| Age | Commit message (Collapse) | Author |
|---|
|
Define AXI_GATING_VALID_OVERRIDE and fixup comments to improve readability
of Q6 modem reset sequence on SC7180 SoCs.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200123131236.1078-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Replace the loop for HALT_ACK detection with regmap_read_poll_timeout.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200123131236.1078-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
strnlen_user()
The range passed to user_access_begin() by strncpy_from_user() and
strnlen_user() starts at 'src' and goes up to the limit of userspace
although reads will be limited by the 'count' param.
On 32 bits powerpc (book3s/32) access has to be granted for each
256Mbytes segment and the cost increases with the number of segments to
unlock.
Limit the range with 'count' param.
Fixes: 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The netlink notifications triggered by the INIT and INIT_ACK chunks
for a tracked SCTP association do not include protocol information
for the corresponding connection - SCTP state and verification tags
for the original and reply direction are missing. Since the connection
tracking implementation allows user space programs to receive
notifications about a connection and then create a new connection
based on the values received in a notification, it makes sense that
INIT and INIT_ACK notifications should contain the SCTP state
and verification tags available at the time when a notification
is sent. The missing verification tags cause a newly created
netfilter connection to fail to verify the tags of SCTP packets
when this connection has been created from the values previously
received in an INIT or INIT_ACK notification.
A PROTOINFO event is cached in sctp_packet() when the state
of a connection changes. The CLOSED and COOKIE_WAIT state will
be used for connections that have seen an INIT and INIT_ACK chunk,
respectively. The distinct states will cause a connection state
change in sctp_packet().
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The ACPI Device Specific Methods (_DSM) paragraph is intended to be a
subsection of the Submit Checklist Addendum section. Dan Williams however
used Markdown notation for this subsection, which does not parse as
intended in a ReST documentation.
Change the markup to ReST notation, as described in the Specific
guidelines for the kernel documentation section in
Documentation/doc-guide/sphinx.rst.
Fixes: 47843401e3a0 ("libnvdimm, MAINTAINERS: Maintainer Entry Profile")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200118153620.8276-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Clang warns:
../sound/soc/codecs/rt1015.c:392:14: warning: duplicate 'const'
declaration specifier [-Wduplicate-decl-specifier]
static const SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0,
^
../include/sound/soc.h:355:2: note: expanded from macro
'SOC_ENUM_SINGLE_DECL'
SOC_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xtexts)
^
../include/sound/soc.h:352:2: note: expanded from macro
'SOC_ENUM_DOUBLE_DECL'
const struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
^
1 warning generated.
Remove the const after static to fix it.
Fixes: df31007400c3 ("ASoC: rt1015: add rt1015 amplifier driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/845
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200124155750.33753-1-natechancellor@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 08df0d9a00f7 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep
warning"") provided a good rationale for removing separate lock for the
SHDN register access. However it restored the lockdep warning during the
system boot. To silence the lockdep warning, mark the mutex taken in the
max98090_shdn_save() function with the lockdep class dedicated for the
runtime DAPM operations: SND_SOC_DAPM_CLASS_RUNTIME. This finally fixes
the following lockdep warning observed on Exynos4412-based Odroid U3
board:
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc7-next-20200123 #7329 Not tainted
------------------------------------------------------
alsactl/1105 is trying to acquire lock:
ed4f7cf4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28
but task is already holding lock:
edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&card->controls_rwsem){++++}:
snd_ctl_add_replace+0x3c/0x84
dapm_create_or_share_kcontrol+0x24c/0x2e0
snd_soc_dapm_new_widgets+0x308/0x594
snd_soc_bind_card+0x834/0xa94
devm_snd_soc_register_card+0x34/0x6c
odroid_audio_probe+0x288/0x34c
platform_drv_probe+0x6c/0xa4
really_probe+0x200/0x48c
driver_probe_device+0x78/0x1f8
bus_for_each_drv+0x74/0xb8
__device_attach+0xd4/0x16c
bus_probe_device+0x88/0x90
deferred_probe_work_func+0x3c/0xd0
process_one_work+0x230/0x7bc
worker_thread+0x44/0x524
kthread+0x130/0x164
ret_from_fork+0x14/0x20
0x0
-> #0 (&card->dapm_mutex){+.+.}:
lock_acquire+0xe8/0x270
__mutex_lock+0x9c/0xb18
mutex_lock_nested+0x1c/0x24
max98090_shdn_save+0x1c/0x28
max98090_put_enum_double+0x20/0x40
snd_ctl_ioctl+0x190/0xbb8
ksys_ioctl+0x484/0xb10
ret_fast_syscall+0x0/0x28
0xbede0564
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
*** DEADLOCK ***
1 lock held by alsactl/1105:
#0: edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
stack backtrace:
CPU: 2 PID: 1105 Comm: alsactl Not tainted 5.5.0-rc7-next-20200123 #7329
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c01126f0>] (unwind_backtrace) from [<c010e1e8>] (show_stack+0x10/0x14)
[<c010e1e8>] (show_stack) from [<c0b5234c>] (dump_stack+0xb4/0xe0)
[<c0b5234c>] (dump_stack) from [<c018a610>] (check_noncircular+0x1ec/0x208)
[<c018a610>] (check_noncircular) from [<c018ca2c>] (__lock_acquire+0x1210/0x25ec)
[<c018ca2c>] (__lock_acquire) from [<c018e728>] (lock_acquire+0xe8/0x270)
[<c018e728>] (lock_acquire) from [<c0b71928>] (__mutex_lock+0x9c/0xb18)
[<c0b71928>] (__mutex_lock) from [<c0b723c0>] (mutex_lock_nested+0x1c/0x24)
[<c0b723c0>] (mutex_lock_nested) from [<c086097c>] (max98090_shdn_save+0x1c/0x28)
[<c086097c>] (max98090_shdn_save) from [<c08613f8>] (max98090_put_enum_double+0x20/0x40)
[<c08613f8>] (max98090_put_enum_double) from [<c0833f20>] (snd_ctl_ioctl+0x190/0xbb8)
[<c0833f20>] (snd_ctl_ioctl) from [<c02cae14>] (ksys_ioctl+0x484/0xb10)
[<c02cae14>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed331fa8 to 0xed331ff0)
...
Fixes: 08df0d9a00f7 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep warning"")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200123134046.9769-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sysfs node for huge page writeback is writeback rather than write.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/20200120102949.12132-1-zbestahu@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix various items in zram.rst:
- typos/spellos
- punctuation
- grammar
- shell syntax
- indentation
- sysfs file names
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Link: https://lore.kernel.org/r/77000e12-677a-62f6-9f78-343be5bd6630@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Documentation should lead by example, so here's a basic maintainer entry
profile for this subsystem.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This is mostly a collection of thoughts for how people who want to help out
can make the docs better. Hopefully the world will respond with a flurry
of useful patches.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Sphinx 2.1 moved sphinx.environment.NoUri into sphinx.errors; that produced
this warning in the docs build:
/usr/lib/python3.7/site-packages/sphinx/registry.py:473:
RemovedInSphinx30Warning: sphinx.environment.NoUri is deprecated.
Grab NoUri from the right place and make the warning go away. That symbol
was only added to sphinx.errors in 2.1, so we must still import it from the
old location when running in older versions.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now overlayfs falls back to use default file splice read
and write, which is not compatiple with overlayfs, returning
EFAULT. xfstests generic/591 can reproduce part of this.
Tested this patch with xfstests auto group tests.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
into next
|
|
The assignment of the global variable 'iommu_detected' has been
moved from amd_iommu_init_dma_ops() to amd_iommu_detect(), so
this patch removes the assignment in amd_iommu_init_dma_ops().
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Address field in device TLB invalidation descriptor is qualified
by the S field. If S field is zero, a single page at page address
specified by address [63:12] is requested to be invalidated. If S
field is set, the least significant bit in the address field with
value 0b (say bit N) indicates the invalidation address range. The
spec doesn't require the address [N - 1, 0] to be cleared, hence
remove the unnecessary WARN_ON_ONCE().
Otherwise, the caller might set "mask = MAX_AGAW_PFN_WIDTH" in order
to invalidating all the cached mappings on an endpoint, and below
overflow error will be triggered.
[...]
UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1354:3
shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
Reported-and-tested-by: Frank <fgndev@posteo.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The iommu default domain framework has been designed to take
care of setting identity default domain type. It's unnecessary
to handle this again in the VT-d driver. Hence, remove it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since commit ea2447f700cab ("intel-iommu: Prevent devices with
RMRRs from being placed into SI Domain"), the Intel IOMMU driver
doesn't allow any devices with RMRR locked to use the identity
domain. This was added to to fix the issue where the RMRR info
for devices being placed in and out of the identity domain gets
lost. This identity maps all RMRRs when setting up the identity
domain, so that devices with RMRRs could also use it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The VT-d spec specifies requirements for the RMRR entries base and
end (called 'Limit' in the docs) addresses.
This commit will cause the DMAR processing to mark the firmware as
tainted if any RMRR entries that do not meet these requirements.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
RMRR entries describe memory regions that are DMA targets for devices
outside the kernel's control.
RMRR entries that fail the sanity check are pointing to regions of
memory that the firmware did not tell the kernel are reserved or
otherwise should not be used.
Instead of aborting DMAR processing, this commit marks the firmware
as tainted. These RMRRs will still be identity mapped, otherwise,
some devices, e.x. graphic devices, will not work during boot.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: f036c7fa0ab60 ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
init_iommu_perf_ctr() clobbers the register when it checks write access
to IOMMU perf counters and fails to restore when they are writable.
Add save and restore to fix it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 30861ddc9cca4 ("perf/x86/amd: Add IOMMU Performance Counter resource management")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It is possible for archdata.iommu to be set to
DEFER_DEVICE_DOMAIN_INFO or DUMMY_DEVICE_DOMAIN_INFO so check for
those values before calling __dmar_remove_one_dev_info. Without a
check it can result in a null pointer dereference. This has been seen
while booting a kdump kernel on an HP dl380 gen9.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org # 5.3+
Cc: linux-kernel@vger.kernel.org
Fixes: ae23bfb68f28 ("iommu/vt-d: Detach domain before using a private one")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
[BUG]
For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071,
looped runs can lead to random failure, where scrub finds csum error.
The possibility is not high, around 1/20 to 1/100, but it's causing data
corruption.
The bug is observable after commit b12de52896c0 ("btrfs: scrub: Don't
check free space before marking a block group RO")
[CAUSE]
Dev-replace has two source of writes:
- Write duplication
All writes to source device will also be duplicated to target device.
Content: Not yet persisted data/meta
- Scrub copy
Dev-replace reused scrub code to iterate through existing extents, and
copy the verified data to target device.
Content: Previously persisted data and metadata
The difference in contents makes the following race possible:
Regular Writer | Dev-replace
-----------------------------------------------------------------
^ |
| Preallocate one data extent |
| at bytenr X, len 1M |
v |
^ Commit transaction |
| Now extent [X, X+1M) is in |
v commit root |
================== Dev replace starts =========================
| ^
| | Scrub extent [X, X+1M)
| | Read [X, X+1M)
| | (The content are mostly garbage
| | since it's preallocated)
^ | v
| Write back happens for |
| extent [X, X+512K) |
| New data writes to both |
| source and target dev. |
v |
| ^
| | Scrub writes back extent [X, X+1M)
| | to target device.
| | This will over write the new data in
| | [X, X+512K)
| v
This race can only happen for nocow writes. Thus metadata and data cow
writes are safe, as COW will never overwrite extents of previous
transaction (in commit root).
This behavior can be confirmed by disabling all fallocate related calls
in fsstress (*), then all related tests can pass a 2000 run loop.
*: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \
-f collapse=0 -f punch=0 -f resvsp=0"
I didn't expect resvsp ioctl will fallback to fallocate in VFS...
[FIX]
Make dev-replace to require mandatory block group RO, and wait for current
nocow writes before calling scrub_chunk().
This patch will mostly revert commit 76a8efa171bf ("btrfs: Continue replace
when set_block_ro failed") for dev-replace path.
The side effect is, dev-replace can be more strict on avaialble space, but
definitely worth to avoid data corruption.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed")
Fixes: b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If a device is deleted by one of its system-wide resume callbacks
(for example, because it does not appear to be present or accessible
any more) along with its children, the resume of the children may
continue leading to use-after-free errors and other issues
(potentially).
Namely, if the device's children are resumed asynchronously, their
resume may have been scheduled already before the device's callback
runs and so the device may be deleted while dpm_wait_for_superior()
is being executed for them. The memory taken up by the parent device
object may be freed then while dpm_wait() is waiting for the parent's
resume callback to complete, which leads to a use-after-free.
Moreover, the resume of the children is really not expected to
continue after they have been unregistered, so it must be terminated
right away in that case.
To address this problem, modify dpm_wait_for_superior() to check
if the target device is still there in the system-wide PM list of
devices and if so, to increment its parent's reference counter, both
under dpm_list_mtx which prevents device_del() running for the child
from dropping the parent's reference counter prematurely.
If the device is not present in the system-wide PM list of devices
any more, the resume of it cannot continue, so check that again after
dpm_wait() returns, which means that the parent's callback has been
completed, and pass the result of that check to the caller of
dpm_wait_for_superior() to allow it to abort the device's resume
if it is not there any more.
Link: https://lore.kernel.org/linux-pm/1579568452-27253-1-git-send-email-chanho.min@lge.com
Reported-by: Chanho Min <chanho.min@lge.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Christoph Paasch says:
====================
Multipath TCP part 2: Single subflow & RFC8684 support
v2 -> v3: Added RFC8684-style handshake (see below fore more details) and some minor fixes
v1 -> v2: Rebased on latest "Multipath TCP: Prerequisites" v3 series
This set adds MPTCP connection establishment, writing & reading MPTCP
options on data packets, a sysctl to allow MPTCP per-namespace, and self
tests. This is sufficient to establish and maintain a connection with a
MPTCP peer, but will not yet allow or initiate establishment of
additional MPTCP subflows.
We also add the necessary code for the RFC8684-style handshake.
RFC8684 obsoletes the experimental RFC6824 and makes MPTCP move-on to
version 1.
Originally our plan was to submit single-subflow and RFC8684 support in
two patchsets, but to simplify the merging-process and ensure that a coherent
MPTCP-version lands in Linux we decided to merge the two sets into a single
one.
The MPTCP patchset exclusively supports RFC 8684. Although all MPTCP
deployments are currently based on RFC 6824, future deployments will be
migrating to MPTCP version 1. 3GPP's 5G standardization also solely supports
RFC 8684. In addition, we believe that this initial submission of MPTCP will be
cleaner by solely supporting RFC 8684. If later on support for the old
MPTCP-version is required it can always be added in the future.
The major difference between RFC 8684 and RFC 6824 is that it has a better
support for servers using TCP SYN-cookies by reliably retransmitting the
MP_CAPABLE option.
Before ending this cover letter with some refs, it is worth mentioning
that we promise David Miller that merging this series will be rewarded by
Twitter dopamine hits :-D
Clone/fetch:
https://github.com/multipath-tcp/mptcp_net-next.git (tag: netdev-v3-part2)
Browse:
https://github.com/multipath-tcp/mptcp_net-next/tree/netdev-v3-part2
Thank you for your review. You can find us at mptcp@lists.01.org and
https://is.gd/mptcp_upstream
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With MPTCP v1, passive connections can fallback to TCP after the
subflow becomes established:
syn + MP_CAPABLE ->
<- syn, ack + MP_CAPABLE
ack, seq = 3 ->
// OoO packet is accepted because in-sequence
// passive socket is created, is in ESTABLISHED
// status and tentatively as MP_CAPABLE
ack, seq = 2 ->
// no MP_CAPABLE opt, subflow should fallback to TCP
We can't use the 'subflow' socket fallback, as we don't have
it available for passive connection.
Instead, when the fallback is detected, replace the mptcp
socket with the underlying TCP subflow. Beyond covering
the above scenario, it makes a TCP fallback socket as efficient
as plain TCP ones.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements the handling of MP_CAPABLE + data option, as per
RFC 6824 bis / RFC 8684: MPTCP v1.
On the server side we can receive the remote key after that the connection
is established. We need to explicitly track the 'missing remote key'
status and avoid emitting a mptcp ack until we get such info.
When a late/retransmitted/OoO pkt carrying MP_CAPABLE[+data] option
is received, we have to propagate the mptcp seq number info to
the msk socket. To avoid ABBA locking issue, explicitly check for
that in recvmsg(), where we own msk and subflow sock locks.
The above also means that an established mp_capable subflow - still
waiting for the remote key - can be 'downgraded' to plain TCP.
Such change could potentially block a reader waiting for new data
forever - as they hook to msk, while later wake-up after the downgrade
will be on subflow only.
The above issue is not handled here, we likely have to get rid of
msk->fallback to handle that cleanly.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements MP_CAPABLE options parsing and writing according
to RFC 6824 bis / RFC 8684: MPTCP v1.
Local key is sent on syn/ack, and both keys are sent on 3rd ack.
MP_CAPABLE messages len are updated accordingly. We need the skbuff to
correctly emit the above, so we push the skbuff struct as an argument
all the way from tcp code to the relevant mptcp callbacks.
When processing incoming MP_CAPABLE + data, build a full blown DSS-like
map info, to simplify later processing. On child socket creation, we
need to record the remote key, if available.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For simplicity's sake use directly sha256 primitives (and pull them
as a required build dep).
Add optional, boot-time self-tests for the hmac function.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.
The "-c" command line option for mptcp_connect.sh is there for debugging:
The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.
The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.
Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.
The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io. Default is non-blocking
io using read/write/poll.
Will run automatically on "make kselftest".
Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.
A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:
https://patchwork.kernel.org/patch/11204935/
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
New MPTCP sockets will return -ENOPROTOOPT if MPTCP support is disabled
for the current net namespace.
We are providing here a way to control access to the feature for those
that need to turn it on or off.
The value of this new sysctl can be different per namespace. We can then
restrict the usage of MPTCP to the selected NS. In case of serious
issues with MPTCP, administrators can now easily turn MPTCP off.
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the current sendmsg() lands on the same subflow we used last, we
can try to collapse the data.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the previous patch in place, the msk can detect which subflow
has the current map with a simple walk, let's update the main
loop to always select the 'current' subflow. The exit conditions now
closely mirror tcp_recvmsg() to get expected timeout and signal
behavior.
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new SEND_SPACE flag to indicate that a subflow has enough space to
accept more data for transmission.
It gets cleared at the end of mptcp_sendmsg() in case ssk has run
below the free watermark.
It is (re-set) from the wspace callback.
This allows us to use msk->flags to determine the poll mask.
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Parses incoming DSS options and populates outgoing MPTCP ACK
fields. MPTCP fields are parsed from the TCP option header and placed in
an skb extension, allowing the upper MPTCP layer to access MPTCP
options after the skb has gone through the TCP stack.
The subflow implements its own data_ready() ops, which ensures that the
pending data is in sequence - according to MPTCP seq number - dropping
out-of-seq skbs. The DATA_READY bit flag is set if this is the case.
This allows the MPTCP socket layer to determine if more data is
available without having to consult the individual subflows.
It additionally validates the current mapping and propagates EoF events
to the connection socket.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Per-packet metadata required to write the MPTCP DSS option is written to
the skb_ext area. One write to the socket may contain more than one
packet of data, which is copied to page fragments and mapped in to MPTCP
DSS segments with size determined by the available page fragments and
the maximum mapping length allowed by the MPTCP specification. If
do_tcp_sendpages() splits a DSS segment in to multiple skbs, that's ok -
the later skbs can either have duplicated DSS mapping information or
none at all, and the receiver can handle that.
The current implementation uses the subflow frag cache and tcp
sendpages to avoid excessive code duplication. More work is required to
ensure that it works correctly under memory pressure and to support
MPTCP-level retransmissions.
The MPTCP DSS checksum is not yet implemented.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
set/getsockopt behaviour with multiple subflows is undefined.
Therefore, for now, we return -EOPNOTSUPP unless we're in fallback mode.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call shutdown on all subflows in use on the given socket, or on the
fallback socket.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generate the local keys, IDSN, and token when creating a new socket.
Introduce the token tree to track all tokens in use using a radix tree
with the MPTCP token itself as the index.
Override the rebuild_header callback in inet_connection_sock_af_ops for
creating the local key on a new outgoing connection.
Override the init_req callback of tcp_request_sock_ops for creating the
local key on a new incoming connection.
Will be used to obtain the MPTCP parent socket to handle incoming joins.
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add subflow_request_sock type that extends tcp_request_sock
and add an is_mptcp flag to tcp_request_sock distinguish them.
Override the listen() and accept() methods of the MPTCP
socket proto_ops so they may act on the subflow socket.
Override the conn_request() and syn_recv_sock() handlers
in the inet_connection_sock to handle incoming MPTCP
SYNs and the ACK to the response SYN.
Add handling in tcp_output.c to add MP_CAPABLE to an outgoing
SYN-ACK response for a subflow_request_sock.
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request,
to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to
the final ACK of the three-way handshake.
Use the .sk_rx_dst_set() handler in the subflow proto to capture when the
responding SYN-ACK is received and notify the MPTCP connection layer.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use ULP to associate a subflow_context structure with each TCP subflow
socket. Creating these sockets requires new bind and connect functions
to make sure ULP is set up immediately when the subflow sockets are
created.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add hooks to parse and format the MP_CAPABLE option.
This option is handled according to MPTCP version 0 (RFC6824).
MPTCP version 1 MP_CAPABLE (RFC6824bis/RFC8684) will be added later in
coordination with related code changes.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements the infrastructure for MPTCP sockets.
MPTCP sockets open one in-kernel TCP socket per subflow. These subflow
sockets are only managed by the MPTCP socket that owns them and are not
visible from userspace. This commit allows a userspace program to open
an MPTCP socket with:
sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP);
The resulting socket is simply a wrapper around a single regular TCP
socket, without any of the MPTCP protocol implemented over the wire.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nikolay Aleksandrov says:
====================
net: bridge: add per-vlan state option
This set adds the first per-vlan option - state, which uses the new vlan
infrastructure that was recently added. It gives us forwarding control on
per-vlan basis. The first 3 patches prepare the vlan code to support option
dumping and modification. We still compress vlan ranges which have equal
options, each new option will have to add its own equality check to
br_vlan_opts_eq(). The vlans are created in forwarding state by default to
be backwards compatible and vlan state is considered only when the port
state is forwarding (more info in patch 4).
I'll send the selftest for the vlan state with the iproute2 patch-set.
v2: patch 3: do full (all-vlan) notification only on vlan
create/delete, otherwise use the per-vlan notifications only,
rework how option change ranges are detected, add more verbose error
messages when setting options and add checks if a vlan should be used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The first per-vlan option added is state, it is needed for EVPN and for
per-vlan STP. The state allows to control the forwarding on per-vlan
basis. The vlan state is considered only if the port state is forwarding
in order to avoid conflicts and be consistent. br_allowed_egress is
called only when the state is forwarding, but the ingress case is a bit
more complicated due to the fact that we may have the transition between
port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still
allow the bridge to learn from the packet after vlan filtering and it will
be dropped after that. Also to optimize the pvid state check we keep a
copy in the vlan group to avoid one lookup. The state members are
modified with *_ONCE() to annotate the lockless access.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for option modification of single vlans and
ranges. It allows to only modify options, i.e. skip create/delete by
using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range
option changes we try to pack the notifications as much as possible.
v2: do full port (all vlans) notification only when creating/deleting
vlans for compatibility, rework the range detection when changing
options, add more verbose extack errors and check if a vlan should
be used (br_vlan_should_use checks)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We'll be dumping the options for the whole range if they're equal. The
first range vlan will be used to extract the options. The commit doesn't
change anything yet it just adds the skeleton for the support. The dump
will happen when the first option is added.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we make sure that br_allowed_egress is called only when we have
BR_STATE_FORWARDING state then we can avoid a test later when we add
per-vlan state.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All callers of __mmc_switch() should now be specifying a valid timeout for
the CMD6 command. However, just to be sure, let's print a warning and
default to use the generic_cmd6_time in case the provided timeout_ms
argument is zero.
In this context, let's also simplify some of the corresponding code and
clarify some related comments.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org
|
