summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-26arm64: Fix text patching logic when using fixmapMarc Zyngier
Patch 2f896d586610 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60 [ 32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84 [ 32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58 [ 32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34 [ 32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4 [ 32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laura Abbott <lauraa@codeaurora.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "I'm still testing more fixes, but I wanted to get out the fix for the btrfs raid5/6 memory corruption I mentioned in my merge window pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix allocation size calculations in alloc_btrfs_bio
2015-02-26arm64: crypto: increase AES interleave to 4xArd Biesheuvel
This patch increases the interleave factor for parallel AES modes to 4x. This improves performance on Cortex-A57 by ~35%. This is due to the 3-cycle latency of AES instructions on the A57's relatively deep pipeline (compared to Cortex-A53 where the AES instruction latency is only 2 cycles). At the same time, disable inline expansion of the core AES functions, as the performance benefit of this feature is negligible. Measured on AMD Seattle (using tcrypt.ko mode=500 sec=1): Baseline (2x interleave, inline expansion) ------------------------------------------ testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 95545 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 68496 operations in 1 seconds This patch (4x interleave, no inline expansion) ----------------------------------------------- testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 124735 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 92328 operations in 1 seconds Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: enable PTE type bit in the mask for pte_modifyFeng Kan
Caught during Trinity testing. The pte_modify does not allow modification for PTE type bit. This cause the test to hang the system. It is found that the PTE can't transit from an inaccessible page (b00) to a valid page (b11) because the mask does not allow it. This happens when a big block of mmaped memory is set the PROT_NONE, then the a small piece is broken off and set to PROT_WRITE | PROT_READ cause a huge page split. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: mm: remove unused functions and variable protoypesYingjoe Chen
The functions __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range were removed in commit fa48e6f780 'arm64: mm: Optimise tlb flush logic where we have >4K granule'. Global variable cpu_tlb was never used in arm64. Remove them. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: psci: move psci firmware calls out of lineWill Deacon
An arm64 allmodconfig fails to build with GCC 5 due to __asmeq assertions in the PSCI firmware calling code firing due to mcount preambles breaking our assumptions about register allocation of function arguments: /tmp/ccDqJsJ6.s: Assembler messages: /tmp/ccDqJsJ6.s:60: Error: .err encountered /tmp/ccDqJsJ6.s:61: Error: .err encountered /tmp/ccDqJsJ6.s:62: Error: .err encountered /tmp/ccDqJsJ6.s:99: Error: .err encountered /tmp/ccDqJsJ6.s:100: Error: .err encountered /tmp/ccDqJsJ6.s:101: Error: .err encountered This patch fixes the issue by moving the PSCI calls out-of-line into their own assembly files, which are safe from the compiler's meddling fingers. Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26arm64: vdso: minor ABI fix for clock_getresNathan Lynch
The vdso implementation of clock_getres currently returns 0 (success) whenever a null timespec is provided by the caller, regardless of the clock id supplied. This behavior is incorrect. It should fall back to syscall when an unrecognized clock id is passed, even when the timespec argument is null. This ensures that clock_getres always returns an error for invalid clock ids. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-02-26drm/i915: Add media rc6 residency file to sysfsVille Syrjälä
On VLV/CHV the media well rc6 residency gets reported separately from the render well, so add another file to sysfs so that we can report the residency to the user. Testcase: igt/pm_rc6_residency --run-subtest media-rc6-accuracy Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26USB: pl2303: disable break on shutdownJohan Hovold
Currently an enabled break state is not disabled on final close nor on re-open and has to be disabled manually. Fix this by disabling break on port shutdown. Reported-by: Jari Ruusu <jariruusu@users.sourceforge.net> Tested-by: Jari Ruusu <jariruusu@users.sourceforge.net> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: mxuport: fix null deref when used as a consoleJohan Hovold
Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable <stable@vger.kernel.org> # v3.14 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: clean up bus probe error handlingJohan Hovold
Clean up bus probe error handling by separating success and error paths. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: serial: fix port attribute-creation raceJohan Hovold
Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix tty-device error handling at probeJohan Hovold
Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai <tiwai@suse.de> Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix potential use-after-free after failed probeJohan Hovold
Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Cc: stable <stable@vger.kernel.org> # v2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: console: add dummy __module_getJohan Hovold
Add call to __module_get when initialising the fake tty in usb_console_setup to match the module_put in release_one_tty. Note that the tty-driver (i.e. usb-serial core) must be compiled-in to enable the usb console so the __module_get is essentially a noop as driver->owner will be null. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <mark@actisense.com> Cc: stable <stable@vger.kernel.org> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26Revert "USB: serial: make bulk_out_size a lower limit"Johan Hovold
This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" <elvin.li@intel.com> Cc: stable <stable@vger.kernel.org> # v3.15 Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26ARM: multi_v7_defconfig: Enable shmobile platformsGeert Uytterhoeven
Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-26drm/i915: Add missing description to parameter in alloc_pt_rangeMichel Thierry
The patch "drm/i915: Plumb drm_device through page tables operations" added an extra parameter, but it didn't update the function description. Also remove unnecessary blank line added by the same patch. Found by kbuild test robot. Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functionsAkash Goel
The frequency values(Rp0, Rp1, Rpn) reported by RP_STATE_CAP register are stored, initially by the Driver, inside the dev_priv->rps structure. Since these values are expected to remain same throughout, there is no real need to read this register, on dynamic basis, from certain debugfs/sysfs functions and the values can be instead retrieved from the dev_priv->rps structure when needed. For the i915_frequency_info debugfs interface, the frequency values from the RP_STATE_CAP register only should be used, to indicate the actual Hw state, since it is principally used for the debugging purpose. v2: Reverted the changes in i915_frequency_info function, to continue report back the frequency values, as per the actual Hw state (Chris) Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26drm/i915: Look at staged config when fixing pipe_src_w for LVDSAnder Conselvan de Oliveira
The code in function intel_crtc_compute_config() that evens pipe_src_w if necessary would look at the current config instead of the staged one when deciding if there is an LVDS encoder in use. This could potentially lead to the value not being updated, if during the modeset a crtc wasn't driving an LVDS encoder. Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26drm: atmel-hlcdc: remove clock polarity from crtc driverNicolas Ferre
Remove this configuration bit in crtc driver as the rising edge clock is widely used. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-26i40e: check pointers before useShannon Nelson
Make sure we don't try to dereference NULL pointers when returning values from the AdminQ calls. Change-ID: Ia6694f2f415d50acf0aba063c863568742799aff Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: catch NVM write semaphore timeout and retryShannon Nelson
In some circumstances, a multi-write transaction takes longer than the default 3 minute timeout on the write semaphore. If the write failed with an EBUSY status, this is likely the problem, so here we try to reacquire the semaphore then retry the write. We only do one retry, then give up. Change-ID: I1c8be60688acc2f39573839579baf601207c4a36 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: stop flow director on shutdownMitch A Williams
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: I1bd9fc7fd8f151fe24cad132ac9adddab923e3af Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: disconnect irqs on shutdownShannon Nelson
Combine the ICR0 shutdown with the standard interrupt shutdown, and add the interrupt clearing to the PCI shutdown path. This prevents the driver from allowing stray interrupts or causing system logs from un-handled interrupts. Change-ID: I48f6ab95cad7f8ca77c1f26c92a51cc1034ced43 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40evf: TCP/IPv6 over Vxlan Tx checksum offload fixAnjali Singhai
We were checking the outer Protocol flags and deciding the flow for inner header. This patch fixes that. This fixes the Tx checksum offload for TCP/IPv6 over vxlan. Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Issue a PF reset if Tx queue disable timeoutParikh, Neerav
As part of DCB reconfiguration flow if the Tx queue disable times out then issue a PF reset to do some level of recovery. Change-ID: I7550021c55bff355351c0365e61e1f05fcaff46d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix the Tx ring qset handle when DCB reconfiguresParikh, Neerav
When DCB is reconfigured to single TC the driver did not reset the Tx ring Qset handle to the correct mapping; which caused Tx queue disable timeouts. Change-ID: I4da5915ec92a83c281b478d653fae6ef1b72edfe Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix the case where per TC queue count was higher than queues enabledAnjali Singhai
When the driver or hardware gets less interrupt vectors than the actual number of CPU cores, limit the queue count for the priority queue traffic class (TC) queues. This will fix a warning with multiple function mode where systems regularly have more cores than vectors. Also add extra comment for readability. Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: fix race in hang checkJesse Brandeburg
The driver was having some issues with false Tx hang detection. This makes the driver a little more direct with the checks for progress forward by directly checking the head write back address and tail register when determining progress. This avoids Tx hangs where the software gets behind, because we are directly checking hardware state when determining hang state. Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix TSO with more than 8 frags per segment issueAnjali Singhai
The hardware has some limitations the driver needs to adhere to, that we found in extended testing. 1) no more than 8 descriptors per packet on the wire 2) no header can span more than 3 descriptors If one of these events occurs, the hardware will generate an internal error and freeze the Tx queue. This patch linearizes the skb to avoid these situations. Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Don't check for Tx hang when PF downAkeem G Abodunrin
This patch adds check to bail out if device is already down when checking for Tx hang subtask. Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: fix shift precedence issueShannon Nelson
Add parens to make sure the shift and bitwise precedences don't work backwards for us. Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268 Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix memory leak at failure path in i40e_dbg_command_write()Alexey Khoroshilov
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed in i40e_dbg_command_write(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26ASoC: OMAP: mcbsp: Fix CLKX and CLKR pinmux when used as inputsThomas Niederprüm
This patch fixes faulty behaviour in a setup where the input clock for the SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must not be configured as output pin. Otherwise the input clock is messed up horribly. This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to inject a reference clock in setups where McBSP is master and not both rx and tx are used. However for this to work it has to be ensured that set_dai_sysclk() is called after set_dai_fmt(). This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject an external reference clock. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26ASoC: rt5677: Correct the routing paths of that after IF1/2 DACx MuxOder Chiou
The patch corrects the routing paths of that after IF1/2 DACx Mux Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26Merge tag 'topic/drm-misc-2015-02-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next misc atomic and dp macros * tag 'topic/drm-misc-2015-02-25' of git://anongit.freedesktop.org/drm-intel: drm: Adding edp1.4 specific dpcd macros drm/atomic-helpers: make mode_set hooks optional drm/atomic-helper: Rename commmit_post/pre_planes drm/atomic: Rename drm_atomic_helper_commit_pre_planes() state argument drm: If available use atomic state in getcrtc ioctl drm: Add DRM_DEBUG_ATOMIC drm/atomic-helpers: Fix documentation typos and wrong copy&paste drm: Fix the CRTC_STEREO_DOUBLE_ONLY define to include stero modes drm: Fix drm_crtc_vblank_get() documentation
2015-02-26genirq / PM: better describe IRQF_NO_SUSPEND semanticsMark Rutland
The IRQF_NO_SUSPEND flag is intended to be used for interrupts required to be enabled during the suspend-resume cycle. This mostly consists of IPIs and timer interrupts, potentially including chained irqchip interrupts if these are necessary to handle timers or IPIs. If an interrupt does not fall into one of the aforementioned categories, requesting it with IRQF_NO_SUSPEND is likely incorrect. Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the system from a suspended state. For an interrupt to be able to trigger a wakeup, it may be necessary to program various components of the system. In these cases it is necessary to use {enable,disabled}_irq_wake. Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that an IRQ can wake up the system, and the documentation can be read ambiguously w.r.t. this property. This patch updates the documentation regarding IRQF_NO_SUSPEND to make this caveat explicit, hopefully making future misuse rarer. Cleanup of existing misuse will occur as part of later patch series. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-26drm/i915: Ensure crtc_state backpointer is always initializedMatt Roper
As we transition to full atomic modesetting, we want to be able to pass intel_crtc_state around in various places that we pass intel_crtc directly today. Ensure that the ->crtc backpointer is properly initialized in case we need to get back to the associated CRTC. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26drm/i915: Use enabled value from crtc_state rather than crtc (v2)Matt Roper
As vendors transition their drivers from legacy to atomic there's some duplication of data between drm_crtc and drm_crtc_state (since unconverted drivers likely won't have a state structure). i915 is partially converted and does have a crtc->state structure, but still uses direct crtc fields internally in many places, which causes the two sets of data to get out of sync. As of commit commit 31c946e85ce6b48ce0f25e3cdca8362e4fe8b300 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Feb 22 12:24:17 2015 +0100 drm: If available use atomic state in getcrtc ioctl This way drivers fully converted to atomic don't need to update these legacy state variables in their modeset code any more. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> the DRM core starts assuming that the presence of a ->state structure implies that it should make use of the values stored there which, on i915, leads to the core code using stale values for CRTC 'enabled' status. Let's switch over to using the state value of 'enable' internally rather than using the drm_crtc field. This ensures that our driver internals are working from the same data that the DRM core is, avoiding mismatches. This patch was generated with Coccinelle using the following semantic patch: <smpl> @@ struct drm_crtc C; struct drm_crtc *CP; @@ ( - C.enabled + C.state->enable | - CP->enabled + CP->state->enable ) // For assignments, we still update the legacy value as well as the state value // so add an extra assignment statement for that. @@ struct drm_crtc C; struct drm_crtc *CP; expression E; @@ ( C.state->enable = E; + C.enabled = E; | CP->state->enable = E; + CP->enabled = E; ) </smpl> The crtc->mode and crtc->hwmode fields should probably be transitioned over as well eventually, but we seem to do an okay job of keeping those up-to-date already so I want to minimize the changes that will clash with Ander's in-progress atomic work. v2: Don't remove the assignments to the legacy value when we assign to the state value. A second cocci stanza takes care of adding the legacy assignment back where appropriate. (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25MAINTAINERS: update my email addressAndy Gospodarek
I have been signing off on patches with this address so I'll change it. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25amd-xgbe-phy: PHY KX/KR mode differencesTom Lendacky
The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25drm/i915: Cache ringbuf pointer in request structureJohn Harrison
In execlist mode, the ringbuf is a function of the ring and context whereas in legacy mode, it is derived from the ring alone. Thus the calculation required to determine the ringbuf pointer from the ring (and context) also needs to test execlist mode or not. This is messy. Further, the request structure holds a pointer to both the ring and the context for which it was created. Thus, given a request, it is possible to derive the ringbuf in either legacy or execlist mode. Hence it is necessary to pass just the request in to all the low level functions rather than some combination of request, ring, context and ringbuf. However, rather than recalculating it each time, it is much simpler to just cache the ringbuf pointer in the request structure itself. Caching the pointer means the calculation is done once at request creation time and all further code and simply read it directly from the request structure. OTC-Jira: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> [danvet: Drop contentless comment in lrc alloc request entirely. And spelling fix in the commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: Add missing trace point to LRC execbuff code pathJohn Harrison
There is a trace point in the legacy execbuffer execution path that is missing from the execlist path. Trace points are extremely useful for debugging and are used by various automated validation tests. Hence, this patch adds the missing trace point back in. OTC-Jira: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: Rename 'flags' to 'dispatch_flags' for better code readingJohn Harrison
There is a flags word that is passed through the execbuffer code path all the way from initial decoding of the user parameters down to the very final dispatch buffer call. It is simply called 'flags'. Unfortuantely, there are many other flags words floating around in the same blocks of code. Even more once the GPU scheduler arrives. This patch makes it more obvious exactly which flags word is which by renaming 'flags' to 'dispatch_flags'. Note that the bit definitions for this flags word already have an 'I915_DISPATCH_' prefix on them and so are not quite so ambiguous. OTC-Jira: VIZ-1587 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> [danvet: Resolve conflict with Chris' rework of the bb parsing.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/radeon: only enable DP audio if the monitor supports itAlex Deucher
We were enabling DP secondary streams even if the monitor didn't support them. Fixes display problems on some DP monitors. Tested-by: Jim Boz <jim876@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: fix atom aux payload size check for writes (v2)Alex Deucher
The atom aux param interface only supports 4 bits for the total write transfer size (header + payload). This limits us to 12 bytes of payload rather than 16. Add a check for this. Reads are not affected. v2: switch to WARN_ON_ONCE Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: fix 1 RB harvest config setup for TN/RLAlex Deucher
The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: enable SRBM timeout interrupt on EG/NIChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 16:45:32 +0000