| Age | Commit message (Collapse) | Author |
|---|
|
While fixing refcounting, e34ecee2ae79 ("aio: Fix a trinity splat")
incorrectly removed explicit RCU grace period before freeing kioctx.
The intention seems to be depending on the internal RCU grace periods
of percpu_ref; however, percpu_ref uses a different flavor of RCU,
sched-RCU. This can lead to kioctx being freed while RCU read
protected dereferences are still in progress.
Fix it by updating free_ioctx() to go through call_rcu() explicitly.
v2: Comment added to explain double bouncing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: e34ecee2ae79 ("aio: Fix a trinity splat")
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.13+
|
|
On guest exit, and when using GICv2 on GICv3, we use a dsb(st) to
force synchronization between the memory-mapped guest view and
the system-register view that the hypervisor uses.
This is incorrect, as the spec calls out the need for "a DSB whose
required access type is both loads and stores with any Shareability
attribute", while we're only synchronizing stores.
We also lack an isb after the dsb to ensure that the latter has
actually been executed before we start reading stuff from the sysregs.
The fix is pretty easy: turn dsb(st) into dsb(sy), and slap an isb()
just after.
Cc: stable@vger.kernel.org
Fixes: f68d2b1b73cc ("arm64: KVM: Implement vgic-v3 save/restore")
Acked-by: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The vgic code is trying to be clever when injecting GICv2 SGIs,
and will happily populate LRs with the same interrupt number if
they come from multiple vcpus (after all, they are distinct
interrupt sources).
Unfortunately, this is against the letter of the architecture,
and the GICv2 architecture spec says "Each valid interrupt stored
in the List registers must have a unique VirtualID for that
virtual CPU interface.". GICv3 has similar (although slightly
ambiguous) restrictions.
This results in guests locking up when using GICv2-on-GICv3, for
example. The obvious fix is to stop trying so hard, and inject
a single vcpu per SGI per guest entry. After all, pending SGIs
with multiple source vcpus are pretty rare, and are mostly seen
in scenario where the physical CPUs are severely overcomitted.
But as we now only inject a single instance of a multi-source SGI per
vcpu entry, we may delay those interrupts for longer than strictly
necessary, and run the risk of injecting lower priority interrupts
in the meantime.
In order to address this, we adopt a three stage strategy:
- If we encounter a multi-source SGI in the AP list while computing
its depth, we force the list to be sorted
- When populating the LRs, we prevent the injection of any interrupt
of lower priority than that of the first multi-source SGI we've
injected.
- Finally, the injection of a multi-source SGI triggers the request
of a maintenance interrupt when there will be no pending interrupt
in the LRs (HCR_NPIE).
At the point where the last pending interrupt in the LRs switches
from Pending to Active, the maintenance interrupt will be delivered,
allowing us to add the remaining SGIs using the same process.
Cc: stable@vger.kernel.org
Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
On my GICv3 system, the following is printed to the kernel log at boot:
kvm [1]: 8-bit VMID
kvm [1]: IDMAP page: d20e35000
kvm [1]: HYP VA range: 800000000000:ffffffffffff
kvm [1]: vgic-v2@2c020000
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ1
kvm [1]: virtual timer IRQ4
kvm [1]: Hyp mode initialized successfully
The KVM IDMAP is a mapping of a statically allocated kernel structure,
and so printing its physical address leaks the physical placement of
the kernel when physical KASLR in effect. So change the kvm_info() to
kvm_debug() to remove it from the log output.
While at it, trim the output a bit more: IRQ numbers can be found in
/proc/interrupts, and the HYP VA and vgic-v2 lines are not highly
informational either.
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
We currently don't allow resetting mapped IRQs from userspace, because
their state is controlled by the hardware. But we do need to reset the
state when the VM is reset, so we provide a function for the 'owner' of
the mapped interrupt to reset the interrupt state.
Currently only the timer uses mapped interrupts, so we call this
function from the timer reset logic.
Cc: stable@vger.kernel.org
Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer")
Signed-off-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Calling vcpu_load() registers preempt notifiers for this vcpu and calls
kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy
lifting on arm/arm64 and will try to do things such as enabling the
virtual timer and setting us up to handle interrupts from the timer
hardware.
Loading state onto hardware registers and enabling hardware to signal
interrupts can be problematic when we're not actually about to run the
VCPU, because it makes it difficult to establish the right context when
handling interrupts from the timer, and it makes the register access
code difficult to reason about.
Luckily, now when we call vcpu_load in each ioctl implementation, we can
simply remove the call from the non-KVM_RUN vcpu ioctls, and our
kvm_arch_vcpu_load() is only used for loading vcpu content to the
physical CPU when we're actually going to run the vcpu.
Cc: stable@vger.kernel.org
Fixes: 9b062471e52a ("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl")
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Our irq_is_pending() helper function accesses multiple members of the
vgic_irq struct, so we need to hold the lock when calling it.
Add that requirement as a comment to the definition and take the lock
around the call in vgic_mmio_read_pending(), where we were missing it
before.
Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Update the initcall ordering to satisfy the following dependency
ordering:
1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI
By assigning them to the following initcall levels:
subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a small clump of USB fixes for 4.16-rc6.
Nothing major, just a number of fixes in lots of different drivers, as
well as a PHY driver fix that snuck into this tree. Full details are
in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: musb: Fix external abort in musb_remove on omap2430
phy: qcom-ufs: add MODULE_LICENSE tag
usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
usbip: vudc: fix null pointer dereference on udc->lock
xhci: Fix front USB ports on ASUS PRIME B350M-A
usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
usb: usbmon: Read text within supplied buffer size
usb: host: xhci-rcar: add support for r8a77965
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
usb: xhci: dbc: Fix lockdep warning
xhci: fix endpoint context tracer output
Revert "typec: tcpm: Only request matching pdos"
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
usb: quirks: add control message delay for 1b1c:1b20
uas: fix comparison for error code
usb: gadget: udc: renesas_usb3: add binging for r8a77965
usb: renesas_usbhs: add binding for r8a77965
usb: dwc2: fix STM32F7 USB OTG HS compatible
dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty core and serial driver fixes for 4.16-rc6.
They resolve some newly reported bugs, as well as some very old ones,
which is always nice to see. There is also a new device id added in
here for good measure.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: imx: fix bogus dev_err
serial: sh-sci: prevent lockup on full TTY buffers
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
earlycon: add reg-offset to physical address before mapping
serial: core: mark port as initialized in autoconfig
serial: 8250_pci: Don't fail on multiport card class
tty/serial: atmel: add new version check for usart
tty: make n_tty_read() always abort if hangup is in progress
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are three staging driver fixes for 4.16-rc6
Two of them are lockdep fixes for the ashmem driver that have been
reported by a number of people recently. The last one is a fix for the
comedi driver core.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
staging: comedi: fix comedi_nsamples_left.
staging: android: ashmem: Fix lockdep issue during llseek
|
|
Pull auxdisplay fixes from Miguel Ojeda:
"Silence a few warnings in auxdisplay.
- a couple of uninitialized warnings reported by the build service
- a doc comment warning under W=1
- three fall-through comments not recognized under W=1"
* tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux:
auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings
auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings
auxdisplay: panel: Change comments to silence fallthrough warnings
|
|
The kbuild test robot reported the following warning on sparc64:
kernel/jump_label.c: In function '__jump_label_update':
kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code);
On sparc64, the jump_label entry->code field is of type u32, but
pointers are 64-bit. Silence the warning by casting entry->code to an
unsigned long before casting it to a pointer. This is also what the
sparc jump label code does.
Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
|
|
32-bit kernels
In the following commit:
9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool")
... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels,
but we did not annotate the 32-bit path.
Annotate it similarly.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
POPF would trap if VIP was set regardless of whether IF was set. Fix it.
Suggested-by: Stas Sergeev <stsp@list.ru>
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 5ed92a8ab71f ("x86/vm86: Use the normal pt_regs area for vm86")
Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
POPF is currently broken -- add tests to catch the error. This
results in:
[RUN] POPF with VIP set and IF clear from vm86 mode
[INFO] Exited vm86 mode due to STI
[FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf)
because POPF currently fails to check IF before reporting a pending
interrupt.
This patch also makes the FAIL message a bit more informative.
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix a logic error that caused the test to exit with 0 even if test
cases failed.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bartoldeman@gmail.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This fixes a bug where the trap number that is returned by
__kvmppc_vcore_entry gets corrupted. The effect of the corruption
is that IPIs get ignored on POWER9 systems when the IPI is sent via
a doorbell interrupt to a CPU which is executing in a KVM guest.
The effect of the IPI being ignored is often that another CPU locks
up inside smp_call_function_many() (and if that CPU is holding a
spinlock, other CPUs then lock up inside raw_spin_lock()).
The trap number is currently held in register r12 for most of the
assembly-language part of the guest exit path. In that path, we
call kvmppc_subcore_exit_guest(), which is a C function, without
restoring r12 afterwards. Depending on the kernel config and the
compiler, it may modify r12 or it may not, so some config/compiler
combinations see the bug and others don't.
To fix this, we arrange for the trap number to be stored on the
stack from the 'guest_bypass:' label until the end of the function,
then the trap number is loaded and returned in r12 as before.
Cc: stable@vger.kernel.org # v4.8+
Fixes: fd7bacbca47a ("KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name()
-- whose implementation uses scsi_device_from_queue() to avoid trying to
access SCSI-specific resources from non-SCSI devices.
Fixes buildbot reported issue when CONFIG_SCSI isn't set:
ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined!
Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Initialize all the scsi_dh related 'struct multipath' members regardless
of whether a scsi_dh is in use or not.
The subtle (and fragile) SCSI-assuming legacy code clearly needs further
decoupling from non-SCSI (and/or developer understanding).
Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Reported-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The warnings are:
drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used
uninitialized in this function [-Wuninitialized]
At lines 109 and 207. Reported by Geert using the build service
several times, e.g.:
https://lkml.org/lkml/2018/2/19/303
They are two false positives, since num_chars > 0 in the three present
configurations (boston, malta, sead3). Initialize to 0 in order to
silence the warning.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Compiling with W=1 with gcc 7.2.0 gives 2 warnings:
drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or
member 't' not described in 'img_ascii_lcd_scroll'
drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function
parameter 'arg' description in 'img_ascii_lcd_scroll'
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like:
drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’:
drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall
through [-Wimplicit-fallthrough=]
Cc: Willy Tarreau <w@1wt.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
This fixes an oops on unbind / module unload (on the musb omap2430
platform).
musb_remove function now calls musb_platform_exit before disabling
runtime pm.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As reported by Jeremy Cline, running the new TPM libstub code in mixed
mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking
the TCG2 protocol, or when accessing the log_tbl pool allocation.
The reason turns out to be that in both cases, the 64-bit pointer
variables are not fully initialized by the 32-bit EFI code, and so
we should take care to zero initialize these variables beforehand,
or we'll end up dereferencing bogus pointers.
Reported-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hdegoede@redhat.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: javierm@redhat.com
Cc: linux-efi@vger.kernel.org
Cc: tweek@google.com
Link: http://lkml.kernel.org/r/20180313140922.17266-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The boost frequency is only applied from the RPS worker while someone is
waiting on a request and requested a boost. As such, when the user
wishes to change the frequency, we have to kick the worker in order to
re-evaluate whether to apply the boost frequency.
v2: Check num_waiters to decide if we should kick the worker to handle
boosting.
Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180308142648.4016-1-chris@chris-wilson.co.uk
(cherry picked from commit 59cd31f177b34deb834a5c97478502741be1cf2e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, we only allow ourselves to prune the fences so long as
all the waits completed (i.e. all the fences we checked were signaled),
and that the reservation snapshot did not change across the wait.
However, if we only waited for a subset of the reservation object, i.e.
just waiting for the last writer to complete as opposed to all readers
as well, then we would erroneously conclude we could prune the fences as
indeed although all of our waits were successful, they did not represent
the totality of the reservation object.
v2: We only need to check the shared fences due to construction (i.e.
all of the shared fences will be later than the exclusive fence, if
any).
Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307171303.29466-1-chris@chris-wilson.co.uk
(cherry picked from commit fa73055b8442c97b3ba7cd0aa57cd2ad32124201)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, BXT_PP is hardcoded with value '0'.
It practically disabled eDP backlight on MRB (BXT) platform.
This patch will tell which BXT_PP registers (there are two set of
PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing
table) and this will enabled eDP backlight controller on MRB (BXT)
platform.
v2:
- Remove unnecessary information in commit message.
- Assign vbt.backlight.controller to a backlight_controller variable and
return the variable value.
v3:
- Rebased to latest code base.
- updated commit title.
Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com
(cherry picked from commit 73c0fcac97bf7f4a6a61b825b205d1cf127cfca7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Hightlights include the following stable fixes:
- NFS: Fix an incorrect type in struct nfs_direct_req
- pNFS: Prevent the layout header refcount going to zero in
pnfs_roc()
- NFS: Fix unstable write completion"
* tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix unstable write completion
pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
NFS: Fix an incorrect type in struct nfs_direct_req
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.16
This is a fairly standard collection of fixes, there's no changes to the
core here just a bunch of small device specific changes for single
drivers plus an update to the MAINTAINERS file for the sgl5000.
|
|
'asoc/fix/rt5651', 'asoc/fix/samsung', 'asoc/fix/sgtl5000', 'asoc/fix/sunxi' and 'asoc/fix/wm-adsp' into asoc-linus
|
|
This reverts commit b27560e4d9e5240b5544c9c5650c7442e482646e as it
breaks the build for some arches :(
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1d1d53f85ddd..70a7398c20e2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4368,6 +4368,61 @@
usbcore.nousb [USB] Disable the USB subsystem
+ usbcore.quirks=
+ [USB] A list of quirks entries to supplement or
+ override the built-in usb core quirk list. List
+ entries are separated by commas. Each entry has
+ the form VID:PID:Flags where VID and PID are Vendor
+ and Product ID values (4-digit hex numbers) and
+ Flags is a set of characters, each corresponding
+ to a common usb core quirk flag as follows:
+ a = USB_QUIRK_STRING_FETCH_255 (string
+ descriptors must not be fetched using
+ a 255-byte read);
+ b = USB_QUIRK_RESET_RESUME (device can't resume
+ correctly so reset it instead);
+ c = USB_QUIRK_NO_SET_INTF (device can't handle
+ Set-Interface requests);
+ d = USB_QUIRK_CONFIG_INTF_STRINGS (device can't
+ handle its Configuration or Interface
+ strings);
+ e = USB_QUIRK_RESET (device can't be reset
+ (e.g morph devices), don't use reset);
+ f = USB_QUIRK_HONOR_BNUMINTERFACES (device has
+ more interface descriptions than the
+ bNumInterfaces count, and can't handle
+ talking to these interfaces);
+ g = USB_QUIRK_DELAY_INIT (device needs a pause
+ during initialization, after we read
+ the device descriptor);
+ h = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL (For
+ high speed and super speed interrupt
+ endpoints, the USB 2.0 and USB 3.0 spec
+ require the interval in microframes (1
+ microframe = 125 microseconds) to be
+ calculated as interval = 2 ^
+ (bInterval-1).
+ Devices with this quirk report their
+ bInterval as the result of this
+ calculation instead of the exponent
+ variable used in the calculation);
+ i = USB_QUIRK_DEVICE_QUALIFIER (device can't
+ handle device_qualifier descriptor
+ requests);
+ j = USB_QUIRK_IGNORE_REMOTE_WAKEUP (device
+ generates spurious wakeup, ignore
+ remote wakeup capability);
+ k = USB_QUIRK_NO_LPM (device can't handle Link
+ Power Management);
+ l = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL
+ (Device reports its bInterval as linear
+ frames instead of the USB 2.0
+ calculation);
+ m = USB_QUIRK_DISCONNECT_SUSPEND (Device needs
+ to be disconnected before suspend to
+ prevent spurious wakeup)
+ Example: quirks=0781:5580:bk,0a5c:5834:gij
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f4a548471f0f..42faaeead81b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -11,6 +11,143 @@
#include <linux/usb/hcd.h>
#include "usb.h"
+struct quirk_entry {
+ u16 vid;
+ u16 pid;
+ u32 flags;
+};
+
+static DEFINE_MUTEX(quirk_mutex);
+
+static struct quirk_entry *quirk_list;
+static unsigned int quirk_count;
+
+static char quirks_param[128];
+
+static int quirks_param_set(const char *val, const struct kernel_param *kp)
+{
+ char *p, *field;
+ u16 vid, pid;
+ u32 flags;
+ size_t i;
+
+ mutex_lock(&quirk_mutex);
+
+ if (!val || !*val) {
+ quirk_count = 0;
+ kfree(quirk_list);
+ quirk_list = NULL;
+ goto unlock;
+ }
+
+ for (quirk_count = 1, i = 0; val[i]; i++)
+ if (val[i] == ',')
+ quirk_count++;
+
+ if (quirk_list) {
+ kfree(quirk_list);
+ quirk_list = NULL;
+ }
+
+ quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry),
+ GFP_KERNEL);
+ if (!quirk_list) {
+ mutex_unlock(&quirk_mutex);
+ return -ENOMEM;
+ }
+
+ for (i = 0, p = (char *)val; p && *p;) {
+ /* Each entry consists of VID:PID:flags */
+ field = strsep(&p, ":");
+ if (!field)
+ break;
+
+ if (kstrtou16(field, 16, &vid))
+ break;
+
+ field = strsep(&p, ":");
+ if (!field)
+ break;
+
+ if (kstrtou16(field, 16, &pid))
+ break;
+
+ field = strsep(&p, ",");
+ if (!field || !*field)
+ break;
+
+ /* Collect the flags */
+ for (flags = 0; *field; field++) {
+ switch (*field) {
+ case 'a':
+ flags |= USB_QUIRK_STRING_FETCH_255;
+ break;
+ case 'b':
+ flags |= USB_QUIRK_RESET_RESUME;
+ break;
+ case 'c':
+ flags |= USB_QUIRK_NO_SET_INTF;
+ break;
+ case 'd':
+ flags |= USB_QUIRK_CONFIG_INTF_STRINGS;
+ break;
+ case 'e':
+ flags |= USB_QUIRK_RESET;
+ break;
+ case 'f':
+ flags |= USB_QUIRK_HONOR_BNUMINTERFACES;
+ break;
+ case 'g':
+ flags |= USB_QUIRK_DELAY_INIT;
+ break;
+ case 'h':
+ flags |= USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL;
+ break;
+ case 'i':
+ flags |= USB_QUIRK_DEVICE_QUALIFIER;
+ break;
+ case 'j':
+ flags |= USB_QUIRK_IGNORE_REMOTE_WAKEUP;
+ break;
+ case 'k':
+ flags |= USB_QUIRK_NO_LPM;
+ break;
+ case 'l':
+ flags |= USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL;
+ break;
+ case 'm':
+ flags |= USB_QUIRK_DISCONNECT_SUSPEND;
+ break;
+ /* Ignore unrecognized flag characters */
+ }
+ }
+
+ quirk_list[i++] = (struct quirk_entry)
+ { .vid = vid, .pid = pid, .flags = flags };
+ }
+
+ if (i < quirk_count)
+ quirk_count = i;
+
+unlock:
+ mutex_unlock(&quirk_mutex);
+
+ return param_set_copystring(val, kp);
+}
+
+static const struct kernel_param_ops quirks_param_ops = {
+ .set = quirks_param_set,
+ .get = param_get_string,
+};
+
+static struct kparam_string quirks_param_string = {
+ .maxlen = sizeof(quirks_param),
+ .string = quirks_param,
+};
+
+module_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644);
+MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks");
+
/* Lists of quirky USB devices, split in device quirks and interface quirks.
* Device quirks are applied at the very beginning of the enumeration process,
* right after reading the device descriptor. They can thus only match on device
@@ -320,8 +457,8 @@ static int usb_amd_resume_quirk(struct usb_device *udev)
return 0;
}
-static u32 __usb_detect_quirks(struct usb_device *udev,
- const struct usb_device_id *id)
+static u32 usb_detect_static_quirks(struct usb_device *udev,
+ const struct usb_device_id *id)
{
u32 quirks = 0;
@@ -339,21 +476,43 @@ static u32 __usb_detect_quirks(struct usb_device *udev,
return quirks;
}
+static u32 usb_detect_dynamic_quirks(struct usb_device *udev)
+{
+ u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+ u16 pid = le16_to_cpu(udev->descriptor.idProduct);
+ int i, flags = 0;
+
+ mutex_lock(&quirk_mutex);
+
+ for (i = 0; i < quirk_count; i++) {
+ if (vid == quirk_list[i].vid && pid == quirk_list[i].pid) {
+ flags = quirk_list[i].flags;
+ break;
+ }
+ }
+
+ mutex_unlock(&quirk_mutex);
+
+ return flags;
+}
+
/*
* Detect any quirks the device has, and do any housekeeping for it if needed.
*/
void usb_detect_quirks(struct usb_device *udev)
{
- udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
+ udev->quirks = usb_detect_static_quirks(udev, usb_quirk_list);
/*
* Pixart-based mice would trigger remote wakeup issue on AMD
* Yangtze chipset, so set them as RESET_RESUME flag.
*/
if (usb_amd_resume_quirk(udev))
- udev->quirks |= __usb_detect_quirks(udev,
+ udev->quirks |= usb_detect_static_quirks(udev,
usb_amd_resume_quirk_list);
+ udev->quirks ^= usb_detect_dynamic_quirks(udev);
+
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
@@ -372,7 +531,7 @@ void usb_detect_interface_quirks(struct usb_device *udev)
{
u32 quirks;
- quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
+ quirks = usb_detect_static_quirks(udev, usb_interface_quirk_list);
if (quirks == 0)
return;
@@ -380,3 +539,11 @@ void usb_detect_interface_quirks(struct usb_device *udev)
quirks);
udev->quirks |= quirks;
}
+
+void usb_release_quirk_list(void)
+{
+ mutex_lock(&quirk_mutex);
+ kfree(quirk_list);
+ quirk_list = NULL;
+ mutex_unlock(&quirk_mutex);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2f5fbc56a9dd..0adb6345ff2e 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1259,6 +1259,7 @@ static void __exit usb_exit(void)
if (usb_disabled())
return;
+ usb_release_quirk_list();
usb_deregister_device_driver(&usb_generic_driver);
usb_major_cleanup();
usb_deregister(&usbfs_driver);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 149cc7480971..546a2219454b 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -36,6 +36,7 @@ extern void usb_deauthorize_interface(struct usb_interface *);
extern void usb_authorize_interface(struct usb_interface *);
extern void usb_detect_quirks(struct usb_device *udev);
extern void usb_detect_interface_quirks(struct usb_device *udev);
+extern void usb_release_quirk_list(void);
extern int usb_remove_device(struct usb_device *udev);
extern int usb_get_device_descriptor(struct usb_device *dev,
|
|
With the commit 1ba8f9d30817 ("ALSA: hda: Add a power_save
blacklist"), we changed the default value of power_save option to -1
for processing the power-save blacklist.
Unfortunately, this seems breaking user-space applications that
actually read the power_save parameter value via sysfs and judge /
adjust the power-saving status. They see the value -1 as if the
power-save is turned off, although the actual value is taken from
CONFIG_SND_HDA_POWER_SAVE_DEFAULT and it can be a positive.
So, overall, passing -1 there was no good idea. Let's partially
revert it -- at least for power_save option default value is restored
again to CONFIG_SND_HDA_POWER_SAVE_DEFAULT. Meanwhile, in this patch,
we keep the blacklist behavior and make is adjustable via the new
option, pm_blacklist.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073
Fixes: 1ba8f9d30817 ("ALSA: hda: Add a power_save blacklist")
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
phy: for 4.16-rc
*) Fix a Kbuild failure in qcom-ufs
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The parameter, dev_id, of tcpci_irq should be tcpci_chip.
Remove definition of TCPC_CC_STATUS_DRPRST in tcpci.h.
Fixes: 8f9439022648("staging: typec: handle vendor defined part and modify drp toggling flow")
Signed-off-by: ShuFan Lee <shufan_lee@richtek.com>
Reviewed-by: Li Jun <jun.li@nxp.com>
Tested-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory
Encryption.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The AXP223 PMIC, like the AXP221, does not generate VBUS change
interrupts when N_VBUSEN is used to drive VBUS for the OTG port
on the board.
This was not noticed until recently, as most A23/A33 boards use
a GPIO pin that does not support interrupts for OTG ID detection.
This forces the driver to use polling. However the A33-OlinuXino
uses a pin that does support interrupts, so the driver uses them.
However the VBUS interrupt never fires, and the driver never gets
to update the VBUS status. This results in musb timing out waiting
for VBUS to rise.
This was worked around for the AXP221 by resorting to polling
changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for
missing Vbus det interrupts on A31"). This patch adds the A23 and
A33 to the list of SoCs that need the workaround.
Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the
sun8i-a33 SoC")
Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the
sun8i-a23 SoC")
Cc: <stable@vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb:
Use of_match_node to get model specific config data
Cc: <stable@vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb:
Fix optional gpios failing probe
Cc: <stable@vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb:
Fix irq free conditions to match request conditions
Cc: <stable@vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb:
Add workaround for missing Vbus det interrupts on A31
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
While the specific UFS PHY drivers (14nm and 20nm) have a module
license, the common base module does not, leading to a Kbuild
failure:
WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o
FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable'
This adds a module description and license tag to fix the build.
I added both Yaniv and Vivek as authors here, as Yaniv sent the initial
submission, while Vivek did most of the work since.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"Yet another pile of melted spectrum related updates:
- Drop native vsyscall support finally as it causes more trouble than
benefit.
- Make microcode loading more robust. There were a few issues
especially related to late loading which are now surfacing because
late loading of the IB* microcodes addressing spectre issues has
become more widely used.
- Simplify and robustify the syscall handling in the entry code
- Prevent kprobes on the entry trampoline code which lead to kernel
crashes when the probe hits before CR3 is updated
- Don't check microcode versions when running on hypervisors as they
are considered as lying anyway.
- Fix the 32bit objtool build and a coment typo"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
x86/pti: Fix a comment typo
x86/microcode: Synchronize late microcode loading
x86/microcode: Request microcode on the BSP
x86/microcode/intel: Look into the patch cache first
x86/microcode: Do not upload microcode if CPUs are offline
x86/microcode/intel: Writeback and invalidate caches before updating microcode
x86/microcode/intel: Check microcode revision before updating sibling threads
x86/microcode: Get rid of struct apply_microcode_ctx
x86/spectre_v2: Don't check microcode versions when running under hypervisors
x86/vsyscall/64: Drop "native" vsyscalls
x86/entry/64/compat: Save one instruction in entry_INT80_compat()
x86/entry: Do not special-case clone(2) in compat entry
x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
x86/syscalls: Use proper syscall definition for sys_ioperm()
x86/entry: Remove stale syscall prototype
x86/syscalls/32: Simplify $entry == $compat entries
objtool: Fix 32-bit build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Just a single fix which adds a missing Kconfig dependency to avoid
unmet dependency warnings"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS/MCE:
- Serialize sysfs changes to avoid concurrent modificaiton of
underlying data
- Add microcode revision to Machine Check records. This should have
been there forever, but now with the broken microcode versions in
the wild it has become important"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE: Serialize sysfs changes
x86/MCE: Save microcode revision in machine check records
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Another set of perf updates:
- Fix a Skylake Uncore event format declaration
- Prevent perf pipe mode from crahsing which was caused by a missing
buffer allocation
- Make the perf top popup message which tells the user that it uses
fallback mode on older kernels a debug message.
- Make perf context rescheduling work correcctly
- Robustify the jump error drawing in perf browser mode so it does
not try to create references to NULL initialized offset entries
- Make trigger_on() robust so it does not enable the trigger before
everything is set up correctly to handle it
- Make perf auxtrace respect the --no-itrace option so it does not
try to queue AUX data for decoding.
- Prevent having different number of field separators in CVS output
lines when a counter is not supported.
- Make the perf kallsyms man page usage behave like it does for all
other perf commands.
- Synchronize the kernel headers"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ctx_event_type in ctx_resched()
perf tools: Fix trigger class trigger_on()
perf auxtrace: Prevent decoding when --no-itrace
perf stat: Fix CVS output format for non-supported counters
tools headers: Sync x86's cpufeatures.h
tools headers: Sync copy of kvm UAPI headers
perf record: Fix crash in pipe mode
perf annotate browser: Be more robust when drawing jump arrows
perf top: Fix annoying fallback message on older kernels
perf kallsyms: Fix the usage on the man page
perf/x86/intel/uncore: Fix Skylake UPI event format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"rt_mutex_futex_unlock() grew a new irq-off call site, but the function
assumes that its always called from irq enabled context.
Use (un)lock_irqsafe() to handle the new call site correctly"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates for 4.16-rc5 from Marc Zyngier
- IMX GPCv2 cleanup
- GICv3 iomem annontation fixes
- GICv3 ITS minimal ITE allocation now matching the LPIs'.
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two small fixes are for this cycle:
- fix max_chunk_size for rcar-dmac for R-Car Gen3
- fix clock resource of mv_xor_v2"
* tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"This is a single GPIO fix for the v4.16 series affecting the Renesas
driver, and fixes wakeup from external stuff"
* tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: rcar: Use wakeup_path i.s.o. explicit clock handling
|
|
On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.
With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
