summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-16ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirkYOKOTA Hiroshi
This adds some required quirk when uses headset or headphone on Panasonic CF-SZ6. Signed-off-by: YOKOTA Hiroshi <yokota.hgml@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: hda: add mute led support for HP ProBook 455 G5Po-Hsu Lin
Audio mute led does not work on HP ProBook 455 G5, this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it. BugLink: https://bugs.launchpad.net/bugs/1781763 Reported-by: James Buren Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16of: overlay: update phandle cache on overlay apply and removeFrank Rowand
A comment in the review of the patch adding the phandle cache said that the cache would have to be updated when modules are applied and removed. This patch implements the cache updates. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Reported-by: Alan Tull <atull@kernel.org> Suggested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-16drm: re-enable error handlingNicholas Mc Guire
drm_legacy_ctxbitmap_next() returns idr_alloc() which can return -ENOMEM, -EINVAL or -ENOSPC none of which are -1 . but the call sites of drm_legacy_ctxbitmap_next() seem to be assuming that the error case would be -1 (original return of drm_ctxbitmap_next() prior to 2.6.23 was actually -1). Thus reenable error handling by checking for < 0. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr") Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1531571532-22733-1-git-send-email-hofrat@osadl.org
2018-07-16Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15ASTKT Liao
Add ELAN0622 to ACPI mapping table to support Elan touchpad found in Ideapad 330-15AST. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Reported-by: Anant Shende <anantshende@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-16Merge tag 'phy-for-4.18-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.18-rc *) Fix to get xhci working after disable<->enable cycle *) Fix wrong enum used for status lines (also fixes a compilation warning). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-16mmc: mxcmmc: Fix missing parentheses and braceKees Cook
Looks like the adjusted syntax wasn't fully build tested. This fixes failures with powerpc builds: drivers/mmc/host/mxcmmc.c: In function ‘mxcmci_swap_buffers’: drivers/mmc/host/mxcmmc.c:296:51: error: expected ‘)’ before ‘;’ token void *buf = kmap_atomic(sg_page(sg) + sg->offset; ^ drivers/mmc/host/mxcmmc.c:299:1: error: expected ‘,’ or ‘;’ before ‘}’ token } ^ Fixes: b189e7589f6d3 ("mmc: mxcmmc: handle highmem pages") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-16staging: speakup: fix wraparound in uaccess length checkSamuel Thibault
If softsynthx_read() is called with `count < 3`, `count - 3` wraps, causing the loop to copy as much data as available to the provided buffer. If softsynthx_read() is invoked through sys_splice(), this causes an unbounded kernel write; but even when userspace just reads from it normally, a small size could cause userspace crashes. Fixes: 425e586cf95b ("speakup: add unicode variant of /dev/softsynth") Cc: stable@vger.kernel.org Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16staging: ks7010: call 'hostif_mib_set_request_int' instead of ↵Sergio Paracuellos
'hostif_mib_set_request_bool' 'hostif_mib_set_request_bool' function receives a bool as value and send the received value with MIB_VALUE_TYPE_BOOL type. There is one case where the value passed is not a boolean one but 'MCAST_FILTER_PROMISC' which is '2'. Call hostif_mib_set_request_int instead for related multicast enumeration. This changes original code behaviour but seems to be the right way to do this. Fixes: 8ce76bff0e6a ("staging: ks7010: add new helpers to achieve mib set request and simplify code") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Revert "staging:r8188eu: Use lib80211 to support TKIP"Hans de Goede
Commit b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP") is causing 2 problems for me: 1) One boot the wifi on a laptop with a r8188eu wifi device would not connect and dmesg contained an oops about scheduling while atomic pointing to the tkip code. This went away after reverting the commit. 2) I reverted the revert to try and get the oops from 1. again to be able to add it to this commit message. But now the system did connect to the wifi only to print a whole bunch of oopses, followed by a hardfreeze a few seconds later. Subsequent reboots also all lead to scenario 2. Until I reverted the commit again. Revert the commit fixes both issues making the laptop usable again. Fixes: b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16drm/nouveau: Set DRIVER_ATOMIC cap earlier to fix debugfsLyude Paul
Currently nouveau doesn't actually expose the state debugfs file that's usually provided for any modesetting driver that supports atomic, even if nouveau is loaded with atomic=1. This is due to the fact that the standard debugfs files that DRM creates for atomic drivers is called when drm_get_pci_dev() is called from nouveau_drm.c. This happens well before we've initialized the display core, which is currently responsible for setting the DRIVER_ATOMIC cap. So, move the atomic option into nouveau_drm.c and just add the DRIVER_ATOMIC cap whenever it's enabled on the kernel commandline. This shouldn't cause any actual issues, as the atomic ioctl will still fail as expected even if the display core doesn't disable it until later in the init sequence. This also provides the added benefit of being able to use the state debugfs file to check the current display state even if clients aren't allowed to modify it through anything other than the legacy ioctls. Additionally, disable the DRIVER_ATOMIC cap in nv04's display core, as this was already disabled there previously. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau: Remove bogus crtc check in pmops_runtime_idleLyude Paul
This both uses the legacy modesetting structures in a racy manner, and additionally also doesn't even check the right variable (enabled != the CRTC is actually turned on for atomic). This fixes issues on my P50 regarding the dedicated GPU not entering runtime suspend. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau/drm/nouveau: Fix runtime PM leak in nv50_disp_atomic_commit()Lyude Paul
A CRTC being enabled doesn't mean it's on! It doesn't even necessarily mean it's being used. This fixes runtime PM leaks on the P50 I've got next to me. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau: Avoid looping through fake MST connectorsLyude Paul
When MST and atomic were introduced to nouveau, another structure that could contain a drm_connector embedded within it was introduced; struct nv50_mstc. This meant that we no longer would be able to simply loop through our connector list and assume that nouveau_connector() would return a proper pointer for each connector, since the assertion that all connectors coming from nouveau have a full nouveau_connector struct became invalid. Unfortunately, none of the actual code that looped through connectors ever got updated, which means that we've been causing invalid memory accesses for quite a while now. An example that was caught by KASAN: [ 201.038698] ================================================================== [ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718 [ 201.038800] [ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1 [ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau] [ 201.038887] Call Trace: [ 201.038894] dump_stack+0xa4/0xfd [ 201.038900] print_address_description+0x71/0x239 [ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038935] kasan_report.cold.6+0x242/0x2fe [ 201.038942] __asan_report_load4_noabort+0x19/0x20 [ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau] [ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau] [ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau] [ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau] [ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau] [ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau] [ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau] [ 201.039264] pci_pm_runtime_resume+0x130/0x250 [ 201.039269] ? pci_restore_standard_config+0x70/0x70 [ 201.039275] __rpm_callback+0x1f2/0x5d0 [ 201.039279] ? rpm_resume+0x560/0x18a0 [ 201.039283] ? pci_restore_standard_config+0x70/0x70 [ 201.039287] ? pci_restore_standard_config+0x70/0x70 [ 201.039291] ? pci_restore_standard_config+0x70/0x70 [ 201.039296] rpm_callback+0x175/0x210 [ 201.039300] ? pci_restore_standard_config+0x70/0x70 [ 201.039305] rpm_resume+0xcc3/0x18a0 [ 201.039312] ? rpm_callback+0x210/0x210 [ 201.039317] ? __pm_runtime_resume+0x9e/0x100 [ 201.039322] ? kasan_check_write+0x14/0x20 [ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039333] __pm_runtime_resume+0xac/0x100 [ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau] [ 201.039380] process_one_work+0x7a0/0x14d0 [ 201.039388] ? cancel_delayed_work_sync+0x20/0x20 [ 201.039392] ? lock_acquire+0x113/0x310 [ 201.039398] ? kasan_check_write+0x14/0x20 [ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039409] worker_thread+0x86/0xb50 [ 201.039418] kthread+0x2e9/0x3a0 [ 201.039422] ? process_one_work+0x14d0/0x14d0 [ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 201.039431] ret_from_fork+0x3a/0x50 [ 201.039441] [ 201.039444] Allocated by task 79: [ 201.039449] save_stack+0x43/0xd0 [ 201.039452] kasan_kmalloc+0xc4/0xe0 [ 201.039456] kmem_cache_alloc_trace+0x10a/0x260 [ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau] [ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper] [ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper] [ 201.039529] process_one_work+0x7a0/0x14d0 [ 201.039533] worker_thread+0x86/0xb50 [ 201.039537] kthread+0x2e9/0x3a0 [ 201.039541] ret_from_fork+0x3a/0x50 [ 201.039543] [ 201.039546] Freed by task 0: [ 201.039549] (stack is not available) [ 201.039551] [ 201.039555] The buggy address belongs to the object at ffff88076738c1a8 which belongs to the cache kmalloc-2048 of size 2048 [ 201.039559] The buggy address is located 1192 bytes inside of 2048-byte region [ffff88076738c1a8, ffff88076738c9a8) [ 201.039563] The buggy address belongs to the page: [ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0 [ 201.039573] flags: 0x8000000000008100(slab|head) [ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0 [ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 201.039585] page dumped because: kasan: bad access detected [ 201.039588] [ 201.039591] Memory state around the buggy address: [ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 201.039604] ^ [ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039613] ================================================================== Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau: Use drm_connector_list_iter_* for iterating connectorsLyude Paul
Every codepath in nouveau that loops through the connector list currently does so using the old method, which is prone to race conditions from MST connectors being created and destroyed. This has been causing a multitude of problems, including memory corruption from trying to access connectors that have already been freed! Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()Dan Carpenter
The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-16drm/nouveau/kms/nv50-: ensure window updates are submitted when flushing mst ↵Ben Skeggs
disables It was possible for this to be skipped when shutting down MST streams, and leaving the core channel interlocked with a wndw channel update that never happens - leading to a hung display. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-By: Lyude Paul <lyude@redhat.com>
2018-07-16usb: cdc_acm: Add quirk for Castles VEGA3000Lubomir Rintel
The device (a POS terminal) implements CDC ACM, but has not union descriptor. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Merge tag 'usb-ci-v4.18-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: One regression fix causes imx51 board hang when using ULPI PHY
2018-07-16Merge branch 'TLS-offload-rx-netdev-and-mlx5'David S. Miller
Boris Pismenny says: ==================== TLS offload rx, netdev & mlx5 The following series provides TLS RX inline crypto offload. v5->v4: - Remove the Kconfig to mutually exclude both IPsec and TLS v4->v3: - Remove the iov revert for zero copy send flow v2->v3: - Fix typo - Adjust cover letter - Fix bug in zero copy flows - Use network byte order for the record number in resync - Adjust the sequence provided in resync v1->v2: - Fix bisectability problems due to variable name changes - Fix potential uninitialized return value This series completes the generic infrastructure to offload TLS crypto to a network devices. It enables the kernel TLS socket to skip decryption and authentication operations for SKBs marked as decrypted on the receive side of the data path. Leaving those computationally expensive operations to the NIC. This infrastructure doesn't require a TCP offload engine. Instead, the NIC decrypts a packet's payload if the packet contains the expected TCP sequence number. The TLS record authentication tag remains unmodified regardless of decryption. If the packet is decrypted successfully and it contains an authentication tag, then the authentication check has passed. Otherwise, if the authentication fails, then the packet is provided unmodified and the KTLS layer is responsible for handling it. Out-Of-Order TCP packets are provided unmodified. As a result, in the slow path some of the SKBs are decrypted while others remain as ciphertext. The GRO and TCP layers must not coalesce decrypted and non-decrypted SKBs. At the worst case a received TLS record consists of both plaintext and ciphertext packets. These partially decrypted records must be reencrypted, only to be decrypted. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. Partial decryption - Software must handle the case of a TLS record that was only partially decrypted by HW. This can happen due to packet reordering. 2. Resynchronization - tls_read_size calls the device driver to resynchronize HW whenever it lost track of the TLS record framing in the TCP stream. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC identifies packets that should be offloaded according to the 5-tuple and the TCP sequence number. If these match and the packet is decrypted and authenticated successfully, then a syndrome is provided to software. Otherwise, the packet is unmodified. Decrypted and non-decrypted packets aren't coalesced by the network stack, and the KTLS layer decrypts and authenticates partially decrypted records. The NIC provides an indication whenever a resync is required. The resync operation is triggered by the KTLS layer while parsing TLS record headers. Finally, we measure the performance obtained by running single stream iperf with two Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz machines connected back-to-back with Innova TLS (40Gbps) NICs. We compare TCP (upper bound) and KTLS-Offload running both in Tx and Rx. The results show that the performance of offload is comparable to TCP. | Bandwidth (Gbps) | CPU Tx (%) | CPU rx (%) TCP | 28.8 | 5 | 12 KTLS-Offload-Tx-Rx | 28.6 | 7 | 14 Paper: https://netdevconf.org/2.2/papers/pismenny-tlscrypto-talk.pdf ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: IPsec, fix byte count in CQEBoris Pismenny
This patch fixes the byte count indication in CQE for processed IPsec packets that contain a metadata header. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5: Accel, add common metadata functionsBoris Pismenny
This patch adds common functions to handle mellanox metadata headers. These functions are used by IPsec and TLS to process FPGA metadata. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, build TLS netdev from capabilitiesBoris Pismenny
This patch enables TLS Rx based on available HW capabilities. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, add software statisticsBoris Pismenny
This patch adds software statistics for TLS to count important events. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, add Innova TLS rx data pathBoris Pismenny
Implement the TLS rx offload data path according to the requirements of the TLS generic NIC offload infrastructure. Special metadata ethertype is used to pass information to the hardware. When hardware loses synchronization a special resync request metadata message is used to request resync. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, add innova rx supportBoris Pismenny
Add the mlx5 implementation of the TLS Rx routines to add/del TLS contexts, also add the tls_dev_resync_rx routine to work with the TLS inline Rx crypto offload infrastructure. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5: Accel, add TLS rx offload routinesBoris Pismenny
In Innova TLS, TLS contexts are added or deleted via a command message over the SBU connection. The HW then sends a response message over the same connection. Complete the implementation for Innova TLS (FPGA-based) hardware by adding support for rx inline crypto offload. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, refactor variable namesBoris Pismenny
For symmetry, we rename mlx5e_tls_offload_context to mlx5e_tls_offload_context_tx before we add mlx5e_tls_offload_context_rx. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Fix zerocopy_from_iter iov handlingBoris Pismenny
zerocopy_from_iter iterates over the message, but it doesn't revert the updates made by the iov iteration. This patch fixes it. Now, the iov can be used after calling zerocopy_from_iter. Fixes: 3c4d75591 ("tls: kernel TLS support") Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Add rx inline crypto offloadBoris Pismenny
This patch completes the generic infrastructure to offload TLS crypto to a network device. It enables the kernel to skip decryption and authentication of some skbs marked as decrypted by the NIC. In the fast path, all packets received are decrypted by the NIC and the performance is comparable to plain TCP. This infrastructure doesn't require a TCP offload engine. Instead, the NIC only decrypts packets that contain the expected TCP sequence number. Out-Of-Order TCP packets are provided unmodified. As a result, at the worst case a received TLS record consists of both plaintext and ciphertext packets. These partially decrypted records must be reencrypted, only to be decrypted. The notable differences between SW KTLS Rx and this offload are as follows: 1. Partial decryption - Software must handle the case of a TLS record that was only partially decrypted by HW. This can happen due to packet reordering. 2. Resynchronization - tls_read_size calls the device driver to resynchronize HW after HW lost track of TLS record framing in the TCP stream. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Fill software context without allocationBoris Pismenny
This patch allows tls_set_sw_offload to fill the context in case it was already allocated previously. We will use it in TLS_DEVICE to fill the RX software context. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Split tls_sw_release_resources_rxBoris Pismenny
This patch splits tls_sw_release_resources_rx into two functions one which releases all inner software tls structures and another that also frees the containing structure. In TLS_DEVICE we will need to release the software structures without freeeing the containing structure, which contains other information. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Split decrypt_skb to two functionsBoris Pismenny
Previously, decrypt_skb also updated the TLS context. Now, decrypt_skb only decrypts the payload using the current context, while decrypt_skb_update also updates the state. Later, in the tls_device Rx flow, we will use decrypt_skb directly. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Refactor tls_offload variable namesBoris Pismenny
For symmetry, we rename tls_offload_context to tls_offload_context_tx before we add tls_offload_context_rx. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tcp: Don't coalesce decrypted and encrypted SKBsBoris Pismenny
Prevent coalescing of decrypted and encrypted SKBs in GRO and TCP layer. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: Add TLS rx resync NDOBoris Pismenny
Add new netdev tls op for resynchronizing HW tls context Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: Add TLS RX offload featureIlya Lesokhin
This patch adds a netdev feature to configure TLS RX inline crypto offload. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: Add decrypted field to skbBoris Pismenny
The decrypted bit is propogated to cloned/copied skbs. This will be used later by the inline crypto receive side offload of tls. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16Merge branch 'mvpp2-add-debugfs-interface'David S. Miller
Maxime Chevallier says: ==================== net: mvpp2: add debugfs interface The PPv2 Header Parser and Classifier are not straightforward to debug, having easy access to some of the many lookup tables configuration is helpful during development and debug. This series adds a basic debugfs interface, allowing to read data from the Header Parser and some of the Classifier tables. For now, the interface is read-only, and contains only some basic info. This was actually used during RSS development, and might be useful to troubleshoot some issues we might find. The first patch of the series converts the mvpp2 files to SPDX, which eases adding the new debugfs dedicated file. The second patch adds the interface, and exposes basic Header Parser data. The 3rd patch adds a hit counter for the Header Parser TCAM. The 4th patch exposes classifier info. The 5th patch adds some hit counters for some of the classifier engines. Changes since V1: - Rebased on the lastest net-next - Made cls_flow_get non static so that it can be used in mvpp2_debugfs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: mvpp2: debugfs: add classifier hit countersMaxime Chevallier
The classification operations that are used for RSS make use of several lookup tables. Having hit counters for these tables is really helpful to determine what flows were matched by ingress traffic, and see the path of packets among all the classifier tables. This commit adds hit counters for the 3 tables used at the moment : - The decoding table (also called lookup_id table), that links flows identified by the Header Parser to the flow table. There's one entry per flow, located at : .../mvpp2/<controller>/flows/XX/dec_hits Note that there are 21 flows in the decoding table, whereas there are 52 flows in the Header Parser. That's because there are several kind of traffic that will match a given flow. Reading the hit counter from one sub-flow will clear all hit counter that have the same flow_id. This also applies to the flow_hits. - The flow table, that contains all the different lookups to be performed by the classifier for each packet of a given flow. The match is done on the first entry of the flow sequence. - The C2 engine entries, that are used to assign the default rx queue, and enable or disable RSS for a given port. There's one entry per flow, located at: .../mvpp2/<controller>/flows/XX/flow_hits There is one C2 entry per port, so the c2 hit counter is located at : .../mvpp2/<controller>/ethX/c2_hits All hit counter values are 16-bits clear-on-read values. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: mvpp2: debugfs: add entries for classifier flowsMaxime Chevallier
The classifier configuration for RSS is quite complex, with several lookup tables being used. This commit adds useful info in debugfs to see how the different tables are configured : Added 2 new entries in the per-port directory : - .../eth0/default_rxq : The default rx queue on that port - .../eth0/rss_enable : Indicates if RSS is enabled in the C2 entry Added the 'flows' directory : It contains one entry per sub-flow. a 'sub-flow' is a unique path from Header Parser to the flow table. Multiple sub-flows can point to the same 'flow' (each flow has an id from 8 to 29, which is its index in the Lookup Id table) : - .../flows/00/... /01/... ... /51/id : The flow id. There are 21 unique flows. There's one flow per combination of the following parameters : - L4 protocol (TCP, UDP, none) - L3 protocol (IPv4, IPv6) - L3 parameters (Fragmented or not) - L2 parameters (Vlan tag presence or not) .../type : The flow type. This is an even higher level flow, that we manipulate with ethtool. It can be : "udp4" "tcp4" "udp6" "tcp6" "ipv4" "ipv6" "other". .../eth0/... .../eth1/engine : The hash generation engine used for this flow on the given port .../hash_opts : The hash generation options indicating on what data we base the hash (vlan tag, src IP, src port, etc.) Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: mvpp2: debugfs: add hit counter stats for Header Parser entriesMaxime Chevallier
One helpful feature to help debug the Header Parser TCAM filter in PPv2 is to be able to see if the entries did match something when a packet comes in. This can be done by using the built-in hit counter for TCAM entries. This commit implements reading the counter, and exposing its value on debugfs for each filter entry. The counter is a 16-bits clear-on-read value, located at: .../mvpp2/<controller>/parser/XXX/hits Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: mvpp2: add a debugfs interface for the Header ParserMaxime Chevallier
Marvell PPv2 Packer Header Parser has a TCAM based filter, that is not trivial to configure and debug. Being able to dump TCAM entries from userspace can be really helpful to help development of new features and debug existing ones. This commit adds a basic debugfs interface for the PPv2 driver, focusing on TCAM related features. <mnt>/mvpp2/ --- f2000000.ethernet \- f4000000.ethernet --- parser --- 000 ... | \- 001 | \- ... | \- 255 --- ai | \- header_data | \- lookup_id | \- sram | \- valid \- eth1 ... \- eth2 --- mac_filter \- parser_entries \- vid_filter There's one directory per PPv2 instance, named after pdev->name to make sure names are uniques. In each of these directories, there's : - one directory per interface on the controller, each containing : - "mac_filter", which lists all filtered addresses for this port (based on TCAM, not on the kernel's uc / mc lists) - "parser_entries", which lists the indices of all valid TCAM entries that have this port in their port map - "vid_filter", which lists the vids allowed on this port, based on TCAM - one "parser" directory (the parser is common to all ports), containing : - one directory per TCAM entry (256 of them, from 0 to 255), each containing : - "ai" : Contains the 1 byte Additional Info field from TCAM, and - "header_data" : Contains the 8 bytes Header Data extracted from the packet - "lookup_id" : Contains the 4 bits LU_ID - "sram" : contains the raw SRAM data, which is the result of the TCAM lookup. This readonly at the moment. - "valid" : Indicates if the entry is valid of not. All entries are read-only, and everything is output in hex form. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: mvpp2: switch to SPDX identifiersAntoine Tenart
Use the appropriate SPDX license identifiers and drop the license text. This patch is only cosmetic. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16Merge tag 'drm-intel-fixes-2018-07-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes I already pulled the first fix, pull the GVT fixes. - GVT fix for KBL vGPU hang to update virtual register from LRI. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713070922.GA19840@intel.com
2018-07-16Merge branch 'drm-armada-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm ↵Dave Airlie
into drm-fixes Two armada fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713075427.GA16160@rmk-PC.armlinux.org.uk
2018-07-16Merge tag 'drm-misc-fixes-2018-07-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc5: - Single fix for a build error when the driver is builtin, but the backend is a loadable module. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c596cf5-3f24-070e-74f2-c59bfbaf68fa@linux.intel.com
2018-07-16Merge tag 'drm/tegra/for-4.18-rc5' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.18-rc5 This contains a couple of one- or two-line fixes for various minor issues in the Tegra driver. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712070142.15571-1-thierry.reding@gmail.com
2018-07-16Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few display and GPUVM fixes for 4.18. A few more fixes for 4.18. Two display fixes and a fix to avoid a segfault if the GPU does not power up properly on resume. These are on top of my pull from earlier this week. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712043820.2877-1-alexander.deucher@amd.com
2018-07-16Merge tag 'drm-intel-fixes-2018-07-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix hotplug irq ack on i965/g4x (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710213249.GA16479@intel.com
generated by cgit (git 2.34.1) at 2025-09-22 12:38:47 +0000