| Age | Commit message (Collapse) | Author |
|---|
|
The array is sorted, so just move the elements and insert in order.
Fixes: 13ca628716c6 ("perf comm: Add reference count checking to 'struct comm_str'")
Reported-by: Matt Fleming <matt@readmodwrite.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Matt Fleming <matt@readmodwrite.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240703172117.810918-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Unique mount ids start past the last valid old mount id value to not
confuse the two. If a last mount id has been specified, reject any
invalid values early.
Link: https://lore.kernel.org/r/20240704-work-mount-fixes-v1-2-d007c990de5f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unique mount ids start past the last valid old mount id value to not
confuse the two so reject invalid values early in copy_mnt_id_req().
Link: https://lore.kernel.org/r/20240704-work-mount-fixes-v1-1-d007c990de5f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
|
|
This avoids having to return the length of the component entirely by
just doing all of the name processing in hash_name(). We can just
return the end of the path component, and a flag for the DOT and DOTDOT
cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of having separate calls to 'inode_permission()' depending on
whether we're in RCU lookup or not, just share the first call.
Note that the initial "conditional" on LOOKUP_RCU really turns into just
a "convert the LOOKUP_RCU bit in the nameidata into the MAY_NOT_BLOCK
bit in the argument", which is just a trivial bitwise and and shift
operation.
So the initial conditional goes away entirely, and then the likely case
is that it will succeed independently of us being in RCU lookup or not,
and the possible "we may need to fall out of RCU and redo it all" fixups
that are needed afterwards all go in the unlikely path.
[ This also marks 'nd' restrict, because that means that the compiler
can know that there is no other alias, and can cache the LOOKUP_RCU
value over the call to inode_permission(). ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
|
|
Pull smb client fix from Steve French:
"Fix for smb3 readahead performance regression"
* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix read-performance regression by dropping readahead expansion
|
|
Now working at Oracle.
Link: https://lkml.kernel.org/r/20240703092704.11571-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
compat
On a system with Perl 5.12.1, commit 5ef6dc08cfde
("lib/build_OID_registry: don't mention the full path of the script in
output") causes the build to fail with the error below.
Bareword found where operator expected at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
syntax error at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
Execution of ./lib/build_OID_registry aborted due to compilation errors.
make[3]: *** [lib/Makefile:352: lib/oid_registry_data.c] Error 255
Ahmad Fatoum analyzed that non-destructive substitution is only supported since
Perl 5.13.2. Instead of dropping `r` and having the side effect of modifying
`$0`, introduce a dedicated variable to support older Perl versions.
Link: https://lkml.kernel.org/r/20240702223512.8329-2-pmenzel@molgen.mpg.de
Link: https://lkml.kernel.org/r/20240701155802.75152-1-pmenzel@molgen.mpg.de
Fixes: 5ef6dc08cfde ("lib/build_OID_registry: don't mention the full path of the script in output")
Link: https://lore.kernel.org/all/259f7a87-2692-480e-9073-1c1c35b52f67@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A kernel warning was reported when pinning folio in CMA memory when
launching SEV virtual machine. The splat looks like:
[ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520
[ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6
[ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520
[ 464.325515] Call Trace:
[ 464.325520] <TASK>
[ 464.325523] ? __get_user_pages+0x423/0x520
[ 464.325528] ? __warn+0x81/0x130
[ 464.325536] ? __get_user_pages+0x423/0x520
[ 464.325541] ? report_bug+0x171/0x1a0
[ 464.325549] ? handle_bug+0x3c/0x70
[ 464.325554] ? exc_invalid_op+0x17/0x70
[ 464.325558] ? asm_exc_invalid_op+0x1a/0x20
[ 464.325567] ? __get_user_pages+0x423/0x520
[ 464.325575] __gup_longterm_locked+0x212/0x7a0
[ 464.325583] internal_get_user_pages_fast+0xfb/0x190
[ 464.325590] pin_user_pages_fast+0x47/0x60
[ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd]
[ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd]
Per the analysis done by yangge, when starting the SEV virtual machine, it
will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory.
But the page is in CMA area, so fast GUP will fail then fallback to the
slow path due to the longterm pinnalbe check in try_grab_folio().
The slow path will try to pin the pages then migrate them out of CMA area.
But the slow path also uses try_grab_folio() to pin the page, it will
also fail due to the same check then the above warning is triggered.
In addition, the try_grab_folio() is supposed to be used in fast path and
it elevates folio refcount by using add ref unless zero. We are guaranteed
to have at least one stable reference in slow path, so the simple atomic add
could be used. The performance difference should be trivial, but the
misuse may be confusing and misleading.
Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page()
to try_grab_folio(), and use them in the proper paths. This solves both
the abuse and the kernel warning.
The proper naming makes their usecase more clear and should prevent from
abusing in the future.
peterx said:
: The user will see the pin fails, for gpu-slow it further triggers the WARN
: right below that failure (as in the original report):
:
: folio = try_grab_folio(page, page_increm - 1,
: foll_flags);
: if (WARN_ON_ONCE(!folio)) { <------------------------ here
: /*
: * Release the 1st page ref if the
: * folio is problematic, fail hard.
: */
: gup_put_folio(page_folio(page), 1,
: foll_flags);
: ret = -EFAULT;
: goto out;
: }
[1] https://lore.kernel.org/linux-mm/1719478388-31917-1-git-send-email-yangge1116@126.com/
[shy828301@gmail.com: fix implicit declaration of function try_grab_folio_fast]
Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com
Link: https://lkml.kernel.org/r/20240628191458.2605553-1-yang@os.amperecomputing.com
Fixes: 57edfcfd3419 ("mm/gup: accelerate thp gup even for "pages != NULL"")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: yangge <yangge1116@126.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
|
|
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
-I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
cache_shape.c ...
Fixes: 5553a79387e9 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au
|
|
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240705141012.5368-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
[syzbot reported]
BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160
sized_strscpy+0xc4/0x160
copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411
hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3877 [inline]
slab_alloc_node mm/slub.c:3918 [inline]
kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065
kmalloc include/linux/slab.h:628 [inline]
hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Fix]
When allocating memory to strbuf, initialize memory to 0.
Reported-and-tested-by: syzbot+efde959319469ff8d4d7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_8BBB6433BC9E1C1B7B4BDF1BF52574BA8808@qq.com
Reported-and-tested-by: syzbot+01ade747b16e9c8030e0@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The method we used was predicated on the assumption that the mount
immediately following the root mount of the mount namespace would be the
rootfs mount of the namespace. That's not always the case though. For
example:
ID PARENT ID
408 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hosts /etc/hosts rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
409 414 0:61 / /dev/shm rw,nosuid,nodev,noexec,relatime - tmpfs shm rw,size=64000k,uid=1000,gid=1000,inode64
410 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/.containerenv /run/.containerenv rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
411 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hostname /etc/hostname rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
412 363 0:65 / / rw,relatime - overlay overlay rw,lowerdir=/home/user1/.local/share/containers/storage/overlay/l/JS65SUCGTPCP2EEBHLRP4UCFI5:/home/user1/.local/share/containers/storage/overlay/l/DLW22KVDWUNI4242D6SDJ5GKCL [...]
413 412 0:68 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw
414 412 0:69 / /dev rw,nosuid - tmpfs tmpfs rw,size=65536k,mode=755,uid=1000,gid=1000,inode64
415 412 0:70 / /sys ro,nosuid,nodev,noexec,relatime - sysfs sysfs rw
416 414 0:71 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666
417 414 0:67 / /dev/mqueue rw,nosuid,nodev,noexec,relatime - mqueue mqueue rw
418 415 0:27 / /sys/fs/cgroup ro,nosuid,nodev,noexec,relatime - cgroup2 cgroup2 rw,nsdelegate,memory_recursiveprot
419 414 0:6 /null /dev/null rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
420 414 0:6 /zero /dev/zero rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
422 414 0:6 /full /dev/full rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
423 414 0:6 /tty /dev/tty rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
430 414 0:6 /random /dev/random rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
431 414 0:6 /urandom /dev/urandom rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
433 413 0:72 / /proc/acpi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
440 413 0:6 /null /proc/kcore ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
441 413 0:6 /null /proc/keys ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
442 413 0:6 /null /proc/timer_list ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
443 413 0:73 / /proc/scsi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
444 415 0:74 / /sys/firmware ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
445 415 0:75 / /sys/dev/block ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
446 413 0:68 /bus /proc/bus ro,nosuid,nodev,noexec,relatime - proc proc rw
447 413 0:68 /fs /proc/fs ro,nosuid,nodev,noexec,relatime - proc proc rw
448 413 0:68 /irq /proc/irq ro,nosuid,nodev,noexec,relatime - proc proc rw
449 413 0:68 /sys /proc/sys ro,nosuid,nodev,noexec,relatime - proc proc rw
450 413 0:68 /sysrq-trigger /proc/sysrq-trigger ro,nosuid,nodev,noexec,relatime - proc proc rw
364 414 0:71 /0 /dev/console rw,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666
In this mount table the root mount of the mount namespace is the mount
with id 363 (It isn't visible because it's literally just what the
rootfs mount is mounted upon and usually it's just a copy of the real
rootfs).
The rootfs mount that's mounted on the root mount of the mount namespace
is the mount with id 412. But the mount namespace contains mounts that
were created before the rootfs mount and thus have earlier mount ids. So
the first call to listmnt_next() would return the mount with the mount
id 408 and not the rootfs mount.
So we need to find the actual rootfs mount mounted on the root mount of
the mount namespace. This logic is also present in mntns_install() where
vfs_path_lookup() is used. We can't use this though as we're holding the
namespace semaphore. We could look at the children of the root mount of
the mount namespace directly but that also seems a bit out of place
while we have the rbtree. So let's just iterate through the rbtree
starting from the root mount of the mount namespace and find the mount
whose parent is the root mount of the mount namespace. That mount will
usually appear very early in the rbtree and afaik there can only be one.
IOW, it would be very strange if we ended up with a root mount of a
mount namespace that has shadow mounts.
Fixes: 0a3deb11858a ("fs: Allow listmount() in foreign mount namespace") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Loss recovery undo_retrans bookkeeping had a long-standing bug where a
DSACK from a spurious TLP retransmit packet could cause an erroneous
undo of a fast recovery or RTO recovery that repaired a single
really-lost packet (in a sequence range outside that of the TLP
retransmit). Basically, because the loss recovery state machine didn't
account for the fact that it sent a TLP retransmit, the DSACK for the
TLP retransmit could erroneously be implicitly be interpreted as
corresponding to the normal fast recovery or RTO recovery retransmit
that plugged a real hole, thus resulting in an improper undo.
For example, consider the following buggy scenario where there is a
real packet loss but the congestion control response is improperly
undone because of this bug:
+ send packets P1, P2, P3, P4
+ P1 is really lost
+ send TLP retransmit of P4
+ receive SACK for original P2, P3, P4
+ enter fast recovery, fast-retransmit P1, increment undo_retrans to 1
+ receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!)
+ receive cumulative ACK for P1-P4 (fast retransmit plugged real hole)
The fix: when we initialize undo machinery in tcp_init_undo(), if
there is a TLP retransmit in flight, then increment tp->undo_retrans
so that we make sure that we receive a DSACK corresponding to the TLP
retransmit, as well as DSACKs for all later normal retransmits, before
triggering a loss recovery undo. Note that we also have to move the
line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO
we remember the tp->tlp_high_seq value until tcp_init_undo() and clear
it only afterward.
Also note that the bug dates back to the original 2013 TLP
implementation, commit 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)").
However, this patch will only compile and work correctly with kernels
that have tp->tlp_retrans, which was added only in v5.8 in 2020 in
commit 76be93fc0702 ("tcp: allow at most one TLP probe per flight").
So we associate this fix with that later commit.
Fixes: 76be93fc0702 ("tcp: allow at most one TLP probe per flight")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Kevin Yang <yyd@google.com>
Link: https://patch.msgid.link/20240703171246.1739561-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jason A. Donenfeld says:
====================
wireguard fixes for 6.10-rc7
These are four small fixes for WireGuard, which are all marked for
stable:
1) A QEMU command line fix to remove deprecated flags.
2) Use of proper unaligned helpers to avoid unaligned memory access on
some systems, from Helge.
3) Two patches to annotate intentional data races, so KCSAN and syzbot
don't get upset.
====================
Link: https://patch.msgid.link/20240704154517.1572127-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KCSAN reports a race in wg_packet_send_keepalive, which is intentional:
BUG: KCSAN: data-race in wg_packet_send_keepalive / wg_packet_send_staged_packets
write to 0xffff88814cd91280 of 8 bytes by task 3194 on cpu 0:
__skb_queue_head_init include/linux/skbuff.h:2162 [inline]
skb_queue_splice_init include/linux/skbuff.h:2248 [inline]
wg_packet_send_staged_packets+0xe5/0xad0 drivers/net/wireguard/send.c:351
wg_xmit+0x5b8/0x660 drivers/net/wireguard/device.c:218
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3564
__dev_queue_xmit+0xeff/0x1d80 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x231/0x2a0 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0xa66/0xce0 net/ipv6/ip6_output.c:137
ip6_finish_output+0x1a5/0x490 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ndisc_send_skb+0x4a2/0x670 net/ipv6/ndisc.c:509
ndisc_send_rs+0x3ab/0x3e0 net/ipv6/ndisc.c:719
addrconf_dad_completed+0x640/0x8e0 net/ipv6/addrconf.c:4295
addrconf_dad_work+0x891/0xbc0
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
worker_thread+0x525/0x730 kernel/workqueue.c:2787
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
read to 0xffff88814cd91280 of 8 bytes by task 3202 on cpu 1:
skb_queue_empty include/linux/skbuff.h:1798 [inline]
wg_packet_send_keepalive+0x20/0x100 drivers/net/wireguard/send.c:225
wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline]
wg_packet_handshake_receive_worker+0x445/0x5e0 drivers/net/wireguard/receive.c:213
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
worker_thread+0x525/0x730 kernel/workqueue.c:2787
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
value changed: 0xffff888148fef200 -> 0xffff88814cd91280
Mark this race as intentional by using the skb_queue_empty_lockless()
function rather than skb_queue_empty(), which uses READ_ONCE()
internally to annotate the race.
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-5-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KCSAN reports a race in the CPU round robin function, which, as the
comment points out, is intentional:
BUG: KCSAN: data-race in wg_packet_send_staged_packets / wg_packet_send_staged_packets
read to 0xffff88811254eb28 of 4 bytes by task 3160 on cpu 1:
wg_cpumask_next_online drivers/net/wireguard/queueing.h:127 [inline]
wg_queue_enqueue_per_device_and_peer drivers/net/wireguard/queueing.h:173 [inline]
wg_packet_create_data drivers/net/wireguard/send.c:320 [inline]
wg_packet_send_staged_packets+0x60e/0xac0 drivers/net/wireguard/send.c:388
wg_packet_send_keepalive+0xe2/0x100 drivers/net/wireguard/send.c:239
wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline]
wg_packet_handshake_receive_worker+0x449/0x5f0 drivers/net/wireguard/receive.c:213
process_one_work kernel/workqueue.c:3248 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3329
worker_thread+0x526/0x720 kernel/workqueue.c:3409
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
write to 0xffff88811254eb28 of 4 bytes by task 3158 on cpu 0:
wg_cpumask_next_online drivers/net/wireguard/queueing.h:130 [inline]
wg_queue_enqueue_per_device_and_peer drivers/net/wireguard/queueing.h:173 [inline]
wg_packet_create_data drivers/net/wireguard/send.c:320 [inline]
wg_packet_send_staged_packets+0x6e5/0xac0 drivers/net/wireguard/send.c:388
wg_packet_send_keepalive+0xe2/0x100 drivers/net/wireguard/send.c:239
wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline]
wg_packet_handshake_receive_worker+0x449/0x5f0 drivers/net/wireguard/receive.c:213
process_one_work kernel/workqueue.c:3248 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3329
worker_thread+0x526/0x720 kernel/workqueue.c:3409
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
value changed: 0xffffffff -> 0x00000000
Mark this race as intentional by using READ/WRITE_ONCE().
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On the parisc platform, the kernel issues kernel warnings because
swap_endian() tries to load a 128-bit IPv6 address from an unaligned
memory location:
Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df)
Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc)
Avoid such unaligned memory accesses by instead using the
get_unaligned_be64() helper macro.
Signed-off-by: Helge Deller <deller@gmx.de>
[Jason: replace src[8] in original patch with src+8]
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
QEMU 9.0 removed -no-acpi, in favor of machine properties, so update the
Makefile to use the correct QEMU invocation.
Cc: stable@vger.kernel.org
Fixes: b83fdcd9fb8a ("wireguard: selftests: use microvm on x86")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return an error code if bcmasp_interface_create() fails. Don't return
success.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://patch.msgid.link/ZoWKBkHH9D1fqV4r@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
|
|
`gsc_hwmon_regmap_bus` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240705-hwmon-const-regmap-v1-1-7cde543ba818@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When commit 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings
to json-schema") converted the pwm provider section of the text binding
to dt-schema it also updated all references to pwm.txt in pwm provider
bindings to pwm.yaml.
Most pwm provider bindings had a reference to pwm.txt as it contains a
description of what the cells in #pwm-cells are, albeit in the consumer
section of the document. Only information in the provider section of the
document was moved to the yaml binding, and it contains no information
about the cell format, making all references to it for the cell format
unhelpful.
Fixes: 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings to json-schema")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240517-patient-stingily-30611f73e792@spud
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
When the state changes from enabled to disabled, polarity, duty_cycle
and period are not configured in hardware and TIM_CCER_CCxE is just
cleared. However if the state changes from one disabled state to
another, all parameters are written to hardware because the early exit
from stm32_pwm_apply() is only taken if the pwm is currently enabled.
This yields surprises like: Applying
{ .period = 1, .duty_cycle = 0, .enabled = false }
succeeds if the pwm is initially on, but fails if it's already off
because 1 is a too small period.
Update the check for lazy disable to always exit early if the target
state is disabled, no matter what is currently configured.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240703110010.672654-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The Makefile open-codes compiler invocations that ../lib.mk already
provides.
Avoid this by using a Make feature that allows setting per-target
variables, which in this case are: CFLAGS and LDFLAGS. This approach
generates the exact same compiler invocations as before, but removes all
of the code duplication, along with the quirky mangled variable names.
So now the Makefile is smaller, less unusual, and easier to read.
The new dependencies are listed after including lib.mk, in order to
let lib.mk provide the first target ("all:"), and are grouped together
with their respective source file dependencies, for visual clarity.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There were a couple of errors here:
1. TEST_GEN_PROGS was incorrectly prepending $(OUTPUT) to each program
to be built. However, lib.mk already does that because it assumes "bare"
program names are passed in, so this ended up creating
$(OUTPUT)/$(OUTPUT)/file.c, which of course won't work as intended.
2. lib.mk was included before TEST_GEN_PROGS was set, which led to
lib.mk's "all:" target not seeing anything to rebuild.
So nothing worked, which caused the author to force things by creating
an "all:" target locally--while still including ../lib.mk.
Fix all of this by including ../lib.mk at the right place, and removing
the $(OUTPUT) prefix to the programs to be built, and removing the
duplicate "all:" target.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns about mismatches between the expected and required
integer length being supplied to abs(3).
Fix this by using the correct variant of abs(3): labs(3) or llabs(3), in
these cases.
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Make it consistent with apply_wqattrs_commit().
Link: https://lore.kernel.org/lkml/20240203154334.791910-5-longman@redhat.com/
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The PWQ allocation and WQ enlistment are not within the same lock-held
critical section; therefore, their states can become out of sync when
the user modifies the unbound mask or if CPU hotplug events occur in
the interim since those operations only update the WQs that are already
in the list.
Make the PWQ allocation and WQ enlistment atomic.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
kthread_flush_worker() can't be called with wq_pool_mutex held.
Prepare for moving wq_pool_mutex and cpu hotplug lock out of
alloc_and_link_pwqs().
Cc: Zqiang <qiang.zhang1211@gmail.com>
Link: https://lore.kernel.org/lkml/20230920060704.24981-1-qiang.zhang1211@gmail.com/
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
new wq
For early wq allocation, rescuer initialization is the last step of the
creation of a new wq. Make the behavior the same for all allocations.
Prepare for initializing rescuer's affinities with the default pwq's
affinities.
Prepare for moving the whole workqueue initializing procedure into
wq_pool_mutex and cpu hotplug locks.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
workqueue creation includes adding it to the workqueue list.
Prepare for moving the whole workqueue initializing procedure into
wq_pool_mutex and cpu hotplug locks.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull drm fixes from Daniel Vetter:
"Just small fixes all over here, all quiet as it should.
drivers:
- amd: mostly amdgpu display fixes + radeon vm NULL deref fix
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
|
|
In the function cgroup_base_stat_cputime_show, there are five
instances of #ifdef, which makes the code not concise.
To address this, add the function cgroup_force_idle_show
to make the code more succinct.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
|
|
Pull kvm fix from Paolo Bonzini:
- s390: fix support for z16 systems
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: fix LPSWEY handling
|
|
Just cosmetics. No functional change intended.
While at it, removed a couple of redundant else if() statements.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240705-dev-spi-xcomm-gpiochip-v2-4-b10842fc9636@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
