| Age | Commit message (Collapse) | Author |
|---|
|
Currently, arch_mem_timer cpumask is set to cpu_all_mask which should be
fine. However, cpu_possible_mask is more accurate and if there are other
clockevent source in the system which are set to cpu_possible_mask, then
having cpu_all_mask may result in issue.
E.g. on a platform with arm,sp804 timer with rating 300 and
cpu_possible_mask and this arch_mem_timer timer with rating 400 and
cpu_all_mask, tick_check_preferred may choose both preferred as the
cpumasks are not equal though they must be.
This issue was root caused incorrectly initially and a fix was merged as
commit 1332a9055801 ("tick: Prefer a lower rating device only if it's CPU
local device").
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-2-git-send-email-sudeep.holla@arm.com
|
|
This reverts commit 1332a90558013ae4242e3dd7934bdcdeafb06c0d.
The original issue was not because of incorrect checking of cpumask for
both new and old tick device. It was incorrectly analysed was due to the
misunderstanding of the comment and misinterpretation of the return value
from tick_check_preferred. The main issue is with the clockevent driver
that sets the cpumask to cpu_all_mask instead of cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-1-git-send-email-sudeep.holla@arm.com
|
|
return value"
This reverts commit 018d82e5f02ef3583411bcaa4e00c69786f46f19.
This breaks DDC in certain cases. Revert for 4.18 and previous kernels.
For 4.19, this is fixed with the following more extensive patches:
drm/amd/display: Serialize is_dp_sink_present
drm/amd/display: Break out function to simply read aux reply
drm/amd/display: Return aux replies directly to DRM
drm/amd/display: Right shift AUX reply value sooner than later
drm/amd/display: Read AUX channel even if only status byte is returned
Link: https://lists.freedesktop.org/archives/amd-gfx/2018-July/023788.html
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Pull drm fixes from Dave Airlie:
"This just contains some etnaviv fixes and a MAINTAINERS update for the
new drm tree locations"
* tag 'drm-fixes-2018-07-10' of git://anongit.freedesktop.org/drm/drm:
MAINTAINERS: update drm tree
drm/etnaviv: bring back progress check in job timeout handler
drm/etnaviv: Fix driver unregistering
drm/etnaviv: Check for platform_device_register_simple() failure
|
|
Commit 52cdbdd49853 (driver core: correct device's shutdown order)
introduced a regression by breaking device shutdown on some systems.
Namely, the devices_kset_move_last() call in really_probe() added by
that commit is a mistake as it may cause parents to follow children
in the devices_kset list which then causes shutdown to fail. For
example, if a device has children before really_probe() is called
for it (which is not uncommon), that call will cause it to be
reordered after the children in the devices_kset list and the
ordering of that list will not reflect the correct device shutdown
order any more.
Also it causes the devices_kset list to be constantly reordered
until all drivers have been probed which is totally pointless
overhead in the majority of cases and it only covered an issue
with system shutdown, while system-wide suspend/resume potentially
had the same issue on the affected platforms (which was not covered).
Moreover, the shutdown issue originally addressed by the change in
really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc
any more, since dra7 started to use the sdhci-omap driver which
doesn't disable any regulators during shutdown, so the really_probe()
part of commit 52cdbdd49853 can be safely reverted. [The original
issue was related to the omap_hsmmc driver used by dra7 previously.]
For the above reasons, revert the really_probe() modifications made
by commit 52cdbdd49853.
The other code changes made by commit 52cdbdd49853 are useful and
they need not be reverted.
Fixes: 52cdbdd49853 (driver core: correct device's shutdown order)
Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/
Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Mark reported that syzkaller triggered a KASAN detected slab-out-of-bounds
bug in ___bpf_prog_run() with a BPF_LD | BPF_ABS word load at offset 0x8001.
After further investigation it became clear that the issue was the
BPF_LDX_MEM() which takes offset as an argument whereas it cannot encode
larger than S16_MAX offsets into it. For this synthetical case we need to
move the full address into tmp register instead and do the LDX without
immediate value.
Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 38fc4248677552ce35efc09902fdcb06b61d7ef9.
Distributions such as Fedora and Debian do not package the ELF linker
scripts with their toolchains, resulting in kernel build failures such
as:
| CHK include/generated/compile.h
| LD [M] arch/arm64/crypto/sha512-ce.o
| aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory
| make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1
| make: *** [Makefile:1029: arch/arm64/crypto] Error 2
Revert back to the linux targets for now, adding a comment to the Makefile
so we don't accidentally break this in the future.
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: <stable@vger.kernel.org>
Fixes: 38fc42486775 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants")
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The below path error can occur:
# ./xdp2skb_meta.sh --dev eth0 --list
./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory
So just use command names instead of absolute paths of tc and ip.
In addition, it allow callers to redefine $TC and $IP paths
Fixes: 36e04a2d78d9 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB")
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The inline data code was updating the raw inode directly; this is
problematic since if metadata checksums are enabled,
ext4_mark_inode_dirty() must be called to update the inode's checksum.
In addition, the jbd2 layer requires that get_write_access() be called
before the metadata buffer is modified. Fix both of these problems.
https://bugzilla.kernel.org/show_bug.cgi?id=200443
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Cast *tmp* and *nb_base* to u64 in order to give the compiler
complete information about the proper arithmetic to use.
Notice that such variables are used in contexts that expect
expressions of type u64 (64 bits, unsigned) and the following
expressions are currently being evaluated using 32-bit arithmetic:
tmp << 25
nb_base << 25
Addresses-Coverity-ID: 200586 ("Unintentional integer overflow")
Addresses-Coverity-ID: 200587 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Use new return type vm_fault_t for fault handler. For now,
this is just documenting that the function returns a
VM_FAULT value rather than an errno. Once all instances are
converted, vm_fault_t will become a distinct type.
Ref-> commit 1c8f422059ae ("mm: change return type to
vm_fault_t") was added in 4.17-rc1 to introduce the new
typedef vm_fault_t. Currently we are making change to all
drivers to return vm_fault_t for page fault handlers. As
part of that char/agp driver is also getting changed to
return vm_fault_t type from fault handler.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Mail to dri-devel went out, linux-next was updated, but we forgot this
one here.
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706072842.9009-1-daniel.vetter@ffwll.ch
|
|
into drm-fixes
Lucas wrote:
"a couple of small fixes:
- 2 patches from Fabio to fix module reloading
- one patch to fix a userspace visible regression, where the job
timeout is a bit too eager and kills legitimate jobs"
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530868450.15725.8.camel@pengutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- spectrev1 pattern fix in hiddev from Gustavo A. R. Silva
- bounds check fix for hid-debug from Daniel Rosenberg
- regression fix for HID autobinding from Benjamin Tissoires
- removal of excessive logging from i2c-hid driver from Jason Andryuk
- fix specific to 2nd generation of Wacom Intuos devices from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hiddev: fix potential Spectre v1
HID: i2c-hid: Fix "incomplete report" noise
HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
HID: debug: check length before copy_to_user()
HID: core: allow concurrent registration of drivers
|
|
Update my TDA998x HDMI encoder MAINTAINERS entry to include the
dt-bindings header, and a keyword pattern to catch patches containing
the DT compatible. Also change the status to "maintained" rather than
"supported".
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We are not supposed to use u32 in uapi, so change the flags member of
struct sock_txtime from u32 to __u32 instead.
Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rhashtable_free_and_destroy() cancels re-hash deferred work
then walks and destroys elements. at this moment, some elements can be
still in future_tbl. that elements are not destroyed.
test case:
nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy
all elements of sets before destroying sets and chains.
But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl.
so that splat occurred.
test script:
%cat test.nft
table ip aa {
map map1 {
type ipv4_addr : verdict;
elements = {
0 : jump a0,
1 : jump a0,
2 : jump a0,
3 : jump a0,
4 : jump a0,
5 : jump a0,
6 : jump a0,
7 : jump a0,
8 : jump a0,
9 : jump a0,
}
}
chain a0 {
}
}
flush ruleset
table ip aa {
map map1 {
type ipv4_addr : verdict;
elements = {
0 : jump a0,
1 : jump a0,
2 : jump a0,
3 : jump a0,
4 : jump a0,
5 : jump a0,
6 : jump a0,
7 : jump a0,
8 : jump a0,
9 : jump a0,
}
}
chain a0 {
}
}
flush ruleset
%while :; do nft -f test.nft; done
Splat looks like:
[ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363!
[ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24
[ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables]
[ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff
[ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282
[ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000
[ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90
[ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa
[ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200
[ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000
[ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0
[ 200.930353] Call Trace:
[ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables]
[ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables]
[ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables]
[ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables]
[ 200.959532] ? nla_parse+0xab/0x230
[ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink]
[ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink]
[ 200.975525] ? debug_show_all_locks+0x290/0x290
[ 200.980363] ? debug_show_all_locks+0x290/0x290
[ 200.986356] ? sched_clock_cpu+0x132/0x170
[ 200.990352] ? find_held_lock+0x39/0x1b0
[ 200.994355] ? sched_clock_local+0x10d/0x130
[ 200.999531] ? memset+0x1f/0x40
V2:
- free all tables requested by Herbert Xu
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes.
These are bug fixes in error code paths, TC Flower VLAN TCI flow
checking bug fix, proper filtering of Broadcast packets if IFF_BROADCAST
is not set, and a bug fix in bnxt_get_max_rings() to return 0 ring
parameters when the return value is -ENOMEM.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix bug in the error code path when bnxt_request_irq() returns failure.
bnxt_disable_napi() should not be called in this error path because
NAPI has not been enabled yet.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling bnxt_set_max_func_irqs() to modify the max IRQ count requested or
freed by the RDMA driver is flawed. The max IRQ count is checked when
re-initializing the IRQ vectors and this can happen multiple times
during ifup or ethtool -L. If the max IRQ is reduced and the RDMA
driver is operational, we may not initailize IRQs correctly. This
problem shows up on VFs with very small number of MSIX.
There is no other logic that relies on the IRQ count excluding the ones
used by RDMA. So we fix it by just removing the call to subtract or
add the IRQs used by RDMA.
Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the driver assumes IFF_BROADCAST is always set and always sets
the broadcast filter. Modify the code to set or clear the broadcast
filter according to the IFF_BROADCAST flag.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code returns -ENOMEM and does not bother to set the output
parameters to 0 when no rings are available. Some callers, such as
bnxt_get_channels() will display garbage ring numbers when that happens.
Fix it by always setting the output parameters.
Fixes: 6e6c5a57fbe1 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there aren't enough RX rings available, the driver will attempt to
use a single RX ring without the aggregation ring. If that also
fails, the BNXT_FLAG_AGG_RINGS flag is cleared but the other ring
parameters are not set consistently to reflect that. If more RX
rings become available at the next open, the RX rings will be in
an inconsistent state and may crash when freeing the RX rings.
Fix it by restoring the BNXT_FLAG_AGG_RINGS if not enough RX rings are
available to run without aggregation rings.
Fixes: bdbd1eb59c56 ("bnxt_en: Handle no aggregation ring gracefully.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible that OVS may set don’t care for DEI/CFI bit in
vlan_tci mask. Hence, checking for vlan_tci exact match will endup
in a vlan flow rejection.
This patch fixes the problem by checking for vlan_pcp and vid
separately, instead of checking for the entire vlan_tci.
Fixes: e85a9be93cf1 (bnxt_en: do not allow wildcard matches for L2 flows)
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aIdo Schimmel says:
====================
mlxsw: More Spectrum-2 preparations
This is the second and last set of preparations towards initial
Spectrum-2 support in mlxsw. It mainly re-arranges parts of the code
that need to work with both ASICs, but somewhat differ.
The first three patches allow different ASICs to register different set
of operations for KVD linear (KVDL) management. In Spectrum-2 there is
no linear memory and instead entries that reside there in Spectrum
(e.g., nexthops) are hashed and inserted to the hash-based KVD memory.
The fourth patch does a similar restructuring in the low-level multicast
router code. This is necessary because multicast routing is implemented
using regular circuit TCAM (C-TCAM) in Spectrum, whereas Spectrum-2 uses
an algorithmic TCAM (A-TCAM).
Next six patches prepare the ACL code for the introduction of A-TCAM in
follow-up patch sets.
Last two patches allow different ASICs to require different firmware
versions and add two resources that need to be queried from firmware by
Spectrum-2 specific code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These resources are needed for Spectrum-2 KVD linear management
implementation.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prepare for Spectrum-2 FW version checking and
make mlxsw_sp_fw_rev_validate() per-ASIC as well as required FW revision
and FW filename.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For Spectrum-2, we need to insert priority to C-TCAM because HW
needs that info in order to correctly process scenarios where rules
are in both C-TCAM and A-TCAM.
So extend the mlxsw_sp_acl_ctcam_entry_add() args to accept indication
if priority needs to be filled up and implement the priority
computation and fill-up.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is going to be needed for Spectrum-2 C-TCAM implementation.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since Spectrum-2 encodes blocks into different HW layout, push this
code into Spectrum-specific op.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the flex keys for Spectrum-2 differ not only in blocks definitions
but also in encoding layout, prepare for the implementation and pass
Spectrum/Spectrum-2 specific ops down to mlxsw_afk_create.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ops to be called on driver instance init and fini.
This is needed in order to be possible to do Spectrum-2 specific init
and fini work.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To allow easy and clean Spectrum-2 implementation for things that differ
from Spectrum, split the existing ACL TCAM code 3 ways:
1) common code that calls Spectrum/Spectrum-2 specific ops
2) Spectrum ops implementations
3) common C-TCAM code that is going to be shared between Spectrum and
Spectrum-2 implementations
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since Spectrum-2 has different handling of TCAM, push Spectrum MR TCAM
bits to a separate file accessible by ops which allows to implement
Spectrum-2 specific ops.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the Spectrum-2 KVD linear manager implementation, entry_count will be
needed even for the free function. So pass it down.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Future Spectrum-2 KVD linear manager implementation needs to know type
of the entry to alloc and free. So define the types in an enum and
pass it down to alloc and free functions. Once the entry type
is passed down, KVDL common part knows sizes of each entry types,
so replace size function arg with entry count.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In Spectrum-2 there is a different implementation of KVD linear
management. Unlike in Spectrum where there is a single index space,
in Spectrum-2 the indexes are per-resource. Also there is need to
explicitly tell HW that an entry is no longer used.
So push out the existing implementation into spectrum1_kvdl.c and
prepare ops infrastructure to allow new implementation in a follow-up.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This restores the use of 2-factor allocation helpers that were already
fixed treewide. Please do not use open-coded multiplication; prefer,
instead, using 2-factor allocation helpers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 74d4a8f8d378 ("tcp: remove sk_can_gso() use"), the code
doesn't care whether the interface supports SG.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On Tegra30 Cardhu the PCA9546 I2C mux is not ACK'ing I2C commands on
resume from suspend (which is caused by the reset signal for the I2C
mux not being configured correctl). However, this NACK is causing the
Tegra30 to hang on resuming from suspend which is not expected as we
detect NACKs and handle them. The hang observed appears to occur when
resetting the I2C controller to recover from the NACK.
Commit 77821b4678f9 ("i2c: tegra: proper handling of error cases") added
additional error handling for some error cases including NACK, however,
it appears that this change conflicts with an early fix by commit
f70893d08338 ("i2c: tegra: Add delay before resetting the controller
after NACK"). After commit 77821b4678f9 was made we now disable 'packet
mode' before the delay from commit f70893d08338 happens. Testing shows
that moving the delay to before disabling 'packet mode' fixes the hang
observed on Tegra30. The delay was added to give the I2C controller
chance to send a stop condition and so it makes sense to move this to
before we disable packet mode. Please note that packet mode is always
enabled for Tegra.
Fixes: 77821b4678f9 ("i2c: tegra: proper handling of error cases")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@vger.kernel.org
|
|
Edward Cree says:
====================
fix use-after-free bugs in skb list processing
A couple of bugs in skb list handling were spotted by Dan Carpenter, with
the help of Smatch; following up on them I found a couple more similar
cases. This series fixes them by changing the relevant loops to use the
dequeue-enqueue model (rather than in-place list modification).
v3: fixed another similar bug in __netif_receive_skb_list_core().
v2: dropped patch #3 (new list.h helper), per DaveM's request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__netif_receive_skb_core can free the skb, so we have to use the dequeue-
enqueue model when calling it from __netif_receive_skb_list_core.
Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nf_hook() can free the skb, so we need to remove it from the list before
calling, and add passed skbs to a sublist afterwards.
Fixes: 17266ee93984 ("net: ipv4: listified version of ip_rcv")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In netif_receive_skb_list_internal(), all of skb_defer_rx_timestamp(),
do_xdp_generic() and enqueue_to_backlog() can lead to kfree(skb). Thus,
we cannot wait until after they return to remove the skb from the list;
instead, we remove it first and, in the pass case, add it to a sublist
afterwards.
In the case of enqueue_to_backlog() we have already decided not to pass
when we call the function, so we do not need a sublist.
Fixes: 7da517a3bc52 ("net: core: Another step of skb receive list processing")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just like with PIPESTAT, the edge triggered IIR on i965/g4x
also causes problems for hotplug interrupts. To make sure
we don't get the IIR port interrupt bit stuck low with the
ISR bit high we must force an edge in ISR. Unfortunately
we can't borrow the PIPESTAT trick and toggle the enable
bits in PORT_HOTPLUG_EN as that act itself generates hotplug
interrupts. Instead we just have to loop until we've cleared
PORT_HOTPLUG_STAT, or we just give up and WARN.
v2: Don't frob with PORT_HOTPLUG_EN
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 0ba7c51a6fd80a89236f6ceb52e63f8a7f62bfd3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) Missing module autoloadfor icmp and icmpv6 x_tables matches,
from Florian Westphal.
2) Possible non-linear access to TCP header from tproxy, from
Mate Eckl.
3) Do not allow rbtree to be used for single elements, this patch
moves all set backend into one single module since such thing
can only happen if hashtable module is explicitly blacklisted,
which should not ever be done.
4) Reject error and standard targets from nft_compat for sanity
reasons, they are never used from there.
5) Don't crash on double hashsize module parameter, from Andrey
Ryabinin.
6) Drop dst on skb before placing it in the fragmentation
reassembly queue, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For most of these calls we can just pass NULL through to the fallback
function as the sb_dev. The only cases where we cannot are the cases where
we might be dealing with either an upper device or a driver that would
have configured things to support an sb_dev itself.
The only driver that has any significant change in this patch set should be
ixgbe as we can drop the redundant functionality that existed in both the
ndo_select_queue function and the fallback function that was passed through
to us.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch makes it so that instead of passing a void pointer as the
accel_priv we instead pass a net_device pointer as sb_dev. Making this
change allows us to pass the subordinate device through to the fallback
function eventually so that we can keep the actual code in the
ndo_select_queue call as focused on possible on the exception cases.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
commit ef1433f717a2 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.
Fix it here.
Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This patch adds a generic version of the ndo_select_queue functions for
either returning 0 or selecting a queue based on the processor ID. This is
generally meant to just reduce the number of functions we have to change
in the future when we have to deal with ndo_select_queue changes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
