)
00377 do_notify_resume (include/linux/resume_user_mode.h:50 arch/arm64/kernel/entry-common.c:151)
00377 el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:171 arch/arm64/kernel/entry-common.c:178 arch/arm64/kernel/entry-common.c:713)
00377 el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:731)
00378 el0t_64_sync (arch/arm64/kernel/entry.S:598)
00378 INFO: task tee:6182 blocked for more than 122 seconds.
00378 Not tainted 6.11.0-rc1-ktest-g3e290a0b8e34 #7030
00378 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
00378 task:tee state:D stack:0 pid:6182 tgid:6182 ppid:533 flags:0x00000004
00378 Call trace:
00378 __switch_to (arch/arm64/kernel/process.c:556)
00378 __schedule (kernel/sched/core.c:5191 kernel/sched/core.c:6529)
00378 schedule (include/asm-generic/bitops/generic-non-atomic.h:128 include/linux/thread_info.h:192 include/linux/sched.h:2084 kernel/sched/core.c:6608 kernel/sched/core.c:6621)
00378 schedule_preempt_disabled (kernel/sched/core.c:6680)
00379 rwsem_down_read_slowpath (kernel/locking/rwsem.c:1073 (discriminator 1))
00379 down_read (kernel/locking/rwsem.c:1529)
00381 bch2_gc_gens (fs/bcachefs/sb-members.h:77 fs/bcachefs/sb-members.h:88 fs/bcachefs/sb-members.h:128 fs/bcachefs/btree_gc.c:1240)
00383 bch2_fs_store_inner (fs/bcachefs/sysfs.c:473)
00385 bch2_fs_internal_store (fs/bcachefs/sysfs.c:417 fs/bcachefs/sysfs.c:580 fs/bcachefs/sysfs.c:576)
00386 sysfs_kf_write (fs/sysfs/file.c:137)
00387 kernfs_fop_write_iter (fs/kernfs/file.c:334)
00389 vfs_write (fs/read_write.c:497 fs/read_write.c:590)
00390 ksys_write (fs/read_write.c:643)
00391 __arm64_sys_write (fs/read_write.c:652)
00391 invoke_syscall.constprop.0 (arch/arm64/include/asm/syscall.h:61 arch/arm64/kernel/syscall.c:54)
00392 do_el0_svc (include/linux/thread_info.h:127 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2) arch/arm64/kernel/syscall.c:151 (discriminator 2))
00392 el0_svc (arch/arm64/include/asm/irqflags.h:55 arch/arm64/include/asm/irqflags.h:76 arch/arm64/kernel/entry-common.c:165 arch/arm64/kernel/entry-common.c:178 arch/arm64/kernel/entry-common.c:713)
00392 el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:731)
00392 el0t_64_sync (arch/arm64/kernel/entry.S:598)
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch adds a bounds check to the bch2_opt_to_text function to prevent
NULL pointer dereferences when accessing the opt->choices array. This
ensures that the index used is within valid bounds before dereferencing.
The new version enhances the readability.
Reported-and-tested-by: syzbot+37186860aa7812b331d5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=37186860aa7812b331d5
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We will get this if we wake up first:
Kernel panic - not syncing: btree_node_write_done leaked btree_trans
since there are still transactions waiting for cycle detectors after
BTREE_NODE_write_in_flight is cleared.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add check for read node's btree_id against BTREE_ID_NR_MAX in
try_read_btree_node to prevent triggering EBUG_ON condition in
bch2_btree_id_root[1].
[1] https://syzkaller.appspot.com/bug?extid=cf7b2215b5d70600ec00
Reported-by: syzbot+cf7b2215b5d70600ec00@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cf7b2215b5d70600ec00
Fixes: 4409b8081d16 ("bcachefs: Repair pass for scanning for btree nodes")
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Fix failure to validate that accounting replicas entries point to
valid devices: this wasn't a real bug since they'd be cleaned up by
GC, but is still something we should know about
- Fix failure to validate that dev_data_type entries point to valid
devices: this does fix a real bug, since bch2_accounting_read() would
then try to copy the counters to that device and pop an inconsistent
error when the device didn't exist
- Remove accounting entries that are zeroed or invalid: if we're not
validating them we need to get rid of them: they might not exist in
the superblock, so we need the to trigger the superblock mark path
when they're readded.
This fixes the replication.ktest rereplicate test, which was failing
with "superblock not marked for replicas..."
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fsck can now correctly check if inodes in interior snapshot nodes are
open/in use.
- Tweak the vfs inode rhashtable so that the subvolume ID isn't hashed,
meaning inums in different subvolumes will hash to the same slot. Note
that this is a hack, and will cause problems if anyone ever has the
same file in many different snapshots open all at the same time.
- Then check if any of those subvolumes is a descendent of the snapshot
ID being checked
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Dead code now.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's an inherent race in taking a snapshot while an unlinked file is
open, and then reattaching it in the child snapshot.
In the interior snapshot node the file will appear unlinked, as though
it should be deleted - it's not referenced by anything in that snapshot
- but we can't delete it, because the file data is referenced by the
child snapshot.
This was being handled incorrectly with
propagate_key_to_snapshot_leaves() - but that doesn't resolve the
fundamental inconsistency of "this file looks like it should be deleted
according to normal rules, but - ".
To fix this, we need to fix the rule for when an inode is deleted. The
previous rule, ignoring snapshots (there was no well-defined rule
for with snapshots) was:
Unlinked, non open files are deleted, either at recovery time or
during online fsck
The new rule is:
Unlinked, non open files, that do not exist in child snapshots, are
deleted.
To make this work transactionally, we add a new inode flag,
BCH_INODE_has_child_snapshot; it overrides BCH_INODE_unlinked when
considering whether to delete an inode, or put it on the deleted list.
For transactional consistency, clearing it handled by the inode trigger:
when deleting an inode we check if there are parent inodes which can now
have the BCH_INODE_has_child_snapshot flag cleared.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Made a minor edit in the comments for 'struct zswap_entry' to delete the
description of the 'value' member that was deleted in commit 20a5532ffa53
("mm: remove code to handle same filled pages").
Link: https://lkml.kernel.org/r/20241002194213.30041-1-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Fixes: 20a5532ffa53 ("mm: remove code to handle same filled pages")
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Usama Arif <usamaarif642@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Re-sort few misplaced entries in the CREDITS file.
Link: https://lkml.kernel.org/r/20241002111932.46012-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/
[2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t
[3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/
Link: https://lkml.kernel.org/r/20241001080056.784735-1-roypat@amazon.co.uk
Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I'm leaving Google.
Link: https://lkml.kernel.org/r/20240927192912.31532-1-i@maskray.me
Signed-off-by: Fangrui Song <i@maskray.me>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We should only check for pmd_special() after we made sure that we have a
present PMD. For example, if we have a migration PMD, pmd_special() might
indicate that we have a special PMD although we really don't.
This fixes confusing migration entries as PFN mappings, and not doing what
we are supposed to do in the "is_swap_pmd()" case further down in the
function -- including messing up COW, page table handling and accounting.
Link: https://lkml.kernel.org/r/20240926154234.2247217-1-david@redhat.com
Fixes: bc02afbd4d73 ("mm/fork: accept huge pfnmap entries")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+bf2c35fa302ebe3c7471@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/66f15c8d.050a0220.c23dd.000f.GAE@google.com/
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In resource_test_insert_resource(), the pointer is used in error message
after kfree(). This is user-after-free. To fix this, we need to call
kunit_add_action_or_reset() to schedule memory freeing after usage. But
kunit_add_action_or_reset() itself may fail and free the memory. So, its
return value should be checked and abort the test for failure. Then, we
found that other usage of kunit_add_action_or_reset() in
resource_test_region_intersects() needs to be fixed too. We fix all these
user-after-free bugs in this patch.
Link: https://lkml.kernel.org/r/20240930070611.353338-1-ying.huang@intel.com
Fixes: 99185c10d5d9 ("resource, kunit: add test case for region_intersects()")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Kees Bakker <kees@ijzerbout.nl>
Closes: https://lore.kernel.org/lkml/87ldzaotcg.fsf@yhuang6-desk2.ccr.corp.intel.com/
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When /proc/kcore is read an attempt to read the first two pages results in
HW-specific page swap on s390 and another (so called prefix) pages are
accessed instead. That leads to a wrong read.
Allow architecture-specific translation of memory addresses using
kc_xlate_dev_mem_ptr() and kc_unxlate_dev_mem_ptr() callbacks similarily
to /dev/mem xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() callbacks. That
way an architecture can deal with specific physical memory ranges.
Re-use the existing /dev/mem callback implementation on s390, which
handles the described prefix pages swapping correctly.
For other architectures the default callback is basically NOP. It is
expected the condition (vaddr == __va(__pa(vaddr))) always holds true for
KCORE_RAM memory type.
Link: https://lkml.kernel.org/r/20240930122119.1651546-1-agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
Link: https://lkml.kernel.org/r/23c02a03e8d666fef11bbe13e85c69c8b4ca0624.1727421694.git.llfl@linux.alibaba.com
Fixes: b9b5777f09be ("device-dax: use ALIGN() for determining pgoff")
Signed-off-by: Kun(llfl) <llfl@linux.alibaba.com>
Tested-by: JianXiong Zhao <zhaojianxiong.zjx@alibaba-inc.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
Link: https://lkml.kernel.org/r/20240913214634.12557-1-frederic@kernel.org
Fixes: 5c25b5ff89f0 ("workqueue: Tag bound workers with KTHREAD_IS_PER_CPU")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Tested-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit eab0af905bfc3e9c05da2ca163d76a1513159aa4.
There is no existing user of those flags. PF_MEMALLOC_NOWARN is dangerous
because a nested allocation context can use GFP_NOFAIL which could cause
unexpected failure. Such a code would be hard to maintain because it
could be deeper in the call chain.
PF_MEMALLOC_NORECLAIM has been added even when it was pointed out [1] that
such a allocation contex is inherently unsafe if the context doesn't fully
control all allocations called from this context.
While PF_MEMALLOC_NOWARN is not dangerous the way PF_MEMALLOC_NORECLAIM is
it doesn't have any user and as Matthew has pointed out we are running out
of those flags so better reclaim it without any real users.
[1] https://lore.kernel.org/all/ZcM0xtlKbAOFjv5n@tiehlicka/
Link: https://lkml.kernel.org/r/20240926172940.167084-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "remove PF_MEMALLOC_NORECLAIM" v3.
This patch (of 2):
bch2_new_inode relies on PF_MEMALLOC_NORECLAIM to try to allocate a new
inode to achieve GFP_NOWAIT semantic while holding locks. If this
allocation fails it will drop locks and use GFP_NOFS allocation context.
We would like to drop PF_MEMALLOC_NORECLAIM because it is really
dangerous to use if the caller doesn't control the full call chain with
this flag set. E.g. if any of the function down the chain needed
GFP_NOFAIL request the PF_MEMALLOC_NORECLAIM would override this and
cause unexpected failure.
While this is not the case in this particular case using the scoped gfp
semantic is not really needed bacause we can easily pus the allocation
context down the chain without too much clutter.
[akpm@linux-foundation.org: fix kerneldoc warnings]
Link: https://lkml.kernel.org/r/20240926172940.167084-1-mhocko@kernel.org
Link: https://lkml.kernel.org/r/20240926172940.167084-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz> # For vfs changes
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Disabling preemption in the GRU driver is unnecessary, and clashes with
sleeping locks in several code paths. Remove preempt_disable and
preempt_enable from the GRU driver.
Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After the delegation is returned to the NFS server remove it
from the server's delegations list to reduce the time it takes
to scan this list.
Network trace captured while running the below script shows the
time taken to service the CB_RECALL increases gradually due to
the overhead of traversing the delegation list in
nfs_delegation_find_inode_server.
The NFS server in this test is a Solaris server which issues
CB_RECALL when receiving the all-zero stateid in the SETATTR.
mount=/mnt/data
for i in $(seq 1 20)
do
echo $i
mkdir $mount/testtarfile$i
time tar -C $mount/testtarfile$i -xf 5000_files.tar
done
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode fix from Gabriel Krisman Bertazi:
- Handle code-points with the Ignorable property as regular character
instead of treating them as an empty string (me)
* tag 'unicode-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: Don't special case ignorable code points
|
|
We don't need to handle them separately. Instead, just let them
decompose/casefold to themselves.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: David Vernet <void@manifault.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
Fixes: 39a67d49ba35 ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption.
Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Tested-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Tested-by: Richard <hobbes1069@gmail.com>
Tested-by: Skyler <skpu@pm.me>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Closes: https://lore.kernel.org/all/3b129b1f-8636-456a-80b4-0f6cce0eef63@hixontech.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219331
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.
However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:
working conf. (windows): Pin-ctls: 0x80: HP
not working (linux): Pin-ctls: 0xc0: OUT HP
This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A user reported that commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi
device manage_system_start_stop") introduced a spin down + immediate spin
up of the disk both when entering and when resuming from hibernation.
This behavior was not there before, and causes an increased latency both
when entering and when resuming from hibernation.
Hibernation is done by three consecutive PM events, in the following order:
1) PM_EVENT_FREEZE
2) PM_EVENT_THAW
3) PM_EVENT_HIBERNATE
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") modified ata_eh_handle_port_suspend() to call
ata_dev_power_set_standby() (which spins down the disk), for both event
PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE.
Documentation/driver-api/pm/devices.rst, section "Entering Hibernation",
explicitly mentions that PM_EVENT_FREEZE does not have to be put the device
in a low-power state, and actually recommends not doing so. Thus, let's not
spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down
during the subsequent PM_EVENT_HIBERNATE event.)
This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb3a
("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while
PM_EVENT_HIBERNATE will continue to spin down the disk.
This will avoid the superfluous spin down + spin up when entering and
resuming from hibernation, while still making sure that the disk is spun
down before actually entering hibernation.
Cc: stable@vger.kernel.org # v6.6+
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
