summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-13dt-bindings: clock: Add schema for MSM8909 GCCStephan Gerhold
The Global Clock Controller (GCC) in the MSM8909 SoC provides clocks, resets and power domains for the various hardware blocks in the SoC. Add a DT schema to describe it, similar to other Qualcomm SoCs. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220706134132.3623415-2-stephan.gerhold@kernkonzept.com
2022-09-13clk: qcom: mmcc-msm8960: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-10-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: mmcc-msm8960: move clock parent tables downDmitry Baryshkov
Move clock parent tables down, after the PLL declrataions, so that we can use pll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-9-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: mmcc-msm8960: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-8-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: lcc-msm8960: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-7-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: lcc-msm8960: use macros to implement mi2s clocksDmitry Baryshkov
Split and extend existing CLK_AIF_OSR_DIV macro to implement mi2s clocks. This simplifies the driver and removes extra code duplication. The clock mi2s_div_clk used .enable_reg/.enable_bit, however these fields are not used with by the clk_regmap_div_ops, thus they are silently dropped. Clock enablement is handled in the mi2s_bit_div_clk clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-6-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8960: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-5-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8960: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-4-dmitry.baryshkov@linaro.org
2022-09-13dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8960Dmitry Baryshkov
Define clock/clock-names properties of the MMCC device node to be used on MSM8960/APQ8064 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-3-dmitry.baryshkov@linaro.org
2022-09-13dt-bindings: clocks: qcom,gcc-apq8064: define clocks/-names propertiesDmitry Baryshkov
Define clock/clock-names properties of the GCC device node to be used on MSM8960/APQ8064 platforms. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: David Heidelberg <david@ixit.cz> # tested on Nexus 7 (2013) Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220623120418.250589-2-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: clk-rpmh: Remove redundant if statementLi Zhengyu
By the clk framework already reference counts prepare/unprepare, this if statement should be never true. Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220613063327.89320-1-lizhengyu3@huawei.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2022-09-13clk: qcom: gcc-sdm845: add sdm670 global clock dataRichard Acayan
The Snapdragon 670 adds and removes some clocks, adds new frequencies, and adds a new GPLL (Global Phase-Locked Loop) in reference to SDM845, while also removing some GDSCs. Despite these differences, there are many similarities with SDM670. Add data for SDM670 in the driver for SDM845 to reuse the most of the clock data. Advantages and disadvantages of this approach: + maintenance applies to both sdm670 and sdm845 by default + less duplicate code (clocks) means smaller distro/pre-built kernels with all drivers enabled - clocks for both SoC's must be compiled if the user wants clocks for one specific SoC (both or none) - additional testing needed for sdm845 devices Link: https://android.googlesource.com/kernel/msm/+/443bd8d6e2cf54698234c752e6de97b4b8a528bd%5E%21/#F10 Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914013922.198778-4-mailingradian@gmail.com
2022-09-13clk: qcom: gcc-sdm845: use device tree match dataRichard Acayan
This driver will support more than one SoC's set of clocks, and set of GDSCs. This behavior would be unclean with hard-coded static variables. Support it by grabbing clocks, GDSCs, and BCRs in the match data. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914013922.198778-3-mailingradian@gmail.com
2022-09-13dt-bindings: clock: gcc-sdm845: add sdm670 global clocksRichard Acayan
The Snapdragon 670 clocks will be added into the sdm845 gcc driver. Most of the new clocks, GDSCs, and resets already have reserved IDs but there are some resources that don't. Add the new clock from Snapdragon 670 and document the differences between the SoC parent clocks. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914013922.198778-2-mailingradian@gmail.com
2022-09-13clk: qcom: a53-pll: convert to use parent_data rather than parent_namesDmitry Baryshkov
Change a53-pll driver to use clk_parent_data rather than always looking up the xo clock in the system clock list. Note, this change also switches the a53-pll from the global `xo' clock to the `xo_board', the clock that is specified as the `xo' clock in the DT file. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909103137.3727830-1-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8660: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909105136.3733919-4-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: gcc-msm8660: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909105136.3733919-3-dmitry.baryshkov@linaro.org
2022-09-13dt-bindings: clock: qcom,gcc-msm8660: separate GCC bindings for MSM8660Dmitry Baryshkov
Create a separate DT bindings for Global Clock Controller on MSM8660 platform. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909105136.3733919-2-dmitry.baryshkov@linaro.org
2022-09-13clk: qcom: sm6115: Select QCOM_GDSCDang Huynh
While working on the Fxtec Pro1X device, this error shows up with my own minimal configuration: gcc-sm6115: probe of 1400000.clock-controller failed with error -38 The clock driver depends on CONFIG_QCOM_GDSC and after enabling that, the driver probes successfully. Signed-off-by: Dang Huynh <danct12@riseup.net> Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220910170207.1592220-1-danct12@riseup.net
2022-09-13clk: qcom: lpass: Add support for resets & external mclk for SC7280Taniya Das
The clock gating control for TX/RX/WSA core bus clocks would be required to be reset(moved from hardware control) from audio core driver. Thus add the support for the reset clocks. Update the lpass_aon_cc_main_rcg_clk_src ops to park the RCG at XO after disable as this clock signal is used by hardware to turn ON memories in LPASS. Also add the external mclk to interface external MI2S. Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-6-git-send-email-quic_c_skakit@quicinc.com
2022-09-13clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aonTaniya Das
Move registration of lpass_q6ss_ahbm_clk and lpass_q6ss_ahbs_clk to lpass_aon_cc_sc7280_probe and register them only if "qcom,adsp-pil-mode" is enabled in the lpass_aon DT node. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-3-git-send-email-quic_c_skakit@quicinc.com
2022-09-13Merge branch '1662005846-4838-1-git-send-email-quic_c_skakit@quicinc.com' ↵Bjorn Andersson
into clk-for-6.1
2022-09-13dt-bindings: clock: Add support for external MCLKs for LPASS on SC7280Taniya Das
Support external mclk to interface external MI2S clocks for SC7280. Fixes: 4185b27b3bef ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-5-git-send-email-quic_c_skakit@quicinc.com
2022-09-13dt-bindings: clock: Add resets for LPASS audio clock controller for SC7280Taniya Das
Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks for SC7280. Update reg property min/max items in YAML schema. Fixes: 4185b27b3bef ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-4-git-send-email-quic_c_skakit@quicinc.com
2022-09-13dt-bindings: clock: Add "qcom,adsp-pil-mode" propertyTaniya Das
When this property is set, the remoteproc is used to boot the LPASS and therefore lpass_q6ss_ahbm_clk and lpass_q6ss_ahbs_clk clocks would be used to bring LPASS out of reset and the rest of the lpass clocks would be controlled directly by the remoteproc. This is a cleanup done to handle overlap of regmap of lpasscc and lpass_aon blocks. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1662005846-4838-2-git-send-email-quic_c_skakit@quicinc.com
2022-09-13clk: rockchip: Add MUXTBL variantElaine Zhang
Add a clock branch consisting of a mux with non-standard select values. The parent in Mux table is sorted by priority. Use clk_register_mux_table() to register such a mux-clock. Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220907160207.3845791-3-jagan@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-08clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helperYang Yingliang
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220827094151.3323450-3-yangyingliang@huawei.com
2022-09-08clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helperYang Yingliang
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220827094151.3323450-2-yangyingliang@huawei.com
2022-09-08clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helperYang Yingliang
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220827094151.3323450-1-yangyingliang@huawei.com
2022-09-02clk: imx8mp: tune the order of enet_qos_root_clkPeng Fan
The enet_qos_root_clk takes sim_enet_root_clk as parent. When registering enet_qos_root_clk, it will be put into clk orphan list, because sim_enet_root_clk is not ready. When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will set enet_qos_root_clk parent to sim_enet_root_clk. Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be enabled and disabled during the enet_qos_root_clk reparent phase. All the above are correct. But with M7 booted early and using enet, M7 enet feature will be broken, because clk driver probe phase disable the needed clks, in case M7 firmware not configure sim_enet_root_clk. And tune the order would also save cpu cycles. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20220815013428.476015-1-peng.fan@oss.nxp.com
2022-09-02dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoCLad Prabhakar
The CPG block on the RZ/Five SoC is almost identical to one found on the RZ/G2UL SoC. "renesas,r9a07g043-cpg" compatible string will be used on the RZ/Five SoC so to make this clear, update the comment to include RZ/Five SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220726174525.620-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-31clk: mediatek: mt8195: Add reset idx for USB/PCIe T-PHYAngeloGioacchino Del Regno
Add the reset idx for the t-phy port 1, used as either USB or PCI-Express (secondary controller) PHY, depending on board-specific configuration/layout. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220720102817.237483-3-angelogioacchino.delregno@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31dt-bindings: reset: mt8195: Add resets for USB/PCIe t-phy port 1AngeloGioacchino Del Regno
Add the reset index for USBSIF P1 (T-PHY port 1), used as either USB or PCI-Express PHY reset. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220720102817.237483-2-angelogioacchino.delregno@collabora.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31clk: mediatek: mt8195-infra_ao: Set pwrmcu clocks as criticalAngeloGioacchino Del Regno
The pwrmcu is responsible for power management and idle states in SSPM: on older SoCs this was managed in Linux drivers like sspm/mcupm/eemgpu but, at least on MT8195, this functionality was transferred to the ATF firmware. For this reason, turning off the pwrmcu related clocks from the kernel will lead to unability to resume the platform after suspend and other currently unknown PM related side-effects. Set the PWRMCU and PWRMCU_BUS_H clocks as critical to prevent the kernel from turning them off, fixing the aforementioned issue. Fixes: e2edf59dec0b ("clk: mediatek: Add MT8195 infrastructure clock support") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220719093316.37253-1-angelogioacchino.delregno@collabora.com Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31clk: mediatek: mt8195: Add reset idx for PCIe0 and PCIe1AngeloGioacchino Del Regno
Add the reset idx for PCIe P0, P1, located in infra_ao RST2 registers. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220629105205.173471-3-angelogioacchino.delregno@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31dt-bindings: reset: mt8195: Add resets for PCIE controllersAngeloGioacchino Del Regno
Add the reset index for PCIe P0 and P1 (PCIe0, PCIe1) on MT8195. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220629105205.173471-2-angelogioacchino.delregno@collabora.com Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646xLukas Bulwahn
Commit 7dd33764486d ("ARM: davinci: Delete DM644x board files") and commit b4aed01de486 ("ARM: davinci: Delete DM646x board files") removes the support for DaVinci DM644x and DM646x boards. Hence, remove the PLL and PSC clock descriptions for those boards as well. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220720082934.17741-1-lukas.bulwahn@gmail.com Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31clk: mediatek: clk-mt8195-vdo1: Reparent and set rate on vdo1_dpintf's parentAngeloGioacchino Del Regno
Like it was done for the vdo0_dp_intf0_dp_intf clock (used for eDP), add the CLK_SET_RATE_PARENT flag to CLK_VDO1_DPINTF (used for DP) and also fix its parent clock name as it has to be "top_dp" for two reasons: - This is its real parent! - Likewise to eDP/VDO0 counterpart, we need clock source selection on CLK_TOP_DP. Fixes: 269987505ba9 ("clk: mediatek: Add MT8195 vdosys1 clock support") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220816193257.658487-3-nfraprado@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31clk: mediatek: clk-mt8195-vdo0: Set rate on vdo0_dp_intf0_dp_intf's parentAngeloGioacchino Del Regno
Add the CLK_SET_RATE_PARENT flag to the CLK_VDO0_DP_INTF0_DP_INTF clock: this is required to trigger clock source selection on CLK_TOP_EDP, while avoiding to manage the enablement of the former separately from the latter in the displayport driver. Fixes: 70282c90d4a2 ("clk: mediatek: Add MT8195 vdosys0 clock support") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220816193257.658487-2-nfraprado@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-30dt-bindings: clock: drop minItems equal to maxItemsKrzysztof Kozlowski
minItems, if missing, are implicitly equal to maxItems, so drop redundant piece to reduce size of code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220825113334.196908-3-krzysztof.kozlowski@linaro.org Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-30clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rateQuanyang Wang
The function zynqmp_pll_round_rate is used to find a most appropriate PLL frequency which the hardware can generate according to the desired frequency. For example, if the desired frequency is 297MHz, considering the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz) of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5). There are two problems with the current code of zynqmp_pll_round_rate: 1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate when the parameter "rate" is an integer multiple of *prate, in other words, if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and just return 660MHz, and this will cause clk_calc_new_rates failure since zynqmp_pll_round_rate returns an invalid rate out of its boundaries. 2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk that zynqmp_pll_round_rate returns an invalid rate because the function DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz, this function will return 1499999985Hz by using the formula below: value = *prate * DIV_ROUND_CLOSEST(rate, *prate)). This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN. because DIV_ROUND_CLOSEST makes some loss in the fractional part. Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.com Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-30Merge tag 'samsung-clk-6.1' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung Pull Samsung clk driverd updates from Krzysztof Kozlowski: - Exynos7885: add FSYS, TREX and MFC clock controllers. - Exynos850: add IS and AUD (audio) clock controllers with bindings. - ExynosAutov9: add FSYS clock controllers with bindings. - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers. - ExynosAutov9: add few missing Peric 0/1 gates. - ExynosAutov9: correct register offsets of few Peric 0/1 clocks. - Minor code improvements (use of_device_get_match_data() helper, code style). - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform. * tag 'samsung-clk-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: MAINTAINERS: add Krzysztof Kozlowski clk: samsung: exynos850: Implement CMU_MFCMSCL domain clk: samsung: exynos850: Implement CMU_IS domain clk: samsung: exynos850: Implement CMU_AUD domain clk: samsung: exynos850: Style fixes clk: samsung: exynosautov9: add fsys1 clock support clk: samsung: exynosautov9: add fsys0 clock support clk: samsung: exynosautov9: correct register offsets of peric0/c1 clk: samsung: exynosautov9: add missing gate clks for peric0/c1 dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL dt-bindings: clock: exynos850: Add Exynos850 CMU_IS dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1 dt-bindings: clock: exynosautov9: add fsys1 clock definitions dt-bindings: clock: exynosautov9: add fys0 clock definitions clk: samsung: exynos7885: Add TREX clocks clk: samsung: exynos7885: Implement CMU_FSYS domain dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1 clk: samsung: exynos-clkout: Use of_device_get_match_data()
2022-08-29clk: qcom: gcc-sdm660: Use floor ops for SDCC1 clockMarijn Suijten
In commit 3f905469c8ce ("clk: qcom: gcc: Use floor ops for SDCC clocks") floor ops were applied to SDCC2 only, but flooring is also required on the SDCC1 apps clock which is used by the eMMC card on Sony's Nile platform, and otherwise result in the typicial "Card appears overclocked" warnings observed on many other platforms before: mmc0: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc0: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc0: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220714203822.186448-1-marijn.suijten@somainline.org
2022-08-29dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8996Dmitry Baryshkov
Define clock/clock-names properties of the MMCC device node to be used on MSM8996 platform. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220705112734.1323355-3-dmitry.baryshkov@linaro.org
2022-08-29dt-bindings: clock: qcom,mmcc: fix clocks/clock-names definitionsDmitry Baryshkov
Rather than defining (incorrect) global clocks and clock-names lists, define them per platform using conditionals. Also, while we are at it, mark these properties as required for all platforms for which DT files contained clocks/clock-names for the MMCC nodes from the beginning (in addition to existing MSM8998 this adds MSM8994, SDM630 and SDM660). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220705112734.1323355-2-dmitry.baryshkov@linaro.org
2022-08-29clk: qcom: gcc-msm8916: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220704172453.838303-7-dmitry.baryshkov@linaro.org
2022-08-29clk: qcom: gcc-msm8916: move gcc_mss_q6_bimc_axi_clk downDmitry Baryshkov
The gcc_mss_q6_bimc_axi_clk clock depends on the bimc_ddr_clk_src clock. Move it down in the file to come after the source clock. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220704172453.838303-6-dmitry.baryshkov@linaro.org
2022-08-29clk: qcom: gcc-msm8916: move GPLL definitions upDmitry Baryshkov
Move GPLL definitions up, before the clock parent tables, so that we can use gpll hw clock fields in the parent_data/parent_hws tables. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220704172453.838303-5-dmitry.baryshkov@linaro.org
2022-08-29clk: qcom: gcc-msm8916: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. This conversion fixes an issue present since the first version of this driver. For the gp1_clk_src, gp2_clk_src and gp3_clk_src it was impossible to select sleep_clk as a prent of the clock, since num_parents was limited to 3 rather than 4. Switching to use num_parents automatically makes sleep_clk available for selection. Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support") Cc: Georgi Djakov <djakov@kernel.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220704172453.838303-4-dmitry.baryshkov@linaro.org
2022-08-29dt-bindings: clock: separate bindings for MSM8916 GCC deviceDmitry Baryshkov
Separate bindings for GCC on Qualcomm MSM8916 platforms. This adds new clocks/clock-names properties to be used for clock links. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220704172453.838303-3-dmitry.baryshkov@linaro.org
generated by cgit (git 2.34.1) at 2025-09-12 07:14:52 +0000